| Age | Commit message (Collapse) | Author |
|---|
|
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-12-git-send-email-noralf@tronnes.org
|
|
This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-5-git-send-email-noralf@tronnes.org
|
|
HDMI 2.0 PHY
Currently HDMI 2.0 PHYs do not have a default configuration function.
As *some* of the HDMI 2.0 PHYs have the same register layout as the 3D
PHYs we can provide the same default configuration function for both
and still let user overwrite this with custom configuration function
if needed.
If, for some reason, the PHY is custom or has a register different
register layout then custom configuration function *must* be provided
in order for the system to work correctly. As we prefer the pdata
provided configuration function over the internal one this change
will not make any impact in custom platforms.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Tested-by: Mark Yao <mark.yao@rock-chips.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Heiko Stübner <heiko@sntech.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/185ccf7d4473fa557044732402ca20b3d4007952.1498209896.git.joabreu@synopsys.com
|
|
The fbdev subsystem has a place for physical dimensions (width and height
in mm) that is readable by userspace. Since DRM also knows these
dimensions, pass this information to the fbdev device.
This has to be done in drm_setup_crtcs_fb() instead of drm_setup_crtcs()
because fb_helper->fbdev may be NULL in drm_setup_crtcs().
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1501863924-7154-1-git-send-email-david@lechnology.com
|
|
We don't need the CEC engine register definitions, so let's remove them.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170802184108.7913-5-hverkuil@xs4all.nl
|
|
Add a CEC driver for the dw-hdmi hardware.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
[hans.verkuil: unsigned -> unsigned int]
[hans.verkuil: cec_transmit_done -> cec_transmit_attempt_done]
[hans.verkuil: add missing CEC_CAP_PASSTHROUGH]
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170802184108.7913-4-hverkuil@xs4all.nl
|
|
The __dw_hdmi_remove() function was missing a call to cec_notifier_put
to balance the cec_notifier_get in the probe function.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/a7688d13-2d61-ed16-f2df-28cbb5007f38@xs4all.nl
|
|
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code that was not doing anything
sensible anyway.
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170804104506.2414-1-peda@axentia.se
|
|
This driver's Copyright is under Renesas Solutions Corp.
This patch updates the year, because this driver was moved
into synopsys folder in 2017.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/87tw1khvnq.wl%kuninori.morimoto.gx@renesas.com
|
|
The video setup path aways sets the clock disable register to a specific
value, which has the effect of disabling the CEC engine. When we add the
CEC driver, this becomes a problem.
Fix this by only setting/clearing the bits that the video path needs to.
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/E1dcBha-00088l-DE@rmk-PC.armlinux.org.uk
|
|
Add CEC notifier support to the HDMI bridge driver, so that the CEC
part of the IP can receive its physical address.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/E1dcBhV-00088e-8x@rmk-PC.armlinux.org.uk
|
|
This removes the call to mipi_dbi_init() from mipi_dbi_spi_init() so that
drivers can have a driver-specific implementation if needed.
Suggested-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1501799630-1650-2-git-send-email-david@lechnology.com
|
|
This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.
Cc: Stefan Agner <stefan@agner.ch>
Cc: Alison Wang <alison.wang@freescale.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-8-git-send-email-noralf@tronnes.org
|
|
The redundant fb helper .load_lut is no longer used, and can not
work right without also providing the fb helpers .gamma_set and
.gamma_get thus rendering the code in this driver suspect.
Just remove the dead code.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-14-peda@axentia.se
|
|
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-13-peda@axentia.se
|
|
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-12-peda@axentia.se
|
|
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-11-peda@axentia.se
|
|
The driver stores lut values from the fbdev interface, and is able
to give them back, but does not appear to do anything with these
lut values. The generic fb helpers have replaced this function,
and may even have made the driver work for the C8 mode from the
fbdev interface. But that is untested.
Since the fb helpers .gamma_set and .gamma_get are obsolete,
remove the dead code.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-10-peda@axentia.se
|
|
The redundant fb helpers .gamma_set and .gamma_get are no longer
used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-9-peda@axentia.se
|
|
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-8-peda@axentia.se
|
|
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-7-peda@axentia.se
|
|
The redundant fb helpers .gamma_set and .gamma_get are no longer used.
Remove the dead code.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-6-peda@axentia.se
|
|
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-5-peda@axentia.se
|
|
According to the kerneldoc[0], should do fbdev setup before calling
drm_kms_helper_poll_init(), otherwise, Kms hotplug event may race
into fbdev helper initial, and fb_helper->dev may be NULL pointer,
that would cause the bug:
[ 0.735411] [00000200] *pgd=00000000f6ffe003, *pud=00000000f6ffe003, *pmd=0000000000000000
[ 0.736156] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[ 0.736648] Modules linked in:
[ 0.736930] CPU: 2 PID: 20 Comm: kworker/2:0 Not tainted 4.4.41 #20
[ 0.737480] Hardware name: Rockchip RK3399 Board rev2 (BOX) (DT)
[ 0.738020] Workqueue: events cdn_dp_pd_event_work
[ 0.738447] task: ffffffc0f21f3100 ti: ffffffc0f2218000 task.ti: ffffffc0f2218000
[ 0.739109] PC is at mutex_lock+0x14/0x44
[ 0.739469] LR is at drm_fb_helper_hotplug_event+0x30/0x114
[ 0.756253] [<ffffff8008a344f4>] mutex_lock+0x14/0x44
[ 0.756260] [<ffffff8008445708>] drm_fb_helper_hotplug_event+0x30/0x114
[ 0.756271] [<ffffff8008473c84>] rockchip_drm_output_poll_changed+0x18/0x20
[ 0.756280] [<ffffff8008439fcc>] drm_kms_helper_hotplug_event+0x28/0x34
[ 0.756286] [<ffffff800846c444>] cdn_dp_pd_event_work+0x394/0x3c4
[ 0.756295] [<ffffff80080b2b38>] process_one_work+0x218/0x3e0
[ 0.756302] [<ffffff80080b3538>] worker_thread+0x2e8/0x404
[ 0.756308] [<ffffff80080b7e70>] kthread+0xe8/0xf0
[ 0.756316] [<ffffff8008082690>] ret_from_fork+0x10/0x40
[0]: https://01.org/linuxgraphics/gfx-docs/drm/gpu/drm-kms-helpers.html
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sandy huang <sandy.huang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501575103-20136-1-git-send-email-mark.yao@rock-chips.com
|
|
The user would be confused while facing a error commit without
any error report.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sandy huang <sandy.huang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501494596-7090-1-git-send-email-mark.yao@rock-chips.com
|
|
VOP pitch register is word align, need align to word.
VOP_WIN0_VIR:
bit[31:16] win0_vir_stride_uv
Number of words of Win0 uv Virtual width
bit[15:0] win0_vir_width
Number of words of Win0 yrgb Virtual width
ARGB888 : win0_vir_width
RGB888 : (win0_vir_width*3/4) + (win0_vir_width%3)
RGB565 : ceil(win0_vir_width/2)
YUV : ceil(win0_vir_width/4)
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sandy huang <sandy.huang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501494591-7034-1-git-send-email-mark.yao@rock-chips.com
|
|
fixup the scale calculation formula on the case
src_height == (dst_height/2).
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sandy huang <sandy.huang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501494586-6984-1-git-send-email-mark.yao@rock-chips.com
|
|
Iommu would get page fault with following path:
vop_disable:
1, disable all windows and set vop config done
2, vop enter to standy, all windows not works, but their registers
are not clean, when you read window's enable bit, may found the
window is enable.
vop_enable:
1, memcpy(vop->regsbak, vop->regs, len)
save current vop registers to vop->regsbak, then you can found
window is enable on regsbak.
2, VOP_WIN_SET(vop, win, gate, 1);
force enable window gate, but gate and enable are on same
hardware register, then window enable bit rewrite to vop hardware.
3, vop power on, and vop might try to scan destroyed buffer,
then iommu get page fault.
Move windows disable after vop regsbak restore, then vop regsbak mechanism
would keep tracing the modify, everything would be safe.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sandy huang <sandy.huang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501494582-6934-1-git-send-email-mark.yao@rock-chips.com
|
|
Since atomic framework, crtc enable and disable are in pairs,
no need to wait vblank.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sandy huang <sandy.huang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501494577-6884-1-git-send-email-mark.yao@rock-chips.com
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
https://github.com/foss-for-synopsys-dwc-arc-processors/linux into drm-next
arcgpu minor updates.
* 'topic-arcpgu-updates' of https://github.com/foss-for-synopsys-dwc-arc-processors/linux:
drm: arcpgu: Allow some clock deviation in crtc->mode_valid() callback
drm: arcpgu: Fix module unload
drm: arcpgu: Fix mmap() callback
arcpgu: Simplify driver name
drm/arcpgu: Opt in debugfs
|
|
drm-next
rcar-du updates, contains vsp1 updates as well.
* tag 'drm-next-du-20170803' of git://linuxtv.org/pinchartl/media: (24 commits)
drm: rcar-du: Use new iterator macros
drm: rcar-du: Repair vblank for DRM page flips using the VSP
drm: rcar-du: Fix race condition when disabling planes at CRTC stop
drm: rcar-du: Wait for flip completion instead of vblank in commit tail
drm: rcar-du: Use the VBK interrupt for vblank events
drm: rcar-du: Add HDMI outputs to R8A7796 device description
drm: rcar-du: Remove an unneeded NULL check
drm: rcar-du: Setup planes before enabling CRTC to avoid flicker
drm: rcar-du: Configure DPAD0 routing through last group on Gen3
drm: rcar-du: Restrict DPLL duty cycle workaround to H3 ES1.x
drm: rcar-du: Support multiple sources from the same VSP
drm: rcar-du: Fix comments to comply with the kernel coding style
drm: rcar-du: Use of_graph_get_remote_endpoint()
v4l: vsp1: Add support for header display lists in continuous mode
v4l: vsp1: Add support for multiple DRM pipelines
v4l: vsp1: Add support for multiple LIF instances
v4l: vsp1: Add support for new VSP2-BS, VSP2-DL and VSP2-D instances
v4l: vsp1: Add support for the BRS entity
v4l: vsp1: Add pipe index argument to the VSP-DU API
v4l: vsp1: Don't create links for DRM pipeline
...
|
|
This adds a new drm_setup_crtcs_fb() function to handle the parts of
drm_setup_crtcs() that touch fb_helper->fb and fb_helper->fbdev. When
drm_setup_crtcs() is called during initialization, these fields are NULL
because they have not been allocated yet.
There is currently a hack at the end of drm_fb_helper_single_fb_probe()
that sets fb_helper->fb, so it is moved to the new drm_setup_crtcs_fb()
function.
This is also done in preparation for addition setup that requires access
to fb_helper->fbdev.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1501777149-8310-2-git-send-email-david@lechnology.com
|
|
drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to use
the new APIs.
Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501761585-11757-6-git-send-email-cakturk@gmail.com
|
|
drm_plane_helper_funcs and drm_plane_funcsare not supposed to change
at runtime. All functions working with drm_plane_helper_funcs and
drm_plane_funcs work with const. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
6072 596 0 6668 1a0c atmel_hlcdc_plane.o
File size After adding 'const':
text data bss dec hex filename
6218 436 0 6654 19fe atmel_hlcdc_plane.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/646415a3b2e62182f85254115e8491e5caf4b2c7.1499098826.git.arvind.yadav.cs@gmail.com
|
|
for_each_obj_in_state is about to be removed, so use the correct new
iterator macros.
Also look at new_plane_state instead of plane->state when looking up
the hw planes in use. They should be the same except when reallocating,
(in which case this code is skipped) and we should really stop looking
at obj->state whenever possible.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The driver recently switched from handling page flip completion in the
DU vertical blanking handler to the VSP frame end handler to fix a race
condition. This unfortunately resulted in incorrect timestamps in the
vertical blanking events sent to userspace as vertical blanking is now
handled after sending the event.
To fix this we must reverse the order of the two operations. The easiest
way is to handle vertical blanking in the VSP frame end handler before
sending the event. The VSP frame end interrupt occurs approximately 50µs
earlier than the DU frame end interrupt, but this should not cause any
undue harm.
As we need to handle vertical blanking even when page flip completion is
delayed, the VSP driver now needs to call the frame end completion
callback unconditionally, with a new argument to report whether page
flip has completed.
With this new scheme the DU vertical blanking interrupt isn't needed
anymore, so we can stop enabling it.
Fixes: d503a43ac06a ("drm: rcar-du: Register a completion callback with VSP1")
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
When stopping the CRTC the driver must disable all planes and wait for
the change to take effect at the next vblank. Merely calling
drm_crtc_wait_one_vblank() is not enough, as the function doesn't
include any mechanism to handle the race with vblank interrupts.
Replace the drm_crtc_wait_one_vblank() call with a manual mechanism that
handles the vblank interrupt race.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
|
|
Page flips can take more than one vertical blanking to complete if
arming the page flips races with the vertical blanking interrupt.
Waiting for one vblank to complete the atomic commit in the commit tail
handler is thus incorrect, and can lead to framebuffers being released
while still being scanned out.
Fix this by waiting for flip completion instead, using the
drm_atomic_helper_wait_for_flip_done() helper.
Fixes: 0d230422d256 ("drm: rcar-du: Register a completion callback with VSP1")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
|
|
When implementing support for interlaced modes, the driver switched from
reporting vblank events on the vertical blanking (VBK) interrupt to the
frame end interrupt (FRM). This incorrectly divided the reported refresh
rate by two. Fix it by moving back to the VBK interrupt.
Fixes: 906eff7fcada ("drm: rcar-du: Implement support for interlaced modes")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
|
|
Update the device description with the HDMI output.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
|
|
"params" can't be NULL here. The next lines assume that we either
hit the break statement of "params->mpixelclock == ~0UL". The
inconsistent NULL checking makes static checkers complain. I've just
removed the test.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
