summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-12-14Merge branch 'clk-fixes' into clk-nextStephen Boyd
* clk-fixes: clk: qcom: qcs404: Fix gpll0_out_main parent clk: zynqmp: Off by one in zynqmp_is_valid_clock() clk: mmp: Off by one in mmp_clk_add() clk: mvebu: Off by one bugs in cp110_of_clk_get() arm64: dts: qcom: sdm845-mtp: Mark protected gcc clocks clk: zynqmp: handle fixed factor param query error clk: qcom: gcc: Fix board clock node name clk: meson: axg: mark fdiv2 and fdiv3 as critical clk: meson-gxbb: set fclk_div3 as CLK_IS_CRITICAL clk: fixed-factor: fix of_node_get-put imbalance
2018-12-14Merge branch 'clk-qcom-8998-resets' into clk-nextStephen Boyd
- Add resets and make Qualcomm MSM8998 GCC driver more functional * clk-qcom-8998-resets: clk: qcom: Drop unused 8998 clock clk: qcom: Leave mmss noc on for 8998 clk: qcom: Add missing msm8998 resets clk: qcom: gcc-msm8998: Add clkref clocks clk: qcom: gcc-msm8998: Disable halt check of UFS clocks clk: qcom: gcc-msm8998: Drop hmss_dvm and lpass_at clk: qcom: Enumerate remaining msm8998 resets clk: qcom: Add xo dummy clk on msm8998 clk: qcom: Fix MSM8998 resets
2018-12-14clk: qcom: Drop unused 8998 clockJeffrey Hugo
gcc_lpass_trig_clk is not used downstream, therefore there is no reason to expect it to be needed for clients. Let's remove it because messing with the clock has been observed to cause Linux hangs when the qdss_clk is initialized by rpmcc. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Fixes: 4807c71cc688 (arm64: dts: Add msm8998 SoC and MTP board support) Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-14clk: qcom: Leave mmss noc on for 8998Jeffrey Hugo
Similar to other qcom targets, gcc_mmss_noc_cfg_ahb_clk should not be disabled. Any mmss access depends on this clock, and its been observed that enabling mmssnoc_axi_rpm_clk with rpmcc results in an implicit access to mmss and will crash the system if gcc_mmss_noc_cfg_ahb_clk is disabled. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Fixes: 4807c71cc688 (arm64: dts: Add msm8998 SoC and MTP board support) Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-14Merge branches 'clk-imx7ulp', 'clk-imx6-fixes', 'clk-imx-fixes', ↵Stephen Boyd
'clk-imx8qxp' and 'clk-imx8mq' into clk-next - NXP i.MX7ULP SoC clock support - Support for i.MX8QXP SoC clocks - Support for NXP i.MX8MQ clock controllers * clk-imx7ulp: clk: imx: add imx7ulp clk driver clk: imx: implement new clk_hw based APIs clk: imx: make mux parent strings const dt-bindings: clock: add imx7ulp clock binding doc clk: imx: add imx7ulp composite clk support clk: imx: add pfdv2 support clk: imx: add pllv4 support clk: fractional-divider: add CLK_FRAC_DIVIDER_ZERO_BASED flag support clk: imx: add gatable clock divider support * clk-imx6-fixes: clk: imx6q: handle ENET PLL bypass clk: imx6q: optionally get CCM inputs via standard clock handles clk: imx6q: reset exclusive gates on init * clk-imx-fixes: clk: imx6q: add DCICx clocks gate clk: imx6sl: ensure MMDC CH0 handshake is bypassed clk: imx7d: remove UART1 clock setting * clk-imx8qxp: clk: imx: add imx8qxp lpcg driver clk: imx: add lpcg clock support clk: imx: add imx8qxp clk driver clk: imx: add scu clock common part clk: imx: add configuration option for mmio clks dt-bindings: clock: add imx8qxp lpcg clock binding dt-bindings: clock: imx8qxp: add SCU clock IDs firmware: imx: add pm svc headfile dt-bindings: fsl: scu: update power domain binding firmware: imx: remove resource id enums dt-bindings: imx: add scu resource id headfile * clk-imx8mq: clk: imx: Make the i.MX8MQ CCM clock driver CLK_IMX8MQ dependant clk: imx: remove redundant initialization of ret to zero clk: imx: Add SCCG PLL type clk: imx: Add fractional PLL output clock clk: imx: Add clock driver for i.MX8MQ CCM clk: imx: Add imx composite clock dt-bindings: Add binding for i.MX8MQ CCM
2018-12-14Merge branches 'clk-renesas', 'clk-allwinner', 'clk-tegra', 'clk-meson' and ↵Stephen Boyd
'clk-rockchip' into clk-next * clk-renesas: clk: renesas: rcar-gen3: Add HS400 quirk for SD clock clk: renesas: rcar-gen3: Add documentation for SD clocks clk: renesas: rcar-gen3: Set state when registering SD clocks clk: renesas: r8a77995: Simplify PLL3 multiplier/divider clk: renesas: r8a77995: Add missing CPEX clock clk: renesas: r8a77995: Remove non-existent SSP clocks clk: renesas: r8a77995: Remove non-existent VIN5-7 module clocks clk: renesas: r8a77995: Correct parent clock of DU clk: renesas: r8a77990: Correct parent clock of DU clk: renesas: r8a77970: Add CPEX clock clk: renesas: r8a77965: Add CPEX clock clk: renesas: r8a7796: Add CPEX clock clk: renesas: r8a7795: Add CPEX clock clk: renesas: r8a774a1: Add CPEX clock dt-bindings: clock: r8a7796: Remove CSIREF clock dt-bindings: clock: r8a7795: Remove CSIREF clock clk: renesas: Mark rza2_cpg_clk_register static clk: renesas: r7s9210: Add USB clocks clk: renesas: r8a77970: Add RPC clocks clk: renesas: r7s9210: Add SDHI clocks * clk-allwinner: clk: sunxi-ng: a64: Allow parent change for VE clock clk: sunxi-ng: a33: Set CLK_SET_RATE_PARENT for all audio module clocks clk: sunxi-ng: a33: Use sigma-delta modulation for audio PLL clk: sunxi-ng: h3: Allow parent change for ve clock clk: sunxi-ng: add support for suniv F1C100s SoC dt-bindings: clock: Add Allwinner suniv F1C100s CCU clk: sunxi-ng: h3/h5: Fix CSI_MCLK parent clk: sunxi-ng: r40: Force LOSC parent to RTC LOSC output clk: sunxi-ng: sun50i: a64: Use sigma-delta modulation for audio PLL clk: sunxi-ng: a64: Fix gate bit of DSI DPHY clk: sunxi-ng: Enable DE2_CCU for SUN8I and SUN50I clk: sunxi-ng: Add support for H6 DE3 clocks dt-bindings: clock: sun8i-de2: Add H6 DE3 clock description clk: sunxi-ng: h6: Set video PLLs limits clk: sunxi-ng: Use u64 for calculation of NM rate clk: sunxi-ng: Adjust MP clock parent rate when allowed clk: sunxi-ng: sun50i: h6: Fix MMC clock mux width clk: sunxi-ng: enable so-said LDOs for A64 SoC's pll-mipi clock * clk-tegra: clk: tegra: Return the exact clock rate from clk_round_rate clk: tegra30: Use Tegra CPU powergate helper function soc/tegra: pmc: Drop SMP dependency from CPU APIs clk: tegra: Fix maximum audio sync clock for Tegra124/210 clk: tegra: get rid of duplicate defines clk: tegra20: Check whether direct PLLM sourcing is turned off for EMC clk: tegra20: Turn EMC clock gate into divider * clk-meson: (25 commits) clk: meson: axg-audio: use the clk input helper function clk: meson: add clk-input helper function clk: meson: Mark some things static clk: meson: meson8b: add the read-only video clock trees clk: meson: meson8b: add the fractional divider for vid_pll_dco clk: meson: meson8b: fix the offset of vid_pll_dco's N value clk: meson: Fix GXL HDMI PLL fractional bits width clk: meson: meson8b: add the CPU clock post divider clocks clk: meson: meson8b: rename cpu_div2/cpu_div3 to cpu_in_div2/cpu_in_div3 clk: meson: clk-regmap: add read-only gate ops clk: meson: meson8b: allow changing the CPU clock tree clk: meson: meson8b: run from the XTAL when changing the CPU frequency clk: meson: meson8b: add support for more M/N values in sys_pll clk: meson: meson8b: mark the CPU clock as CLK_IS_CRITICAL clk: meson: meson8b: do not use cpu_div3 for cpu_scale_out_sel clk: meson: clk-pll: check if the clock is already enabled clk: meson: meson8b: fix the width of the cpu_scale_div clock clk: meson: meson8b: fix incorrect divider mapping in cpu_scale_table clk: meson: meson8b: use the HHI syscon if available dt-bindings: clock: meson8b: use the registers from the HHI syscon ... * clk-rockchip: clk: rockchip: add clock-id to gate of ACODEC for rk3328 clk: rockchip: add clock ID of ACODEC for rk3328 clk: rockchip: fix ID of 8ch clock of I2S1 for rk3328 clk: rockchip: fix I2S1 clock gate register for rk3328 clk: rockchip: make rk3188 hclk_vio_bus critical clk: rockchip: fix rk3188 sclk_mac_lbtest parameter ordering clk: rockchip: fix rk3188 sclk_smc gate data clk: rockchip: fix typo in rk3188 spdif_frac parent
2018-12-14Merge branches 'clk-managed-registration', 'clk-spdx', 'clk-remove-basic' ↵Stephen Boyd
and 'clk-ops-const' into clk-next - Make devm_of_clk_add_hw_provider() use parent dt node if necessary - Various SPDX taggings - Mark clk_ops const when possible * clk-managed-registration: clk: bd718x7: Initial support for ROHM bd71837/bd71847 PMIC clock clk: apcs-msm8916: simplify probe cleanup by using devm clk: clk-twl6040: Free of_provider at remove clk: rk808: use managed version of of_provider registration clk: clk-hi655x: Free of_provider at remove clk: of-provider: look at parent if registered device has no provider info clk: Add kerneldoc to managed of-provider interfaces * clk-spdx: clk: Tag basic clk types with SPDX clk: Tag clk core files with SPDX clk: bcm2835: Switch to SPDX identifier * clk-remove-basic: clk: Loongson1: Remove usage of CLK_IS_BASIC clk: samsung: s3c2410: Remove usage of CLK_IS_BASIC clk: versatile: sp810: Remove usage of CLK_IS_BASIC clk: hisilicon: Remove usage of CLK_IS_BASIC clk: h8300: Remove usage of CLK_IS_BASIC clk: axm5516: Remove usage of CLK_IS_BASIC clk: st: Remove usage of CLK_IS_BASIC clk: renesas: Remove usage of CLK_IS_BASIC * clk-ops-const: clk: s2mps11: constify clk_ops structure clk: pxa: constify clk_ops structures clk: pistachio: constify clk_ops structures clk: palmas: constify clk_ops structure clk: max77686: constify clk_ops structure
2018-12-14clk: tegra: Return the exact clock rate from clk_round_rateRobert Yang
The current behavior is that clk_round_rate would return the same clock rate passed to it for valid PLL configurations. This change will return the exact rate the PLL will provide in accordance with clk API. Signed-off-by: Robert Yang <decatf@gmail.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-14clk: tegra30: Use Tegra CPU powergate helper functionJon Hunter
Rather than using the tegra_powergate_is_powered() function for determining if a CPU is powered, use the tegra_pmc_cpu_is_powered() instead which was created to get the CPU power status. Internally tegra_pmc_cpu_is_powered() calls tegra_powergate_is_powered() and so is equivalent. The Tegra30 clock driver is the only public user of tegra_powergate_is_powered() and so by updating the Tegra30 clock driver to use tegra_pmc_cpu_is_powered(), we can then make tegra_powergate_is_powered() a non-public function. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-14soc/tegra: pmc: Drop SMP dependency from CPU APIsJon Hunter
When CONFIG_SMP is disabled, the tegra clk driver now fails to build: drivers/clk/tegra/clk-tegra30.c: In function ‘tegra30_cpu_rail_off_ready’: drivers/clk/tegra/clk-tegra30.c:1151:2: error: implicit declaration of function ‘tegra_pmc_cpu_is_powered’ [-Werror=implicit-function-declaration] cpu_pwr_status = tegra_pmc_cpu_is_powered(1) || ^ Fix the above error by removing the CONFIG_SMP ifdef around the declaration around the PMC CPU APIs because although these are not needed for non-SMP configurations, there is no harm in including these for non-SMP builds either. Fixes: 61866523ed6e ("clk: tegra30: Use Tegra CPU powergate helper function") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-14clk: tegra: Fix maximum audio sync clock for Tegra124/210Jon Hunter
The maximum frequency supported for I2S on Tegra124 and Tegra210 is 24.576MHz (as stated in the Tegra TK1 data sheet for Tegra124 and the Jetson TX1 module data sheet for Tegra210). However, the maximum I2S frequency is limited to 24MHz because that is the maximum frequency of the audio sync clock. Increase the maximum audio sync clock frequency to 24.576MHz for Tegra124 and Tegra210 in order to support 24.576MHz for I2S. Update the tegra_clk_register_sync_source() function so that it does not set the initial rate for the sync clocks and use the clock init tables to set the initial rate instead. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-14clk: tegra: get rid of duplicate definesMarcel Ziswiler
Get rid of 3 duplicate defines. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-14Merge branch 'clk-qcom-sdm845-lpass' into clk-nextStephen Boyd
- Qualcomm SDM845 audio subsystem clks * clk-qcom-sdm845-lpass: clk: qcom: Add lpass clock controller driver for SDM845 dt-bindings: clock: Introduce QCOM LPASS clock bindings dt-bindings: clock: Update GCC bindings for protected-clocks
2018-12-14Merge branches 'clk-qcom-kconfig', 'clk-qcom-gpucc', 'clk-qcom-qcs404-rpm', ↵Stephen Boyd
'clk-qcom-spi' and 'clk-qcom-videocc-binding' into clk-next - Qualcomm SDM845 GPU clock controllers - Qualcomm QCS404 RPM clk support * clk-qcom-kconfig: clk: qcom: Move to menuconfig and reduce lines * clk-qcom-gpucc: dt-bindings: clock: qcom: Fix the xo parent in gpucc example clk: qcom: gpu_cc_gmu_clk_src has 5 parents, not 6 clk: qcom: Add a dummy enable function for GX gdsc clk: qcom: gdsc: Don't override existing gdsc pd functions clk: qcom: Add graphics clock controller driver for SDM845 dt-bindings: clock: Introduce QCOM Graphics clock bindings * clk-qcom-qcs404-rpm: clk: qcom: smd: Add support for QCS404 rpm clocks * clk-qcom-spi: clk: qcom: msm8916: Additional clock rates for spi * clk-qcom-videocc-binding: dt-bindings: clock: Require #reset-cells in sdm845-videocc
2018-12-14Merge branches 'clk-qoriq-t1023', 'clk-protected-binding', ↵Stephen Boyd
'clk-define-show-macro' and 'clk-static' into clk-next - NXP QorIQ T1023 SoC support - Introduce a 'protected-clocks' binding for firmware protected clks - Shrink code some with DEFINE_SHOW_ATTRIBUTE() * clk-qoriq-t1023: clk: qoriq: add more chips support * clk-protected-binding: clk: qcom: Support 'protected-clocks' property dt-bindings: clk: Introduce 'protected-clocks' property * clk-define-show-macro: clk: tegra: Change to use DEFINE_SHOW_ATTRIBUTE macro clk: nomadik: Change to use DEFINE_SHOW_ATTRIBUTE macro * clk-static: clk: stm32mp1: drop pointless static qualifier in stm32_register_hw_clk()
2018-12-14Merge branches 'clk-bcm-module-license', 'clk-boston-leak' and ↵Stephen Boyd
'clk-mtk-mt7629' into clk-next - Mediatek MT7629 SoC clk controllers * clk-bcm-module-license: clk: bcm2835: make license text and module license match * clk-boston-leak: clk: boston: unregister clks on failure in clk_boston_setup() clk: boston: fix possible memory leak in clk_boston_setup() * clk-mtk-mt7629: clk: mediatek: fix the PCIe MAC clock parent clk: mediatek: Drop more __init markings for driver probe clk: mediatek: Drop __init from mtk_clk_register_cpumuxes() dt-bindings: arm: mediatek: document clk bindings for MT7629 clk: mediatek: add clock support for MT7629 SoC
2018-12-14clk: imx: add imx8qxp lpcg driverAisheng Dong
Add imx8qxp lpcg driver support Cc: Stephen Boyd <sboyd@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-14clk: imx: add lpcg clock supportAisheng Dong
The Low-Power Clock Gate (LPCG) modules contain a local programming model to control the clock gates for the peripherals. An LPCG module is used to locally gate the clocks for the associated peripheral. And they're bedind the SCU clock. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-14clk: imx: add imx8qxp clk driverAisheng Dong
Add imx8qxp clk driver which is based on SCU firmware clock service. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> [sboyd@kernel.org: Move the makefile rule higher in the file] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-14clk: imx: Make the i.MX8MQ CCM clock driver CLK_IMX8MQ dependantAbel Vesa
Remove the dependency between the i.MX8MQ CCM clock driver and the CONFIG_SOC_IMX8MQ and use CONFIG_CLK_IMX8MQ instead. CONFIG_CLK_IMX8MQ depends on ARCH_MXC && ARM64. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-13clk: imx: add scu clock common partAisheng Dong
Add SCU clock common part which will be used by client clock drivers. SCU clocks are totally different from the legacy clocks (No much legacy things can be reused), it's using a firmware interface now based on SCU protocol. So a new configuration option CONFIG_MXC_CLK_SCU is added. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> [sboyd@kernel.org: Mark ccm_ipc_handle static] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-13clk: imx: add configuration option for mmio clksAisheng Dong
The patch introduces CONFIG_MXC_CLK option for legacy MMIO clocks, this is required to compile legacy MMIO clock conditionally when adding SCU based clocks for MX8 platforms later. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-13Merge tag 'meson-clk-4.21-2' of https://github.com/BayLibre/clk-meson into ↵Stephen Boyd
clk-meson Pull more meson clk driver updates from Neil Armstrong: - Fix GXL HDMI Pll fractional bits (from first round) - Add the Meson8/Meson8b video clocks - Add clk-input helper and use it for axg-audio clock driver * tag 'meson-clk-4.21-2' of https://github.com/BayLibre/clk-meson: clk: meson: axg-audio: use the clk input helper function clk: meson: add clk-input helper function clk: meson: meson8b: add the read-only video clock trees clk: meson: meson8b: add the fractional divider for vid_pll_dco clk: meson: meson8b: fix the offset of vid_pll_dco's N value clk: meson: Fix GXL HDMI PLL fractional bits width
2018-12-11clk: qcom: Add missing msm8998 resetsJeffrey Hugo
commit c0cb7c7e7164 ("clk: qcom: Enumerate remaining msm8998 resets") missed two USB2 resets. Add them. Fixes: c0cb7c7e7164 ("clk: qcom: Enumerate remaining msm8998 resets") Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-11clk: Tag basic clk types with SPDXStephen Boyd
These are all GPL-2.0 files per the existing license text. Replace the boiler plate with the tag. Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-11clk: Tag clk core files with SPDXStephen Boyd
These are all GPL-2.0 files per the existing license text. Replace the boiler plate with the tag. Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-11clk: meson: axg-audio: use the clk input helper functionJerome Brunet
Rework the axg audio clock controller to use the new clk-input helper function. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed pclk input clock name to axg_audio_pclk] Link: http://lkml.kernel.org/r/20181204165819.21541-3-jbrunet@baylibre.com
2018-12-10clk: Loongson1: Remove usage of CLK_IS_BASICStephen Boyd
This flag doesn't look to be used by any code, just set in the clk init structure and then never tested again. Remove it from this driver as it doesn't provide any benefit. Also remove parenthesis nearby that are not needed and include clk.h to fix a sparse warning about static function definition. Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10clk: samsung: s3c2410: Remove usage of CLK_IS_BASICStephen Boyd
This flag doesn't look to be used by any code, just set in the clk init structure and then never tested again. Remove it from this drivers as it doesn't provide any benefit. Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10clk: versatile: sp810: Remove usage of CLK_IS_BASICStephen Boyd
This flag doesn't look to be used by any code, just set in the clk init structure and then never tested again. Remove it from this driver as it doesn't provide any benefit. Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10clk: hisilicon: Remove usage of CLK_IS_BASICStephen Boyd
This flag doesn't look to be used by any code, just set in various clk init structures and then never tested again. Remove it from these drivers as it doesn't provide any benefit. Cc: Jiancheng Xue <xuejiancheng@hisilicon.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Jianguo Sun <sunjianguo1@huawei.com> Cc: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10clk: h8300: Remove usage of CLK_IS_BASICStephen Boyd
This flag doesn't look to be used by any code, just set in various clk init structures and then never tested again. Remove it from these drivers as it doesn't provide any benefit. Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: <uclinux-h8-devel@lists.sourceforge.jp> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10clk: axm5516: Remove usage of CLK_IS_BASICStephen Boyd
This flag doesn't look to be used by any code, just set in various clk init structures and then never tested again. Remove it from these drivers as it doesn't provide any benefit. Cc: Anders Berg <anders.berg@lsi.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10clk: st: Remove usage of CLK_IS_BASICStephen Boyd
This flag doesn't look to be used by any code, just set in various clk init structures and then never tested again. Remove it from these drivers as it doesn't provide any benefit. Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10clk: renesas: Remove usage of CLK_IS_BASICStephen Boyd
This flag doesn't look to be used by any code, just set in various clk init structures and then never tested again. Remove it from these drivers as it doesn't provide any benefit. Cc: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: <linux-renesas-soc@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10clk: bd718x7: Initial support for ROHM bd71837/bd71847 PMIC clockMatti Vaittinen
ROHM bd71837 and bd71847 contain 32768Hz clock gate. Support the clock using generic clock framework. Note, only bd71837 is tested but bd71847 should be identical what comes to clk parts. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10clk: qcom: Move to menuconfig and reduce linesStephen Boyd
We duplicate the 'depends on' in almost every Kconfig here, and it's getting out of hand now that we have tens of options for various SoC drivers here. Let's clean it up a little by making a menuconfig for a submenu and adding an if wrapper around the driver section. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10clk: imx6q: handle ENET PLL bypassLucas Stach
The ENET PLL is different from the other i.MX6 PLLs, as it has multiple outputs with different post-dividers, which are all bypassed if the single bypass bit is activated. The hardware setup looks something like this: _ refclk-o---PLL---o----DIV1-----| \ | | |M |----OUT1 o-----------------------|_/ | | _ | o----DIV2-----| \ | | |M |----OUT2 o-----------------------|_/ | | _ | `----DIV3-----| \ | |M |----OUT3 `-----------------------|_/ The bypass bit not only bypasses the PLL, but also the attached post-dividers. This would be reasonbly straight forward to model with a single output, or with different bypass bits for each output, but sadly the HW guys decided that it would be good to actuate all 3 muxes with a single bit. So the need to have the PLL bypassed for one of the outputs always affects 2 other (in our model) independent branches of the clock tree. This means the decision to bypass this PLL is a system wide design choice and should not be changed on-the-fly, so we can treat any bapass configuration as static. As such we can just register the post-dividiers with a ratio that reflects the bypass status, which allows us to bypass the PLL without breaking our abstraction model and with it DT stability. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10clk: imx6q: optionally get CCM inputs via standard clock handlesLucas Stach
When specifying external clock inputs to the CCM the current code requires the clocks to be in a "clocks" child node of the DT root. This is not really conformant with DT best practices. To avoid the need to deviate from those best practices, allow the clock inputs to be specified via standard clock handles. This is in line with how drivers of the later CCM driver revisions on newer i.MX SoCs handle this. As we can't retroactively change the DT binding, allow this as an option with a fallback to the old way of how this has been handled. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10clk: imx6q: reset exclusive gates on initLucas Stach
The exclusive gates may be set up in the wrong way by software running before the clock driver comes up. In that case the exclusive setup is locked in its initial state, as the complementary function can't be activated without disabling the initial setup first. To avoid this lock situation, reset the exclusive gates to the off state and allow the kernel to provide the proper setup. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Dong Aisheng <Aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10clk: imx6q: add DCICx clocks gateAnson Huang
On i.MX6QP/i.MX6Q/i.MX6DL, there are DCIC1/DCIC2 clocks gate in CCM_CCGR0 register, add them into clock tree for clock management. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10clk: imx6sl: ensure MMDC CH0 handshake is bypassedAnson Huang
Same as other i.MX6 SoCs, ensure unused MMDC channel's handshake is bypassed, this is to make sure no request signal will be generated when periphe_clk_sel is changed or SRC warm reset is triggered. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10clk: qcom: qcs404: Fix gpll0_out_main parentSrinivas Kandagatla
gpll0_out_main parent is cxo so fix it. Fixes: 652f1813c113 ("clk: qcom: gcc: Add global clock controller driver for QCS404") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10clk: sunxi-ng: a64: Allow parent change for VE clockJernej Skrabec
Cedrus driver wants to set VE clock higher than it's possible without changing parent rate. Allow changing parent rate for VE clock, so clock rate can be set freely. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10clk: imx: remove redundant initialization of ret to zeroColin Ian King
The initialization of ret is redundant as it is being re-assigned to the return value from the call to imx8m_clk_composite_compute_dividers. Clean this up by removing the initialization. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-07Merge tag 'clk-renesas-for-v4.21-tag2' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas Pull Renesas clk driver updates from Geert Uytterhoeven: - Add support for CPEX (timer) clocks on various R-Car Gen3 and RZ/G2 SoCs - Add support for SDHI HS400 clocks on early revisions of R-Car H3 and M3-W - Miscellaneous fixes based on the Hardware Manual Errata * tag 'clk-renesas-for-v4.21-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: renesas: rcar-gen3: Add HS400 quirk for SD clock clk: renesas: rcar-gen3: Add documentation for SD clocks clk: renesas: rcar-gen3: Set state when registering SD clocks clk: renesas: r8a77995: Simplify PLL3 multiplier/divider clk: renesas: r8a77995: Add missing CPEX clock clk: renesas: r8a77995: Remove non-existent SSP clocks clk: renesas: r8a77995: Remove non-existent VIN5-7 module clocks clk: renesas: r8a77995: Correct parent clock of DU clk: renesas: r8a77990: Correct parent clock of DU clk: renesas: r8a77970: Add CPEX clock clk: renesas: r8a77965: Add CPEX clock clk: renesas: r8a7796: Add CPEX clock clk: renesas: r8a7795: Add CPEX clock clk: renesas: r8a774a1: Add CPEX clock dt-bindings: clock: r8a7796: Remove CSIREF clock dt-bindings: clock: r8a7795: Remove CSIREF clock
2018-12-07clk: renesas: rcar-gen3: Add HS400 quirk for SD clockNiklas Söderlund
On H3 (ES1.x, ES2.0) and M3-W (ES1.0, ES1.1) the clock setting for HS400 needs a quirk to function properly. The reason for the quirk is that there are two settings which produces same divider value for the SDn clock. On the effected boards the one currently selected results in HS400 not working. This change uses the same method as the Gen2 CPG driver and simply ignores the first clock setting as this is the offending one when selecting the settings. Which of the two possible settings is used have no effect for SDR104. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-12-07clk: renesas: rcar-gen3: Add documentation for SD clocksNiklas Söderlund
Document the known use cases of the different clock settings. This is useful as different SoC and ES versions use different settings to do the same thing as there is more than one combination to achieve the same SDn clock speed. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-12-07clk: renesas: rcar-gen3: Set state when registering SD clocksNiklas Söderlund
The driver tries to figure out which state a SD clock is in when the clock is registered, instead of setting a known state. This can be problematic for two reasons. 1. If the clock driver can't figure out the state of the clock, registration of the clock fails, and setting of a known state by a clock user is not possible. 2. The state of the clock depends on if and how the bootloader configured it. The driver only checks that the rate is known, not if the clock is stopped or not for example. Fix this by setting a known state and making sure the clock is stopped. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-12-05clk: qcom: gcc-msm8998: Add clkref clocksBjorn Andersson
Add clkref clocks for usb3, hdmi, ufs, pcie, and usb2. They are all sourced off CXO_IN, so parent them off "xo" until a proper link to the rpmcc can be described in DT. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 15:04:15 +0000