| Age | Commit message (Collapse) | Author |
|---|
|
Allow COMPILE_TEST to also build the MStar clk drivers
instead of only building them when ARCH_MSTARV7 is selected.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20210215115710.3762276-1-daniel@0x0f.com
[sboyd@kernel.org: Drop regmap select too]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
This adds a basic driver for the MPLL block found in MStar/SigmaStar
ARMv7 SoCs.
Currently this driver is only good for calculating the rates of it's
outputs and the actual configuration must be done before the kernel
boots. Usually this is done even before u-boot starts.
This driver targets the MPLL block found in the MSC313/MSC313E but
there is no documentation this chip so the register descriptions for
the another MStar chip the MST786 were used as they seem to match.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20210211052206.2955988-5-daniel@0x0f.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add a devm helper for clk_hw_register_fixed_factor() so that drivers that internally
register fixed factor clocks for things like dividers don't need to manually unregister
them on remove or if probe fails.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20210211052206.2955988-4-daniel@0x0f.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Pull NTB fixes from Jon Mason:
"Bug fix for IDT NTB and Intel NTB LTR management support"
* tag 'ntb-5.11' of git://github.com/jonmason/ntb:
ntb: intel: add Intel NTB LTR vendor support for gen4 NTB
ntb: idt: fix error check in ntb_hw_idt.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix a number of autobuild failures due to missing Kconfig
dependencies"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: qat - add CRYPTO_AES to Kconfig dependencies
crypto: keembay - Add dependency on HAS_IOMEM
crypto: keembay - CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 should depend on ARCH_KEEMBAY
|
|
Commit c9a3c4e637ac ("mfd: ab8500-debugfs: Remove extraneous curly
brace") removed a left-over curly brace that caused build failures, but
Joe Perches points out that the subsequent 'seq_putc()' should also be
removed, because the commit that caused all these problems already added
the final '\n' to the seq_printf() above it.
Reported-by: Joe Perches <joe@perches.com>
Fixes: 886c8121659d ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc")
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Fix a tegra enumeration regression (Rob Herring)
- Fix a designware-host check that warned on *success*, not failure
(Alexander Lobakin)
* tag 'pci-v5.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: dwc: Fix inverted condition of DMA mask setup warning
PCI: tegra: Fix host link initialization
|
|
Clang errors:
drivers/mfd/ab8500-debugfs.c:1526:2: error: non-void function does not return a value [-Werror,-Wreturn-type]
}
^
drivers/mfd/ab8500-debugfs.c:1528:2: error: expected identifier or '('
return 0;
^
drivers/mfd/ab8500-debugfs.c:1529:1: error: extraneous closing brace ('}')
}
^
3 errors generated.
The cleanup in ab8500_interrupts_show left a curly brace around, remove
it to fix the error.
Fixes: 886c8121659d ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 660c486590aa ("PCI: dwc: Set 32-bit DMA mask for MSI target address
allocation") added dma_mask_set() call to explicitly set 32-bit DMA mask
for MSI message mapping, but for now it throws a warning on ret == 0, while
dma_set_mask() returns 0 in case of success.
Fix this by inverting the condition.
[bhelgaas: join string to make it greppable]
Fixes: 660c486590aa ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation")
Link: https://lore.kernel.org/r/20201222150708.67983-1-alobakin@pm.me
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Commit b9ac0f9dc8ea ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common
code") broke enumeration of downstream devices on Tegra:
In non-working case (next-20201211):
0001:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad2 (rev a1)
0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13)
0005:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad0 (rev a1)
In working case (v5.10-rc7):
0001:00:00.0 PCI bridge: Molex Incorporated Device 1ad2 (rev a1)
0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13)
0005:00:00.0 PCI bridge: Molex Incorporated Device 1ad0 (rev a1)
0005:01:00.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab)
0005:02:02.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab)
0005:03:00.0 USB controller: PLX Technology, Inc. Device 3380 (rev ab)
The problem seems to be dw_pcie_setup_rc() is now called twice before and
after the link up handling. The fix is to move Tegra's link up handling to
.start_link() function like other DWC drivers. Tegra is a bit more
complicated than others as it re-inits the whole DWC controller to retry
the link. With this, the initialization ordering is restored to match the
prior sequence.
Fixes: b9ac0f9dc8ea ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code")
Link: https://lore.kernel.org/r/20201218143905.1614098-1-robh@kernel.org
Reported-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Vidya Sagar <vidyas@nvidia.com>
|
|
clang (quite rightly) complains fairly loudly about the newly added
mpc1_get_mpc_out_mux() function returning an uninitialized value if the
'opp_id' checks don't pass.
This may not happen in practice, but the code really shouldn't return
garbage if the sanity checks don't pass.
So just initialize 'val' to zero to avoid the issue.
Fixes: 110b055b2827 ("drm/amd/display: add getter routine to retrieve mpcc mux")
Cc: Josip Pavic <Josip.Pavic@amd.com>
Cc: Bindu Ramamurthy <bindu.r@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"This is the second attempt after the first one failed miserably and
got zapped to unblock the rest of the interrupt related patches.
A treewide cleanup of interrupt descriptor (ab)use with all sorts of
racy accesses, inefficient and disfunctional code. The goal is to
remove the export of irq_to_desc() to prevent these things from
creeping up again"
* tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
genirq: Restrict export of irq_to_desc()
xen/events: Implement irq distribution
xen/events: Reduce irq_info:: Spurious_cnt storage size
xen/events: Only force affinity mask for percpu interrupts
xen/events: Use immediate affinity setting
xen/events: Remove disfunct affinity spreading
xen/events: Remove unused bind_evtchn_to_irq_lateeoi()
net/mlx5: Use effective interrupt affinity
net/mlx5: Replace irq_to_desc() abuse
net/mlx4: Use effective interrupt affinity
net/mlx4: Replace irq_to_desc() abuse
PCI: mobiveil: Use irq_data_get_irq_chip_data()
PCI: xilinx-nwl: Use irq_data_get_irq_chip_data()
NTB/msi: Use irq_has_action()
mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc
pinctrl: nomadik: Use irq_has_action()
drm/i915/pmu: Replace open coded kstat_irqs() copy
drm/i915/lpe_audio: Remove pointless irq_to_desc() usage
s390/irq: Use irq_desc_kstat_cpu() in show_msi_interrupt()
parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Borislav Petkov:
"These got delayed due to a last minute ia64 build issue which got
fixed in the meantime.
EFI updates collected by Ard Biesheuvel:
- Don't move BSS section around pointlessly in the x86 decompressor
- Refactor helper for discovering the EFI secure boot mode
- Wire up EFI secure boot to IMA for arm64
- Some fixes for the capsule loader
- Expose the RT_PROP table via the EFI test module
- Relax DT and kernel placement restrictions on ARM
with a few followup fixes:
- fix the build breakage on IA64 caused by recent capsule loader
changes
- suppress a type mismatch build warning in the expansion of
EFI_PHYS_ALIGN on ARM"
* tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: arm: force use of unsigned type for EFI_PHYS_ALIGN
efi: ia64: disable the capsule loader
efi: stub: get rid of efi_get_max_fdt_addr()
efi/efi_test: read RuntimeServicesSupported
efi: arm: reduce minimum alignment of uncompressed kernel
efi: capsule: clean scatter-gather entries from the D-cache
efi: capsule: use atomic kmap for transient sglist mappings
efi: x86/xen: switch to efi_get_secureboot_mode helper
arm64/ima: add ima_arch support
ima: generalize x86/EFI arch glue for other EFI architectures
efi: generalize efi_get_secureboot
efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes
efi/x86: Only copy the compressed kernel image in efi_relocate_kernel()
efi/libstub/x86: simplify efi_is_native()
|
|
Pull block fixes from Jens Axboe:
"A few stragglers in here, but mostly just straight fixes. In
particular:
- Set of rnbd fixes for issues around changes for the merge window
(Gioh, Jack, Md Haris Iqbal)
- iocost tracepoint addition (Baolin)
- Copyright/maintainers update (Christoph)
- Remove old blk-mq fast path CPU warning (Daniel)
- loop max_part fix (Josh)
- Remote IPI threaded IRQ fix (Sebastian)
- dasd stable fixes (Stefan)
- bcache merge window fixup and style fixup (Yi, Zheng)"
* tag 'block-5.11-2020-12-23' of git://git.kernel.dk/linux-block:
md/bcache: convert comma to semicolon
bcache:remove a superfluous check in register_bcache
block: update some copyrights
block: remove a pointless self-reference in block_dev.c
MAINTAINERS: add fs/block_dev.c to the block section
blk-mq: Don't complete on a remote CPU in force threaded mode
s390/dasd: fix list corruption of lcu list
s390/dasd: fix list corruption of pavgroup group list
s390/dasd: prevent inconsistent LCU device data
s390/dasd: fix hanging device offline processing
blk-iocost: Add iocg idle state tracepoint
nbd: Respect max_part for all partition scans
block/rnbd-clt: Does not request pdu to rtrs-clt
block/rnbd-clt: Dynamically allocate sglist for rnbd_iu
block/rnbd: Set write-back cache and fua same to the target device
block/rnbd: Fix typos
block/rnbd-srv: Protect dev session sysfs removal
block/rnbd-clt: Fix possible memleak
block/rnbd-clt: Get rid of warning regarding size argument in strlcpy
blk-mq: Remove 'running from the wrong CPU' warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"Twas the day before Christmas and the only thing stirring in libnvdimm
/ device-dax land is a pile of miscellaneous fixups and cleanups.
The bulk of it has appeared in -next save the last two patches to
device-dax that have passed my build and unit tests.
- Fix a long standing block-window-namespace issue surfaced by the
ndctl change to attempt to preserve the kernel device name over
a 'reconfigure'
- Fix a few error path memory leaks in nfit and device-dax
- Silence a smatch warning in the ioctl path
- Miscellaneous cleanups"
* tag 'libnvdimm-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
device-dax: Avoid an unnecessary check in alloc_dev_dax_range()
device-dax: Fix range release
device-dax: delete a redundancy check in dev_dax_validate_align()
libnvdimm/label: Return -ENXIO for no slot in __blk_label_update
device-dax/core: Fix memory leak when rmmod dax.ko
device-dax/pmem: Convert comma to semicolon
libnvdimm: Cleanup include of badblocks.h
ACPI: NFIT: Fix input validation of bus-family
libnvdimm/namespace: Fix reaping of invalidated block-window-namespace labels
ACPI/nfit: avoid accessing uninitialized memory in acpi_nfit_ctl()
|
|
Pull drm fixes from Dave Airlie:
"Xmas eve pull request present.
Just some fixes that trickled in this past week: Mostly amdgpu fixes,
with a dma-buf/mips build fix and some misc komeda fixes.
dma-buf:
- fix build on mips
komeda:
- fix commit tail operation order
- NULL pointer fix
- out of bounds access fix
ttm:
- remove an unused function
amdgpu:
- Vangogh SMU fixes
- Arcturus gfx9 fixes
- Misc display fixes
- Sienna Cichlid SMU update
- Fix S3 display memory leak
- Fix regression caused by DP sub-connector support
amdkfd:
- Properly require pcie atomics for gfx10"
* tag 'drm-next-2020-12-24' of git://anongit.freedesktop.org/drm/drm: (31 commits)
drm/amd/display: Fix memory leaks in S3 resume
drm/amdgpu: Fix a copy-pasta comment
drm/amdgpu: only set DP subconnector type on DP and eDP connectors
drm/amd/pm: bump Sienna Cichlid smu_driver_if version to match latest pmfw
drm/amd/display: add getter routine to retrieve mpcc mux
drm/amd/display: always program DPPDTO unless not safe to lower
drm/amd/display: [FW Promotion] Release 0.0.47
drm/amd/display: updated wm table for Renoir
drm/amd/display: Acquire DSC during split stream for ODM only if top_pipe
drm/amd/display: Multi-display underflow observed
drm/amd/display: Remove unnecessary NULL check
drm/amd/display: Update RN/VGH active display count workaround
drm/amd/display: change SMU repsonse timeout to 2s.
drm/amd/display: gradually ramp ABM intensity
drm/amd/display: To modify the condition in indicating branch device
drm/amd/display: Modify the hdcp device count check condition
drm/amd/display: Interfaces for hubp blank and soft reset
drm/amd/display: handler not correctly checked at remove_irq_handler
drm/amdgpu: check gfx pipe availability before toggling its interrupts
drm/amdgpu: remove unnecessary asic type check
...
|
|
Pull virtio updates from Michael Tsirkin:
- vdpa sim refactoring
- virtio mem: Big Block Mode support
- misc cleanus, fixes
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (61 commits)
vdpa: Use simpler version of ida allocation
vdpa: Add missing comment for virtqueue count
uapi: virtio_ids: add missing device type IDs from OASIS spec
uapi: virtio_ids.h: consistent indentions
vhost scsi: fix error return code in vhost_scsi_set_endpoint()
virtio_ring: Fix two use after free bugs
virtio_net: Fix error code in probe()
virtio_ring: Cut and paste bugs in vring_create_virtqueue_packed()
tools/virtio: add barrier for aarch64
tools/virtio: add krealloc_array
tools/virtio: include asm/bug.h
vdpa/mlx5: Use write memory barrier after updating CQ index
vdpa: split vdpasim to core and net modules
vdpa_sim: split vdpasim_virtqueue's iov field in out_iov and in_iov
vdpa_sim: make vdpasim->buffer size configurable
vdpa_sim: use kvmalloc to allocate vdpasim->buffer
vdpa_sim: set vringh notify callback
vdpa_sim: add set_config callback in vdpasim_dev_attr
vdpa_sim: add get_config callback in vdpasim_dev_attr
vdpa_sim: make 'config' generic and usable for any device type
...
|
|
Pull in miscellaneous device-dax fixups and cleanups for v5.11.
|
|
Swap the calling sequence of krealloc() and __request_region(), call the
latter first. In this way, the value of dev_dax->nr_range does not need to
be considered when __request_region() failed.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20201219081840.1149-2-thunder.leizhen@huawei.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
There are multiple locations that open-code the release of the last
range in a device-dax instance. Consolidate this into a new
dev_dax_trim_range() helper.
This also addresses a kmemleak report:
# cat /sys/kernel/debug/kmemleak
[..]
unreferenced object 0xffff976bd46f6240 (size 64):
comm "ndctl", pid 23556, jiffies 4299514316 (age 5406.733s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 20 c3 37 00 00 00 .......... .7...
ff ff ff 7f 38 00 00 00 00 00 00 00 00 00 00 00 ....8...........
backtrace:
[<00000000064003cf>] __kmalloc_track_caller+0x136/0x379
[<00000000d85e3c52>] krealloc+0x67/0x92
[<00000000d7d3ba8a>] __alloc_dev_dax_range+0x73/0x25c
[<0000000027d58626>] devm_create_dev_dax+0x27d/0x416
[<00000000434abd43>] __dax_pmem_probe+0x1c9/0x1000 [dax_pmem_core]
[<0000000083726c1c>] dax_pmem_probe+0x10/0x1f [dax_pmem]
[<00000000b5f2319c>] nvdimm_bus_probe+0x9d/0x340 [libnvdimm]
[<00000000c055e544>] really_probe+0x230/0x48d
[<000000006cabd38e>] driver_probe_device+0x122/0x13b
[<0000000029c7b95a>] device_driver_attach+0x5b/0x60
[<0000000053e5659b>] bind_store+0xb7/0xc3
[<00000000d3bdaadc>] drv_attr_store+0x27/0x31
[<00000000949069c5>] sysfs_kf_write+0x4a/0x57
[<000000004a8b5adf>] kernfs_fop_write+0x150/0x1e5
[<00000000bded60f0>] __vfs_write+0x1b/0x34
[<00000000b92900f0>] vfs_write+0xd8/0x1d1
Reported-by: Jane Chu <jane.chu@oracle.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/160834570161.1791850.14911670304441510419.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://people.freedesktop.org/~agd5f/linux into drm-next
amd-drm-fixes-5.11-2020-12-23:
amdgpu:
- Vangogh SMU fixes
- Arcturus gfx9 fixes
- Misc display fixes
- Sienna Cichlid SMU update
- Fix S3 display memory leak
- Fix regression caused by DP sub-connector support
amdkfd:
- Properly require pcie atomics for gfx10
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201223204752.4019-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
Short summary of fixes pull:
* dma-buf: Include <linux/vmalloc.h> for building on MIPS
* komeda: Fix order of operation in commit tail; Fix NULL-pointer and
out-of-bounds access; Cleanups
* ttm: Fix an unused-function warning
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/X+JFYlW1SEZa6ShA@linux-uq9g
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- A series from Prashant for Type-C to implement TYPEC_STATUS,
parsing USB PD Partner ID VDOs, and registering partner altmodes.
cros_ec misc:
- Don't treat RTC events as wakeup sources in cros_ec_proto"
* tag 'tag-chrome-platform-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_typec: Tolerate unrecognized mux flags
platform/chrome: cros_ec_typec: Register partner altmodes
platform/chrome: cros_ec_typec: Parse partner PD ID VDOs
platform/chrome: cros_ec_typec: Introduce TYPEC_STATUS
platform/chrome: cros_ec: Import Type C host commands
platform/chrome: cros_ec_typec: Clear partner identity on device removal
platform/chrome: cros_ec_typec: Fix remove partner logic
platform/chrome: cros_ec_typec: Relocate set_port_params_v*() functions
platform/chrome: Don't treat RTC events as wakeup sources
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Removal of the pnx83xx driver
- Add a binding for A100's watchdog controller
- Add Rockchip compatibles to snps,dw-wdt.yaml
- hpwdt: Disable NMI in Crash Kernel
- Fix potential dereferencing of null pointer in watchdog_core
- Several other small fixes and improvements
* tag 'linux-watchdog-5.11-rc1' of git://www.linux-watchdog.org/linux-watchdog: (23 commits)
watchdog: convert comma to semicolon
watchdog: iTCO_wdt: use dev_*() instead of pr_*() for logging
dt-binding: watchdog: add Rockchip compatibles to snps,dw-wdt.yaml
watchdog: coh901327: add COMMON_CLK dependency
dt-bindings: watchdog: sun4i: Add A100 compatible
watchdog: qcom: Avoid context switch in restart handler
watchdog: iTCO_wdt: use module_platform_device() macro
watchdog: Fix potential dereferencing of null pointer
watchdog: wdat_wdt: Fix missing kerneldoc reported by W=1
watchdog/hpwdt: Reflect changes
watchdog/hpwdt: Disable NMI in Crash Kernel
wdt: sp805: add watchdog_stop on reboot
watchdog: sbc_fitpc2_wdt: add __user annotations
watchdog: geodewdt: remove unneeded break
watchdog: rti-wdt: fix reference leak in rti_wdt_probe
watchdog: qcom_wdt: set WDOG_HW_RUNNING bit when appropriate
watchdog: remove pnx83xx driver
watchdog: stm32_iwdg: don't print an error on probe deferral
watchdog: sprd: change to use usleep_range() instead of busy loop
watchdog: sprd: check busy bit before new loading rather than after that
...
|
|
EDID parsing in S3 resume pushes new display modes
to probed_modes list but doesn't consolidate to actual
mode list. This creates a race condition when
amdgpu_dm_connector_ddc_get_modes() re-initializes the
list head without walking the list and results in memory leak.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=209987
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
This is not a scsi driver.
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes a crash in drm_object_property_set_value() because the property
is not set for internal DP ports that connect to a bridge chips
(e.g., DP to VGA or DP to LVDS).
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=210739
Fixes: 65bf2cf95d3ade ("drm/amdgpu: utilize subconnector property for DP through atombios")
Tested-By: Kris Karas <bugs-a17@moonlit-rail.com>
Cc: Oleg Vasilev <oleg.vasilev@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.10.x
|
|
This can suppress the annoying but unharmful prompts.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Add function to identify which MPCC is providing input to a specified OPP
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We defer clock updates to after pipes have been programmed. In
some instances we use DPPCLK that have been previously set to be
"unused". This results in a brief window of time where underflow
could occur.
[How]
During prepare bandwidth allow rn_update_clocks_update_dpp_dto
to check each instance and compare previous clock to new clock.
If new clock is higher than previous clock, program DPPDTO.
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- restore lvtma_pwrseq_delay2 from vbios integrated info table
- restore MVID/NVID after power up.
- Enable timer wake up mask when enable timer interrupt.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
For certain timings, Renoir may underflow due to sr exit latency
being too slow.
[How]
Updated wm table for renoir.
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
DSC should only be acquired per OPP. Therefore, DSC should only
be acquired for the top_pipe when ODM is enabled.
Not doing this check may lead to acquiring more DSC's than needed
when doing MPO + ODM Combine.
[HOW]
Only acquire DSC if pipe is top_pipe.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
FP2 programming not happening when topology changes occur with multiple
displays.
[How]
Ensure FP2 is programmed whenever global sync changes occur but wait for
VACTIVE first to avoid underflow.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
new_crtc_state is already dereferenced earlier in the function
[How]
Remove the check
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Virtual signals were previously counted as a workaround to S0i2 hang
which is fixed on Renoir. This blocks S0i3 diags testing.
[HOW]
Stop counting virtual signals as S0i2 hang is fixed on Renoir.
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
there is some garbage showing up during reboot test.
Reason:
SMU might handle display driver msg defered and driver will send
next msg to SMU after 10ms timeout, once SMU FW handle previous msg,
parameters are changed to next one, which result in a wrong value be programmed.
[How]
Extend timeout to 2s so SMU will have enough time to handle driver msg.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Need driver to pass values of backlight ramp start and ramp reduction so
that intensity can be ramped down appropriately.
[How]
Using abm_parameters structure to get these values from driver.
Signed-off-by: Rizvi <syerizvi@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
The sink count change HPD_IRQ will be ignored if the branch device has only
DP DFP.
[how]
To remove the port type restriction.
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Some MST display may not report the internal panel to DEVICE_COUNT,
that makes the check condition always failed.
[how]
To update this condition with the reported device count + 1
(because the immediate repeater's internal panel is possibly
not included in DEVICE_COUNT)
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
HUBP blanking sequence on DCN30 requires us to check if HUBP is in blank
and also toggle HUBP_DISABLE, which should instead be called
HUBP_SOFT_RESET for what it does in HW.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
handler is supposedly passed in as a function pointer;
however, the entire struct amdgpu_dm_irq_handler_data
gets from the list is used to check match.
[how]
use the interrupt_handler within amdgpu_dm_irq_handler_data
for checking match.
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
GUI_IDLE interrupts controlled by CP_INT_CNTL_RING0
are only applicable to me0 pipe0.
For ASICs that have gfx pipe removed, don't toggle
those bits.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The number of crtc should be 0 for ASICs that don't
have display engine. Remove the unnecessary asic type
check then.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Check number of gfx ring, rather than asic type,
before cp gfx engine initialization so driver just
need to make sure number of gfx ring is initialized
correctly in gfx early_init phase. No need to add
additional asic type check everywhere when there is
new asic with gfx pipe removed.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Coly Li <colyli@sue.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There have no reassign the bdev after check It is IS_ERR.
the double check !IS_ERR(bdev) is superfluous.
After commit 4e7b5671c6a8 ("block: remove i_bdev"),
"Switch the block device lookup interfaces to directly work with a dev_t
so that struct block_device references are only acquired by the
blkdev_get variants (and the blk-cgroup special case). This means that
we now don't need an extra reference in the inode and can generally
simplify handling of struct block_device to keep the lookups contained
in the core block layer code."
so after lookup_bdev call, there no need to do bdput.
remove a superfluous check the bdev & don't call bdput after lookup_bdev.
Fixes: 4e7b5671c6a8("block: remove i_bdev")
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch includes a missing dependency (CRYPTO_AES) which may
lead to an "undefined reference to `aes_expandkey'" linking error.
Fixes: 5106dfeaeabe ("crypto: qat - add AES-XTS support for QAT GEN4 devices")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add dependency for CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 on HAS_IOMEM to
prevent build failures.
Fixes: 88574332451380f4 ("crypto: keembay - Add support for Keem Bay OCS AES/SM4")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The Intel Keem Bay Offload and Crypto Subsystem (OCS) is only present on
Intel Keem Bay SoCs. Hence add a dependency on ARCH_KEEMBAY, to prevent
asking the user about this driver when configuring a kernel without
Intel Keem Bay platform support.
While at it, fix a misspelling of "cipher".
Fixes: 88574332451380f4 ("crypto: keembay - Add support for Keem Bay OCS AES/SM4")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
