summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-01-16misc: cxl: use mmgrabJulia Lawall
Mmgrab was introduced in commit f1f1007644ff ("mm: add new mmgrab() helper") and most of the kernel was updated to use it. Update a remaining file. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) <smpl> @@ expression e; @@ - atomic_inc(&e->mm_count); + mmgrab(e); </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Acked-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1577634178-22530-2-git-send-email-Julia.Lawall@inria.fr
2020-01-05Merge tag 'riscv/for-v5.5-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Paul Walmsley: "Several fixes for RISC-V: - Fix function graph trace support - Prefix the CSR IRQ_* macro names with "RV_", to avoid collisions with macros elsewhere in the Linux kernel tree named "IRQ_TIMER" - Use __pa_symbol() when computing the physical address of a kernel symbol, rather than __pa() - Mark the RISC-V port as supporting GCOV One DT addition: - Describe the L2 cache controller in the FU540 DT file One documentation update: - Add patch acceptance guideline documentation" * tag 'riscv/for-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: Documentation: riscv: add patch acceptance guidelines riscv: prefix IRQ_ macro names with an RV_ namespace clocksource: riscv: add notrace to riscv_sched_clock riscv: ftrace: correct the condition logic in function graph tracer riscv: dts: Add DT support for SiFive L2 cache controller riscv: gcov: enable gcov for RISC-V riscv: mm: use __pa_symbol for kernel symbols
2020-01-04riscv: prefix IRQ_ macro names with an RV_ namespacePaul Walmsley
"IRQ_TIMER", used in the arch/riscv CSR header file, is a sufficiently generic macro name that it's used by several source files across the Linux code base. Some of these other files ultimately include the arch/riscv CSR include file, causing collisions. Fix by prefixing the RISC-V csr.h IRQ_ macro names with an RV_ prefix. Fixes: a4c3733d32a72 ("riscv: abstract out CSR names for supervisor vs machine mode") Reported-by: Olof Johansson <olof@lixom.net> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-04clocksource: riscv: add notrace to riscv_sched_clockZong Li
When enabling ftrace graph tracer, it gets the tracing clock in ftrace_push_return_trace(). Eventually, it invokes riscv_sched_clock() to get the clock value. If riscv_sched_clock() isn't marked with 'notrace', it will call ftrace_push_return_trace() and cause infinite loop. The result of failure as follow: command: echo function_graph >current_tracer [ 46.176787] Unable to handle kernel paging request at virtual address ffffffe04fb38c48 [ 46.177309] Oops [#1] [ 46.177478] Modules linked in: [ 46.177770] CPU: 0 PID: 256 Comm: $d Not tainted 5.5.0-rc1 #47 [ 46.177981] epc: ffffffe00035e59a ra : ffffffe00035e57e sp : ffffffe03a7569b0 [ 46.178216] gp : ffffffe000d29b90 tp : ffffffe03a756180 t0 : ffffffe03a756968 [ 46.178430] t1 : ffffffe00087f408 t2 : ffffffe03a7569a0 s0 : ffffffe03a7569f0 [ 46.178643] s1 : ffffffe00087f408 a0 : 0000000ac054cda4 a1 : 000000000087f411 [ 46.178856] a2 : 0000000ac054cda4 a3 : 0000000000373ca0 a4 : ffffffe04fb38c48 [ 46.179099] a5 : 00000000153e22a8 a6 : 00000000005522ff a7 : 0000000000000005 [ 46.179338] s2 : ffffffe03a756a90 s3 : ffffffe00032811c s4 : ffffffe03a756a58 [ 46.179570] s5 : ffffffe000d29fe0 s6 : 0000000000000001 s7 : 0000000000000003 [ 46.179809] s8 : 0000000000000003 s9 : 0000000000000002 s10: 0000000000000004 [ 46.180053] s11: 0000000000000000 t3 : 0000003fc815749c t4 : 00000000000efc90 [ 46.180293] t5 : ffffffe000d29658 t6 : 0000000000040000 [ 46.180482] status: 0000000000000100 badaddr: ffffffe04fb38c48 cause: 000000000000000f Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> [paul.walmsley@sifive.com: cleaned up patch description] Fixes: 92e0d143fdef ("clocksource/drivers/riscv_timer: Provide the sched_clock") Cc: stable@vger.kernel.org Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-04Merge tag 'mips_fixes_5.5_1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: "A collection of MIPS fixes: - Fill the struct cacheinfo shared_cpu_map field with sensible values, notably avoiding issues with perf which was unhappy in the absence of these values. - A boot fix for Loongson 2E & 2F machines which was fallout from some refactoring performed this cycle. - A Kconfig dependency fix for the Loongson CPU HWMon driver. - A couple of VDSO fixes, ensuring gettimeofday() behaves appropriately for kernel configurations that don't include support for a clocksource the VDSO can use & fixing the calling convention for the n32 & n64 VDSOs which would previously clobber the $gp/$28 register. - A build fix for vmlinuz compressed images which were inappropriately building with -fsanitize-coverage despite not being part of the kernel proper, then failing to link due to the missing __sanitizer_cov_trace_pc() function. - A couple of eBPF JIT fixes, including disabling it for MIPS32 due to a large number of issues with the code generated there & reflecting ISA dependencies in Kconfig to enforce that systems which don't support the JIT must include the interpreter" * tag 'mips_fixes_5.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Avoid VDSO ABI breakage due to global register variable MIPS: BPF: eBPF JIT: check for MIPS ISA compliance in Kconfig MIPS: BPF: Disable MIPS32 eBPF JIT MIPS: Prevent link failure with kcov instrumentation MIPS: Kconfig: Use correct form for 'depends on' mips: Fix gettimeofday() in the vdso library MIPS: Fix boot on Fuloong2 systems mips: cacheinfo: report shared CPU map
2020-01-04Merge tag 'dmaengine-fix-5.5-rc5' of ↵Linus Torvalds
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "A bunch of fixes for: - uninitialized dma_slave_caps access - virt-dma use after free in vchan_complete() - driver fixes for ioat, k3dma and jz4780" * tag 'dmaengine-fix-5.5-rc5' of git://git.infradead.org/users/vkoul/slave-dma: ioat: ioat_alloc_ring() failure handling. dmaengine: virt-dma: Fix access after free in vchan_complete() dmaengine: k3dma: Avoid null pointer traversal dmaengine: dma-jz4780: Also break descriptor chains on JZ4725B dmaengine: Fix access to uninitialized dma_slave_caps
2020-01-04Merge tag 'media/v5.5-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - some fixes at CEC core to comply with HDMI 2.0 specs and fix some border cases - a fix at the transmission logic of the pulse8-cec driver - one alignment fix on a data struct at ipu3 when built with 32 bits * tag 'media/v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: intel-ipu3: Align struct ipu3_uapi_awb_fr_config_s to 32 bytes media: pulse8-cec: fix lost cec_transmit_attempt_done() call media: cec: check 'transmit_in_progress', not 'transmitting' media: cec: avoid decrementing transmit_queue_sz if it is 0 media: cec: CEC 2.0-only bcast messages were ignored
2020-01-03Merge tag 'block-5.5-20200103' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Three fixes in here: - Fix for a missing split on default memory boundary mask (4G) (Ming) - Fix for multi-page read bio truncate (Ming) - Fix for null_blk zone close request handling (Damien)" * tag 'block-5.5-20200103' of git://git.kernel.dk/linux-block: null_blk: Fix REQ_OP_ZONE_CLOSE handling block: fix splitting segments on boundary masks block: add bio_truncate to fix guard_bio_eod
2020-01-03Merge tag 'drm-fixes-2020-01-03' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "New Years fixes! Mostly amdgpu with a light smattering of arm graphics, and two AGP warning fixes. Quiet as expected, hopefully we don't get a post holiday rush. agp: - two unused variable removed amdgpu: - ATPX regression fix - SMU metrics table locking fixes - gfxoff fix for raven - RLC firmware loading stability fix mediatek: - external display fix - dsi timing fix sun4i: - Fix double-free in connector/encoder cleanup (Stefan) maildp: - Make vtable static (Ben)" * tag 'drm-fixes-2020-01-03' of git://anongit.freedesktop.org/drm/drm: agp: remove unused variable arqsz in agp_3_5_enable() agp: remove unused variable mcapndx drm/amdgpu: correct RLC firmwares loading sequence drm/amdgpu: enable gfxoff for raven1 refresh drm/amdgpu/smu: add metrics table lock for vega20 (v2) drm/amdgpu/smu: add metrics table lock for navi (v2) drm/amdgpu/smu: add metrics table lock for arcturus (v2) drm/amdgpu/smu: add metrics table lock Revert "drm/amdgpu: simplify ATPX detection" drm/arm/mali: make malidp_mw_connector_helper_funcs static drm/sun4i: hdmi: Remove duplicate cleanup calls drm/mediatek: reduce the hbp and hfp for phy timing drm/mediatek: Fix can't get component for external display plane. drm/mediatek: Check return value of mtk_drm_ddp_comp_for_plane.
2020-01-03media: intel-ipu3: Align struct ipu3_uapi_awb_fr_config_s to 32 bytesSakari Ailus
A struct that needs to be aligned to 32 bytes has a size of 28. Increase the size to 32. This makes elements of arrays of this struct aligned to 32 as well, and other structs where members are aligned to 32 mixing ipu3_uapi_awb_fr_config_s as well as other types. Fixes: commit dca5ef2aa1e6 ("media: staging/intel-ipu3: remove the unnecessary compiler flags") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-01-03agp: remove unused variable arqsz in agp_3_5_enable()Yunfeng Ye
This patch fix the following warning: drivers/char/agp/isoch.c: In function ‘agp_3_5_enable’: drivers/char/agp/isoch.c:322:13: warning: variable ‘arqsz’ set but not used [-Wunused-but-set-variable] u32 isoch, arqsz; ^~~~~ Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-01-03agp: remove unused variable mcapndxYunfeng Ye
This patch fix the following warning: drivers/char/agp/isoch.c: In function ‘agp_3_5_isochronous_node_enable’: drivers/char/agp/isoch.c:87:5: warning: variable ‘mcapndx’ set but not used [-Wunused-but-set-variable] u8 mcapndx; ^~~~~~~ Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-01-02Merge tag 'amd-drm-fixes-5.5-2020-01-01' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.5-2020-01-01: amdgpu: - ATPX regression fix - SMU metrics table locking fixes - gfxoff fix for raven - RLC firmware loading stability fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200101151307.5242-1-alexander.deucher@amd.com
2020-01-02Merge tag 'drm-misc-fixes-2019-12-31' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes -sun4i: Fix double-free in connector/encoder cleanup (Stefan) -malidp: Make vtable static (Ben) Cc: Ben Dooks <ben.dooks@codethink.co.uk> Cc: Stefan Mavrodiev <stefan@olimex.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20191231152503.GA46740@art_vandelay
2020-01-02Merge tag 'mediatek-drm-fixes-5.5' of ↵Dave Airlie
https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes Mediatek DRM fixes for Linux 5.5 Signed-off-by: Dave Airlie <airlied@redhat.com> From: CK Hu <ck.hu@mediatek.com> Link: https://patchwork.freedesktop.org/patch/msgid/1577762298.23194.2.camel@mtksdaap41
2020-01-01drm/amdgpu: correct RLC firmwares loading sequenceEvan Quan
Per confirmation with RLC firmware team, the RLC should be unhalted after all RLC related firmwares uploaded. However, in fact the RLC is unhalted immediately after RLCG firmware uploaded. And that may causes unexpected PSP hang on loading the succeeding RLC save restore list related firmwares. So, we correct the firmware loading sequence to load RLC save restore list related firmwares before RLCG ucode. That will help to get around this issue. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix big endian overflow in nf_flow_table, from Arnd Bergmann. 2) Fix port selection on big endian in nft_tproxy, from Phil Sutter. 3) Fix precision tracking for unbound scalars in bpf verifier, from Daniel Borkmann. 4) Fix integer overflow in socket rcvbuf check in UDP, from Antonio Messina. 5) Do not perform a neigh confirmation during a pmtu update over a tunnel, from Hangbin Liu. 6) Fix DMA mapping leak in dpaa_eth driver, from Madalin Bucur. 7) Various PTP fixes for sja1105 dsa driver, from Vladimir Oltean. 8) Add missing to dummy definition of of_mdiobus_child_is_phy(), from Geert Uytterhoeven * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits) hsr: fix slab-out-of-bounds Read in hsr_debugfs_rename() net/sched: add delete_empty() to filters and use it in cls_flower tcp: Fix highest_sack and highest_sack_seq ptp: fix the race between the release of ptp_clock and cdev net: dsa: sja1105: Reconcile the meaning of TPID and TPID2 for E/T and P/Q/R/S Documentation: net: dsa: sja1105: Remove text about taprio base-time limitation net: dsa: sja1105: Remove restriction of zero base-time for taprio offload net: dsa: sja1105: Really make the PTP command read-write net: dsa: sja1105: Take PTP egress timestamp by port, not mgmt slot cxgb4/cxgb4vf: fix flow control display for auto negotiation mlxsw: spectrum: Use dedicated policer for VRRP packets mlxsw: spectrum_router: Skip loopback RIFs during MAC validation net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs net/sched: act_mirred: Pull mac prior redir to non mac_header_xmit device net_sched: sch_fq: properly set sk->sk_pacing_status bnx2x: Fix accounting of vlan resources among the PFs bnx2x: Use appropriate define for vlan credit of: mdio: Add missing inline to of_mdiobus_child_is_phy() dummy net: phy: aquantia: add suspend / resume ops for AQR105 dpaa_eth: fix DMA mapping leak ...
2019-12-30ptp: fix the race between the release of ptp_clock and cdevVladis Dronov
In a case when a ptp chardev (like /dev/ptp0) is open but an underlying device is removed, closing this file leads to a race. This reproduces easily in a kvm virtual machine: ts# cat openptp0.c int main() { ... fp = fopen("/dev/ptp0", "r"); ... sleep(10); } ts# uname -r 5.5.0-rc3-46cf053e ts# cat /proc/cmdline ... slub_debug=FZP ts# modprobe ptp_kvm ts# ./openptp0 & [1] 670 opened /dev/ptp0, sleeping 10s... ts# rmmod ptp_kvm ts# ls /dev/ptp* ls: cannot access '/dev/ptp*': No such file or directory ts# ...woken up [ 48.010809] general protection fault: 0000 [#1] SMP [ 48.012502] CPU: 6 PID: 658 Comm: openptp0 Not tainted 5.5.0-rc3-46cf053e #25 [ 48.014624] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... [ 48.016270] RIP: 0010:module_put.part.0+0x7/0x80 [ 48.017939] RSP: 0018:ffffb3850073be00 EFLAGS: 00010202 [ 48.018339] RAX: 000000006b6b6b6b RBX: 6b6b6b6b6b6b6b6b RCX: ffff89a476c00ad0 [ 48.018936] RDX: fffff65a08d3ea08 RSI: 0000000000000247 RDI: 6b6b6b6b6b6b6b6b [ 48.019470] ... ^^^ a slub poison [ 48.023854] Call Trace: [ 48.024050] __fput+0x21f/0x240 [ 48.024288] task_work_run+0x79/0x90 [ 48.024555] do_exit+0x2af/0xab0 [ 48.024799] ? vfs_write+0x16a/0x190 [ 48.025082] do_group_exit+0x35/0x90 [ 48.025387] __x64_sys_exit_group+0xf/0x10 [ 48.025737] do_syscall_64+0x3d/0x130 [ 48.026056] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 48.026479] RIP: 0033:0x7f53b12082f6 [ 48.026792] ... [ 48.030945] Modules linked in: ptp i6300esb watchdog [last unloaded: ptp_kvm] [ 48.045001] Fixing recursive fault but reboot is needed! This happens in: static void __fput(struct file *file) { ... if (file->f_op->release) file->f_op->release(inode, file); <<< cdev is kfree'd here if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL && !(mode & FMODE_PATH))) { cdev_put(inode->i_cdev); <<< cdev fields are accessed here Namely: __fput() posix_clock_release() kref_put(&clk->kref, delete_clock) <<< the last reference delete_clock() delete_ptp_clock() kfree(ptp) <<< cdev is embedded in ptp cdev_put module_put(p->owner) <<< *p is kfree'd, bang! Here cdev is embedded in posix_clock which is embedded in ptp_clock. The race happens because ptp_clock's lifetime is controlled by two refcounts: kref and cdev.kobj in posix_clock. This is wrong. Make ptp_clock's sysfs device a parent of cdev with cdev_device_add() created especially for such cases. This way the parent device with its ptp_clock is not released until all references to the cdev are released. This adds a requirement that an initialized but not exposed struct device should be provided to posix_clock_register() by a caller instead of a simple dev_t. This approach was adopted from the commit 72139dfa2464 ("watchdog: Fix the race between the release of watchdog_core_data and cdev"). See details of the implementation in the commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device"). Link: https://lore.kernel.org/linux-fsdevel/20191125125342.6189-1-vdronov@redhat.com/T/#u Analyzed-by: Stephen Johnston <sjohnsto@redhat.com> Analyzed-by: Vern Lovejoy <vlovejoy@redhat.com> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30net: dsa: sja1105: Reconcile the meaning of TPID and TPID2 for E/T and P/Q/R/SVladimir Oltean
For first-generation switches (SJA1105E and SJA1105T): - TPID means C-Tag (typically 0x8100) - TPID2 means S-Tag (typically 0x88A8) While for the second generation switches (SJA1105P, SJA1105Q, SJA1105R, SJA1105S) it is the other way around: - TPID means S-Tag (typically 0x88A8) - TPID2 means C-Tag (typically 0x8100) In other words, E/T tags untagged traffic with TPID, and P/Q/R/S with TPID2. So the patch mentioned below fixed VLAN filtering for P/Q/R/S, but broke it for E/T. We strive for a common code path for all switches in the family, so just lie in the static config packing functions that TPID and TPID2 are at swapped bit offsets than they actually are, for P/Q/R/S. This will make both switches understand TPID to be ETH_P_8021Q and TPID2 to be ETH_P_8021AD. The meaning from the original E/T was chosen over P/Q/R/S because E/T is actually the one with public documentation available (UM10944.pdf). Fixes: f9a1a7646c0d ("net: dsa: sja1105: Reverse TPID and TPID2") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30net: dsa: sja1105: Remove restriction of zero base-time for taprio offloadVladimir Oltean
The check originates from the initial implementation which was not based on PTP time but on a standalone clock source. In the meantime we can now program the PTPSCHTM register at runtime with the dynamic base time (actually with a value that is 200 ns smaller, to avoid writing DELTA=0 in the Schedule Entry Points Parameters Table). And we also have logic for moving the actual base time in the future of the PHC's current time base, so the check for zero serves no purpose, since even if the user will specify zero, that's not what will end up in the static config table where the limitation is. Fixes: 86db36a347b4 ("net: dsa: sja1105: Implement state machine for TAS with PTP clock source") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30net: dsa: sja1105: Really make the PTP command read-writeVladimir Oltean
When activating tc-taprio offload on the switch ports, the TAS state machine will try to check whether it is running or not, but will find both the STARTED and STOPPED bits as false in the sja1105_tas_check_running function. So the function will return -EINVAL (an abnormal situation) and the kernel will keep printing this from the TAS FSM workqueue: [ 37.691971] sja1105 spi0.1: An operation returned -22 The reason is that the underlying function that gets called, sja1105_ptp_commit, does not actually do a SPI_READ, but a SPI_WRITE. So the command buffer remains initialized with zeroes instead of retrieving the hardware state. Fix that. Fixes: 41603d78b362 ("net: dsa: sja1105: Make the PTP command read-write") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30net: dsa: sja1105: Take PTP egress timestamp by port, not mgmt slotVladimir Oltean
The PTP egress timestamp N must be captured from register PTPEGR_TS[n], where n = 2 * PORT + TSREG. There are 10 PTPEGR_TS registers, 2 per port. We are only using TSREG=0. As opposed to the management slots, which are 4 in number (SJA1105_NUM_PORTS, minus the CPU port). Any management frame (which includes PTP frames) can be sent to any non-CPU port through any management slot. When the CPU port is not the last port (#4), there will be a mismatch between the slot and the port number. Luckily, the only mainline occurrence with this switch (arch/arm/boot/dts/ls1021a-tsn.dts) does have the CPU port as #4, so the issue did not manifest itself thus far. Fixes: 47ed985e97f5 ("net: dsa: sja1105: Add logic for TX timestamping") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30cxgb4/cxgb4vf: fix flow control display for auto negotiationRahul Lakkireddy
As per 802.3-2005, Section Two, Annex 28B, Table 28B-2 [1], when _only_ Rx pause is enabled, both symmetric and asymmetric pause towards local device must be enabled. Also, firmware returns the local device's flow control pause params as part of advertised capabilities and negotiated params as part of current link attributes. So, fix up ethtool's flow control pause params fetch logic to read from acaps, instead of linkattr. [1] https://standards.ieee.org/standard/802_3-2005.html Fixes: c3168cabe1af ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities") Signed-off-by: Surendra Mobiya <surendra@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30null_blk: Fix REQ_OP_ZONE_CLOSE handlingDamien Le Moal
In order to match ZBC defined behavior, closing an empty zone must result in the "empty" zone condition instead of the "closed" condition. Fixes: da644b2cc1a4 ("null_blk: add zone open, close, and finish support") Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-29mlxsw: spectrum: Use dedicated policer for VRRP packetsIdo Schimmel
Currently, VRRP packets and packets that hit exceptions during routing (e.g., MTU error) are policed using the same policer towards the CPU. This means, for example, that misconfiguration of the MTU on a routed interface can prevent VRRP packets from reaching the CPU, which in turn can cause the VRRP daemon to assume it is the Master router. Fix this by using a dedicated policer for VRRP packets. Fixes: 11566d34f895 ("mlxsw: spectrum: Add VRRP traps") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alex Veber <alexve@mellanox.com> Tested-by: Alex Veber <alexve@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-29mlxsw: spectrum_router: Skip loopback RIFs during MAC validationAmit Cohen
When a router interface (RIF) is created the MAC address of the backing netdev is verified to have the same MSBs as existing RIFs. This is required in order to avoid changing existing RIF MAC addresses that all share the same MSBs. Loopback RIFs are special in this regard as they do not have a MAC address, given they are only used to loop packets from the overlay to the underlay. Without this change, an error is returned when trying to create a RIF after the creation of a GRE tunnel that is represented by a loopback RIF. 'rif->dev->dev_addr' points to the GRE device's local IP, which does not share the same MSBs as physical interfaces. Adding an IP address to any physical interface results in: Error: mlxsw_spectrum: All router interface MAC addresses must have the same prefix. Fix this by skipping loopback RIFs during MAC validation. Fixes: 74bc99397438 ("mlxsw: spectrum_router: Veto unsupported RIF MAC addresses") Signed-off-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-29drm/amdgpu: enable gfxoff for raven1 refreshchangzhu
When smu version is larger than 0x41e2b, it will load raven_kicker_rlc.bin.To enable gfxoff for raven_kicker_rlc.bin,it needs to avoid adev->pm.pp_feature &= ~PP_GFXOFF_MASK when it loads raven_kicker_rlc.bin. Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-29drm/amdgpu/smu: add metrics table lock for vega20 (v2)Alex Deucher
To protect access to the metrics table. v2: unlock on error Bug: https://gitlab.freedesktop.org/drm/amd/issues/900 Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-12-29drm/amdgpu/smu: add metrics table lock for navi (v2)Alex Deucher
To protect access to the metrics table. v2: unlock on error Bug: https://gitlab.freedesktop.org/drm/amd/issues/900 Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-12-29drm/amdgpu/smu: add metrics table lock for arcturus (v2)Alex Deucher
To protect access to the metrics table. v2: unlock on error Bug: https://gitlab.freedesktop.org/drm/amd/issues/900 Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-12-29drm/amdgpu/smu: add metrics table lockAlex Deucher
This table is used for lots of things, add it's own lock. Bug: https://gitlab.freedesktop.org/drm/amd/issues/900 Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-12-29Revert "drm/amdgpu: simplify ATPX detection"Alex Deucher
This reverts commit f5fda6d89afe6e9cedaa1c3303903c905262f6e8. You can't use BASE_CLASS in pci_get_class. Bug: https://gitlab.freedesktop.org/drm/amd/issues/995 Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-27Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four fixes and one spelling update, all in drivers: two in lpfc and the rest in mp3sas, cxgbi and target" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target/iblock: Fix protection error with blocks greater than 512B scsi: libcxgbi: fix NULL pointer dereference in cxgbi_device_destroy() scsi: lpfc: fix spelling mistakes of asynchronous scsi: lpfc: fix build failure with DEBUGFS disabled scsi: mpt3sas: Fix double free in attach error handling
2019-12-27net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCsMartin Blumenstingl
GXBB and newer SoCs use the fixed FCLK_DIV2 (1GHz) clock as input for the m250_sel clock. Meson8b and Meson8m2 use MPLL2 instead, whose rate can be adjusted at runtime. So far we have been running MPLL2 with ~250MHz (and the internal m250_div with value 1), which worked enough that we could transfer data with an TX delay of 4ns. Unfortunately there is high packet loss with an RGMII PHY when transferring data (receiving data works fine though). Odroid-C1's u-boot is running with a TX delay of only 2ns as well as the internal m250_div set to 2 - no lost (TX) packets can be observed with that setting in u-boot. Manual testing has shown that the TX packet loss goes away when using the following settings in Linux (the vendor kernel uses the same settings): - MPLL2 clock set to ~500MHz - m250_div set to 2 - TX delay set to 2ns on the MAC side Update the m250_div divider settings to only accept dividers greater or equal 2 to fix the TX delay generated by the MAC. iperf3 results before the change: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 182 MBytes 153 Mbits/sec 514 sender [ 5] 0.00-10.00 sec 182 MBytes 152 Mbits/sec receiver iperf3 results after the change (including an updated TX delay of 2ns): [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-10.00 sec 927 MBytes 778 Mbits/sec 0 sender [ 5] 0.00-10.01 sec 927 MBytes 777 Mbits/sec receiver Fixes: 4f6a71b84e1afd ("net: stmmac: dwmac-meson8b: fix internal RGMII clock configuration") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27Merge tag 'drm-fixes-2019-12-28' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Post-xmas food coma recovery fixes. Only three fixes for i915 since I expect most people are holidaying. i915: - power management rc6 fix - framebuffer tracking fix - display power management ratelimit fix" * tag 'drm-fixes-2019-12-28' of git://anongit.freedesktop.org/drm/drm: drm/i915: Hold reference to intel_frontbuffer as we track activity drm/i915/gt: Ratelimit display power w/a drm/i915/pmu: Ensure monotonic rc6
2019-12-27Merge tag 'pm-5.5-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Fix compile test of the Tegra devfreq driver (Arnd Bergmann) and remove redundant Kconfig dependencies from multiple devfreq drivers (Leonard Crestez)" * tag 'pm-5.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / devfreq: tegra: Add COMMON_CLK dependency PM / devfreq: Drop explicit selection of PM_OPP
2019-12-27Merge tag 'libata-5.5-20191226' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull libata fixes from Jens Axboe: "Two things in here: - First half of a series that fixes ahci_brcm, also marked for stable. The other part of the series is going into 5.6 (Florian) - sata_nv regression fix that is also marked for stable (Sascha)" * tag 'libata-5.5-20191226' of git://git.kernel.dk/linux-block: ata: ahci_brcm: Add missing clock management during recovery ata: ahci_brcm: BCM7425 AHCI requires AHCI_HFLAG_DELAY_ENGINE ata: ahci_brcm: Fix AHCI resources management ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys() libata: Fix retrieving of active qcs
2019-12-27Merge tag 'block-5.5-20191226' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Only thing here are the changes from Arnd from last week, which now have the appropriate header include to ensure they actually compile if COMPAT is enabled" * tag 'block-5.5-20191226' of git://git.kernel.dk/linux-block: compat_ioctl: block: handle Persistent Reservations compat_ioctl: block: handle add zone open, close and finish ioctl compat_ioctl: block: handle BLKGETZONESZ/BLKGETNRZONES compat_ioctl: block: handle BLKREPORTZONE/BLKRESETZONE pktcdvd: fix regression on 64-bit architectures
2019-12-27Merge tag 'gpio-v5.5-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "A set of fixes for the v5.5 series: - Fix the build for the Xtensa driver. - Make sure to set up the parent device for mpc8xxx. - Clarify the look-up error message. - Fix the usage of the line direction in the mockup device. - Fix a type warning on the Aspeed driver. - Remove the pointless __exit annotation on the xgs-iproc which is causing a compilation problem. - Fix up emultation of open drain outputs .get_direction() - Fix the IRQ callbacks on the PCA953xx to use bitops and work properly. - Fix the Kconfig on the Tegra driver" * tag 'gpio-v5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: tegra186: Allow building on Tegra194-only configurations gpio: pca953x: Switch to bitops in IRQ callbacks gpiolib: fix up emulated open drain outputs MAINTAINERS: Append missed file to the database gpio: xgs-iproc: remove __exit annotation for iproc_gpio_remove gpio: aspeed: avoid return type warning gpio: mockup: Fix usage of new GPIO_LINE_DIRECTION gpio: Fix error message on out-of-range GPIO in lookup table gpio: mpc8xxx: Add platform device to gpiochip->parent gpio: xtensa: fix driver build
2019-12-27ioat: ioat_alloc_ring() failure handling.Alexander.Barabash@dell.com
If dma_alloc_coherent() returns NULL in ioat_alloc_ring(), ring allocation must not proceed. Until now, if the first call to dma_alloc_coherent() in ioat_alloc_ring() returned NULL, the processing could proceed, failing with NULL-pointer dereferencing further down the line. Signed-off-by: Alexander Barabash <alexander.barabash@dell.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/75e9c0e84c3345d693c606c64f8b9ab5@x13pwhopdag1307.AMER.DELL.COM Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26bnx2x: Fix accounting of vlan resources among the PFsManish Chopra
While testing max vlan configuration on the PF, firmware gets assert as driver was configuring number of vlans more than what is supported per port/engine, it was figured out that there is an implicit vlan (hidden default vlan consuming hardware cam entry resource) which is configured default for all the clients (PF/VFs) on client_init ramrod by the adapter implicitly, so when allocating resources among the PFs this implicit vlan should be considered or total vlan entries should be reduced by one to accommodate that default/implicit vlan entry. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26bnx2x: Use appropriate define for vlan creditManish Chopra
Although it has same value as MAX_MAC_CREDIT_E2, use MAX_VLAN_CREDIT_E2 appropriately. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26net: phy: aquantia: add suspend / resume ops for AQR105Madalin Bucur
The suspend/resume code for AQR107 works on AQR105 too. This patch fixes issues with the partner not seeing the link down when the interface using AQR105 is brought down. Fixes: bee8259dd31f ("net: phy: add driver for aquantia phy") Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26dpaa_eth: fix DMA mapping leakMadalin Bucur
On the error path some fragments remain DMA mapped. Adding a fix that unmaps all the fragments. Rework cleanup path to be simpler. Fixes: 8151ee88bad5 ("dpaa_eth: use page backed rx buffers") Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26net/mlxfw: Fix out-of-memory error in mfa2 flash burningVladyslav Tarasiuk
The burning process requires to perform internal allocations of large chunks of memory. This memory doesn't need to be contiguous and can be safely allocated by vzalloc() instead of kzalloc(). This patch changes such allocation to avoid possible out-of-memory failure. Fixes: 410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process") Signed-off-by: Vladyslav Tarasiuk <vladyslavt@mellanox.com> Reviewed-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25ata: ahci_brcm: Add missing clock management during recoveryFlorian Fainelli
The downstream implementation of ahci_brcm.c did contain clock management recovery, but until recently, did that outside of the libahci_platform helpers and this was unintentionally stripped out while forward porting the patch upstream. Add the missing clock management during recovery and sleep for 10 milliseconds per the design team recommendations to ensure the SATA PHY controller and AFE have been fully quiesced. Fixes: eb73390ae241 ("ata: ahci_brcm: Recover from failures to identify devices") Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-25ata: ahci_brcm: BCM7425 AHCI requires AHCI_HFLAG_DELAY_ENGINEFlorian Fainelli
Set AHCI_HFLAG_DELAY_ENGINE for the BCM7425 AHCI controller thus making it conforming to the 'strict' AHCI implementation which this controller is based on. This solves long link establishment with specific hard drives (e.g.: Seagate ST1000VM002-9ZL1 SC12) that would otherwise have to complete the error recovery handling before finally establishing a succesful SATA link at the desired speed. We re-order the hpriv->flags assignment to also remove the NONCQ quirk since we can set the flag directly. Fixes: 9586114cf1e9 ("ata: ahci_brcmstb: add support MIPS-based platforms") Fixes: 423be77daabe ("ata: ahci_brcmstb: add quirk for broken ncq") Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-25ata: ahci_brcm: Fix AHCI resources managementFlorian Fainelli
The AHCI resources management within ahci_brcm.c is a little convoluted, largely because it historically had a dedicated clock that was managed within this file in the downstream tree. Once brough upstream though, the clock was left to be managed by libahci_platform.c which is entirely appropriate. This patch series ensures that the AHCI resources are fetched and enabled before any register access is done, thus avoiding bus errors on platforms which clock gate the controller by default. As a result we need to re-arrange the suspend() and resume() functions in order to avoid accessing registers after the clocks have been turned off respectively before the clocks have been turned on. Finally, we can refactor brcm_ahci_get_portmask() in order to fetch the number of ports from hpriv->mmio which is now accessible without jumping through hoops like we used to do. The commit pointed in the Fixes tag is both old and new enough not to require major headaches for backporting of this patch. Fixes: eba68f829794 ("ata: ahci_brcmstb: rename to support across Broadcom SoC's") Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-25ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys()Florian Fainelli
This reverts commit 6bb86fefa086faba7b60bb452300b76a47cde1a5 ("libahci_platform: Staticize ahci_platform_<en/dis>able_phys()") we are going to need ahci_platform_{enable,disable}_phys() in a subsequent commit for ahci_brcm.c in order to properly control the PHY initialization order. Also make sure the function prototypes are declared in include/linux/ahci_platform.h as a result. Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-25libata: Fix retrieving of active qcsSascha Hauer
ata_qc_complete_multiple() is called with a mask of the still active tags. mv_sata doesn't have this information directly and instead calculates the still active tags from the started tags (ap->qc_active) and the finished tags as (ap->qc_active ^ done_mask) Since 28361c40368 the hw_tag and tag are no longer the same and the equation is no longer valid. In ata_exec_internal_sg() ap->qc_active is initialized as 1ULL << ATA_TAG_INTERNAL, but in hardware tag 0 is started and this will be in done_mask on completion. ap->qc_active ^ done_mask becomes 0x100000000 ^ 0x1 = 0x100000001 and thus tag 0 used as the internal tag will never be reported as completed. This is fixed by introducing ata_qc_get_active() which returns the active hardware tags and calling it where appropriate. This is tested on mv_sata, but sata_fsl and sata_nv suffer from the same problem. There is another case in sata_nv that most likely needs fixing as well, but this looks a little different, so I wasn't confident enough to change that. Fixes: 28361c403683 ("libata: add extra internal command") Cc: stable@vger.kernel.org Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Add missing export of ata_qc_get_active(), as per Pali. Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 08:52:09 +0000