summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-11-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Minor conflict in drivers/s390/net/qeth_l2_main.c, kept the lock from commit c8183f548902 ("s390/qeth: fix potential deadlock on workqueue flush"), removed the code which was removed by commit 9897d583b015 ("s390/qeth: consolidate some duplicated HW cmd code"). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Validate tunnel options length in act_tunnel_key, from Xin Long. 2) Fix DMA sync bug in gve driver, from Adi Suresh. 3) TSO kills performance on some r8169 chips due to HW issues, disable by default in that case, from Corinna Vinschen. 4) Fix clock disable mismatch in fec driver, from Chubong Yuan. 5) Fix interrupt status bits define in hns3 driver, from Huazhong Tan. 6) Fix workqueue deadlocks in qeth driver, from Julian Wiedmann. 7) Don't napi_disable() twice in r8152 driver, from Hayes Wang. 8) Fix SKB extension memory leak, from Florian Westphal. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits) r8152: avoid to call napi_disable twice MAINTAINERS: Add myself as maintainer of virtio-vsock udp: drop skb extensions before marking skb stateless net: rtnetlink: prevent underflows in do_setvfinfo() can: m_can_platform: remove unnecessary m_can_class_resume() call can: m_can_platform: set net_device structure as driver data hv_netvsc: Fix send_table offset in case of a host bug hv_netvsc: Fix offset usage in netvsc_send_table() net-ipv6: IPV6_TRANSPARENT - check NET_RAW prior to NET_ADMIN sfc: Only cancel the PPS workqueue if it exists nfc: port100: handle command failure cleanly net-sysfs: fix netdev_queue_add_kobject() breakage r8152: Re-order napi_disable in rtl8152_close net: qca_spi: Move reset_count to struct qcaspi net: qca_spi: fix receive buffer size check net/ibmvnic: Ignore H_FUNCTION return from H_EOI to tolerate XIVE mode Revert "net/ibmvnic: Fix EOI when running in XIVE mode" net/mlxfw: Verify FSM error code translation doesn't exceed array size net/mlx5: Update the list of the PCI supported devices net/mlx5: Fix auto group size calculation ...
2019-11-22net: dsa: ocelot: fix "should it be static?" warningsChen Wandun
Fix following sparse warnings: drivers/net/dsa/ocelot/felix.c:351:6: warning: symbol 'felix_txtstamp' was not declared. Should it be static? Signed-off-by: Chen Wandun <chenwandun@huawei.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-22r8152: avoid to call napi_disable twiceHayes Wang
Call napi_disable() twice would cause dead lock. There are three situations may result in the issue. 1. rtl8152_pre_reset() and set_carrier() are run at the same time. 2. Call rtl8152_set_tunable() after rtl8152_close(). 3. Call rtl8152_set_ringparam() after rtl8152_close(). For #1, use the same solution as commit 84811412464d ("r8152: Re-order napi_disable in rtl8152_close"). For #2 and #3, add checking the flag of IFF_UP and using napi_disable/napi_enable during mutex. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-22Merge tag 'drm-fixes-2019-11-22' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Two sets of fixes in here, one for amdgpu, and one for i915. The amdgpu ones are pretty small, i915's CI system seems to have a few problems in the last week or so, there is one major regression fix for fb_mmap, but there are a bunch of other issues fixed in there as well, oops, screen flashes and rcu related. amdgpu: - Remove experimental flag for navi14 - Fix confusing power message failures on older VI parts - Hang fix for gfxoff when using the read register interface - Two stability regression fixes for Raven i915: - Fix kernel oops on dumb_create ioctl on no crtc situation - Fix bad ugly colored flash on VLV/CHV related to gamma LUT update - Fix unity of the frequencies reported on PMU - Fix kernel oops on set_page_dirty using better locks around it - Protect the request pointer with RCU to prevent it being freed while we might need still - Make pool objects read-only - Restore physical addresses for fb_map to avoid corrupted page table" * tag 'drm-fixes-2019-11-22' of git://anongit.freedesktop.org/drm/drm: drm/i915/fbdev: Restore physical addresses for fb_mmap() Revert "drm/amd/display: enable S/G for RAVEN chip" drm/amdgpu: disable gfxoff on original raven drm/amdgpu: disable gfxoff when using register read interface drm/amd/powerplay: correct fine grained dpm force level setting drm/amd/powerplay: issue no PPSMC_MSG_GetCurrPkgPwr on unsupported ASICs drm/amdgpu: remove experimental flag for Navi14 drm/i915: make pool objects read-only drm/i915: Protect request peeking with RCU drm/i915/userptr: Try to acquire the page lock around set_page_dirty() drm/i915/pmu: "Frequency" is reported as accumulated cycles drm/i915: Preload LUTs if the hw isn't currently using them drm/i915: Don't oops in dumb_create ioctl if we have no crtcs
2019-11-22can: m_can_platform: remove unnecessary m_can_class_resume() callPankaj Sharma
The function m_can_runtime_resume() is getting recursively called from m_can_class_resume(). This results in a lock up. We need not call m_can_class_resume() during m_can_runtime_resume(). Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Signed-off-by: Pankaj Sharma <pankj.sharma@samsung.com> Signed-off-by: Sriram Dash <sriram.dash@samsung.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-22can: m_can_platform: set net_device structure as driver dataPankaj Sharma
The current code is failing during clock prepare enable because of not getting proper clock from platform device. [ 0.852089] Call trace: [ 0.854516] 0xffff0000fa22a668 [ 0.857638] clk_prepare+0x20/0x34 [ 0.861019] m_can_runtime_resume+0x2c/0xe4 [ 0.865180] pm_generic_runtime_resume+0x28/0x38 [ 0.869770] __rpm_callback+0x16c/0x1bc [ 0.873583] rpm_callback+0x24/0x78 [ 0.877050] rpm_resume+0x428/0x560 [ 0.880517] __pm_runtime_resume+0x7c/0xa8 [ 0.884593] m_can_clk_start.isra.9.part.10+0x1c/0xa8 [ 0.889618] m_can_class_register+0x138/0x370 [ 0.893950] m_can_plat_probe+0x120/0x170 [ 0.897939] platform_drv_probe+0x4c/0xa0 [ 0.901924] really_probe+0xd8/0x31c [ 0.905477] driver_probe_device+0x58/0xe8 [ 0.909551] device_driver_attach+0x68/0x70 [ 0.913711] __driver_attach+0x9c/0xf8 [ 0.917437] bus_for_each_dev+0x50/0xa0 [ 0.921251] driver_attach+0x20/0x28 [ 0.924804] bus_add_driver+0x148/0x1fc [ 0.928617] driver_register+0x6c/0x124 [ 0.932431] __platform_driver_register+0x48/0x50 [ 0.937113] m_can_plat_driver_init+0x18/0x20 [ 0.941446] do_one_initcall+0x4c/0x19c [ 0.945259] kernel_init_freeable+0x1d0/0x280 [ 0.949591] kernel_init+0x10/0x100 [ 0.953057] ret_from_fork+0x10/0x18 [ 0.956614] Code: 00000000 00000000 00000000 00000000 (fa22a668) [ 0.962681] ---[ end trace 881f71bd609de763 ]--- [ 0.967301] Kernel panic - not syncing: Attempted to kill init! A device driver for CAN controller hardware registers itself with the Linux network layer as a network device. So, the driver data for m_can should ideally be of type net_device. Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Signed-off-by: Pankaj Sharma <pankj.sharma@samsung.com> Signed-off-by: Sriram Dash <sriram.dash@samsung.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-22virt_wifi: fix use-after-free in virt_wifi_newlink()Taehee Yoo
When virt_wifi interface is created, virt_wifi_newlink() is called and it calls register_netdevice(). if register_netdevice() fails, it internally would call ->priv_destructor(), which is virt_wifi_net_device_destructor() and it frees netdev. but virt_wifi_newlink() still use netdev. So, use-after-free would occur in virt_wifi_newlink(). Test commands: ip link add dummy0 type dummy modprobe bonding ip link add bonding_masters link dummy0 type virt_wifi Splat looks like: [ 202.220554] BUG: KASAN: use-after-free in virt_wifi_newlink+0x88b/0x9a0 [virt_wifi] [ 202.221659] Read of size 8 at addr ffff888061629cb8 by task ip/852 [ 202.222896] CPU: 1 PID: 852 Comm: ip Not tainted 5.4.0-rc5 #3 [ 202.223765] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 202.225073] Call Trace: [ 202.225532] dump_stack+0x7c/0xbb [ 202.226869] print_address_description.constprop.5+0x1be/0x360 [ 202.229362] __kasan_report+0x12a/0x16f [ 202.230714] kasan_report+0xe/0x20 [ 202.232595] virt_wifi_newlink+0x88b/0x9a0 [virt_wifi] [ 202.233370] __rtnl_newlink+0xb9f/0x11b0 [ 202.244909] rtnl_newlink+0x65/0x90 [ ... ] Cc: stable@vger.kernel.org Fixes: c7cdba31ed8b ("mac80211-next: rtnetlink wifi simulation device") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20191121122645.9355-1-ap420073@gmail.com [trim stack dump a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-11-21hv_netvsc: Fix send_table offset in case of a host bugHaiyang Zhang
If negotiated NVSP version <= NVSP_PROTOCOL_VERSION_6, the offset may be wrong (too small) due to a host bug. This can cause missing the end of the send indirection table, and add multiple zero entries from leading zeros before the data region. This bug adds extra burden on channel 0. So fix the offset by computing it from the data structure sizes. This will ensure netvsc driver runs normally on unfixed hosts, and future fixed hosts. Fixes: 5b54dac856cb ("hyperv: Add support for virtual Receive Side Scaling (vRSS)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21hv_netvsc: Fix offset usage in netvsc_send_table()Haiyang Zhang
To reach the data region, the existing code adds offset in struct nvsp_5_send_indirect_table on the beginning of this struct. But the offset should be based on the beginning of its container, struct nvsp_message. This bug causes the first table entry missing, and adds an extra zero from the zero pad after the data region. This can put extra burden on the channel 0. So, correct the offset usage. Also add a boundary check to ensure not reading beyond data region. Fixes: 5b54dac856cb ("hyperv: Add support for virtual Receive Side Scaling (vRSS)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21enetc: make enetc_setup_tc_mqprio staticMao Wenan
While using ARCH=mips CROSS_COMPILE=mips-linux-gnu- command to compile, make C=2 drivers/net/ethernet/freescale/enetc/enetc.o one warning can be found: drivers/net/ethernet/freescale/enetc/enetc.c:1439:5: warning: symbol 'enetc_setup_tc_mqprio' was not declared. Should it be static? This patch make symbol enetc_setup_tc_mqprio static. Fixes: 34c6adf1977b ("enetc: Configure the Time-Aware Scheduler via tc-taprio offload") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-22Merge tag 'drm-intel-fixes-2019-11-21' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix kernel oops on dumb_create ioctl on no crtc situation - Fix bad ugly colored flash on VLV/CHV related to gamma LUT update - Fix unity of the frequencies reported on PMU - Fix kernel oops on set_page_dirty using better locks around it - Protect the request pointer with RCU to prevent it being freed while we might need still - Make pool objects read-only - Restore physical addresses for fb_map to avoid corrupted page table Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191121165339.GA23920@intel.com
2019-11-21net: dsa: ocelot: add hardware timestamping support for FelixYangbo Lu
This patch is to reuse ocelot functions as possible to enable PTP clock and to support hardware timestamping on Felix. On TX path, timestamping works on packet which requires timestamp. The injection header will be configured accordingly, and skb clone requires timestamp will be added into a list. The TX timestamp is final handled in threaded interrupt handler when PTP timestamp FIFO is ready. On RX path, timestamping is always working. The RX timestamp could be got from extraction header. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21net: dsa: ocelot: define PTP registers for felix_vsc9959Yangbo Lu
This patch is to define PTP registers for felix_vsc9959. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21net: mscc: ocelot: convert to use ocelot_port_add_txtstamp_skb()Yangbo Lu
Convert to use ocelot_port_add_txtstamp_skb() for adding skbs which require TX timestamp into list. Export it so that DSA Felix driver could reuse it too. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21net: mscc: ocelot: convert to use ocelot_get_txtstamp()Yangbo Lu
The method getting TX timestamp by reading timestamp FIFO and matching skbs list is common for DSA Felix driver too. So move code out of ocelot_board.c, convert to use ocelot_get_txtstamp() function and export it. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21net: mscc: ocelot: export ocelot_hwstamp_get/set functionsYangbo Lu
Export ocelot_hwstamp_get/set functions so that DSA driver is able to reuse them. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21sfc: Only cancel the PPS workqueue if it existsMartin Habets
The workqueue only exists for the primary PF. For other functions we hit a WARN_ON in kernel/workqueue.c. Fixes: 7c236c43b838 ("sfc: Add support for IEEE-1588 PTP") Signed-off-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21Merge tag 'for-linus-20191121' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fix from Jens Axboe: "Just a single fix for an issue in nbd introduced in this cycle" * tag 'for-linus-20191121' of git://git.kernel.dk/linux-block: nbd:fix memory leak in nbd_get_socket()
2019-11-21Merge tag 'gpio-v5.4-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "A last set of small fixes for GPIO, this cycle was quite busy. - Fix debounce delays on the MAX77620 GPIO expander - Use the correct unit for debounce times on the BD70528 GPIO expander - Get proper deps for parallel builds of the GPIO tools - Add a specific ACPI quirk for the Terra Pad 1061" * tag 'gpio-v5.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpiolib: acpi: Add Terra Pad 1061 to the run_edge_events_on_boot_blacklist tools: gpio: Correctly add make dependencies for gpio_utils gpio: bd70528: Use correct unit for debounce times gpio: max77620: Fixup debounce delays
2019-11-21drivers: net: Fix Kconfig indentation, continuedKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style. This fixes various indentation mixups (seven spaces, tab+one space, etc). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21nfc: port100: handle command failure cleanlyOliver Neukum
If starting the transfer of a command suceeds but the transfer for the reply fails, it is not enough to initiate killing the transfer for the command may still be running. You need to wait for the killing to finish before you can reuse URB and buffer. Reported-and-tested-by: syzbot+711468aa5c3a1eabf863@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21octeontx2-af: Fix uninitialized variable in debugfsDan Carpenter
If rvu_get_blkaddr() fails, then this rvu_cgx_nix_cuml_stats() returns zero and we write some uninitialized data into the debugfs output. On the error paths, the use of the uninitialized "*stat" is harmless, but it will lead to a Smatch warning (static analysis) and a UBSan warning (runtime analysis) so we should prevent that as well. Fixes: f967488d095e ("octeontx2-af: Add per CGX port level NIX Rx/Tx counters") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21drm/i915/fbdev: Restore physical addresses for fb_mmap()Chris Wilson
fbdev uses the physical address of our framebuffer for its fb_mmap() routine. While we need to adapt this address for the new io BAR, we have to fix v5.4 first! The simplest fix is to restore the smem back to v5.3 and we will then probably have to implement our fbops->fb_mmap() callback to handle local memory. Reported-by: Neil MacLeod <freedesktop@nmacleod.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112256 Fixes: 5f889b9a61dd ("drm/i915: Disregard drm_mode_config.fb_base") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Tested-by: Neil MacLeod <freedesktop@nmacleod.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191113180633.3947-1-chris@chris-wilson.co.uk (cherry picked from commit abc5520704ab438099fe352636b30b05c1253bea) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 9faf5fa4d3dad3b0c0fa6e67689c144981a11c27) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-11-20net: sfp: soft status and control supportRussell King
Add support for the soft status and control register, which allows TX_FAULT and RX_LOS to be monitored and TX_DISABLE to be set. We make use of this when the board does not support GPIOs for these signals. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net: sfp: add some quirks for GPON modulesRussell King
Marc Micalizzi reports that Huawei MA5671A and Alcatel/Lucent G-010S-P modules are capable of 2500base-X, but incorrectly report their capabilities in the EEPROM. It seems rather common that GPON modules mis-report. Let's fix these modules by adding some quirks. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net: sfp: add support for module quirksRussell King
Add support for applying module quirks to the list of supported ethtool link modes. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-11-20 The following pull-request contains BPF updates for your *net-next* tree. We've added 81 non-merge commits during the last 17 day(s) which contain a total of 120 files changed, 4958 insertions(+), 1081 deletions(-). There are 3 trivial conflicts, resolve it by always taking the chunk from 196e8ca74886c433: <<<<<<< HEAD ======= void *bpf_map_area_mmapable_alloc(u64 size, int numa_node); >>>>>>> 196e8ca74886c433dcfc64a809707074b936aaf5 <<<<<<< HEAD void *bpf_map_area_alloc(u64 size, int numa_node) ======= static void *__bpf_map_area_alloc(u64 size, int numa_node, bool mmapable) >>>>>>> 196e8ca74886c433dcfc64a809707074b936aaf5 <<<<<<< HEAD if (size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) { ======= /* kmalloc()'ed memory can't be mmap()'ed */ if (!mmapable && size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) { >>>>>>> 196e8ca74886c433dcfc64a809707074b936aaf5 The main changes are: 1) Addition of BPF trampoline which works as a bridge between kernel functions, BPF programs and other BPF programs along with two new use cases: i) fentry/fexit BPF programs for tracing with practically zero overhead to call into BPF (as opposed to k[ret]probes) and ii) attachment of the former to networking related programs to see input/output of networking programs (covering xdpdump use case), from Alexei Starovoitov. 2) BPF array map mmap support and use in libbpf for global data maps; also a big batch of libbpf improvements, among others, support for reading bitfields in a relocatable manner (via libbpf's CO-RE helper API), from Andrii Nakryiko. 3) Extend s390x JIT with usage of relative long jumps and loads in order to lift the current 64/512k size limits on JITed BPF programs there, from Ilya Leoshkevich. 4) Add BPF audit support and emit messages upon successful prog load and unload in order to have a timeline of events, from Daniel Borkmann and Jiri Olsa. 5) Extension to libbpf and xdpsock sample programs to demo the shared umem mode (XDP_SHARED_UMEM) as well as RX-only and TX-only sockets, from Magnus Karlsson. 6) Several follow-up bug fixes for libbpf's auto-pinning code and a new API call named bpf_get_link_xdp_info() for retrieving the full set of prog IDs attached to XDP, from Toke Høiland-Jørgensen. 7) Add BTF support for array of int, array of struct and multidimensional arrays and enable it for skb->cb[] access in kfree_skb test, from Martin KaFai Lau. 8) Fix AF_XDP by using the correct number of channels from ethtool, from Luigi Rizzo. 9) Two fixes for BPF selftest to get rid of a hang in test_tc_tunnel and to avoid xdping to be run as standalone, from Jiri Benc. 10) Various BPF selftest fixes when run with latest LLVM trunk, from Yonghong Song. 11) Fix a memory leak in BPF fentry test run data, from Colin Ian King. 12) Various smaller misc cleanups and improvements mostly all over BPF selftests and samples, from Daniel T. Lee, Andre Guedes, Anders Roxell, Mao Wenan, Yue Haibing. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20Revert "drm/amd/display: enable S/G for RAVEN chip"Alex Deucher
This reverts commit 1c4259159132ae4ceaf7c6db37a6cf76417f73d9. S/G display is not stable with the IOMMU enabled on some platforms. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205523 Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-11-20drm/amdgpu: disable gfxoff on original ravenAlex Deucher
There are still combinations of sbios and firmware that are not stable. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=204689 Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-11-20drm/amdgpu: disable gfxoff when using register read interfaceAlex Deucher
When gfxoff is enabled, accessing gfx registers via MMIO can lead to a hang. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205497 Acked-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-11-20drm/amd/powerplay: correct fine grained dpm force level settingEvan Quan
For fine grained dpm, there is only two levels supported. However to reflect correctly the current clock frequency, there is an intermediate level faked. Thus on forcing level setting, we need to treat level 2 correctly as level 1. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-20drm/amd/powerplay: issue no PPSMC_MSG_GetCurrPkgPwr on unsupported ASICsEvan Quan
Otherwise, the error message prompted will confuse user. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-11-20drm/amdgpu: remove experimental flag for Navi14Alex Deucher
5.4 and newer works fine with navi14. Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-20Merge tag 'mlx5-fixes-2019-11-20' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-11-20 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v4.9: ('net/mlx5e: Fix set vf link state error flow') For -stable v4.14 ('net/mlxfw: Verify FSM error code translation doesn't exceed array size') For -stable v4.19 ('net/mlx5: Fix auto group size calculation') For -stable v5.3 ('net/mlx5e: Fix error flow cleanup in mlx5e_tc_tun_create_header_ipv4/6') ('net/mlx5e: Do not use non-EXT link modes in EXT mode') ('net/mlx5: Update the list of the PCI supported devices') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20r8169: add check for PHY_MDIO_CHG to rtl_nic_fw_data_okHeiner Kallweit
Only values 0 and 1 are currently defined as parameters for PHY_MDIO_CHG. Instead of silently ignoring unknown values and misinterpreting the firmware code let's explicitly check. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20r8169: use macro FIELD_SIZEOF in definition of FW_OPCODE_SIZEHeiner Kallweit
Using macro FIELD_SIZEOF makes this define easier understandable. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20r8169: change mdelay to msleep in rtl_fw_write_firmwareHeiner Kallweit
We're not in atomic context here, therefore switch to msleep. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20r8152: Re-order napi_disable in rtl8152_closePrashant Malani
Both rtl_work_func_t() and rtl8152_close() call napi_disable(). Since the two calls aren't protected by a lock, if the close function starts executing before the work function, we can get into a situation where the napi_disable() function is called twice in succession (first by rtl8152_close(), then by set_carrier()). In such a situation, the second call would loop indefinitely, since rtl8152_close() doesn't call napi_enable() to clear the NAPI_STATE_SCHED bit. The rtl8152_close() function in turn issues a cancel_delayed_work_sync(), and so it would wait indefinitely for the rtl_work_func_t() to complete. Since rtl8152_close() is called by a process holding rtnl_lock() which is requested by other processes, this eventually leads to a system deadlock and crash. Re-order the napi_disable() call to occur after the work function disabling and urb cancellation calls are issued. Change-Id: I6ef0b703fc214998a037a68f722f784e1d07815e Reported-by: http://crbug.com/1017928 Signed-off-by: Prashant Malani <pmalani@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net: qca_spi: Move reset_count to struct qcaspiStefan Wahren
The reset counter is specific for every QCA700x chip. So move this into the private driver struct. Otherwise we get unpredictable reset behavior in setups with multiple QCA700x chips. Fixes: 291ab06ecf67 (net: qualcomm: new Ethernet over SPI driver for QCA7000) Signed-off-by: Stefan Wahren <stefan.wahren@in-tech.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net: qca_spi: fix receive buffer size checkMichael Heimpold
When receiving many or larger packets, e.g. when doing a file download, it was observed that the read buffer size register reports up to 4 bytes more than the current define allows in the check. If this is the case, then no data transfer is initiated to receive the packets (and thus to empty the buffer) which results in a stall of the interface. These 4 bytes are a hardware generated frame length which is prepended to the actual frame, thus we have to respect it during our check. Fixes: 026b907d58c4 ("net: qca_spi: Add available buffer space verification") Signed-off-by: Michael Heimpold <michael.heimpold@in-tech.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20vsock/vmci: make vmci_vsock_cb_host_called staticMao Wenan
When using make C=2 drivers/misc/vmw_vmci/vmci_driver.o to compile, below warning can be seen: drivers/misc/vmw_vmci/vmci_driver.c:33:6: warning: symbol 'vmci_vsock_cb_host_called' was not declared. Should it be static? This patch make symbol vmci_vsock_cb_host_called static. Fixes: b1bba80a4376 ("vsock/vmci: register vmci_transport only when VMCI guest/host are active") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Mao Wenan <maowenan@huawei.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net/ibmvnic: Ignore H_FUNCTION return from H_EOI to tolerate XIVE modeJuliet Kim
Reversion of commit 11d49ce9f7946dfed4dcf5dbde865c78058b50ab (“net/ibmvnic: Fix EOI when running in XIVE mode.”) leaves us calling H_EOI even in XIVE mode. That will fail with H_FUNCTION because H_EOI is not supported in that mode. That failure is harmless. Ignore it so we can use common code for both XICS and XIVE. Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20Revert "net/ibmvnic: Fix EOI when running in XIVE mode"Juliet Kim
This reverts commit 11d49ce9f7946dfed4dcf5dbde865c78058b50ab (“net/ibmvnic: Fix EOI when running in XIVE mode.”) since that has the unintended effect of changing the interrupt priority and emits warning when running in legacy XICS mode. Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net: mvneta: get rid of huge dma sync in mvneta_rx_refillLorenzo Bianconi
Get rid of costly dma_sync_single_for_device in mvneta_rx_refill since now the driver can let page_pool API to manage needed DMA sync with a proper size. - XDP_DROP DMA sync managed by mvneta driver: ~420Kpps - XDP_DROP DMA sync managed by page_pool API: ~585Kpps Tested-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net: mvneta: rely on page_pool_recycle_direct in mvneta_run_xdpLorenzo Bianconi
Rely on page_pool_recycle_direct and not on xdp_return_buff in mvneta_run_xdp. This is a preliminary patch to limit the dma sync len to the one strictly necessary Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net/mlxfw: Verify FSM error code translation doesn't exceed array sizeEran Ben Elisha
Array mlxfw_fsm_state_err_str contains value to string translation, when values are provided by mlxfw_dev. If value is larger than MLXFW_FSM_STATE_ERR_MAX, return "unknown error" as expected instead of reading an address than exceed array size. Fixes: 410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-20net/mlx5: Update the list of the PCI supported devicesShani Shapp
Add the upcoming ConnectX-6 LX device ID. Fixes: 85327a9c4150 ("net/mlx5: Update the list of the PCI supported devices") Signed-off-by: Shani Shapp <shanish@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-20net/mlx5: Fix auto group size calculationMaor Gottlieb
Once all the large flow groups (defined by the user when the flow table is created - max_num_groups) were created, then all the following new flow groups will have only one flow table entry, even though the flow table has place to larger groups. Fix the condition to prefer large flow group. Fixes: f0d22d187473 ("net/mlx5_core: Introduce flow steering autogrouped flow table") Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-20net/mlx5e: Add missing capability bit check for IP-in-IPMarina Varshaver
Device that doesn't support IP-in-IP offloads has to filter csum and gso offload support, otherwise kernel will conclude that device is capable of offloading csum and gso for IP-in-IP tunnels and that might result in IP-in-IP tunnel not functioning. Fixes: 25948b87dda2 ("net/mlx5e: Support TSO and TX checksum offloads for IP-in-IP") Signed-off-by: Marina Varshaver <marinav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 21:35:10 +0000