summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-05-03gma500: implement backlight functionality for Cedartrail devicesAlan Cox
Basically a straight cut/paste from the reference driver code then cleaned up a spot. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03gma500: wide framebuffer memoryAlan Cox
If we set a small text framebuffer and have a bigger scanout then we want to send black not random bits for the overscan. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03gma500: Sync up Oaktrail HDMIAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03gma500: don't register the ACPI video busAlan Cox
We are not yet ready for this and it makes a mess on some devices. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03gma500: mdfld_dsi_dpi_mode_set() do not corrupt DSPSTRIDEKirill A. Shutemov
The proper stride value set in mdfld__intel_pipe_set_base(). TODO: move tc35876x support to separate driver and get rid of all if (mdfld_get_panel_type(dev, pipe) == TC35876X) { ... } Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03drm/radeon: add connector table for SAM440ep embedded boardAlex Deucher
RV250 found on ppc embedded boards. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03drm/radeon: avoid leaking const ib (not used yet on si and newer GPU)Jerome Glisse
Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03drm/radeon: Original Radeons had PCI GART, not PCIe GART.Michel Dänzer
Just a cosmetic fix to make dmesg a little less confusing. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03drm/radeon: remove cayman_gpu_is_lockupChristian König
Since it is now identical to evergreen_gpu_is_lockup. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03drm/radeon: remove r300_gpu_is_lockupChristian König
Since it is now identical to r100_gpu_is_lockup. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03drm/radeon: make forcing ring activity a common functionChristian König
Nothing chipset or ring specific with it, so also move it to radon_ring. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03drm/radeon: unlock the ring mutex while waiting for the next fenceChristian König
Fixing just another deadlock problem with gpu reset tests. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03drm/radeon: make lockup timeout a module paramChristian König
Don't hard code the 10 seconds timeout. Compute jobs can run much longer. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03drm/radeon: move lockup detection code into radeon_ring.cChristian König
It isn't chipset specific, so it makes no sense to have that inside r100.c. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03drm/radeon: rework recursive gpu reset handlingChristian König
Instead of all this humpy pumpy with recursive mutex (which also fixes only halve of the problem) move the actual gpu reset out of the fence code, return -EDEADLK and then reset the gpu in the calling ioctl function. v2: Split removal of radeon_mutex into separate patch. Return -EAGAIN if reset is successful. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03drm/radeon: fix a bug with the ring syncing codeChristian König
Rings need to lock in order, otherwise the ring subsystem can deadlock. v2: fix error handling and number of locked doublewords. v3: stop creating unneeded semaphores. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03drm/radeon: don't keep list of created fences.Christian König
It's never used and so practically superfluous. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03drm/radeon: rename fence_wait_last to fence_wait_emptyChristian König
As discussed with Michel that name better describes the behavior of this function. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03drm/radeon: return -ENOENT in fence_wait_next v2Christian König
We should signal the caller that we haven't waited at all. v2: only change fence_wait_next not fence_wait_last. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03drm/radeon: fix a bug in the SA codeChristian König
Aligning offset can make it bigger than tmp->offset leading to an overrun bug in the following subtraction. v2: Against initial suspicions this can't happen in mainline, so no need to push it into stable. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03drm/radeon: rework gpu lockup detection and processingChristian König
Previusly multiple rings could trigger multiple GPU resets at the same time. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03drm/radeon: use central function for IB testingChristian König
Removing all the different error messages and having just one standard behaviour over all chipset generations. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03drm/radeon: register ring debugfs handlers on initChristian König
Just register the debugfs files on init instead of checking the chipset type multiple times. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03drm/radeon: replace gpu_lockup with ring->ready flagChristian König
It makes no sense at all to have more than one flag. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03drm/radeon: make radeon_gpu_is_lockup a per ring functionChristian König
Different rings have different criteria to test if they are stuck. v2: rebased on current drm-next Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-03cdv: Fix typos in initialization of mdfld_chip_opsPatrik Jakobsson
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-02drm/kms: reduce some messages to debug level (v2)Dave Airlie
These can all be trigged from userspace if you pass the right values. v2: rebase on later kernel. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-02Merge tag 'drm-intel-next-2012-04-23' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-core-next Daniel Vetter writes: A new drm-intel-next pull. Highlights: - More gmbus patches from Daniel Kurtz, I think gmbus is now ready, all known issues fixed. - Fencing cleanup and pipelined fencing removal from Chris. - rc6 residency interface from Ben, useful for powertop. - Cleanups and code reorg around the ringbuffer code (Ben&me). - Use hw semaphores in the pageflip code from Ben. - More vlv stuff from Jesse, unfortunately his vlv cpu is doa, so less merged than I've hoped for - we still have the unused function warning :( - More hsw patches from Eugeni, again, not yet enabled fully. - intel_pm.c refactoring from Eugeni. - Ironlake sprite support from Chris. - And various smaller improvements/fixes all over the place. Note that this pull request also contains a backmerge of -rc3 to sort out a few things in -next. I've also had to frob the shortlog a bit to exclude anything that -rc3 brings in with this pull. Regression wise we have a few strange bugs going on, but for all of them closer inspection revealed that they've been pre-existing, just now slightly more likely to be hit. And for most of them we have a patch already. Otherwise QA has not reported any regressions, and I'm also not aware of anything bad happening in 3.4. * tag 'drm-intel-next-2012-04-23' of git://people.freedesktop.org/~danvet/drm-intel: (420 commits) drm/i915: rc6 residency (fix the fix) drm/i915/tv: fix open-coded ARRAY_SIZE. drm/i915: invalidate render cache on gen2 drm/i915: Silence the change of LVDS sync polarity drm/i915: add generic power management initialization drm/i915: move clock gating functionality into intel_pm module drm/i915: move emon functionality into intel_pm module drm/i915: move drps, rps and rc6-related functions to intel_pm drm/i915: fix line breaks in intel_pm drm/i915: move watermarks settings into intel_pm module drm/i915: move fbc-related functionality into intel_pm module drm/i915: Refactor get_fence() to use the common fence writing routine drm/i915: Refactor fence clearing to use the common fence writing routine drm/i915: Refactor put_fence() to use the common fence writing routine drm/i915: Prepare to consolidate fence writing drm/i915: Remove the unsightly "optimisation" from flush_fence() drm/i915: Simplify fence finding drm/i915: Discard the unused obj->last_fenced_ring drm/i915: Remove unused ring->setup_seqno drm/i915: Remove fence pipelining ...
2012-05-01drm/radeon/kms/hdmi: use relative offsets, official regsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-01drm/radeon/kms: keep HDMI state in separated variableRafał Miłecki
If we want hdmi_offset to be relative to the first block, zero value can be used also for enabled block. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-01drm/radeon/kms: get rid of r600_hdmi_find_free_blockRafał Miłecki
R6xx has routable blocks, but there's nothing wrong in assignment based on dig_encoder. We didn't really need that algorithm. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-01drm/radeon/kms: get rid of hdmi_config_offsetRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-01drm/radeon/kms: move audio params to separated structRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-30drm/edid: fix collision between two patches breaking buildDave Airlie
this fixes a report that the new load code needed to be updated for ajax's validity changes. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-27gma500: Set the mapping maskAlan Cox
Some boards such as the Intel D2700MUD allow you to have over 4GB of RAM. The GTT on the PVR based devices is 32bit however. Hugh Dickins points out that we should therefore be setting the mapping gfp mask. This is not the whole fix for the problem. Some further shmem patches will be needed to deal with the corner cases. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-27gma500: Add the base elements of CDV hotplug supportAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-27gma500: Add ops for hotplug support.Alan Cox
This provides the needed callback hooks to add hotplug display support to the GMA36x0 devices. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-27cdv: continue synching up with updated reference codeAlan Cox
In particular clean up the errata handling and correct the crtc masks. We do this a bit differently using our device abstraction for neatness. This doesn't address the ACPI opregion and hotplug plumbing, nor the IRQ related changes that will need. It touches on backlight init but the full backlight support is not in this change set. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-27gma500: Clean up weirdness in the cdv mode test codeAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-27gma500: support 1080pAlan Cox
The problem in console mode is lack of linear memory. We can solve that by dropping to 16bpp. The mode setting X server will allocate its own GEM framebuffer in 32bpp and all will be well. We could just do 16bpp anyway but that would be a regression on the lower modes as many distributions don't yet ship the generic mode setting KMS drivers. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-27gma500: panel presence checkAlan Cox
Introduce a panel presence check for Cedartrail. Non netbook devices don't necessarily have a panel attached. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-27gma500: intel_bios updatesAlan Cox
Pull in various i915 bits that we will need to begin tackling the LVDS detect and ACPI events. We try and drift towards the i915 version of the code with the long term goal that at least some of it can one day be unified. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-27gma500: mark framebuffer pages write combiningAlan Cox
We don't want them uncached, combining will do nicely and fixes the performance problem with the generic modesetting X server. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-27gma500: Update the Cedarview clock handlingAlan Cox
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-27gma500: read the PLL bitsAlan Cox
We need to pull more stuff from the VBT in order to configure the clocking correctly in all cases. Add the relevant bits from the other CDV driver work. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-27gma500: Fix leak of uncached pageAlan Cox
This was reported a long time ago (and I apologize to whoever it was that reported it as I've lost the original report). Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-27drm: Store vendor IDs directly in the EDID quirk structureIan Pilcher
EDID vendor IDs are always 3 characters long (4 with the terminating 0). It doesn't make any sense to have a (possibly 8-byte) pointer to the ID string in the quirk structure. Signed-off-by: Ian Pilcher <arequipeno@gmail.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-27drm/edid: Try harder to fix up base EDID blocksAdam Jackson
Requiring the first byte of the EDID base block header to be 0 means we don't fix up as many transfer errors as we could. Instead have the callers specify whether it's meant to be block 0 or not, and conditionally run header fixup based on that. Bugzilla: https://bugzilla.redhat.com/812890 Signed-off-by: Adam Jackson <ajax@redhat.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-24vga: fix build when fbdev is a moduleMatthew Garrett
This fixes the build breakage reported by Stephen in -next when merging the drm-next tree. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-24drm: Unify and fix idr error handlingVille Syrjälä
The error handling code w.r.t. idr usage looks inconsistent. In the case of drm_mode_object_get() and drm_ctxbitmap_next() the error handling is also incomplete. Unify the code to follow the same pattern always. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-10 15:31:08 +0000