summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-07-05bnx2x: PFC fixesYaniv Rosner
Set the source MAC address for PFC packets and update its status during PMF migration. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04net/wireless: ipw2x00: Use helpers from linux/etherdevice.hTobias Klauser
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04net: vxge: Use is_multicast_ether_addr helperTobias Klauser
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04net: ewrk3: Use helpers from linux/etherdevice.hTobias Klauser
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04net: depca: Use helpers from linux/etherdevice.hTobias Klauser
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04net: rionet: Use is_multicast_ether_addrTobias Klauser
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04net: iseries_veth: Use is_unicast_ether_addr helperTobias Klauser
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04net: igb: Use is_multicast_ether_addr helperTobias Klauser
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04net: de4x5: Use helpers from linux/etherdevice.hTobias Klauser
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04net: e1000e: Use is_multicast_ether_addr helperTobias Klauser
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-04b44: use dev_kfree_skb() in b44_tx()Eric Dumazet
b44_tx() is run from softirq handler, it can use dev_kfree_skb() instead of dev_kfree_skb_irq() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-03net: sh_eth: remove __flush_purge_regionYoshihiro Shimoda
It is a function of SuperH architecture. There is no good to use the function on a driver generally. So, the driver uses dma_map_single() instead of __flush_purge_region. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01Merge branch 'for-next' of ↵David S. Miller
git://git2.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan
2011-07-01net: de4x5: Omit check for multicast bit in netdev_for_each_mc_addrTobias Klauser
There is no need to check for the address being a multicast address in the netdev_for_each_mc_addr loop, so remove it. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-30be2net: clear intr bit in be_probe()Sathya Perla
It may be set in the card while the driver is probed by kdump kernel after a crash. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-30be2net: create/destroy rx-queues on interface open/closeSathya Perla
On some skews, the BE card sends pause frames (and not drop pkts) if there are no more posted buffers available for packet reception. This behaviour has a side effect: When an interface is disabled, buffers are no longer posted on the corresponding RX rings. All broadcast and multicast traffic being received on the port will quickly fill up the PMEM and cause pause push back. As the PMEM is shared by both the ports, all traffic being received on the other (enabled) port also gets stalled. The fix is to destroy RX rings when the interface is disabled. If there is no RX ring match in the RXF lookup, the packets are discarded and so don't hog the PMEM. The RXQ creation cmd must now use MCC instead of MBOX as they are are called post MCC queue creation. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-30be2net: fix certain cmd failure loggingSathya Perla
Some (older)versions of cards/fw may not recognize certain cmds and return illegal/unsupported errors. As long as the driver can handle this gracefully there is no need to log an error msg. Also finetuned 2 existing error log messages. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-30qlcnic: add external loopback supportAmit Kumar Salecha
o Add external loopback test in self test: - Send set external loopback mode request to fw. To quiscent other storage functions. - Perform test - Send unset loopback mode request to fw. o Rename ilb to lb. o Update driver version 5.0.20. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-30net: ucc_geth: Omit check for multicast bit in netdev_for_each_mc_addrTobias Klauser
There is no need to check for the address being a multicast address in the netdev_for_each_mc_addr loop, so remove it. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-30net: iseries_veth: Omit check for multicast bit in netdev_for_each_mc_addrTobias Klauser
There is no need to check for the address being a multicast address in the netdev_for_each_mc_addr loop, so remove it. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-30net: depca: Omit check for multicast bit in netdev_for_each_mc_addrTobias Klauser
There is no need to check for the address being a multicast address in the netdev_for_each_mc_addr loop, so remove it. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-30net: am79c961a: Omit check for multicast bit in netdev_for_each_mc_addrTobias Klauser
There is no need to check for the address being a multicast address in the netdev_for_each_mc_addr loop, so remove it. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-30wanxl: remove a stray irq enableDan Carpenter
This is error path calls unlock_irq() where we haven't disabled the IRQs. The comment says that this error path can never happen. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-30Exclude duplicated checking for iface-up. This flags is checked in ↵Alexander Smirnov
'is_skb_forwardable' function, which is subroutine of 'dev_forward_skb'. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-30jme: Cleanup PM operations after using new PM APIGuo-Fu Tseng
1. Using enum name instead of numeric value. 2. device_set_wakeup_enable expect bool argument adding !!() to the argument to be passed. 3. Remove non-jme-hardware related operations from jme_clear_pm() 4. Reuse jme_clear_pm() in jme_resume() and jme_powersave_phy() Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-30jme: Fix compile warning introduced by new pm macroGuo-Fu Tseng
SIMPLE_DEV_PM_OPS is using SET_SYSTEM_SLEEP_PM_OPS and SET_SYSTEM_SLEEP_PM_OPS is empty when CONFIG_PM_SLEEP is not defined. Switching #ifdef CONFIG_PM to #ifdef CONFIG_PM_SLEEP Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-30can: remove useless defaults in KconfigKurt Van Dijck
There's no need for "default N' (or 'default n') as it's default. Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-30enic: Add support to configure hardware interrupt coalesce timers in a ↵Vasanthy Kolluri
platform independent way enic driver and the underlying hardware use different units for representing the interrupt coalesce timer. Driver converts the interrupt coalesce timer in usec to hardware cycles while setting the relevant hardware registers. The conversion factor can be different for each of the adapter hardware types. So it is dynamically learnt from the adapter firmware using the devcmd CMD_INTR_COAL_CONVERT. This allows the driver to configure the hardware interrupt coalesce timers in a platform independent way. Signed-off-by: Danny Guo <dannguo@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@conan.davemloft.net>
2011-06-30virtio-net: per cpu 64 bit stats (v2)stephen hemminger
Use per-cpu variables to maintain 64 bit statistics. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@conan.davemloft.net>
2011-06-30xen/netback: Add module alias for autoloadingBastian Blank
Add xen-backend:vif module alias to the xen-netback module. This allows automatic loading of the module. Signed-off-by: Bastian Blank <waldi@debian.org> Acked-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-06-30IEEE 802.15.4: do not enable driver debugging by defaultWerner Almesberger
The IEEE 802.15.4 drivers were compiled by default with debugging, which caused them to be rather chatty and slow. This patch silences them. People debugging drivers can still add a #define DEBUG in the beginning of the respective file or use dynamic debug This patch also removes the now unused option CONFIG_FFD. Signed-off-by: Werner Almesberger <werner@almesberger.net> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2011-06-30fakehard: stop setting platform_data as it's unused anymoreDmitry Eremin-Solenikov
Previously dev.platform_data was used to store a pointer to net device. Now this code was gone. Drop it. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2011-06-29myri10ge: update versionJon Mason
Update version and copyright Signed-off-by: Jon Mason <mason@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-29myri10ge: misc style cleanupsJon Mason
Miscellaneous white space, style, and other cleanups v2 includes corrections from Joe Perches Signed-off-by: Jon Mason <mason@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-29myri10ge: remove unnecessary read of PCI_CAP_ID_EXPJon Mason
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Signed-off-by: Jon Mason <mason@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-29myri10ge: add support for set_phys_idJon Mason
Add myri10ge driver support for the ethtool identify operation. NOTE: Rather than blinking (which is the normal case), when identify is used, the yellow LED turns solid. Signed-off-by: Jon Mason <mason@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-29myri10ge: allow small_bytes = 0Jon Mason
Allow page-based receive to work when small_bytes is set to 0. Signed-off-by: Jon Mason <mason@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-29myri10ge: rework parity error check and cleanupJon Mason
Clean up watchdog reset code: - move code that checks for stuck slice to a common routine - unless there is a confirmed h/w fault, verify that a stuck slice is still stuck in the watchdog worker; if the slice is no longer stuck, abort the reset. - this removes an egregious 2000ms pause in the watchdog worker that was a diagnostic aid (to look for spurious resets) the snuck into production code. v3 includes corrections from Joe Perches Signed-off-by: Jon Mason <mason@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-29myri10ge: Mask PCI Surprise Link Down EventsJon Mason
A SRAM parity error can cause a surprise link down. Since We can recover from SRAM parity errors, mask PCI surprise down events. Signed-off-by: Jon Mason <mason@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-29myri10ge: ensure tx queues remain stoppedJon Mason
Ensure that our tx queues remain stopped when we stop them in myri10ge_close(). Not doing so can potentially lead to traffic being transmitted when the interface is removed, which can lead to NULL pointer dereferences. Signed-off-by: Jon Mason <mason@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-29caif: Fix recieve/receive typoJoe Perches
Just spelling fixes. Actually, a twofer with vaiables/variables as well. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-29net: include dma-mapping.h in ll_temac_main.c for dma_map_single etcStephen Rothwell
fixes thses build errors: drivers/net/ll_temac_main.c: In function 'temac_dma_bd_release': drivers/net/ll_temac_main.c:209:4: error: implicit declaration of function 'dma_unmap_single' drivers/net/ll_temac_main.c:215:3: error: implicit declaration of function 'dma_free_coherent' drivers/net/ll_temac_main.c: In function 'temac_dma_bd_init': drivers/net/ll_temac_main.c:243:2: error: implicit declaration of function 'dma_alloc_coherent' drivers/net/ll_temac_main.c:243:14: warning: assignment makes pointer from integer without a cast drivers/net/ll_temac_main.c:251:14: warning: assignment makes pointer from integer without a cast drivers/net/ll_temac_main.c:280:3: error: implicit declaration of function 'dma_map_single' drivers/net/ll_temac_main.c: In function 'temac_start_xmit_done': drivers/net/ll_temac_main.c:628:22: warning: cast to pointer from integer of different size Caused by commit commit b7f080cfe223 ("net: remove mm.h inclusion from netdevice.h"). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-29net: include io.h in sja1000_of_platform.c for iounmap etcStephen Rothwell
fixes these build errors: drivers/net/can/sja1000/sja1000_of_platform.c: In function 'sja1000_ofp_read_reg': drivers/net/can/sja1000/sja1000_of_platform.c:61:2: error: implicit declaration of function 'in_8' drivers/net/can/sja1000/sja1000_of_platform.c: In function 'sja1000_ofp_write_reg': drivers/net/can/sja1000/sja1000_of_platform.c:67:2: error: implicit declaration of function 'out_8' drivers/net/can/sja1000/sja1000_of_platform.c: In function 'sja1000_ofp_remove': drivers/net/can/sja1000/sja1000_of_platform.c:81:2: error: implicit declaration of function 'iounmap' drivers/net/can/sja1000/sja1000_of_platform.c: In function 'sja1000_ofp_probe': drivers/net/can/sja1000/sja1000_of_platform.c:113:2: error: implicit declaration of function 'ioremap_nocache' drivers/net/can/sja1000/sja1000_of_platform.c:113:7: warning: assignment makes pointer from integer without a cast Caused by commit b7f080cfe223 ("net: remove mm.h inclusion from netdevice.h"). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-27vmxnet3: Enable GRO support.Jesse Gross
When receiving packets from another guest on the same hypervisor, it's generally possible to receive large packets because no segmentation is necessary and these packets are handled by LRO. However, when doing routing or bridging we must disable LRO and lose this benefit. In these cases GRO can still be used and it is very effective because the packets which are segmented in the hypervisor are received very close together and can easily be merged. CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: Scott Goldman <scottjg@vmware.com> CC: VMware PV-Drivers <pv-drivers@vmware.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Scott J. Goldman <scottjg@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-27vxge: remove unnecessary reads of PCI_CAP_ID_EXPJon Mason
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-27sky2: remove unnecessary reads of PCI_CAP_ID_EXPJon Mason
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Also, pci_is_pcie is a better way of determining if the device is PCIE or not (as it uses the same saved PCIE capability offset). Signed-off-by: Jon Mason <jdmason@kudzu.us> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-27r8169: remove unnecessary read of PCI_CAP_ID_EXPJon Mason
The PCIE capability offset is saved during PCI bus walking. Use the value from pci_dev instead of checking in the driver and saving it off the the driver specific structure. Also, it will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-27niu: remove unnecessary read of PCI_CAP_ID_EXPJon Mason
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-27bnx2x: remove unnecessary read of PCI_CAP_ID_EXPJon Mason
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Also, pci_is_pcie is a better way of determining if the device is PCIE or not (as it uses the same saved PCIE capability offset). Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-27bnx2: remove unnecessary read of PCI_CAP_ID_EXPJon Mason
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Also, pci_is_pcie is a better way of determining if the device is PCIE or not (as it uses the same saved PCIE capability offset). Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 08:54:21 +0000