summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-04-30tty: Replace TTY_THROTTLED bit tests with tty_throttled()Peter Hurley
Abstract TTY_THROTTLED bit tests with tty_throttled(). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30tty: Replace TTY_IO_ERROR bit tests with tty_io_error()Peter Hurley
Abstract TTY_IO_ERROR status test treewide with tty_io_error(). NB: tty->flags uses atomic bit ops; replace non-atomic bit test with test_bit(). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30tty: amba-pl011: Use 32-bit accesses for SBSA UARTChristopher Covington
Version 2 of the Server Base System Architecture (SBSAv2) describes UART hardware registers as 32 bits wide, giving no guidance on access sizes. The SBSA UART driver previously assumed partial-length 16 and 8 bit accesses would work. But the SBSAv2 UART hardware on the Qualcomm Technologies QDF2432 only supports full-length 32 bit register accesses, so use those exclusively. This is compatible with SBSAv3, which explicitly requires UART hardware support 32 (and 16 and sometimes 8) bit accesses. Tested on Juno, Midway, QDF2432, Seattle, and X-Gene 1. Tested-by: Mark Langsdorf <mlangsdo@redhat.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-28tty/serial: atmel: fix hardware handshake selectionAlexandre Belloni
Commit 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when hardware handshake is enabled") actually allowed to enable hardware handshaking. Before, the CRTSCTS flags was silently ignored. As the DMA controller can't drive RTS (as explain in the commit message). Ensure that hardware flow control stays disabled when DMA is used and FIFOs are not available. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Fixes: 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when hardware handshake is enabled") Cc: stable <stable@vger.kernel.org> # v4.0+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-28TTY: n_gsm, fix false positive WARN_ONJiri Slaby
Dmitry reported, that the current cleanup code in n_gsm can trigger a warning: WARNING: CPU: 2 PID: 24238 at drivers/tty/n_gsm.c:2048 gsm_cleanup_mux+0x166/0x6b0() ... Call Trace: ... [<ffffffff81247ab9>] warn_slowpath_null+0x29/0x30 kernel/panic.c:490 [<ffffffff828d0456>] gsm_cleanup_mux+0x166/0x6b0 drivers/tty/n_gsm.c:2048 [<ffffffff828d4d87>] gsmld_open+0x5b7/0x7a0 drivers/tty/n_gsm.c:2386 [<ffffffff828b9078>] tty_ldisc_open.isra.2+0x78/0xd0 drivers/tty/tty_ldisc.c:447 [<ffffffff828b973a>] tty_set_ldisc+0x1ca/0xa70 drivers/tty/tty_ldisc.c:567 [< inline >] tiocsetd drivers/tty/tty_io.c:2650 [<ffffffff828a14ea>] tty_ioctl+0xb2a/0x2140 drivers/tty/tty_io.c:2883 ... But this is a legal path when open fails to find a space in the gsm_mux array and tries to clean up. So make it a standard test instead of a warning. Reported-by: "Dmitry Vyukov" <dvyukov@google.com> Cc: Alan Cox <alan@linux.intel.com> Link: http://lkml.kernel.org/r/CACT4Y+bHQbAB68VFi7Romcs-Z9ZW3kQRvcq+BvHH1oa5NcAdLA@mail.gmail.com Fixes: 5a640967 ("tty/n_gsm.c: fix a memory leak in gsmld_open()") Cc: stable <stable@vger.kernel.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-28serial: 8250_pci: fix divide error bug if baud rate is 0David Müller
Since commit 21947ba654a6 ("serial: 8250_pci: replace switch-case by formula"), the 8250 driver crashes in the byt_set_termios() function with a divide error. This is caused by the fact that a baud rate of 0 (B0) is not handled properly. Fix it by falling back to B9600 in this case. Signed-off-by: David Müller <d.mueller@elsoft.ch> Fixes: 21947ba654a6 ("serial: 8250_pci: replace switch-case by formula") Cc: stable@vger.kernel.org Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-23Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal fixes from Eduardo Valentin: "Specifics in this pull request: - Fixes in mediatek and OF thermal drivers - Fixes in power_allocator governor - More fixes of unsigned to int type change in thermal_core.c. These change have been CI tested using KernelCI bot. \o/" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: fix Mediatek thermal controller build thermal: consistently use int for trip temp thermal: fix mtk_thermal build dependency thermal: minor mtk_thermal.c cleanups thermal: power_allocator: req_range multiplication should be a 64 bit type thermal: of: add __init attribute
2016-04-23Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: two EDAC driver fixes, a Xen crash fix, a HyperV log spam fix and a documentation fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86 EDAC, sb_edac.c: Take account of channel hashing when needed x86 EDAC, sb_edac.c: Repair damage introduced when "fixing" channel address x86/mm/xen: Suppress hugetlbfs in PV guests x86/doc: Correct limits in Documentation/x86/x86_64/mm.txt x86/hyperv: Avoid reporting bogus NMI status for Gen2 instances
2016-04-23Merge branches 'perf-urgent-for-linus', 'smp-urgent-for-linus' and ↵Linus Torvalds
'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf, cpu hotplug and timer fixes from Ingo Molnar: "perf: - A single tooling fix for a user-triggerable segfault. CPU hotplug: - Fix a CPU hotplug corner case regression, introduced by the recent hotplug rework timers: - Fix a boot hang in the ARM based Tango SoC clocksource driver" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf intel-pt: Fix segfault tracing transactions * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Fix rollback during error-out in __cpu_disable() * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/tango-xtal: Fix boot hang due to incorrect test
2016-04-23Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: "A core irq affinity masks related fix and a MIPS irqchip driver fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/mips-gic: Don't overrun pcpu_masks array genirq: Dont allow affinity mask to be updated on IPIs
2016-04-23Merge tag 'usb-4.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / PHY driver fixes from Greg KH: "Here are two small sets of patches, both from subsystem trees, USB gadget and PHY drivers. Full details are in the shortlog, and they have all been in linux-next for a while (before I merged them to the USB tree)" * tag 'usb-4.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: f_fs: Fix use-after-free usb: dwc3: gadget: Fix suspend/resume during device mode usb: dwc3: fix memory leak of dwc->regset usb: dwc3: core: fix PHY handling during suspend usb: dwc3: omap: fix up error path on probe() usb: gadget: composite: Clear reserved fields of SSP Dev Cap phy: rockchip-emmc: adapt binding to specifiy register offset and length phy: rockchip-emmc: should be a child device of the GRF phy: rockchip-dp: should be a child device of the GRF
2016-04-23Merge tag 'tty-4.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial fixes from Greg KH: "Here are 3 serial driver fixes for issues that have been reported. Two are reverts, fixing problems that were in the big TTY/Serial driver merge in 4.6-rc1, and the last one is a simple bugfix for a regression that showed up in 4.6-rc1 as well. All have been in linux-next with no reported issues" * tag 'tty-4.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: 8250: Add hardware dependency to RT288X option" tty/serial/8250: fix RS485 half-duplex RX Revert "serial-uartlite: Constify uartlite_be/uartlite_le"
2016-04-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: "Just minor driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: twl4030-vibra - do not reparent to grandparent Input: twl6040-vibra - do not reparent to grandparent Input: twl6040-vibra - ignore return value of schedule_work Input: twl6040-vibra - fix NULL pointer dereference by removing workqueue Input: pmic8xxx-pwrkey - fix algorithm for converting trigger delay Input: arizona-haptic - don't assign input_dev parent Input: clarify we want BTN_TOOL_<name> on proximity Input: xpad - add Mad Catz FightStick TE 2 VID/PID Input: gtco - fix crash on detecting device without endpoints
2016-04-22Merge tag 'pinctrl-v4.6-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Some pin control driver fixes came in. One headed for stable and the other two are just ordinary merge window fixes. - Make the i.MX driver select REGMAP as a dependency - Fix up the Mediatek debounce time unit - Fix a real hairy ffs vs __ffs issue in the Single pinctrl driver" * tag 'pinctrl-v4.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: single: Fix pcs_parse_bits_in_pinctrl_entry to use __ffs than ffs pinctrl: mediatek: correct debounce time unit in mtk_gpio_set_debounce pinctrl: imx: Kconfig: PINCTRL_IMX select REGMAP
2016-04-22Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Cache invalidation fix for early CPU boot status update (incorrect cacheline) - of_put_node() missing in the spin_table code - EL1/El2 early init inconsistency when Virtualisation Host Extensions are present - RCU warning fix in the arm_pmu.c driver * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Fix EL1/EL2 early init inconsistencies with VHE drivers/perf: arm-pmu: fix RCU usage on pmu resume from low-power arm64: spin-table: add missing of_node_put() arm64: fix invalidation of wrong __early_cpu_boot_status cacheline
2016-04-22Merge tag 'iommu-fixes-v4.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: "The fixes include: - Two patches to revert the use of default domains in the ARM SMMU driver. Enabling this caused regressions which need more thorough fixing. So the regressions are fixed for now by disabling the use of default domains. - A fix for a v4.4 regression in the AMD IOMMU driver which broke devices behind invisible PCIe-to-PCI bridges with IOMMU enabled" * tag 'iommu-fixes-v4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/arm-smmu: Don't allocate resources for bypass domains iommu/arm-smmu: Fix stream-match conflict with IOMMU_DOMAIN_DMA iommu/amd: Fix checking of pci dma aliases
2016-04-22Merge tag 'phy-for-4.6-rc' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus Kishon writes: phy: for 4.6-rc *) make rockchip-dp and rockchip-emmc PHY child device of GRF Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-22x86 EDAC, sb_edac.c: Take account of channel hashing when neededTony Luck
Haswell and Broadwell can be configured to hash the channel interleave function using bits [27:12] of the physical address. On those processor models we must check to see if hashing is enabled (bit21 of the HASWELL_HASYSDEFEATURE2 register) and act accordingly. Based on a patch by patrickg <patrickg@supermicro.com> Tested-by: Patrick Geary <patrickg@supermicro.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-edac@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-22x86 EDAC, sb_edac.c: Repair damage introduced when "fixing" channel addressTony Luck
In commit: eb1af3b71f9d ("Fix computation of channel address") I switched the "sck_way" variable from holding the log2 value read from the h/w to instead be the actual number. Unfortunately it is needed in log2 form when used to shift the address. Tested-by: Patrick Geary <patrickg@supermicro.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-edac@vger.kernel.org Cc: stable@vger.kernel.org Fixes: eb1af3b71f9d ("Fix computation of channel address") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-22clocksource/drivers/tango-xtal: Fix boot hang due to incorrect testDaniel Lezcano
Commit 0881841f7e78 introduced a regression by inverting a test check after calling clocksource_mmio_init(). That results on the system to hang at boot time. Fix it by inverting the test again. Fixes: 0881841f7e78 ("Replace code by clocksource_mmio_init") Reported-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-04-22Merge branch 'drm-fixes-4.6' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Misc radeon and amdgpu bug fixes for 4.6. * 'drm-fixes-4.6' of git://people.freedesktop.org/~agd5f/linux: amdgpu/uvd: add uvd fw version for amdgpu drm/amdgpu: forbid mapping of userptr bo through radeon device file drm/radeon: forbid mapping of userptr bo through radeon device file drm/amdgpu: bump the afmt limit for CZ, ST, Polaris drm/amdgpu: use defines for CRTCs and AMFT blocks drm/radeon: print a message if ATPX dGPU power control is missing Revert "drm/radeon: disable runtime pm on PX laptops without dGPU power control" drm/amdgpu/acp: fix resume on CZ systems with AZ audio drm/radeon: add a quirk for a XFX R9 270X drm/radeon: print pci revision as well as pci ids on driver load drm/amdgpu: when suspending, if uvd/vce was running. need to cancel delay work. drm/radeon: fix initial connector audio value
2016-04-22Merge branch 'linux-4.6' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
transform feedback fix. * 'linux-4.6' of git://github.com/skeggsb/linux: drm/nouveau/gr/gf100: select a stream master to fixup tfb offset queries
2016-04-22drm/nouveau/gr/gf100: select a stream master to fixup tfb offset queriesBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2016-04-21amdgpu/uvd: add uvd fw version for amdgpuSonny Jiang
Was previously always hardcoded to 0. Signed-off-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-04-21drm/amdgpu: forbid mapping of userptr bo through radeon device fileJérôme Glisse
Allowing userptr bo which are basicly a list of page from some vma (so either anonymous page or file backed page) would lead to serious corruption of kernel structures and counters (because we overwrite the page->mapping field when mapping buffer). This will already block if the buffer was populated before anyone does try to mmap it because then TTM_PAGE_FLAG_SG would be set in in the ttm_tt flags. But that flag is check before ttm_tt_populate in the ttm vm fault handler. So to be safe just add a check to verify_access() callback. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-04-21drm/radeon: forbid mapping of userptr bo through radeon device fileJérôme Glisse
Allowing userptr bo which are basicly a list of page from some vma (so either anonymous page or file backed page) would lead to serious corruption of kernel structures and counters (because we overwrite the page->mapping field when mapping buffer). This will already block if the buffer was populated before anyone does try to mmap it because then TTM_PAGE_FLAG_SG would be set in in the ttm_tt flags. But that flag is check before ttm_tt_populate in the ttm vm fault handler. So to be safe just add a check to verify_access() callback. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-04-21drm/amdgpu: bump the afmt limit for CZ, ST, PolarisAlex Deucher
Fixes array overflow on these chips. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-04-21drm/amdgpu: use defines for CRTCs and AMFT blocksAlex Deucher
Prerequiste for the next patch which ups the limits. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-04-22drm/dp/mst: Validate port in drm_dp_payload_send_msg()cpaul@redhat.com
With the joys of things running concurrently, there's always a chance that the port we get passed in drm_dp_payload_send_msg() isn't actually valid anymore. Because of this, we need to make sure we validate the reference to the port before we use it otherwise we risk running into various race conditions. For instance, on the Dell MST monitor I have here for testing, hotplugging it enough times causes us to kernel panic: [drm:intel_mst_enable_dp] 1 [drm:drm_dp_update_payload_part2] payload 0 1 [drm:intel_get_hpd_pins] hotplug event received, stat 0x00200000, dig 0x10101011, pins 0x00000020 [drm:intel_hpd_irq_handler] digital hpd port B - short [drm:intel_dp_hpd_pulse] got hpd irq on port B - short [drm:intel_dp_check_mst_status] got esi 00 10 00 [drm:drm_dp_update_payload_part2] payload 1 1 general protection fault: 0000 [#1] SMP … Call Trace: [<ffffffffa012b632>] drm_dp_update_payload_part2+0xc2/0x130 [drm_kms_helper] [<ffffffffa032ef08>] intel_mst_enable_dp+0xf8/0x180 [i915] [<ffffffffa0310dbd>] haswell_crtc_enable+0x3ed/0x8c0 [i915] [<ffffffffa030c84d>] intel_atomic_commit+0x5ad/0x1590 [i915] [<ffffffffa01db877>] ? drm_atomic_set_crtc_for_connector+0x57/0xe0 [drm] [<ffffffffa01dc4e7>] drm_atomic_commit+0x37/0x60 [drm] [<ffffffffa0130a3a>] drm_atomic_helper_set_config+0x7a/0xb0 [drm_kms_helper] [<ffffffffa01cc482>] drm_mode_set_config_internal+0x62/0x100 [drm] [<ffffffffa01d02ad>] drm_mode_setcrtc+0x3cd/0x4e0 [drm] [<ffffffffa01c18e3>] drm_ioctl+0x143/0x510 [drm] [<ffffffffa01cfee0>] ? drm_mode_setplane+0x1b0/0x1b0 [drm] [<ffffffff810f79a7>] ? hrtimer_start_range_ns+0x1b7/0x3a0 [<ffffffff81212962>] do_vfs_ioctl+0x92/0x570 [<ffffffff81590852>] ? __sys_recvmsg+0x42/0x80 [<ffffffff81212eb9>] SyS_ioctl+0x79/0x90 [<ffffffff816b4e32>] entry_SYSCALL_64_fastpath+0x1a/0xa4 RIP [<ffffffffa012b026>] drm_dp_payload_send_msg+0x146/0x1f0 [drm_kms_helper] Which occurs because of the hotplug event shown in the log, which ends up causing DRM's dp helpers to drop the port we're updating the payload on and panic. CC: stable@vger.kernel.org Signed-off-by: Lyude <cpaul@redhat.com> Reviewed-by: David Airlie <airlied@linux.ie> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-22Merge branch 'linux-4.6' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
Single nouveau regression fix * 'linux-4.6' of git://github.com/skeggsb/linux: drm/nouveau/kms: fix setting of default values for dithering properties
2016-04-22drm/nouveau/kms: fix setting of default values for dithering propertiesBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-04-22Merge tag 'drm-intel-fixes-2016-04-21' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes Hi Dave, fixes all around, all but one are cc: stable material, the most important ones are likely the Skylake hang fixes from Mika. * tag 'drm-intel-fixes-2016-04-21' of git://anongit.freedesktop.org/drm-intel: drm/i915: Use fw_domains_put_with_fifo() on HSW drm/i915: Force ringbuffers to not be at offset 0 drm/i915: Adjust size of PIPE_CONTROL used for gen8 render seqno write drm/i915/skl: Fix spurious gpu hang with gt3/gt4 revs drm/i915/skl: Fix rc6 based gpu/system hang drm/i915/userptr: Hold mmref whilst calling get-user-pages drm/i915: Fixup the free space logic in ring_prepare drm/i915/skl+: Use plane size for relative data rate calculation
2016-04-21Merge tag 'rtc-4.6-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fixes from Alexandre Belloni: "A few fixes for the RTC subsystem. The documentation fix already missed 4.5 so I think it is worth taking it now: A documentation fix for s3c and two fixes for the ds1307" * tag 'rtc-4.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: ds1307: Use irq when available for wakeup-source device rtc: ds1307: ds3231 temperature s16 overflow rtc: s3c: Document in binding that only s3c6410 needs a src clk
2016-04-21Merge tag 'pm+acpi-4.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Two fixes for issues introduced recently, one for an intel_pstate driver problem uncovered by the recent switch over from using timers and the other one for a potential cpufreq core problem related to system suspend/resume. Specifics: - Fix an intel_pstate driver problem causing CPUs to get stuck in the highest P-state when completely idle uncovered by the recent switch over from using timers (Rafael Wysocki). - Avoid attempts to get the current CPU frequency when all devices (like I2C controllers that may be nedded for that purpose) have been suspended during system suspend/resume (Rafael Wysocki)" * tag 'pm+acpi-4.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Abort cpufreq_update_current_freq() for cpufreq_suspended set intel_pstate: Avoid getting stuck in high P-states when idle
2016-04-21rtc: ds1307: Use irq when available for wakeup-source deviceNishanth Menon
With commit 8bc2a40730ec ("rtc: ds1307: add support for the DT property 'wakeup-source'") we lost the ability for rtc irq functionality for devices that are actually hooked on a real IRQ line and have capability to wakeup as well. This is not an expected behavior. So, instead of just not requesting IRQ, skip the IRQ requirement only if interrupts are not defined for the device. Fixes: 8bc2a40730ec ("rtc: ds1307: add support for the DT property 'wakeup-source'") Reported-by: Tony Lindgren <tony@atomide.com> Cc: Michael Lange <linuxstuff@milaw.biz> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-04-21rtc: ds1307: ds3231 temperature s16 overflowZhuang Yuyao
while retrieving temperature from ds3231, the result may be overflow since s16 is too small for a multiplication with 250. ie. if temp_buf[0] == 0x2d, the result (s16 temp) will be negative. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Tested-by: Michael Tatarinov <kukabu@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix memory leak in iwlwifi, from Matti Gottlieb. 2) Add missing registration of netfilter arp_tables into initial namespace, from Florian Westphal. 3) Fix potential NULL deref in DecNET routing code. 4) Restrict NETLINK_URELEASE to truly bound sockets only, from Dmitry Ivanov. 5) Fix dst ref counting in VRF, from David Ahern. 6) Fix TSO segmenting limits in i40e driver, from Alexander Duyck. 7) Fix heap leak in PACKET_DIAG_MCLIST, from Mathias Krause. 8) Ravalidate IPV6 datagram socket cached routes properly, particularly with UDP, from Martin KaFai Lau. 9) Fix endian bug in RDS dp_ack_seq handling, from Qing Huang. 10) Fix stats typing in bcmgenet driver, from Eric Dumazet. 11) Openvswitch needs to orphan SKBs before ipv6 fragmentation handing, from Joe Stringer. 12) SPI device reference leak in spi_ks8895 PHY driver, from Mark Brown. 13) atl2 doesn't actually support scatter-gather, so don't advertise the feature. From Ben Hucthings. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits) openvswitch: use flow protocol when recalculating ipv6 checksums Driver: Vmxnet3: set CHECKSUM_UNNECESSARY for IPv6 packets atl2: Disable unimplemented scatter/gather feature net/mlx4_en: Split SW RX dropped counter per RX ring net/mlx4_core: Don't allow to VF change global pause settings net/mlx4_core: Avoid repeated calls to pci enable/disable net/mlx4_core: Implement pci_resume callback net: phy: spi_ks8895: Don't leak references to SPI devices net: ethernet: davinci_emac: Fix platform_data overwrite net: ethernet: davinci_emac: Fix Unbalanced pm_runtime_enable qede: Fix single MTU sized packet from firmware GRO flow qede: Fix setting Skb network header qede: Fix various memory allocation error flows for fastpath tcp: Merge tx_flags and tskey in tcp_shifted_skb tcp: Merge tx_flags and tskey in tcp_collapse_retrans drivers: net: cpsw: fix wrong regs access in cpsw_ndo_open tcp: Fix SOF_TIMESTAMPING_TX_ACK when handling dup acks openvswitch: Orphan skbs before IPv6 defrag Revert "Prevent NUll pointer dereference with two PHYs on cpsw" VSOCK: Only check error on skb_recv_datagram when skb is NULL ...
2016-04-21Driver: Vmxnet3: set CHECKSUM_UNNECESSARY for IPv6 packetsShrikrishna Khare
For IPv6, if the device indicates that the checksum is correct, set CHECKSUM_UNNECESSARY. Reported-by: Subbarao Narahari <snarahari@vmware.com> Signed-off-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: Jin Heo <heoj@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21atl2: Disable unimplemented scatter/gather featureBen Hutchings
atl2 includes NETIF_F_SG in hw_features even though it has no support for non-linear skbs. This bug was originally harmless since the driver does not claim to implement checksum offload and that used to be a requirement for SG. Now that SG and checksum offload are independent features, if you explicitly enable SG *and* use one of the rare protocols that can use SG without checkusm offload, this potentially leaks sensitive information (before you notice that it just isn't working). Therefore this obscure bug has been designated CVE-2016-2117. Reported-by: Justin Yackoski <jyackoski@crypto-nite.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Fixes: ec5f06156423 ("net: Kill link between CSUM and SG features.") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21irqchip/mips-gic: Don't overrun pcpu_masks arrayPaul Burton
Commit 2a0787051182 ("irqchip/mips-gic: Use gic_vpes instead of NR_CPUS") & commit 78930f09b940 ("irqchip/mips-gic: Clear percpu_masks correctly when mapping") both introduce code which accesses gic_vpes entries in the pcpu_masks array. However, this array has length NR_CPUS. If NR_CPUS is less than gic_vpes (ie. the kernel supports use of less CPUs than are present in the system) then we overrun the array, clobber some other data & generally die pretty promptly. Most notably this affects uniprocessor kernels running on any multicore or multithreaded Malta with a GIC (ie. the vast majority of real Malta boards). Fix this by only accessing up to min(gic_vpes, NR_CPUS) entries in the pcpu_masks array, preventing the array overrun. Fixes: 2a0787051182 ("irqchip/mips-gic: Use gic_vpes instead of NR_CPUS") Fixes: 78930f09b940 ("irqchip/mips-gic: Clear percpu_masks correctly when mapping") Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Link: http://lkml.kernel.org/r/1461234714-9975-1-git-send-email-paul.burton@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-04-21net/mlx4_en: Split SW RX dropped counter per RX ringEran Ben Elisha
Count SW packet drops per RX ring instead of a global counter. This will allow monitoring the number of rx drops per ring. In addition, SW rx_dropped counter was overwritten by HW rx_dropped counter, sum both of them instead to show the accurate value. Fixes: a3333b35da16 ('net/mlx4_en: Moderate ethtool callback to [...] ') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reported-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx4_core: Don't allow to VF change global pause settingsEugenia Emantayev
Currently changing global pause settings is done via SET_PORT command with input modifier GENERAL. This command is allowed for each VF since MTU setting is done via the same command. Change the above to the following scheme: before passing the request to the FW, the PF will check whether it was issued by a slave. If yes, don't change global pause and warn, otherwise change to the requested value and store for further reference. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx4_core: Avoid repeated calls to pci enable/disableDaniel Jurgens
Maintain the PCI status and provide wrappers for enabling and disabling the PCI device. Performing the actions more than once without doing its opposite results in warning logs. This occurred when EEH hotplugged the device causing a warning for disabling an already disabled device. Fixes: 2ba5fbd62b25 ('net/mlx4_core: Handle AER flow properly') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx4_core: Implement pci_resume callbackDaniel Jurgens
Move resume related activities to a new pci_resume function instead of performing them in mlx4_pci_slot_reset. This change is needed to avoid a hotplug during EEH recovery due to commit f2da4ccf8bd4 ("powerpc/eeh: More relaxed hotplug criterion"). Fixes: 2ba5fbd62b25 ('net/mlx4_core: Handle AER flow properly') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net: phy: spi_ks8895: Don't leak references to SPI devicesMark Brown
The ks8895 driver is using spi_dev_get() apparently just to take a copy of the SPI device used to instantiate it but never calls spi_dev_put() to free it. Since the device is guaranteed to exist between probe() and remove() there should be no need for the driver to take an extra reference to it so fix the leak by just using a straight assignment. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net: ethernet: davinci_emac: Fix platform_data overwriteNeil Armstrong
When the DaVinci emac driver is removed and re-probed, the actual pdev->dev.platform_data is populated with an unwanted valid pointer saved by the previous davinci_emac_of_get_pdata() call, causing a kernel crash when calling priv->int_disable() in emac_int_disable(). Unable to handle kernel paging request at virtual address c8622a80 ... [<c0426fb4>] (emac_int_disable) from [<c0427700>] (emac_dev_open+0x290/0x5f8) [<c0427700>] (emac_dev_open) from [<c04c00ec>] (__dev_open+0xb8/0x120) [<c04c00ec>] (__dev_open) from [<c04c0370>] (__dev_change_flags+0x88/0x14c) [<c04c0370>] (__dev_change_flags) from [<c04c044c>] (dev_change_flags+0x18/0x48) [<c04c044c>] (dev_change_flags) from [<c052bafc>] (devinet_ioctl+0x6b4/0x7ac) [<c052bafc>] (devinet_ioctl) from [<c04a1428>] (sock_ioctl+0x1d8/0x2c0) [<c04a1428>] (sock_ioctl) from [<c014f054>] (do_vfs_ioctl+0x41c/0x600) [<c014f054>] (do_vfs_ioctl) from [<c014f2a4>] (SyS_ioctl+0x6c/0x7c) [<c014f2a4>] (SyS_ioctl) from [<c000ff60>] (ret_fast_syscall+0x0/0x1c) Fixes: 42f59967a091 ("net: ethernet: davinci_emac: add OF support") Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net: ethernet: davinci_emac: Fix Unbalanced pm_runtime_enableNeil Armstrong
In order to avoid an Unbalanced pm_runtime_enable in the DaVinci emac driver when the device is removed and re-probed, and a pm_runtime_disable() call in davinci_emac_remove(). Actually, using unbind/bind on a TI DM8168 SoC gives : $ echo 4a120000.ethernet > /sys/bus/platform/drivers/davinci_emac/unbind net eth1: DaVinci EMAC: davinci_emac_remove() $ echo 4a120000.ethernet > /sys/bus/platform/drivers/davinci_emac/bind davinci_emac 4a120000.ethernet: Unbalanced pm_runtime_enable Cc: Brian Hutchinson <b.hutchman@gmail.com> Fixes: 3ba97381343b ("net: ethernet: davinci_emac: add pm_runtime support") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21Merge branch 'pm-cpufreq-fixes'Rafael J. Wysocki
* pm-cpufreq-fixes: cpufreq: Abort cpufreq_update_current_freq() for cpufreq_suspended set intel_pstate: Avoid getting stuck in high P-states when idle
2016-04-21qede: Fix single MTU sized packet from firmware GRO flowManish Chopra
In firmware assisted GRO flow there could be a single MTU sized segment arriving due to firmware aggregation timeout/last segment in an aggregation flow, which is not expected to be an actual gro packet. So If a skb has zero frags from the GRO flow then simply push it in the stack as non gso skb. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21qede: Fix setting Skb network headerManish Chopra
Skb's network header needs to be set before extracting IPv4/IPv6 headers from it. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 14:23:56 +0000