summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-03-02USB: musb: only print info message if probe() is successfulFelipe Balbi
we were printing the info about musb probe too early where it was still possible for things to go wrong. Move the down right before the return 0 statement. While at that also convert pr_info to dev_info. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: musb: unmap base if we can't probeFelipe Balbi
when probe() fails, we should iounmap() the mapped address. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: musb: tusb6010: use resource_sizeFelipe Balbi
Trivial patch, no functional changes. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: musb: we already tested for dyn_fifoFelipe Balbi
... and even added a flag to struct musb, so let's use that. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: musb: get rid of omap_readl/writelFelipe Balbi
we have those addresses already ioremaped, so let's use our __raw_readl/writel wrappers. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02usb: musb: Add context save and restore supportAjay Kumar Gupta
Adding support for MUSB register save and restore during system suspend and resume. Changes: - Added musb_save/restore_context() functions - Added platform specific musb_platform_save/restore_context() to handle platform specific jobs. - Maintaining BlackFin compatibility by adding read/write functions for registers which are not available in BlackFin Tested system suspend and resume on OMAP3EVM board. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: remove obsolete config in kernel source (USB_HCD_DMA)Christoph Egger
The configuration Option USB_HCD_DMA is not reachable in KConfig so this piece of Code is effectively dead and useless. Remove it to avoid confusion. Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: usbfs_snoop: add data logging back inChris Frey
Uses the new snoop function from commit 4c6e8971cbe0148085, but includes the buffer data where appropriate, as before. Signed-off-by: Chris Frey <cdfrey@foursquare.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: s3c-hsotg: Staticise non-exported functionsMark Brown
Keeps sparse happy if nothing else. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: trivial: missing newline in usb core warning messageThadeu Lima de Souza Cascardo
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: ftdi_sio: correct spelling in implementation fileAndreas Mohr
- correct spelling - correct non-tabbed .tiocmget/.tiocmset entries Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: ftdi_sio: correct spelling in header filesAndreas Mohr
- correct spelling/whitespace in ftdi_sio.h and ftdi_sio_ids.h Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: serial: Eliminate useless codeJulia Lawall
The variables priv and portdata are initialized twice to the same (side effect-free) expressions. Drop one initialization in each case. A simplified version of the semantic match that finds this problem is: (http://coccinelle.lip6.fr/) // <smpl> @forall@ idexpression *x; identifier f!=ERR_PTR; @@ x = f(...) ... when != x ( x = f(...,<+...x...+>,...) | * x = f(...) ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: gadget: Add DEVTYPE support for Ethernet functionsMarcel Holtmann
The problem with Ethernet based networking devices is to clearly identify what's their usage. Special interfaces like bridges, WiFi, Bluetooth, WiMAX or WWAN are already using DEVTYPE identification. This patch marks the Ethernet functions of gadgets from the device type "gadget". Automatic setup of these interfaces can now happen from userspace without the need of hardcoding the network interface name. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: remove the berry_charge driverGreg Kroah-Hartman
The Barry project's userspace program, bcharge, can better handle this device and functionality, and it also works with the latest phones, which this driver does not support. So remove it, as the userspace code should be used instead. Cc: Chris Frey <cdfrey@foursquare.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: BKL removal from ioctl path of usbfsOliver Neukum
Total removal from the ioctl code path except for the outcall to external modules. Locking is ensured by the normal locks of usbfs. Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: BKL removal: frontierOliver Neukum
BKL was not needed at all. Removed without replacement. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: BKL removal: vstusbOliver Neukum
BKL was not needed at all. Removed without replacement. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: BKL removal: legousbtowerOliver Neukum
BKL was not needed at all. Removed without replacement. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: BKL removal: ldusbOliver Neukum
BKL was not needed at all. Removed without replacement. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: BKL removal: ftdi-elanOliver Neukum
BKL was not needed at all. Removed without replacement. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: BKL removal: adutuxOliver Neukum
BKL was not needed at all. Removed without replacement. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: BKL removal: idmouseOliver Neukum
BKL was not needed at all. Removed without replacement. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: BKL removal: rio500Oliver Neukum
This driver had used BKL to guard against disconnect but was incorrectly converted leaving an SMP race. BKL was added to disconnect() to fix this race BKL was removed from ioctl() as the mutex is sufficient on its own. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: BKL removal: mdc800Oliver Neukum
BKL not needed at all. Removed without replacement. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: BKL removal: cdc-wdmOliver Neukum
BKL not needed at all. Removed without replacement. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: BKL removal: usbtmcOliver Neukum
BKL not needed at all. Removed without replacement. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: BKL removal: usb-skeletonOliver Neukum
BKL not needed at all. Removed without replacement. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02usb: BKL removal: usblpOliver Neukum
BKL was not needed at all. Removed without replacement. Signed-off-by: Oliver Neukum <oliver@neukum.org> Acked-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: isight-firmware: declare MODULE_FIRMWAREBen Hutchings
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: Reduce scope of BKL in usb ioctl handlingOliver Neukum
This pushes BKL down in ioctl handling and drops it for some important ioctls Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: Push BKL on open down into the driversOliver Neukum
Straightforward push into the drivers to allow auditing individual drivers separately Signed-off-by: Oliver Neukum <oliver@neukum.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: Remove BKL from lseek implementationsOliver Neukum
Replace it by mutex_lock(&file->f_dentry->d_inode->i_mutex); following the example of the generic method Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: Remove BKL from usbdev_open()Oliver Neukum
Locking had long been changed making BKL redundant. Simply remove it. Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: Remove BKL from poll()Oliver Neukum
Replace BKL with usbfs_mutex to protect a global counter and a per file data structure Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: atm: Use FIELD_SIZEOF, trivial cleanup.Thiago Farina
Signed-off-by: Thiago Farina <tfransosi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: serial: option.c: Add 4G W14 stick to blacklist for option_send_setupGernot Hillier
The 4G XS Stick W14 seems to not understand RTS/DTR setting in option_send_setup causing long timeouts on any open() which disturbs a lot of well-known userspace applications like minicom or ModemManager. Therefore, we enable OPTION_BLACKLIST_SENDSETUP blacklisting for it. Signed-off-by: Gernot Hillier <gernot@hillier.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: serial: option.c: Add blacklisting infrastructure for special device ↵Gernot Hillier
handling As suggested by Matthias Urlichs, this patch adds a somehow generic mechanism for special handling of devices which don't support all bits expected by this driver. The blacklisting code is heavily stolen from sierra.c, but extended to support different special cases. For now, one case is implemented (OPTION_BLACKLIST_SENDSETUP), targeted at the 4G W14 device: devices which don't understand the setting of RTS/DTR in option_send_setup() causing a USB timeout of 5 s in any userspace open() which leads to errors in most userspace applications. In addition, I prepared another case for devices with interfaces which shall not be accessed by this driver (targeted at the D-Link DWM 652). However, OPTION_BLACKLIST_RESERVED_IF is not fully implemented yet as I have no device to test this. Anyone volunteering to help here? If not, I'll contact the guys who added D-Link DWM 652 support soon. Signed-off-by: Gernot Hillier <gernot@hillier.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: serial: option.c: Add chipset information for 4G W14Gernot Hillier
Carsten Juttner thankfully investigated a bit and found out some details about the chipset used in the 4G W14 device I recently added to option.c. I think this information is useful for reference, so I'd be happy if you could include those bits. Signed-off-by: Gernot Hillier <gernot@hillier.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB goku_udc: make PCI device id constantNémeth Márton
The id_table field of the struct pci_driver is constant in <linux/pci.h> so it is worth to make pci_ids also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Németh Márton <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB gadget: make Open Firmware device id constantNémeth Márton
The match_table field of the struct of_device_id is constant in <linux/of_platform.h> so it is worth to make ace_of_match also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Németh Márton <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB host: make Open Firmware device id constantNémeth Márton
The match_table field of the struct of_device_id is constant in <linux/of_platform.h> so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Németh Márton <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB hub: make USB device id constantNémeth Márton
The id_table field of the struct usb_device_id is constant in <linux/usb.h> so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Németh Márton <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB misc: make USB device id constantNémeth Márton
The id_table field of the struct usb_device_id is constant in <linux/usb.h> so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Németh Márton <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB image: make USB device id constantNémeth Márton
The id_table field of the struct usb_device_id is constant in <linux/usb.h> so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Németh Márton <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB serial: make USB device id constantNémeth Márton
The id_table field of the struct usb_device_id is constant in <linux/usb.h> so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Németh Márton <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB class: make USB device id constantNémeth Márton
The id_table field of the struct usb_device_id is constant in <linux/usb.h> so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Németh Márton <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB skeleton: make USB device id constantNémeth Márton
The id_table field of the struct usb_device_id is constant in <linux/usb.h> so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Németh Márton <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: musb: don't dereference NULL tusb_dma in dma_controller_destroy()Roel Kluin
Test whether tusb_dma is not NULL before dereferencing Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02USB: Move hcd free_dev call into usb_disconnect to fix oopsHerbert Xu
USB: Move hcd free_dev call into usb_disconnect I found a way to oops the kernel: 1. Open a USB device through devio. 2. Remove the hcd module in the host kernel. 3. Close the devio file descriptor. The problem is that closing the file descriptor does usb_release_dev as it is the last reference. usb_release_dev then tries to invoke the hcd free_dev function (or rather dereferencing the hcd driver struct). This causes an oops as the hcd driver has already been unloaded so the struct is gone. This patch tries to fix this by bringing the free_dev call earlier and into usb_disconnect. I have verified that repeating the above steps no longer crashes with this patch applied. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 16:52:03 +0000