summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-09-15serial: core: fix potential NULL pointer dereferenceAndy Shevchenko
The commit 761ed4a94582 ("tty: serial_core: convert uart_close to use tty_port_close") refactored uart_close() to use tty_port_close(). At the same time it introduced a potential NULL pointer dereference. Rearrange the code to avoid kernel crash. Fixes: 761ed4a94582 ("tty: serial_core: convert uart_close to use tty_port_close") Cc: Rob Herring <robh@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15BUG: atmel_serial: Interrupts not disabled on closeRichard Genoud
Since commit 18dfef9c7f87 ("serial: atmel: convert to irq handling provided mctrl-gpio"), interrupts from GPIOs are not disabled any more when the serial port is closed, leading to an oops when the one of the input pin is toggled (CTS/DSR/DCD/RNG). This is only the case if those pins are used as GPIOs, i.e. declared like that: usart1: serial@f8020000 { /* CTS and DTS will be handled by GPIO */ status = "okay"; rts-gpios = <&pioB 17 GPIO_ACTIVE_LOW>; cts-gpios = <&pioB 16 GPIO_ACTIVE_LOW>; dtr-gpios = <&pioB 14 GPIO_ACTIVE_LOW>; dsr-gpios = <&pioC 31 GPIO_ACTIVE_LOW>; rng-gpios = <&pioB 12 GPIO_ACTIVE_LOW>; dcd-gpios = <&pioB 15 GPIO_ACTIVE_LOW>; }; That's because modem interrupts used to be freed in atmel_shutdown(). After commit 18dfef9c7f87 ("serial: atmel: convert to irq handling provided mctrl-gpio"), this code was just removed. Calling atmel_disable_ms() disables the interrupts and everything works fine again. Tested on at91sam9g35-cm (This patch doesn't apply on -stable kernels, fixes for 4.4 and 4.7 will be sent after this one is applied.) Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Fixes: 18dfef9c7f87 ("serial: atmel: convert to irq handling provided mctrl-gpio") Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15tty: serial: fsl_lpuart: use GFP_ATOMIC under spin lockWei Yongjun
The function lpuart_start_rx_dma() is called from several places, in some of which, such as lpuart_startup(), a lock be held here, so we should use GFP_ATOMIC when a lock is held. Fixes: 5887ad43ee02 ("tty: serial: fsl_lpuart: Use cyclic DMA for Rx") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15serial: max310x: Set IRQF_TRIGGER_FALLING flag when dev.of_node is not NULLLiu Xiang
When dev.of_node is not NULL, we also need to set IRQF_TRIGGER_FALLING flag, otherwise it may cause uncertain interrupts. Signed-off-by: Liu Xiang <liu.xiang6@zte.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13serial: mxs-auart: Use PTR_ERR_OR_ZERO() to simplify the codeWei Yongjun
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR. Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13serial: mxs-auart: Disable clock on error pathFabio Estevam
We should disable the previously acquired clock when enabling s->clk fails. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13serial: core: Fix handling of options after MMIO addressAlexander Sverdlin
Guenter Roeck reported a regression caused by commit "serial: earlycon: Extend earlycon command line option to support 64-bit addresses": console= and earlycon= options have the following format: ...,<addr>,<options> Historically used here simple_strtoul() had no problems with comma, but the new and recommended kstrtoull() requires null-terminated string and returns -EINVAL in case there are "options" at the end. There is no recommended to use function currently that will support it, so stick to obsolete simple_strtoull() variant. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13serial: imx: add error messages when .probe failsUwe Kleine-König
Some functions called by serial_imx_probe emit an error message themself (like kmalloc() and friends). clk_prepare_enable() and devm_request_irq() however don't which might make the driver silently fail to probe. So add an error message for these. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-05Merge 4.8-rc5 into tty-nextGreg Kroah-Hartman
We want the fixes in here for merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-04Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "Two fixlet from the timers departement: - A fix for scheduler stalls in the tick idle code affecting NOHZ_FULL kernels - A trivial compile fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick/nohz: Fix softlockup on scheduler stalls in kvm guest clocksource/drivers/atmel-pit: Fix compilation error
2016-09-03Merge tag 'dm-4.8-fixes-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - a stable fix in both DM crypt and DM log-writes for too large bios (as generated by bcache) - two other stable fixes for DM log-writes - a stable fix for a DM crypt bug that could result in freeing pointers from uninitialized memory in the tfm allocation error path - a DM bufio cleanup to discontinue using create_singlethread_workqueue() * tag 'dm-4.8-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm bufio: remove use of deprecated create_singlethread_workqueue() dm crypt: fix free of bad values after tfm allocation failure dm crypt: fix error with too large bios dm log writes: fix check of kthread_run() return value dm log writes: fix bug with too large bios dm log writes: move IO accounting earlier to fix error path
2016-09-03Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: "arm64 and arm/perf fixes: - arm64 fix: debug exception unmasking on the CPU resume path - ARM PMU fixes: memory leak on error path and NULL pointer dereference" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kernel: Fix unmasked debug exceptions when restoring mdscr_el1 drivers/perf: arm_pmu: Fix NULL pointer dereference during probe drivers/perf: arm_pmu: Fix leak in error path
2016-09-03Merge tag 'char-misc-4.8-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are a number of small driver fixes for 4.8-rc5. The largest thing here is deleting an obsolete driver, drivers/misc/bh1780gli.c, as the functionality of it was replaced by an iio driver a while ago. The other fixes are things that have been reported, or reverts of broken stuff (the binder change). All of these changes have been in linux-next for a while with no reported issues" * tag 'char-misc-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: thunderbolt: Don't declare Falcon Ridge unsupported thunderbolt: Add support for INTEL_FALCON_RIDGE_2C controller. thunderbolt: Fix resume quirk for Falcon Ridge 4C. lkdtm: Mark lkdtm_rodata_do_nothing() notrace mei: me: disable driver on SPT SPS firmware Revert "android: binder: fix dangling pointer comparison" drivers/iio/light/Kconfig: SENSORS_BH1780 cleanup android: binder: fix dangling pointer comparison misc: delete bh1780 driver
2016-09-03Merge tag 'staging-4.8-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO driver fixes from Greg KH: "Here are a number of small fixes for staging and IIO drivers that resolve reported problems. Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'staging-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (35 commits) arm: dts: rockchip: add reset node for the exist saradc SoCs arm64: dts: rockchip: add reset saradc node for rk3368 SoCs iio: adc: rockchip_saradc: reset saradc controller before programming it iio: accel: kxsd9: Fix raw read return iio: adc: ti_am335x_adc: Increase timeout value waiting for ADC sample iio: adc: ti_am335x_adc: Protect FIFO1 from concurrent access include/linux: fix excess fence.h kernel-doc notation staging: wilc1000: correctly check if associatedsta has not been found staging: wilc1000: NULL dereference on error staging: wilc1000: txq_event: Fix coding error MAINTAINERS: Add file patterns for ion device tree bindings MAINTAINERS: Update maintainer entry for wilc1000 iio: chemical: atlas-ph-sensor: fix typo in val assignment iio: fix sched WARNING "do not call blocking ops when !TASK_RUNNING" staging: comedi: ni_mio_common: fix AO inttrig backwards compatibility staging: comedi: dt2811: fix a precedence bug staging: comedi: adv_pci1760: Do not return EINVAL for CMDF_ROUND_DOWN. staging: comedi: ni_mio_common: fix wrong insn_write handler staging: comedi: comedi_test: fix timer race conditions staging: comedi: daqboard2000: bug fix board type matching code ...
2016-09-03Merge tag 'tty-4.8-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fixes from Greg KH: "Here are some small serial driver fixes for 4.8-rc5. One fixes an oft-reported build issue with the fintek driver, another reverts a patch that was causing problems, one fixes a crash, and some new device ids were added. All of these have been in linux-next for a while" * tag 'tty-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250: added acces i/o products quad and octal serial cards serial: 8250_mid: fix divide error bug if baud rate is 0 Revert "tty/serial/8250: use mctrl_gpio helpers" 8250/fintek: rename IRQ_MODE macro
2016-09-03Merge tag 'usb-4.8-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY fixes from Greg KH: "Here are some USB and PHY driver fixes for 4.8-rc5 Nothing major, lots of little fixes for reported bugs, and a build fix for a missing .h file that the phy drivers needed. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits) usb: musb: Fix locking errors for host only mode usb: dwc3: gadget: always decrement by 1 usb: dwc3: debug: fix ep name on trace output usb: gadget: udc: core: don't starve DMA resources USB: serial: option: add WeTelecom 0x6802 and 0x6803 products USB: avoid left shift by -1 USB: fix typo in wMaxPacketSize validation usb: gadget: Add the gserial port checking in gs_start_tx() usb: dwc3: gadget: don't rely on jiffies while holding spinlock usb: gadget: fsl_qe_udc: signedness bug in qe_get_frame() usb: gadget: function: f_rndis: socket buffer may be NULL usb: gadget: function: f_eem: socket buffer may be NULL usb: renesas_usbhs: gadget: fix return value check in usbhs_mod_gadget_probe() usb: dwc2: Add reset control to dwc2 usb: dwc3: core: allow device to runtime_suspend several times usb: dwc3: pci: runtime_resume child device USB: serial: option: add WeTelecom WM-D200 usb: chipidea: udc: don't touch DP when controller is in host mode USB: serial: mos7840: fix non-atomic allocation in write path USB: serial: mos7720: fix non-atomic allocation in write path ...
2016-09-02Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A collection of fixes for the nvme over fabrics code" * 'for-linus' of git://git.kernel.dk/linux-block: nvme-rdma: Get rid of redundant defines nvme-rdma: Get rid of duplicate variable nvme: fabrics drivers don't need the nvme-pci driver nvme-fabrics: get a reference when reusing a nvme_host structure nvme-fabrics: change NQN UUID to big-endian format nvme-loop: set sqsize to 0-based value, per spec nvme-rdma: fix sqsize/hsqsize per spec fabrics: define admin sqsize min default, per spec nvmet-rdma: +1 to *queue_size from hsqsize/hrqsize nvmet-rdma: Fix use after free nvme-rdma: initialize ret to zero to avoid returning garbage
2016-09-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull TPM bugfix from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: tpm: invalid self test error message
2016-09-03tpm: invalid self test error messageJarkko Sakkinen
The driver emits invalid self test error message even though the init succeeds. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Fixes: cae8b441fc20 ("tpm: Factor out common startup code") Reviewed-by: James Morris <james.l.morris@oracle.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-09-02Merge tag 'acpi-4.8-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes ffrom Rafael Wysocki: "Two stable-candidate fixes for the ACPI early device probing code added during the 4.4 cycle, one fixing a typo in a stub macro used when CONFIG_ACPI is unset and one that prevents sleeping functions from being called under a spinlock (Lorenzo Pieralisi)" * tag 'acpi-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / drivers: replace acpi_probe_lock spinlock with mutex ACPI / drivers: fix typo in ACPI_DECLARE_PROBE_ENTRY macro
2016-09-02Merge tag 'pm-4.8-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "This includes a stable-candidate cpufreq-dt driver problem fix and annotations of tracepoints in the runtime PM framework. Specifics: - Fix the definition of the cpufreq-dt driver's machines table introduced during the 4.7 cycle that should be NULL-terminated, but the termination entry is missing from it (Wei Yongjun). - Annotate tracepoints in the runtime PM framework's core so as to allow the functions containing them to be called from the idle code path without causing RCU to complain about illegal usage (Paul McKenney)" * tag 'pm-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / runtime: Add _rcuidle suffix to allow rpm_idle() use from idle PM / runtime: Add _rcuidle suffix to allow rpm_resume() to be called from idle cpufreq: dt: Add terminate entry for of_device_id tables
2016-09-02Merge branches 'pm-cpufreq-fixes' and 'pm-core-fixes'Rafael J. Wysocki
* pm-cpufreq-fixes: cpufreq: dt: Add terminate entry for of_device_id tables * pm-core-fixes: PM / runtime: Add _rcuidle suffix to allow rpm_idle() use from idle PM / runtime: Add _rcuidle suffix to allow rpm_resume() to be called from idle
2016-09-02ACPI / drivers: replace acpi_probe_lock spinlock with mutexLorenzo Pieralisi
Commit e647b532275b ("ACPI: Add early device probing infrastructure") introduced code that allows inserting driver specific struct acpi_probe_entry probe entries into ACPI linker sections (one per-subsystem, eg irqchip, clocksource) that are then walked to retrieve the data and function hooks required to probe the respective kernel components. Probing for all entries in a section is triggered through the __acpi_probe_device_table() function, that in turn, according to the table ID a given probe entry reports parses the table with the function retrieved from the respective section structures (ie struct acpi_probe_entry). Owing to the current ACPI table parsing implementation, the __acpi_probe_device_table() function has to share global variables with the acpi_match_madt() function, so in order to guarantee mutual exclusion locking is required between the two functions. Current kernel code implements the locking through the acpi_probe_lock spinlock; this has the side effect of requiring all code called within the lock (ie struct acpi_probe_entry.probe_{table/subtbl} hooks) not to sleep. However, kernel subsystems that make use of the early probing infrastructure are relying on kernel APIs that may sleep (eg irq_domain_alloc_fwnode(), among others) in the function calls pointed at by struct acpi_probe_entry.{probe_table/subtbl} entries (eg gic_v2_acpi_init()), which is a bug. Since __acpi_probe_device_table() is called from context that is allowed to sleep the acpi_probe_lock spinlock can be replaced with a mutex; this fixes the issue whilst still guaranteeing mutual exclusion. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Fixes: e647b532275b (ACPI: Add early device probing infrastructure) Cc: 4.4+ <stable@vger.kernel.org> # 4.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-02drivers/perf: arm_pmu: Fix NULL pointer dereference during probeStefan Wahren
Patch 7f1d642fbb5c ("drivers/perf: arm-pmu: Fix handling of SPI lacking interrupt-affinity property") unintended also fixes perf_event support for bcm2835 which doesn't have PMU interrupts. Unfortunately this change introduce a NULL pointer dereference on bcm2835, because irq_is_percpu always expected to be called with a valid IRQ. So fix this regression by validating the IRQ before. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 7f1d642fbb5c ("drivers/perf: arm-pmu: Fix handling of SPI lacking "interrupt-affinity" property") Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-09-02drivers/perf: arm_pmu: Fix leak in error pathStefan Wahren
In case of a IRQ type mismatch in of_pmu_irq_cfg() the device node for interrupt affinity isn't freed. So fix this issue by calling of_node_put(). Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: fa8ad7889d83 ("arm: perf: factor arm_pmu core out to drivers") Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-09-02Merge tag 'dmaengine-fix-4.8-rc5' of ↵Linus Torvalds
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "The fixes this time are all in drivers: - possible NULL dereference in img-mdc - correct device identity for free_irq in at_xdmac - missing of_node_put() in fsl probe - fix debug log and hotchain corner case for pxa-dma - fix checking hardware bits in isr in usb dmac" * tag 'dmaengine-fix-4.8-rc5' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: img-mdc: fix a possible NULL dereference dmaengine: at_xdmac: fix to pass correct device identity to free_irq() dmaengine: fsl_raid: add missing of_node_put() in fsl_re_probe() dmaengine: pxa_dma: fix debug message dmaengine: pxa_dma: fix hotchain corner case dmaengine: usb-dmac: check CHCR.DE bit in usb_dmac_isr_channel()
2016-09-02Merge tag 'drm-fixes-for-4.8-rc5' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Contains fixes for imx, amdgpu, vc4, msm and one nouveau ACPI fix" * tag 'drm-fixes-for-4.8-rc5' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: record error code when ring test failed drm/amd/amdgpu: compute ring test fail during S4 on CI drm/amd/amdgpu: sdma resume fail during S4 on CI drm/nouveau/acpi: use DSM if bridge does not support D3cold drm/imx: fix crtc vblank state regression drm/imx: Add active plane reconfiguration support drm/msm: protect against faults from copy_from_user() in submit ioctl drm/msm: fix use of copy_from_user() while holding spinlock drm/vc4: Fix oops when userspace hands in a bad BO. drm/vc4: Fix overflow mem unreferencing when the binner runs dry. drm/vc4: Free hang state before destroying BO cache. drm/vc4: Fix handling of a pm_runtime_get_sync() success case. drm/vc4: Use drm_malloc_ab to fix large rendering jobs. drm/vc4: Use drm_free_large() on handles to match its allocation.
2016-09-02dmaengine: hsu: refactor hsu_dma_do_irq() to return intAndy Shevchenko
Since we have nice macro IRQ_RETVAL() we would use it to convert a flag of handled interrupt from int to irqreturn_t. The rationale of doing this is: a) hence we implicitly mark hsu_dma_do_irq() as an auxiliary function that can't be used as interrupt handler directly, and b) to be in align with serial driver which is using serial8250_handle_irq() that returns plain int by design. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02serial: earlycon: Extend earlycon command line option to support 64-bit ↵Alexander Sverdlin
addresses earlycon implementation used "unsigned long" internally, but there are systems (ARM with LPAE) where sizeof(unsigned long) == 4 and uart is mapped beyond 4GiB address range. Switch to resource_size_t internally and replace obsoleted simple_strtoul() with kstrtoull(). Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02tty/serial: mark __init early_smh_setup() staticBaoyou Xie
We get 1 warning when building kernel with W=1: drivers/tty/serial/earlycon-arm-semihost.c:56:12: warning: no previous prototype for 'early_smh_setup' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. so this patch marks this function with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02serial: 8250_dw: add ACPI support for uart on Hisilicon Hip05 SoCKefeng Wang
Add ACPI identifier for UART on Hisilicon Hip05 SoC, be careful that it is not 16550 compatible, and "reg-io-width" and "reg-shift" need be set properly by _DSD method in DSDT. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02serial: 8250_port: unify check of em485 variableAndy Shevchenko
Unify the check of em485 variable to be either (em485) or (!em485) instead of the explicit comparison to NULL. While here, remove redundant check in __do_stop_tx_rs485() and __stop_tx_rs485() since the functions ain't called with NULL value of em485 variable. Cc: "Matwey V. Kornilov" <matwey@sai.msu.ru> Tested-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02serial: 8250_port: fix runtime PM use in __do_stop_tx_rs485()Andy Shevchenko
There are calls to serial8250_rpm_{get|put}() in __do_stop_tx_rs485() that are certainly placed in a wrong location. I dunno how it had been tested with runtime PM enabled because it is obvious "sleep in atomic context" error. Besides that serial8250_rpm_get() is called immediately after an IO just happened. It implies that the device is already powered on, see implementation of serial8250_em485_rts_after_send() and serial8250_clear_fifos() for the details. There is no bug have been seen due to, as I can guess, use of auto suspend mode when scheduled transaction to suspend is invoked quite lately than it's needed for a few writes to the port. It might be possible to trigger a warning if stop_tx_timer fires when device is suspended. Refactor the code to use runtime PM only in case of timer function. Fixes: 0c66940d584d ("tty/serial/8250: fix RS485 half-duplex RX") Cc: "Matwey V. Kornilov" <matwey@sai.msu.ru> Tested-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02Allowing UART DMA to be configured on i.MX53Martyn Welch
The UART DMA was only being configured on i.MX6Q compatible devices. We know that the DMA also works for i.MX53 devices, so enable uart DMA for imx53 and let the device tree to configure if DMA should be used or not. Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02serial-uartlite: constify uart_ops structuresJulia Lawall
Check for uart_ops structures that are only stored in the ops field of a uart_port structure. This field is declared const, so uart_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct uart_ops i@p = { ... }; @ok@ identifier r.i; struct uart_port e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct uart_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct uart_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02tty: xuartps: constify uart_ops structuresJulia Lawall
Check for uart_ops structures that are only stored in the ops field of a uart_port structure. This field is declared const, so uart_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct uart_ops i@p = { ... }; @ok@ identifier r.i; struct uart_port e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct uart_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct uart_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02tty: serial: constify uart_ops structuresJulia Lawall
Check for uart_ops structures that are only stored in the ops field of a uart_port structure. This field is declared const, so uart_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct uart_ops i@p = { ... }; @ok@ identifier r.i; struct uart_port e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct uart_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct uart_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02tty: serial: jsm_tty: constify uart_ops structuresJulia Lawall
Check for uart_ops structures that are only stored in the ops field of a uart_port structure. This field is declared const, so uart_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct uart_ops i@p = { ... }; @ok@ identifier r.i; struct uart_port e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct uart_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct uart_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02serial/bcm63xx_uart: constify uart_ops structuresJulia Lawall
Check for uart_ops structures that are only stored in the ops field of a uart_port structure. This field is declared const, so uart_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct uart_ops i@p = { ... }; @ok@ identifier r.i; struct uart_port e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct uart_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct uart_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02serial: altera: constify uart_ops structuresJulia Lawall
Check for uart_ops structures that are only stored in the ops field of a uart_port structure. This field is declared const, so uart_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct uart_ops i@p = { ... }; @ok@ identifier r.i; struct uart_port e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct uart_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct uart_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02tty/serial: at91: constify uart_ops structuresJulia Lawall
Check for uart_ops structures that are only stored in the ops field of a uart_port structure. This field is declared const, so uart_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct uart_ops i@p = { ... }; @ok@ identifier r.i; struct uart_port e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct uart_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct uart_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02serial: st-asc: constify uart_ops structuresJulia Lawall
Check for uart_ops structures that are only stored in the ops field of a uart_port structure. This field is declared const, so uart_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct uart_ops i@p = { ... }; @ok@ identifier r.i; struct uart_port e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct uart_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct uart_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02Merge tag 'drm-vc4-fixes-2016-08-29' of https://github.com/anholt/linux into ↵Dave Airlie
drm-fixes This pull request brings in fixes for VC4 3D in 4.8, most of which are covered by testcases. * tag 'drm-vc4-fixes-2016-08-29' of https://github.com/anholt/linux: drm/vc4: Fix oops when userspace hands in a bad BO. drm/vc4: Fix overflow mem unreferencing when the binner runs dry. drm/vc4: Free hang state before destroying BO cache. drm/vc4: Fix handling of a pm_runtime_get_sync() success case. drm/vc4: Use drm_malloc_ab to fix large rendering jobs. drm/vc4: Use drm_free_large() on handles to match its allocation.
2016-09-02Merge tag 'imx-drm-fixes-2016-08-30' of ↵Dave Airlie
git://git.pengutronix.de/git/pza/linux into drm-fixes imx-drm atomic modeset regression fixes - add active plane reconfiguration support - add back crtc vblank state reporting * tag 'imx-drm-fixes-2016-08-30' of git://git.pengutronix.de/git/pza/linux: drm/imx: fix crtc vblank state regression drm/imx: Add active plane reconfiguration support
2016-09-01Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A collection of small fixes for various SoC vendor clk drivers" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: rockchip: mark aclk_emmc_noc as a critical clock on rk3399 clk: tegra: remove TEGRA_PLL_USE_LOCK for PLLD/PLLD2 clk: rockchip: fix incorrect GATE bits for {c, g}pll_aclk_perihp_src on rk3399 clk: rockchip: fix incorrect aclk_emmc source gate bits on rk3399 clk: renesas: r8a7795: Fix SD clocks clk: rockchip: fix rk3399 aclk_vio gate bit clk: sunxi-ng: Fix inverted test condition in ccu_helper_wait_for_lock
2016-09-01rapidio/tsi721: fix incorrect detection of address translation conditionAlexandre Bounine
Fix incorrect condition to identify involvment of a address translation mechanism. This bug results in NULL pointer kernel crash dump in cases when mapping of inbound RapidIO address range is requested within existing aprture. Link: http://lkml.kernel.org/r/20160901173144.2983-1-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Cc: <stable@vger.kernel.org> [4.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-01drivers/scsi/wd719x.c: remove last declaration using DEFINE_PCI_DEVICE_TABLEJoe Perches
Convert it to the preferred const struct pci_device_id instead. Link: http://lkml.kernel.org/r/95c5e4100c3cd4eda643624f5b70e8d7abceb86c.1472660229.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-01serial/arc: constify uart_ops structuresJulia Lawall
Check for uart_ops structures that are only stored in the ops field of a uart_port structure. This field is declared const, so uart_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct uart_ops i@p = { ... }; @ok@ identifier r.i; struct uart_port e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct uart_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct uart_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-01serial: 8250_dw: Use an unified new dev variable in probeKefeng Wang
Use an unified new dev variable instead of &pdev->dev and p->dev in probe function. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-01Merge branch 'msm-fixes-4.8' of git://people.freedesktop.org/~robclark/linux ↵Dave Airlie
into drm-fixes copy from user fixes. * 'msm-fixes-4.8' of git://people.freedesktop.org/~robclark/linux: drm/msm: protect against faults from copy_from_user() in submit ioctl drm/msm: fix use of copy_from_user() while holding spinlock
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 20:37:15 +0000