summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-06-09Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Been sitting on these for a couple of weeks waiting on some larger batches to come in but it's been pretty quiet. Just your garden variety fixes here: - A few maintainers updates (ep93xx, Exynos, TI, Marvell) - Some PM fixes for Atmel/at91 and Marvell - A few DT fixes for Marvell, Versatile, TI Keystone, bcm283x - A reset driver patch to set module license for symbol access" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: EP93XX: Update maintainership MAINTAINERS: remove kernel@stlinux.com obsolete mailing list ARM: dts: versatile: use #include "..." to include local DT MAINTAINERS: add device-tree files to TI DaVinci entry ARM: at91: select CONFIG_ARM_CPU_SUSPEND ARM: dts: keystone-k2l: fix broken Ethernet due to disabled OSR arm64: defconfig: enable some core options for 64bit Rockchip socs arm64: marvell: dts: fix interrupts in 7k/8k crypto nodes reset: hi6220: Set module license so that it can be loaded MAINTAINERS: add irqchip related drivers to Marvell EBU maintainers MAINTAINERS: sort F entries for Marvell EBU maintainers ARM: davinci: PM: Do not free useful resources in normal path in 'davinci_pm_init' ARM: davinci: PM: Free resources in error handling path in 'davinci_pm_init' ARM: dts: bcm283x: Reserve first page for firmware memory: atmel-ebi: mark PM ops as __maybe_unused MAINTAINERS: Remove Javier Martinez Canillas as reviewer for Exynos
2017-06-09device-dax: fix 'dax' device filesystem inode destruction crashDan Williams
The inode destruction path for the 'dax' device filesystem incorrectly assumes that the inode was initialized through 'alloc_dax()'. However, if someone attempts to directly mount the dax filesystem with 'mount -t dax dax mnt' that will bypass 'alloc_dax()' and the following failure signatures may occur as a result: kill_dax() must be called before final iput() WARNING: CPU: 2 PID: 1188 at drivers/dax/super.c:243 dax_destroy_inode+0x48/0x50 RIP: 0010:dax_destroy_inode+0x48/0x50 Call Trace: destroy_inode+0x3b/0x60 evict+0x139/0x1c0 iput+0x1f9/0x2d0 dentry_unlink_inode+0xc3/0x160 __dentry_kill+0xcf/0x180 ? dput+0x37/0x3b0 dput+0x3a3/0x3b0 do_one_tree+0x36/0x40 shrink_dcache_for_umount+0x2d/0x90 generic_shutdown_super+0x1f/0x120 kill_anon_super+0x12/0x20 deactivate_locked_super+0x43/0x70 deactivate_super+0x4e/0x60 general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC RIP: 0010:kfree+0x6d/0x290 Call Trace: <IRQ> dax_i_callback+0x22/0x60 ? dax_destroy_inode+0x50/0x50 rcu_process_callbacks+0x298/0x740 ida_remove called for id=0 which is not allocated. WARNING: CPU: 0 PID: 0 at lib/idr.c:383 ida_remove+0x110/0x120 [..] Call Trace: <IRQ> ida_simple_remove+0x2b/0x50 ? dax_destroy_inode+0x50/0x50 dax_i_callback+0x3c/0x60 rcu_process_callbacks+0x298/0x740 Add missing initialization of the 'struct dax_device' and inode so that the destruction path does not kfree() or ida_simple_remove() uninitialized data. Fixes: 7b6be8444e0f ("dax: refactor dax-fs into a generic provider of 'struct dax_device' instances") Reported-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-09efi: Fix boot panic because of invalid BGRT image addressDave Young
Maniaxx reported a kernel boot crash in the EFI code, which I emulated by using same invalid phys addr in code: BUG: unable to handle kernel paging request at ffffffffff280001 IP: efi_bgrt_init+0xfb/0x153 ... Call Trace: ? bgrt_init+0xbc/0xbc acpi_parse_bgrt+0xe/0x12 acpi_table_parse+0x89/0xb8 acpi_boot_init+0x445/0x4e2 ? acpi_parse_x2apic+0x79/0x79 ? dmi_ignore_irq0_timer_override+0x33/0x33 setup_arch+0xb63/0xc82 ? early_idt_handler_array+0x120/0x120 start_kernel+0xb7/0x443 ? early_idt_handler_array+0x120/0x120 x86_64_start_reservations+0x29/0x2b x86_64_start_kernel+0x154/0x177 secondary_startup_64+0x9f/0x9f There is also a similar bug filed in bugzilla.kernel.org: https://bugzilla.kernel.org/show_bug.cgi?id=195633 The crash is caused by this commit: 7b0a911478c7 efi/x86: Move the EFI BGRT init code to early init code The root cause is the firmware on those machines provides invalid BGRT image addresses. In a kernel before above commit BGRT initializes late and uses ioremap() to map the image address. Ioremap validates the address, if it is not a valid physical address ioremap() just fails and returns. However in current kernel EFI BGRT initializes early and uses early_memremap() which does not validate the image address, and kernel panic happens. According to ACPI spec the BGRT image address should fall into EFI_BOOT_SERVICES_DATA, see the section 5.2.22.4 of below document: http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf Fix this issue by validating the image address in efi_bgrt_init(). If the image address does not fall into any EFI_BOOT_SERVICES_DATA areas we just bail out with a warning message. Reported-by: Maniaxx <tripleshiftone@gmail.com> Signed-off-by: Dave Young <dyoung@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 7b0a911478c7 ("efi/x86: Move the EFI BGRT init code to early init code") Link: http://lkml.kernel.org/r/20170609084558.26766-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-09cxl: Avoid double free_irq() for psl,slice interruptsVaibhav Jain
During an eeh call to cxl_remove can result in double free_irq of psl,slice interrupts. This can happen if perst_reloads_same_image == 1 and call to cxl_configure_adapter() fails during slot_reset callback. In such a case we see a kernel oops with following back-trace: Oops: Kernel access of bad area, sig: 11 [#1] Call Trace: free_irq+0x88/0xd0 (unreliable) cxl_unmap_irq+0x20/0x40 [cxl] cxl_native_release_psl_irq+0x78/0xd8 [cxl] pci_deconfigure_afu+0xac/0x110 [cxl] cxl_remove+0x104/0x210 [cxl] pci_device_remove+0x6c/0x110 device_release_driver_internal+0x204/0x2e0 pci_stop_bus_device+0xa0/0xd0 pci_stop_and_remove_bus_device+0x28/0x40 pci_hp_remove_devices+0xb0/0x150 pci_hp_remove_devices+0x68/0x150 eeh_handle_normal_event+0x140/0x580 eeh_handle_event+0x174/0x360 eeh_event_handler+0x1e8/0x1f0 This patch fixes the issue of double free_irq by checking that variables that hold the virqs (err_hwirq, serr_hwirq, psl_virq) are not '0' before un-mapping and resetting these variables to '0' when they are un-mapped. Cc: stable@vger.kernel.org Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09gpio: mvebu: fix gpio bank registration when pwm is usedRichard Genoud
If more than one gpio bank has the "pwm" property, only one will be registered successfully, all the others will fail with: mvebu-gpio: probe of f1018140.gpio failed with error -17 That's because in alloc_pwms(), the chip->base (aka "int pwm"), was not set (thus, ==0) ; and 0 is a meaningful start value in alloc_pwm(). What was intended is mvpwm->chip->base = -1. Like that, the numbering will be done auto-magically Moreover, as the region might be already occupied by another pwm, we shouldn't force: mvpwm->chip->base = 0 nor mvpwm->chip->base = id * MVEBU_MAX_GPIO_PER_BANK; Tested on clearfog-pro (Marvell 88F6828) Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09gpio: mvebu: fix blink counter register selectionRichard Genoud
The blink counter A was always selected because 0 was forced in the blink select counter register. The variable 'set' was obviously there to be used as the register value, selecting the B counter when id==1 and A counter when id==0. Tested on clearfog-pro (Marvell 88F6828) Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09Merge branch 'vmwgfx-fixes-4.12' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-fixes A bunch of fixes for vmwgfx 4.12 regressions and older stuff. In the latter case either trivial, cc'd stable or requiring backports for stable. * 'vmwgfx-fixes-4.12' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Bump driver minor and date drm/vmwgfx: Remove unused legacy cursor functions drm/vmwgfx: fix spelling mistake "exeeds" -> "exceeds" drm/vmwgfx: Fix large topology crash drm/vmwgfx: Make sure to update STDU when FB is updated drm/vmwgfx: Make sure backup_handle is always valid drm/vmwgfx: Handle vmalloc() failure in vmw_local_fifo_reserve() drm/vmwgfx: Don't create proxy surface for cursor drm/vmwgfx: limit the number of mip levels in vmw_gb_surface_define_ioctl()
2017-06-09Merge tag 'drm-intel-fixes-2017-06-08' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-intel into drm-fixes drm/i915 fixes for v4.12-rc5 * tag 'drm-intel-fixes-2017-06-08' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: fix warning for unused variable drm/i915: Fix 90/270 rotated coordinates for FBC drm/i915: Restore has_fbc=1 for ILK-M drm/i915: Workaround VLV/CHV DSI scanline counter hardware fail drm/i915: Fix logical inversion for gen4 quirking drm/i915: Guard against i915_ggtt_disable_guc() being invoked unconditionally drm/i915: Always recompute watermarks when distrust_bios_wm is set, v2. drm/i915: Prevent the system suspend complete optimization drm/i915/psr: disable psr2 for resolution greater than 32X20 drm/i915: Hold a wakeref for probing the ring registers drm/i915: Short-circuit i915_gem_wait_for_idle() if already idle drm/i915: Disable decoupled MMIO drm/i915/guc: Remove stale comment for q_fail drm/i915: Serialize GTT/Aperture accesses on BXT
2017-06-09Merge tag 'drm-misc-fixes-2017-06-07' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-fixes Driver Changes: - kirin: Use correct dt port for the bridge (John) - meson: Fix regression caused by adding HDMI support to allow board configurations without HDMI (Neil) Cc: John Stultz <john.stultz@linaro.org> Cc: Neil Armstrong <narmstrong@baylibre.com> * tag 'drm-misc-fixes-2017-06-07' of git://anongit.freedesktop.org/git/drm-misc: drm/meson: Fix driver bind when only CVBS is available drm: kirin: Fix drm_of_find_panel_or_bridge conversion
2017-06-09Merge branch 'mediatek-drm-fixes-4.12-rc1' of ↵Dave Airlie
https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes mediatek fixes * 'mediatek-drm-fixes-4.12-rc1' of https://github.com/ckhu-mediatek/linux.git-tags: drm/mediatek: fix mtk_hdmi_setup_vendor_specific_infoframe mistake drm/mediatek: fix a timeout loop
2017-06-09Merge tag 'imx-drm-fixes-2017-06-08' of ↵Dave Airlie
git://git.pengutronix.de/git/pza/linux into drm-fixes imx-drm: PRE clock gating, panelless LDB, and VDIC CSI selection fixes - Keep the external clock input to the PRE ungated and only use the internal soft reset to keep the module in low power state, to avoid sporadic startup failures. - Ignore -ENODEV return values from drm_of_find_panel_or_bridge in the LDB driver to fix probing for devices that still do not specify a panel in the device tree. - Fix the CSI input selection to the VDIC. According to experiments, the real behaviour differs a bit from the documentation. * tag 'imx-drm-fixes-2017-06-08' of git://git.pengutronix.de/git/pza/linux: gpu: ipu-v3: Fix CSI selection for VDIC drm/imx: imx-ldb: Accept drm_of_find_panel_or_bridge failure gpu: ipu-v3: pre: only use internal clock gating
2017-06-08Merge tag 'pm-4.12-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These revert one problematic commit related to system sleep and fix one recent intel_pstate regression. Specifics: - Revert a recent commit that attempted to avoid spurious wakeups from suspend-to-idle via ACPI SCI, but introduced regressions on some systems (Rafael Wysocki). We will get back to the problem it tried to address in the next cycle. - Fix a possible division by 0 during intel_pstate initialization due to a missing check (Rafael Wysocki)" * tag 'pm-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle" cpufreq: intel_pstate: Avoid division by 0 in min_perf_pct_min()
2017-06-09Merge branches 'intel_pstate' and 'pm-sleep'Rafael J. Wysocki
* intel_pstate: cpufreq: intel_pstate: Avoid division by 0 in min_perf_pct_min() * pm-sleep: Revert "ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle"
2017-06-08Merge branch 'nvme-4.12' of git://git.infradead.org/nvme into for-linusJens Axboe
Christoph writes: "A few NVMe fixes for 4.12-rc, PCIe reset fixes and APST fixes, a RDMA reconnect fix, two FC fixes and a general controller removal fix."
2017-06-08drm/i915: fix warning for unused variableJani Nikula
drivers/gpu/drm/i915/intel_engine_cs.c: In function ‘intel_engine_is_idle’: drivers/gpu/drm/i915/intel_engine_cs.c:1103:27: error: unused variable ‘dev_priv’ [-Werror=unused-variable] struct drm_i915_private *dev_priv = engine->i915; ^~~~~~~~ Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-08Fix loop device flush before configure v3James Wang
While installing SLES-12 (based on v4.4), I found that the installer will stall for 60+ seconds during LVM disk scan. The root cause was determined to be the removal of a bound device check in loop_flush() by commit b5dd2f6047ca ("block: loop: improve performance via blk-mq"). Restoring this check, examining ->lo_state as set by loop_set_fd() eliminates the bad behavior. Test method: modprobe loop max_loop=64 dd if=/dev/zero of=disk bs=512 count=200K for((i=0;i<4;i++))do losetup -f disk; done mkfs.ext4 -F /dev/loop0 for((i=0;i<4;i++))do mkdir t$i; mount /dev/loop$i t$i;done for f in `ls /dev/loop[0-9]*|sort`; do \ echo $f; dd if=$f of=/dev/null bs=512 count=1; \ done Test output: stock patched /dev/loop0 18.1217e-05 8.3842e-05 /dev/loop1 6.1114e-05 0.000147979 /dev/loop10 0.414701 0.000116564 /dev/loop11 0.7474 6.7942e-05 /dev/loop12 0.747986 8.9082e-05 /dev/loop13 0.746532 7.4799e-05 /dev/loop14 0.480041 9.3926e-05 /dev/loop15 1.26453 7.2522e-05 Note that from loop10 onward, the device is not mounted, yet the stock kernel consumes several orders of magnitude more wall time than it does for a mounted device. (Thanks for Mike Galbraith <efault@gmx.de>, give a changelog review.) Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: James Wang <jnwang@suse.com> Fixes: b5dd2f6047ca ("block: loop: improve performance via blk-mq") Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-08cxl: Fix error path on bad ioctlFrederic Barrat
Fix error path if we can't copy user structure on CXL_IOCTL_START_WORK ioctl. We shouldn't unlock the context status mutex as it was not locked (yet). Fixes: 0712dc7e73e5 ("cxl: Fix issues when unmapping contexts") Cc: stable@vger.kernel.org # v3.19+ Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-07random: invalidate batched entropy after crng initJason A. Donenfeld
It's possible that get_random_{u32,u64} is used before the crng has initialized, in which case, its output might not be cryptographically secure. For this problem, directly, this patch set is introducing the *_wait variety of functions, but even with that, there's a subtle issue: what happens to our batched entropy that was generated before initialization. Prior to this commit, it'd stick around, supplying bad numbers. After this commit, we force the entropy to be re-extracted after each phase of the crng has initialized. In order to avoid a race condition with the position counter, we introduce a simple rwlock for this invalidation. Since it's only during this awkward transition period, after things are all set up, we stop using it, so that it doesn't have an impact on performance. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org # v4.11+
2017-06-07random: use lockless method of accessing and updating f->reg_idxTheodore Ts'o
Linus pointed out that there is a much more efficient way of avoiding the problem that we were trying to address in commit 9dfa7bba35ac0: "fix race in drivers/char/random.c:get_reg()". Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-06-07Input: elantech - add Fujitsu Lifebook E546/E557 to force crc_enabledUlrik De Bie
The Lifebook E546 and E557 touchpad were also not functioning and worked after running: echo "1" > /sys/devices/platform/i8042/serio2/crc_enabled Add them to the list of machines that need this workaround. Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Reviewed-by: Arjan Opmeer <arjan@opmeer.net> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-06-07drm/meson: Fix driver bind when only CVBS is availableNeil Armstrong
While introducing HDMI support, component matching on connectors node were bypassed since no driver would actually bind on the DT node. But when only a CVBS connector is present, only a single node is found in the graph, but ignored and a NULL match table is given to the component code. This code permits bypassing the components framework by binding directly the DRM driver when no components needs to be loaded. Fixes: a41e82e6c457 ("drm/meson: Add support for components") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1496067352-8733-1-git-send-email-narmstrong@baylibre.com
2017-06-07drm/i915: Fix 90/270 rotated coordinates for FBCVille Syrjälä
The clipped src coordinates have already been rotated by 270 degrees for when the plane rotation is 90/270 degrees, hence the FBC code should no longer swap the width and height. Cc: stable@vger.kernel.org Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Fixes: b63a16f6cd89 ("drm/i915: Compute display surface offset in the plane check hook for SKL+") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170331180056.14086-4-ville.syrjala@linux.intel.com Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (cherry picked from commit 73714c05df97d7527e7eaaa771472ef2ede46fa3) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Restore has_fbc=1 for ILK-MVille Syrjälä
Restore the lost has_fbc flag for mobile ILK. Cc: Carlos Santa <carlos.santa@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Fixes: a13233804686 ("drm/i915: Introduce GEN5_FEATURES for device info") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170606133229.12439-1-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit c2d1a0ced2603c4a17fa9c53c37e415905cf5a6d) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Workaround VLV/CHV DSI scanline counter hardware failVille Syrjälä
The scanline counter is bonkers on VLV/CHV DSI. The scanline counter increment is not lined up with the start of vblank like it is on every other platform and output type. This causes problems for both the vblank timestamping and atomic update vblank evasion. On my FFRD8 machine at least, the scanline counter increment happens about 1/3 of a scanline ahead of the start of vblank (which is where all register latching happens still). That means we can't trust the scanline counter to tell us whether we're in vblank or not while we're on that particular line. In order to keep vblank timestamping in working condition when called from the vblank irq, we'll leave scanline_offset at one, which means that the entire line containing the start of vblank is considered to be inside the vblank. For the vblank evasion we'll need to consider that entire line to be bad, since we can't tell whether the registers already got latched or not. And we can't actually use the start of vblank interrupt to get us past that line as the interrupt would fire too soon, and then we'd up waiting for the next start of vblank instead. One way around that would using the frame start interrupt instead since that wouldn't fire until the next scanline, but that would require some bigger changes in the interrupt code. So for simplicity we'll just poll until we get past the bad line. v2: Adjust the comments a bit Cc: stable@vger.kernel.org Cc: Jonas Aaberg <cja@gmx.net> Tested-by: Jonas Aaberg <cja@gmx.net> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99086 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161215174734.28779-1-ville.syrjala@linux.intel.com Tested-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> (cherry picked from commit ec1b4ee2834e66884e5b0d3d465f347ff212e372) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Fix logical inversion for gen4 quirkingChris Wilson
The assertion that we want to make before disabling the pin of the pages for the unknown swizzling quirk is that the quirk is indeed active, and that the quirk is disabled before we do apply it to the pages. Fixes: 2c3a3f44dc13 ("drm/i915: Fix pages pin counting around swizzle quirk") Fixes: 957870f93412 ("drm/i915: Split out i915_gem_object_set_tiling()") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170521124014.27678-1-chris@chris-wilson.co.uk Reviewed-bhy: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 20bb377106af69d16269b1837e9a945b9f508a2e) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Guard against i915_ggtt_disable_guc() being invoked unconditionallyChris Wilson
Commit 7c3f86b6dc51 ("drm/i915: Invalidate the guc ggtt TLB upon insertion") added the restoration of the invalidation routine after the GuC was disabled, but missed that the GuC was unconditionally disabled when not used. This then overwrites the invalidate routine for the older chipsets, causing havoc and breaking resume as the most obvious victim. We place the guard inside i915_ggtt_disable_guc() to be backport friendly (the bug was introduced into v4.11) but it would be preferred to be in more control over when this was guard (i.e. do not try and teardown the data structures before we have enabled them). That should be true with the reorganisation of the guc loaders. Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 7c3f86b6dc51 ("drm/i915: Invalidate the guc ggtt TLB upon insertion") Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: <stable@vger.kernel.org> # v4.11+ Link: http://patchwork.freedesktop.org/patch/msgid/20170531190514.3691-1-chris@chris-wilson.co.uk Reviewed-by: Michel Thierry <michel.thierry@intel.com> (cherry picked from commit cb60606d835ca8b2f744835116bcabe64ce88849) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Always recompute watermarks when distrust_bios_wm is set, v2.Maarten Lankhorst
On some systems there can be a race condition in which no crtc state is added to the first atomic commit. This results in all crtc's having a null DDB allocation, causing a FIFO underrun on any update until the first modeset. Changes since v1: - Do not take the connection_mutex, this is already done below. Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Inspired-by: Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 98d39494d375 ("drm/i915/gen9: Compute DDB allocation at atomic check time (v4)") Cc: <stable@vger.kernel.org> # v4.8+ Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170531154236.27180-1-maarten.lankhorst@linux.intel.com Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> (cherry picked from commit 367d73d2806085bb507ab44c1f532640917fd5ca) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Prevent the system suspend complete optimizationImre Deak
Since commit bac2a909a096c9110525c18cbb8ce73c660d5f71 Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Date: Wed Jan 21 02:17:42 2015 +0100 PCI / PM: Avoid resuming PCI devices during system suspend PCI devices will default to allowing the system suspend complete optimization where devices are not woken up during system suspend if they were already runtime suspended. This however breaks the i915/HDA drivers for two reasons: - The i915 driver has system suspend specific steps that it needs to run, that bring the device to a different state than its runtime suspended state. - The HDA driver's suspend handler requires power that it will request from the i915 driver's power domain handler. This in turn requires the i915 driver to runtime resume itself, but this won't be possible if the suspend complete optimization is in effect: in this case the i915 runtime PM is disabled and trying to get an RPM reference returns -EACCESS. Solve this by requiring the PCI/PM core to resume the device during system suspend which in effect disables the suspend complete optimization. Regardless of the above commit the optimization stayed disabled for DRM devices until commit d14d2a8453d650bea32a1c5271af1458cd283a0f Author: Lukas Wunner <lukas@wunner.de> Date: Wed Jun 8 12:49:29 2016 +0200 drm: Remove dev_pm_ops from drm_class so this patch is in practice a fix for this commit. Another reason for the bug staying hidden for so long is that the optimization for a device is disabled if it's disabled for any of its children devices. i915 may have a backlight device as its child which doesn't support runtime PM and so doesn't allow the optimization either. So if this backlight device got registered the bug stayed hidden. Credits to Marta, Tomi and David who enabled pstore logging, that caught one instance of this issue across a suspend/ resume-to-ram and Ville who rememberd that the optimization was enabled for some devices at one point. The first WARN triggered by the problem: [ 6250.746445] WARNING: CPU: 2 PID: 17384 at drivers/gpu/drm/i915/intel_runtime_pm.c:2846 intel_runtime_pm_get+0x6b/0xd0 [i915] [ 6250.746448] pm_runtime_get_sync() failed: -13 [ 6250.746451] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul snd_hda_codec_realtek snd_hda_codec_generic ghash_clmulni_intel e1000e snd_hda_codec snd_hwdep snd_hda_core ptp mei_me pps_core snd_pcm lpc_ich mei prime_ numbers i2c_hid i2c_designware_platform i2c_designware_core [last unloaded: i915] [ 6250.746512] CPU: 2 PID: 17384 Comm: kworker/u8:0 Tainted: G U W 4.11.0-rc5-CI-CI_DRM_334+ #1 [ 6250.746515] Hardware name: /NUC5i5RYB, BIOS RYBDWi35.86A.0362.2017.0118.0940 01/18/2017 [ 6250.746521] Workqueue: events_unbound async_run_entry_fn [ 6250.746525] Call Trace: [ 6250.746530] dump_stack+0x67/0x92 [ 6250.746536] __warn+0xc6/0xe0 [ 6250.746542] ? pci_restore_standard_config+0x40/0x40 [ 6250.746546] warn_slowpath_fmt+0x46/0x50 [ 6250.746553] ? __pm_runtime_resume+0x56/0x80 [ 6250.746584] intel_runtime_pm_get+0x6b/0xd0 [i915] [ 6250.746610] intel_display_power_get+0x1b/0x40 [i915] [ 6250.746646] i915_audio_component_get_power+0x15/0x20 [i915] [ 6250.746654] snd_hdac_display_power+0xc8/0x110 [snd_hda_core] [ 6250.746661] azx_runtime_resume+0x218/0x280 [snd_hda_intel] [ 6250.746667] pci_pm_runtime_resume+0x76/0xa0 [ 6250.746672] __rpm_callback+0xb4/0x1f0 [ 6250.746677] ? pci_restore_standard_config+0x40/0x40 [ 6250.746682] rpm_callback+0x1f/0x80 [ 6250.746686] ? pci_restore_standard_config+0x40/0x40 [ 6250.746690] rpm_resume+0x4ba/0x740 [ 6250.746698] __pm_runtime_resume+0x49/0x80 [ 6250.746703] pci_pm_suspend+0x57/0x140 [ 6250.746709] dpm_run_callback+0x6f/0x330 [ 6250.746713] ? pci_pm_freeze+0xe0/0xe0 [ 6250.746718] __device_suspend+0xf9/0x370 [ 6250.746724] ? dpm_watchdog_set+0x60/0x60 [ 6250.746730] async_suspend+0x1a/0x90 [ 6250.746735] async_run_entry_fn+0x34/0x160 [ 6250.746741] process_one_work+0x1f2/0x6d0 [ 6250.746749] worker_thread+0x49/0x4a0 [ 6250.746755] kthread+0x107/0x140 [ 6250.746759] ? process_one_work+0x6d0/0x6d0 [ 6250.746763] ? kthread_create_on_node+0x40/0x40 [ 6250.746768] ret_from_fork+0x2e/0x40 [ 6250.746778] ---[ end trace 102a62fd2160f5e6 ]--- v2: - Use the new pci_dev->needs_resume flag, to avoid any overhead during the ->pm_prepare hook. (Rafael) v3: - Update commit message to reference the actual regressing commit. (Lukas) v4: - Rebase on v4 of patch 1/2. Fixes: d14d2a8453d6 ("drm: Remove dev_pm_ops from drm_class") References: https://bugs.freedesktop.org/show_bug.cgi?id=100378 References: https://bugs.freedesktop.org/show_bug.cgi?id=100770 Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Marta Lofstedt <marta.lofstedt@intel.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Tomi Sarvela <tomi.p.sarvela@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: linux-pci@vger.kernel.org Cc: <stable@vger.kernel.org> # v4.10.x: 4d071c3 - PCI/PM: Add needs_resume flag Cc: <stable@vger.kernel.org> # v4.10.x Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reported-and-tested-by: Marta Lofstedt <marta.lofstedt@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1493726649-32094-2-git-send-email-imre.deak@intel.com (cherry picked from commit adfdf85d795f4d4f487b61ee0b169d64c6e19081) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915/psr: disable psr2 for resolution greater than 32X20Nagaraju, Vathsala
psr1 is also disabled for panel resolution greater than 32X20. Added psr2 check to disable only for psr2 panels having resolution greater than 32X20. issue was introduced by commit-id : "acf45d11050abd751dcec986ab121cb2367dcbba" commit message: "PSR2 is restricted to work with panel resolutions upto 3200x2000, move the check to intel_psr_match_conditions and fully block psr." v2: (Rodrigo) Add previous commit details which introduced the issue Fixes: acf45d11050a ("drm/i915/psr: disable psr2 for resolution greater than 32X20") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Yaroslav Shabalin <yaroslav.shabalin@gmail.com> Reported-by: Yaroslav Shabalin <yaroslav.shabalin@gmail.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: vathsala nagaraju <vathsala.nagaraju@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/49935bdff896ee3140bed471012b9f9110a863a4.1495729964.git.vathsala.nagaraju@intel.com (cherry picked from commit bef8c056fba09aa4629fe5a2d3efe64068d049db) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Hold a wakeref for probing the ring registersChris Wilson
Allow intel_engine_is_idle() to be called outside of the GT wakeref by acquiring the device runtime pm for ourselves. This allows the function to act as check after we assume the engine is idle and we release the GT wakeref held whilst we have requests. At the moment, we do not call it outside of an awake context but taking the wakeref as required makes it more convenient to use for quick debugging in future. [ 2613.401647] RPM wakelock ref not held during HW access [ 2613.401684] ------------[ cut here ]------------ [ 2613.401720] WARNING: CPU: 5 PID: 7739 at drivers/gpu/drm/i915/intel_drv.h:1787 gen6_read32+0x21f/0x2b0 [i915] [ 2613.401731] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek coretemp snd_hda_codec_generic crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mii mei_me lpc_ich mei prime_numbers [last unloaded: i915] [ 2613.401823] CPU: 5 PID: 7739 Comm: drv_missed_irq Tainted: G U 4.12.0-rc2-CI-CI_DRM_421+ #1 [ 2613.401825] Hardware name: MSI MS-7924/Z97M-G43(MS-7924), BIOS V1.12 02/15/2016 [ 2613.401840] task: ffff880409e3a740 task.stack: ffffc900084dc000 [ 2613.401861] RIP: 0010:gen6_read32+0x21f/0x2b0 [i915] [ 2613.401863] RSP: 0018:ffffc900084dfce8 EFLAGS: 00010292 [ 2613.401869] RAX: 000000000000002a RBX: ffff8804016a8000 RCX: 0000000000000006 [ 2613.401871] RDX: 0000000000000006 RSI: ffffffff81cbf2d9 RDI: ffffffff81c9e3a7 [ 2613.401874] RBP: ffffc900084dfd18 R08: ffff880409e3afc8 R09: 0000000000000000 [ 2613.401877] R10: 000000008a1c483f R11: 0000000000000000 R12: 000000000000209c [ 2613.401879] R13: 0000000000000001 R14: ffff8804016a8000 R15: ffff8804016ac150 [ 2613.401882] FS: 00007f39ef3dd8c0(0000) GS:ffff88041fb40000(0000) knlGS:0000000000000000 [ 2613.401885] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2613.401887] CR2: 00000000023717c8 CR3: 00000002e7b34000 CR4: 00000000001406e0 [ 2613.401889] Call Trace: [ 2613.401912] intel_engine_is_idle+0x76/0x90 [i915] [ 2613.401931] i915_gem_wait_for_idle+0xe6/0x1e0 [i915] [ 2613.401951] fault_irq_set+0x40/0x90 [i915] [ 2613.401970] i915_ring_test_irq_set+0x42/0x50 [i915] [ 2613.401976] simple_attr_write+0xc7/0xe0 [ 2613.401981] full_proxy_write+0x4f/0x70 [ 2613.401987] __vfs_write+0x23/0x120 [ 2613.401992] ? rcu_read_lock_sched_held+0x75/0x80 [ 2613.401996] ? rcu_sync_lockdep_assert+0x2a/0x50 [ 2613.401999] ? __sb_start_write+0xfa/0x1f0 [ 2613.402004] vfs_write+0xc5/0x1d0 [ 2613.402008] ? trace_hardirqs_on_caller+0xe7/0x1c0 [ 2613.402013] SyS_write+0x44/0xb0 [ 2613.402020] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 2613.402022] RIP: 0033:0x7f39eded6670 [ 2613.402025] RSP: 002b:00007fffdcdcb1a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 2613.402030] RAX: ffffffffffffffda RBX: ffffffff81470203 RCX: 00007f39eded6670 [ 2613.402033] RDX: 0000000000000001 RSI: 000000000041bc33 RDI: 0000000000000006 [ 2613.402036] RBP: ffffc900084dff88 R08: 00007f39ef3dd8c0 R09: 0000000000000001 [ 2613.402038] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000041bc33 [ 2613.402041] R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000 [ 2613.402046] ? __this_cpu_preempt_check+0x13/0x20 [ 2613.402052] Code: 01 9b fa e0 0f ff e9 28 fe ff ff 80 3d 6a dd 0e 00 00 0f 85 29 fe ff ff 48 c7 c7 48 19 29 a0 c6 05 56 dd 0e 00 01 e8 da 9a fa e0 <0f> ff e9 0f fe ff ff b9 01 00 00 00 ba 01 00 00 00 44 89 e6 48 [ 2613.402199] ---[ end trace 31f0cfa93ab632bf ]--- Fixes: 5400367a864d ("drm/i915: Ensure the engine is idle before manually changing HWS") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170530121334.17364-2-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (cherry picked from commit a091d4ee931b16ce4fef945d39a20b851a7e17b7) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Short-circuit i915_gem_wait_for_idle() if already idleChris Wilson
If the device is asleep (no GT wakeref), we know the GPU is already idle. If we add an early return, we can avoid touching registers and checking hw state outside of the assumed GT wakelock. This prevents causing such errors whilst debugging: [ 2613.401647] RPM wakelock ref not held during HW access [ 2613.401684] ------------[ cut here ]------------ [ 2613.401720] WARNING: CPU: 5 PID: 7739 at drivers/gpu/drm/i915/intel_drv.h:1787 gen6_read32+0x21f/0x2b0 [i915] [ 2613.401731] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek coretemp snd_hda_codec_generic crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mii mei_me lpc_ich mei prime_numbers [last unloaded: i915] [ 2613.401823] CPU: 5 PID: 7739 Comm: drv_missed_irq Tainted: G U 4.12.0-rc2-CI-CI_DRM_421+ #1 [ 2613.401825] Hardware name: MSI MS-7924/Z97M-G43(MS-7924), BIOS V1.12 02/15/2016 [ 2613.401840] task: ffff880409e3a740 task.stack: ffffc900084dc000 [ 2613.401861] RIP: 0010:gen6_read32+0x21f/0x2b0 [i915] [ 2613.401863] RSP: 0018:ffffc900084dfce8 EFLAGS: 00010292 [ 2613.401869] RAX: 000000000000002a RBX: ffff8804016a8000 RCX: 0000000000000006 [ 2613.401871] RDX: 0000000000000006 RSI: ffffffff81cbf2d9 RDI: ffffffff81c9e3a7 [ 2613.401874] RBP: ffffc900084dfd18 R08: ffff880409e3afc8 R09: 0000000000000000 [ 2613.401877] R10: 000000008a1c483f R11: 0000000000000000 R12: 000000000000209c [ 2613.401879] R13: 0000000000000001 R14: ffff8804016a8000 R15: ffff8804016ac150 [ 2613.401882] FS: 00007f39ef3dd8c0(0000) GS:ffff88041fb40000(0000) knlGS:0000000000000000 [ 2613.401885] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2613.401887] CR2: 00000000023717c8 CR3: 00000002e7b34000 CR4: 00000000001406e0 [ 2613.401889] Call Trace: [ 2613.401912] intel_engine_is_idle+0x76/0x90 [i915] [ 2613.401931] i915_gem_wait_for_idle+0xe6/0x1e0 [i915] [ 2613.401951] fault_irq_set+0x40/0x90 [i915] [ 2613.401970] i915_ring_test_irq_set+0x42/0x50 [i915] [ 2613.401976] simple_attr_write+0xc7/0xe0 [ 2613.401981] full_proxy_write+0x4f/0x70 [ 2613.401987] __vfs_write+0x23/0x120 [ 2613.401992] ? rcu_read_lock_sched_held+0x75/0x80 [ 2613.401996] ? rcu_sync_lockdep_assert+0x2a/0x50 [ 2613.401999] ? __sb_start_write+0xfa/0x1f0 [ 2613.402004] vfs_write+0xc5/0x1d0 [ 2613.402008] ? trace_hardirqs_on_caller+0xe7/0x1c0 [ 2613.402013] SyS_write+0x44/0xb0 [ 2613.402020] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 2613.402022] RIP: 0033:0x7f39eded6670 [ 2613.402025] RSP: 002b:00007fffdcdcb1a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 2613.402030] RAX: ffffffffffffffda RBX: ffffffff81470203 RCX: 00007f39eded6670 [ 2613.402033] RDX: 0000000000000001 RSI: 000000000041bc33 RDI: 0000000000000006 [ 2613.402036] RBP: ffffc900084dff88 R08: 00007f39ef3dd8c0 R09: 0000000000000001 [ 2613.402038] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000041bc33 [ 2613.402041] R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000 [ 2613.402046] ? __this_cpu_preempt_check+0x13/0x20 [ 2613.402052] Code: 01 9b fa e0 0f ff e9 28 fe ff ff 80 3d 6a dd 0e 00 00 0f 85 29 fe ff ff 48 c7 c7 48 19 29 a0 c6 05 56 dd 0e 00 01 e8 da 9a fa e0 <0f> ff e9 0f fe ff ff b9 01 00 00 00 ba 01 00 00 00 44 89 e6 48 [ 2613.402199] ---[ end trace 31f0cfa93ab632bf ]--- Fixes: 25112b64b3d2 ("drm/i915: Wait for all engines to be idle as part of i915_gem_wait_for_idle()") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170530121334.17364-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 863e9fde1a7061dad09bb299c65bed5f1ccb44ff) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915: Disable decoupled MMIOKai Chen
The decoupled MMIO feature doesn't work as intended by HW team. Enabling it with forcewake will only make debugging efforts more difficult, so let's disable it. Fixes: 85ee17ebeedd ("drm/i915/bxt: Broxton decoupled MMIO") Cc: Zhe Wang <zhe1.wang@intel.com> Cc: Praveen Paneri <praveen.paneri@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by: Kai Chen <kai.chen@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170523215812.18328-2-kai.chen@intel.com (cherry picked from commit 0051c10acabb631cfd439eae73289e6e4c39b2b7) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/i915/guc: Remove stale comment for q_failMichal Wajdeczko
This member was dropped long time ago. Fixes: 774439e1 ("drm/i915/guc: re-optimise i915_guc_client layout") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170518113104.54400-1-michal.wajdeczko@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 4afc67be8e203ee8f5e95e829c0777eae7a14702) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07drm/vmwgfx: Bump driver minor and dateThomas Hellstrom
While the atomic modesetting capability is signaled also elsewhere, also reflect it by a driver minor bump. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-06-07drm/vmwgfx: Remove unused legacy cursor functionsSinclair Yeh
These function implementations and/or declarations are no longer used now that atomic is enabled. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reported-by: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-06-07drm/vmwgfx: fix spelling mistake "exeeds" -> "exceeds"Colin Ian King
Trivial fix to spelling mistake in DRM_ERROR error message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2017-06-07drm/vmwgfx: Fix large topology crashSinclair Yeh
The previous attempt at this had an issue with with num_clips > 1 because it would always end up using the coordinates of the last clip while using width and height calculated from the bounding box of all the clips. So if the last clip happens to be not at the top-left corner of the bounding box, the CPU blit operation would go out of bounds. The original intent was to coalesce all the clips into one blit, and to do that we need to also track the starting point of the content buffer. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-06-07drm/vmwgfx: Make sure to update STDU when FB is updatedSinclair Yeh
When a new FB is bound, we have to send an update command otherwise the new FB may not be shown Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-06-07drm/vmwgfx: Make sure backup_handle is always validSinclair Yeh
When vmw_gb_surface_define_ioctl() is called with an existing buffer, we end up returning an uninitialized variable in the backup_handle. The fix is to first initialize backup_handle to 0 just to be sure, and second, when a user-provided buffer is found, we will use the req->buffer_handle as the backup_handle. Cc: <stable@vger.kernel.org> Reported-by: Murray McAllister <murray.mcallister@insomniasec.com> Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com>
2017-06-07drm/vmwgfx: Handle vmalloc() failure in vmw_local_fifo_reserve()Dan Carpenter
If vmalloc() fails then we need to a bit of cleanup before returning. Cc: <stable@vger.kernel.org> Fixes: fb1d9738ca05 ("drm/vmwgfx: Add DRM driver for VMware Virtual GPU") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2017-06-07drm/vmwgfx: Don't create proxy surface for cursorSinclair Yeh
With atomic, the cursor surface is treated like a FB. Creating a proxy surface for cursor doesn't gain us much benefit. This fixes the issue on atomic enabled 2D VMs where the cursor disappears. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-06-07drm/vmwgfx: limit the number of mip levels in vmw_gb_surface_define_ioctl()Vladis Dronov
The 'req->mip_levels' parameter in vmw_gb_surface_define_ioctl() is a user-controlled 'uint32_t' value which is used as a loop count limit. This can lead to a kernel lockup and DoS. Add check for 'req->mip_levels'. References: https://bugzilla.redhat.com/show_bug.cgi?id=1437431 Cc: <stable@vger.kernel.org> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2017-06-07drm/i915: Serialize GTT/Aperture accesses on BXTJon Bloomfield
BXT has a H/W issue with IOMMU which can lead to system hangs when Aperture accesses are queued within the GAM behind GTT Accesses. This patch avoids the condition by wrapping all GTT updates in stop_machine and using a flushing read prior to restarting the machine. The stop_machine guarantees no new Aperture accesses can begin while the PTE writes are being emmitted. The flushing read ensures that any following Aperture accesses cannot begin until the PTE writes have been cleared out of the GAM's fifo. Only FOLLOWING Aperture accesses need to be separated from in flight PTE updates. PTE Writes may follow tightly behind already in flight Aperture accesses, so no flushing read is required at the start of a PTE update sequence. This issue was reproduced by running igt/gem_readwrite and igt/gem_render_copy simultaneously from different processes, each in a tight loop, with INTEL_IOMMU enabled. This patch was originally published as: drm/i915: Serialize GTT Updates on BXT [Note: This will cause a performance penalty for some use cases, but avoiding hangs trumps performance hits. This may need to be worked around in Mesa to recover the lost performance.] v2: Move bxt/iommu detection into static function Remove #ifdef CONFIG_INTEL_IOMMU protection Make function names more reflective of purpose Move flushing read into static function v3: Tidy up for checkpatch.pl Testcase: igt/gem_concurrent_blit Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: John Harrison <john.C.Harrison@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: stable@vger.kernel.org Link: http://patchwork.freedesktop.org/patch/msgid/1495641251-30022-1-git-send-email-jon.bloomfield@intel.com Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 0ef34ad6222abfa513117515fec720c33a58f105) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-07xen/privcmd: Support correctly 64KB page granularity when mapping memoryJulien Grall
Commit 5995a68 "xen/privcmd: Add support for Linux 64KB page granularity" did not go far enough to support 64KB in mmap_batch_fn. The variable 'nr' is the number of 4KB chunk to map. However, when Linux is using 64KB page granularity the array of pages (vma->vm_private_data) contain one page per 64KB. Fix it by incrementing st->index correctly. Furthermore, st->va is not correctly incremented as PAGE_SIZE != XEN_PAGE_SIZE. Fixes: 5995a68 ("xen/privcmd: Add support for Linux 64KB page granularity") CC: stable@vger.kernel.org Reported-by: Feng Kan <fkan@apm.com> Signed-off-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-06-07nvme: relax APST default max latency to 100msKai-Heng Feng
Christoph Hellwig suggests we should to make APST work out of the box. Hence relax the the default max latency to make them able to enter deepest power state on default. Here are id-ctrl excerpts from two high latency NVMes: vid : 0x14a4 ssvid : 0x1b4b mn : CX2-GB1024-Q11 NVMe LITEON 1024GB ps 3 : mp:0.1000W non-operational enlat:5000 exlat:5000 rrt:3 rrl:3 rwt:3 rwl:3 idle_power:- active_power:- ps 4 : mp:0.0100W non-operational enlat:50000 exlat:100000 rrt:4 rrl:4 rwt:4 rwl:4 idle_power:- active_power:- vid : 0x15b7 ssvid : 0x1b4b mn : A400 NVMe SanDisk 512GB ps 3 : mp:0.0500W non-operational enlat:51000 exlat:10000 rrt:0 rrl:0 rwt:0 rwl:0 idle_power:- active_power:- ps 4 : mp:0.0055W non-operational enlat:1000000 exlat:100000 rrt:0 rrl:0 rwt:0 rwl:0 idle_power:- active_power:- Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-07nvme: only consider exit latency when choosing useful non-op power statesKai-Heng Feng
When a NVMe is in non-op states, the latency is exlat. The latency will be enlat + exlat only when the NVMe tries to transit from operational state right atfer it begins to transit to non-operational state, which should be a rare case. Therefore, as Andy Lutomirski suggests, use exlat only when deciding power states to trainsit to. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-07nvme-fc: fix missing put reference on controller create failureJames Smart
The failure case, of a create controller request, called nvme_uninit_ctrl() but didn't do a put to allow the nvme controller to be deleted. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-07nvme-fc: on lldd/transport io error, terminate associationJames Smart
Per FC-NVME, when lldd or transport detects an i/o error, the connection must be terminated, which in turn requires the association to be termianted. Currently the transport simply creates a nvme completion status of transport error and returns the io. The FC-NVME spec makes the mandate as initiator and host, depending on the error, can get out of sync on outstanding io counts (sqhd/sqtail). Implement the association teardown on lldd or transport detected errors. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2017-06-07nvme-rdma: fast fail incoming requests while we reconnectSagi Grimberg
When we encounter an transport/controller errors, error recovery kicks in which performs: 1. stops io/admin queues 2. moves transport queues out of LIVE state 3. fast fail pending io 4. schedule periodic reconnects. But we also need to fast fail incoming IO taht enters after we already scheduled. Given that our queue is not LIVE anymore, simply restart the request queues to fail in .queue_rq Reported-by: Alex Turin <alex@vastdata.com> Reported-by: shahar.salzman <shahar.salzman@gmail.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org
2017-06-07nvme-pci: fix multiple ctrl removal schedulingRakesh Pandit
Commit c5f6ce97c1210 tries to address multiple resets but fails as work_busy doesn't involve any synchronization and can fail. This is reproducible easily as can be seen by WARNING below which is triggered with line: WARN_ON(dev->ctrl.state == NVME_CTRL_RESETTING) Allowing multiple resets can result in multiple controller removal as well if different conditions inside nvme_reset_work fail and which might deadlock on device_release_driver. [ 480.327007] WARNING: CPU: 3 PID: 150 at drivers/nvme/host/pci.c:1900 nvme_reset_work+0x36c/0xec0 [ 480.327008] Modules linked in: rfcomm fuse nf_conntrack_netbios_ns nf_conntrack_broadcast... [ 480.327044] btusb videobuf2_core ghash_clmulni_intel snd_hwdep cfg80211 acer_wmi hci_uart.. [ 480.327065] CPU: 3 PID: 150 Comm: kworker/u16:2 Not tainted 4.12.0-rc1+ #13 [ 480.327065] Hardware name: Acer Predator G9-591/Mustang_SLS, BIOS V1.10 03/03/2016 [ 480.327066] Workqueue: nvme nvme_reset_work [ 480.327067] task: ffff880498ad8000 task.stack: ffffc90002218000 [ 480.327068] RIP: 0010:nvme_reset_work+0x36c/0xec0 [ 480.327069] RSP: 0018:ffffc9000221bdb8 EFLAGS: 00010246 [ 480.327070] RAX: 0000000000460000 RBX: ffff880498a98128 RCX: dead000000000200 [ 480.327070] RDX: 0000000000000001 RSI: ffff8804b1028020 RDI: ffff880498a98128 [ 480.327071] RBP: ffffc9000221be50 R08: 0000000000000000 R09: 0000000000000000 [ 480.327071] R10: ffffc90001963ce8 R11: 000000000000020d R12: ffff880498a98000 [ 480.327072] R13: ffff880498a53500 R14: ffff880498a98130 R15: ffff880498a98128 [ 480.327072] FS: 0000000000000000(0000) GS:ffff8804c1cc0000(0000) knlGS:0000000000000000 [ 480.327073] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 480.327074] CR2: 00007ffcf3c37f78 CR3: 0000000001e09000 CR4: 00000000003406e0 [ 480.327074] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 480.327075] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 480.327075] Call Trace: [ 480.327079] ? __switch_to+0x227/0x400 [ 480.327081] process_one_work+0x18c/0x3a0 [ 480.327082] worker_thread+0x4e/0x3b0 [ 480.327084] kthread+0x109/0x140 [ 480.327085] ? process_one_work+0x3a0/0x3a0 [ 480.327087] ? kthread_park+0x60/0x60 [ 480.327102] ret_from_fork+0x2c/0x40 [ 480.327103] Code: e8 5a dc ff ff 85 c0 41 89 c1 0f..... This patch addresses the problem by using state of controller to decide whether reset should be queued or not as state change is synchronizated using controller spinlock. Also cancel_work_sync is used to make sure remove cancels the reset_work and waits for it to finish. This patch also changes return value from -ENODEV to more appropriate -EBUSY if nvme_reset fails to change state. Fixes: c5f6ce97c1210 ("nvme: don't schedule multiple resets") Signed-off-by: Rakesh Pandit <rakesh@tuxera.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 03:43:33 +0000