summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2015-02-15Input: ALPS - renumber protocol numbersDmitry Torokhov
In order to accommodate new protocol number for Rushmore touchpads let's shift protocol numbers by 8 bits (i.e. 1 -> 0x100) - this way we keep protocol version reported in input device id the same as it was, but add some holes in numbering. Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-11Input: adi - remove an unnecessary checkMarkus Elfring
The input_free_device() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-11Input: pxa27x_keypad - remove an unneeded NULL checkDan Carpenter
Static checkers complain about this NULL check because we dereference it without checking a couple lines later. This function is only called when "keypad->pdata" is non-NULL so we can just delete the NULL test. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> [Dmitry: remove the variable altogether given that it is used just once and dereference directly.] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-10Input: soc_button_array - use "Windows" key for "Home"Bastien Nocera
KEY_HOME is the key to go back to the beginning of the line, not the key to get into an overview mode, as Windows does. GNOME can already make use of the Windows key on multiple form factors, and other desktop environments can use it depending on the form factor. Using "Windows" as the emitted key also means that the keycode sent out matches the symbol on the key itself. So switch KEY_HOME to KEY_LEFTMETA ("Windows" key). Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-07Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull one more infiniband revert from Roland Dreier: "One more last-second RDMA change for 3.19: Yann realized that the previous revert of new userspace ABI did not go far enough, and we're still exposing a change that we don't want. Revert even closer to 3.18 interface to make sure we get things right in the long run" Yann Droneaud pipes up: "I hope this could go in v3.19 as, at this stage, we don't want to expose any bits of this ABI in a released kernel" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: Revert "IB/core: Add support for extended query device caps"
2015-02-06Input: elan_i2c - fix wrong %p extensionRasmus Villemoes
There's no %px extension. From the context I think the intention was to dump the five bytes which were not as expected, and for that one should use %ph. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-06Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: "The pending MIPS fixes for 3.19. All across the field and nothing particularly severe or dramatic" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (23 commits) IRQCHIP: mips-gic: Avoid rerouting timer IRQs for smp-cmp MIPS: Fix syscall_get_nr for the syscall exit tracing. MIPS: elf2ecoff: Ignore PT_MIPS_ABIFLAGS program headers. MIPS: elf2ecoff: Rewrite main processing loop to switch. MIPS: fork: Fix MSA/FPU/DSP context duplication race MIPS: Fix C0_Pagegrain[IEC] support. MIPS: traps: Fix inline asm ctc1 missing .set hardfloat MIPS: mipsregs.h: Add write_32bit_cp1_register() MIPS: Fix kernel lockup or crash after CPU offline/online MIPS: OCTEON: fix kernel crash when offlining a CPU MIPS: ARC: Fix build error. MIPS: IRQ: Fix disable_irq on CPU IRQs MIPS: smp-mt,smp-cmp: Enable all HW IRQs on secondary CPUs MIPS: Fix restart of indirect syscalls MIPS: ELF: fix loading o32 binaries on 64-bit kernels MIPS: mips-cm: Fix sparse warnings MIPS: Kconfig: Fix recursive dependency. MIPS: Compat: Fix build error if CONFIG_MIPS32_COMPAT but no compat ABI. MIPS: JZ4740: Fixup #include's (sparse) MIPS: Wire up execveat(2). ...
2015-02-06Revert "IB/core: Add support for extended query device caps"Yann Droneaud
While commit 7e36ef8205ff ("IB/core: Temporarily disable ex_query_device uverb") is correct as it makes the extended QUERY_DEVICE uverb (which came as part of commit 5a77abf9a97a ("IB/core: Add support for extended query device caps") and commit 860f10a799c8 ("IB/core: Add flags for on demand paging support")) not available to userspace, it doesn't address the initial issue regarding ib_copy_to_udata() [1][2]. Additionally, further discussions around this new uverb seems to conclude it would require a different data structure than the one currently described in <rdma/ib_user_verbs.h> [3]. Both of these issues require a revert of the changes, so this patch partially reverts commit 8cdd312cfed7 ("IB/mlx5: Implement the ODP capability query verb") and commit 860f10a799c8 ("IB/core: Add flags for on demand paging support") and fully reverts commit 5a77abf9a97a ("IB/core: Add support for extended query device caps"). [1] "Re: [PATCH v3 06/17] IB/core: Add support for extended query device caps" http://mid.gmane.org/1418733236.2779.26.camel@opteya.com [2] "Re: [PATCH] IB/core: Temporarily disable ex_query_device uverb" http://mid.gmane.org/1423067503.3030.83.camel@opteya.com [3] "RE: [PATCH v1 1/5] IB/uverbs: ex_query_device: answer must not depend on request's comp_mask" http://mid.gmane.org/2807E5FD2F6FDA4886F6618EAC48510E0CC12C30@CRSMSX101.amr.corp.intel.com Cc: Eli Cohen <eli@mellanox.com> Cc: Haggai Eran <haggaie@mellanox.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-05Input: evdev - do not queue SYN_DROPPED if queue is emptyDmitry Torokhov
There is no point in queueing EV_SYN/SYN_DROPPED on clock type change when there are no events in the client's queue and doing so confuses tests in libinput package, so let's not do that. Reported-and-tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-05MMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Stretch ACKs can kill performance with Reno and CUBIC congestion control, largely due to LRO and GRO. Fix from Neal Cardwell. 2) Fix userland breakage because we accidently emit zero length netlink messages from the bridging code. From Roopa Prabhu. 3) Carry handling in generic csum_tcpudp_nofold is broken, fix from Karl Beldan. 4) Remove bogus dev_set_net() calls from CAIF driver, from Nicolas Dichtel. 5) Make sure PPP deflation never returns a length greater then the output buffer, otherwise we overflow and trigger skb_over_panic(). Fix from Florian Westphal. 6) COSA driver needs VIRT_TO_BUS Kconfig dependencies, from Arnd Bergmann. 7) Don't increase route cached MTU on datagram too big ICMPs. From Li Wei. 8) Fix error path leaks in nf_tables, from Pablo Neira Ayuso. 9) Fix bitmask handling regression in netlink that broke things like acpi userland tools. From Pablo Neira Ayuso. 10) Wrong header pointer passed to param_type2af() in SCTP code, from Saran Maruti Ramanara. 11) Stacked vlans not handled correctly by vlan_get_protocol(), from Toshiaki Makita. 12) Add missing DMA memory barrier to xgene driver, from Iyappan Subramanian. 13) Fix crash in rate estimators, from Eric Dumazet. 14) We've been adding various workarounds, one after another, for the change which added the per-net tcp_sock. It was meant to reduce socket contention but added lots of problems. Reduce this instead to a proper per-cpu socket and that rids us of all the daemons. From Eric Dumazet. 15) Fix memory corruption and OOPS in mlx4 driver, from Jack Morgenstein. 16) When we disabled UFO in the virtio_net device, it introduces some serious performance regressions. The orignal problem was IPV6 fragment ID generation, so fix that properly instead. From Vlad Yasevich. 17) sr9700 driver build breaks on xtensa because it defines macros with the same name as those used by the arch code. Use more unique names. From Chen Gang. 18) Fix endianness in new virio 1.0 mode of the vhost net driver, from Michael S Tsirkin. 19) Several sysctls were setting the maxlen attribute incorrectly, from Sasha Levin. 20) Don't accept an FQ scheduler quantum of zero, that leads to crashes. From Kenneth Klette Jonassen. 21) Fix dumping of non-existing actions in the packet scheduler classifier. From Ignacy Gawędzki. 22) Return the write work_done value when doing TX work in the qlcnic driver. 23) ip6gre_err accesses the info field with the wrong endianness, from Sabrina Dubroca. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits) sit: fix some __be16/u16 mismatches ipv6: fix sparse errors in ip6_make_flowlabel() net: remove some sparse warnings flow_keys: n_proto type should be __be16 ip6_gre: fix endianness errors in ip6gre_err qlcnic: Fix NAPI poll routine for Tx completion amd-xgbe: Set RSS enablement based on hardware features amd-xgbe: Adjust for zero-based traffic class count cls_api.c: Fix dumping of non-existing actions' stats. pkt_sched: fq: avoid hang when quantum 0 net: rds: use correct size for max unacked packets and bytes vhost/net: fix up num_buffers endian-ness gianfar: correct the bad expression while writing bit-pattern net: usb: sr9700: Use 'SR_' prefix for the common register macros Revert "drivers/net: Disable UFO through virtio" Revert "drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets" ipv6: Select fragment id during UFO segmentation if not set. xen-netback: stop the guest rx thread after a fatal error net/mlx4_core: Fix kernel Oops (mem corruption) when working with more than 80 VFs isdn: off by one in connect_res() ...
2015-02-05Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This patch set is fixing two serious problems which have turned up late in the release cycle. The first fixes a problem with 4k sector disks where the transfer length (amount of data sent to the disk) was getting increased every time the disk was revalidated leading to potential for overflows. The other is a regression oops fix for some of our last merge window code" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: sd: Fix max transfer length for 4k disks scsi: fix device handler detach oops
2015-02-05Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Radeon and amdkfd fixes. Radeon ones mostly for oops in some test/benchmark functions since fencing changes, and one regression fix for old GPUs, There is one cirrus regression fix, the 32bpp broke userspace, so this hides it behind a module option for the few users who care. I'm off for a few days, so this is probably the final pull I have, if I see fixes from Intel I'll forward the pull as I should have email" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/cirrus: Limit modes depending on bpp option drm/radeon: fix the crash in test functions drm/radeon: fix the crash in benchmark functions drm/radeon: properly set vm fragment size for TN/RL drm/radeon: don't init gpuvm if accel is disabled (v3) drm/radeon: fix PLLs on RS880 and older v2 drm/amdkfd: Don't create BUG due to incorrect user parameter drm/amdkfd: max num of queues can't be 0 drm/amdkfd: Fix bug in accounting of queues
2015-02-05Merge tag 'spi-v3.19-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A couple of driver specific fixes: - Disable DMA mode for i.MX6DL chips due to a hardware bug. - Don't use devm_kzalloc() outside of bind/unbind paths in the fsl-dspi driver, fixing memory leaks" * tag 'spi-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: imx: use pio mode for i.mx6dl spi: spi-fsl-dspi: Remove usage of devm_kzalloc
2015-02-05Merge tag 'pm+acpi-3.19-fin' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI power management fix from Rafael Wysocki: "This is a revert of an ACPI Low-power Subsystem (LPSS) driver change that was supposed to improve power management of the LPSS DMA controller, but introduced more serious problems. Since fixing them turns out to be non-trivial, it is better to revert the commit in question at this point and try to fix the original issue differently in the next cycle" * tag 'pm+acpi-3.19-fin' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI / LPSS: introduce a 'proxy' device to power on LPSS for DMA"
2015-02-05Merge tag 'pci-v3.19-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Enumeration - Scan all device numbers on NEC as well as Stratus (Charlotte Richardson) Resource management - Handle read-only BARs on AMD CS553x devices (Myron Stowe) Synopsys DesignWare - Reject MSI-X IRQs (Lucas Stach)" * tag 'pci-v3.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Handle read-only BARs on AMD CS553x devices PCI: Add NEC variants to Stratus ftServer PCIe DMI check PCI: designware: Reject MSI-X IRQs
2015-02-05IRQCHIP: mips-gic: Avoid rerouting timer IRQs for smp-cmpJames Hogan
Commit e9de688dac65 ("irqchip: mips-gic: Support local interrupts") changed the GIC irqchip driver so that all local interrupts were routed to the same CPU pin used for external interrupts. Unfortunately this causes a regression when smp-cmp is used. The CPUs are started by the bootloader and put in a timer based waiting poll loop, but when their timer interrupts are rerouted to a different IRQ pin which is not unmasked they never wake up. Since smp-cmp support is deprecated and everybody who was using it should be switching to smp-cps which brings up the secondary CPUs without bootloader assistance, I've gone for the simple fix which can be easily removed once smp-cmp is removed, rather than a fully generic fix. In __gic_init() the local GIC_VPE_TIMER_MAP register is read to find the boot-time routing of the local timer interrupt, and a chained handler is added to that CPU pin as well as the normal one. Signed-off-by: James Hogan <james.hogan@imgtec.com> Fixes: e9de688dac65 ("irqchip: mips-gic: Support local interrupts") Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Patchwork: https://patchwork.linux-mips.org/patch/9081/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-05qlcnic: Fix NAPI poll routine for Tx completionShahed Shaikh
After d75b1ade567f ("net: less interrupt masking in NAPI") driver's NAPI poll routine is expected to return exact budget value if it wants to be re-called. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Fixes: d75b1ade567f ("net: less interrupt masking in NAPI") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04amd-xgbe: Set RSS enablement based on hardware featuresLendacky, Thomas
The RSS support requires enablement based on the features reported by the hardware. The setting of this flag is missing. Add support to set the RSS enablement flag based on the reported hardware features. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04amd-xgbe: Adjust for zero-based traffic class countLendacky, Thomas
The number of traffic classes reported by the hardware is zero-based so increment the value returned to get an actual count. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05drm/cirrus: Limit modes depending on bpp optionTakashi Iwai
The commit [8975626ea35a: drm/cirrus: allow 32bpp framebuffers for cirrus drm] broke X modesetting driver because cirrus driver still provides the full list of modes up to 1280x1024 while the 32bpp can support only up to 800x600. We might be able to filter out the invalid modes in mode_valid callback, but unfortunately the bpp in question can't be referred there for now (let me know if there is a better way to retrieve the bpp for the probed fb). So, instead, this patch adds the bpp module option to specify the maximal bpp explicitly and limits the resolutions in get_modes depending on its value. The default value is set to 24 so that the existing stuff keeps working. If you need a new 32bpp feature, specify cirrus.bpp=32 option explicitly. Fixes: 8975626ea35a ('drm/cirrus: allow 32bpp framebuffers for cirrus drm') Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-02-04vhost/net: fix up num_buffers endian-nessMichael S. Tsirkin
In virtio 1.0 mode, when mergeable buffers are enabled on a big-endian host, num_buffers wasn't byte-swapped correctly, so large incoming packets got corrupted. To fix, fill it in within hdr - this also makes sure it gets the correct type. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04gianfar: correct the bad expression while writing bit-patternSanjeev Sharma
This patch correct the bad expression while writing the bit-pattern from software's buffer to hardware registers. Signed-off-by: Sanjeev Sharma <Sanjeev_Sharma@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04net: usb: sr9700: Use 'SR_' prefix for the common register macrosChen Gang
The commone register macors (e.g. RSR) is too commont to drivers, it may be conflict with the architectures (e.g. xtensa, sh). The related warnings (with allmodconfig under xtensa): CC [M] drivers/net/usb/sr9700.o In file included from drivers/net/usb/sr9700.c:24:0: drivers/net/usb/sr9700.h:65:0: warning: "RSR" redefined #define RSR 0x06 ^ In file included from ./arch/xtensa/include/asm/bitops.h:22:0, from include/linux/bitops.h:36, from include/linux/kernel.h:10, from include/linux/list.h:8, from include/linux/module.h:9, from drivers/net/usb/sr9700.c:13: ./arch/xtensa/include/asm/processor.h:190:0: note: this is the location of the previous definition #define RSR(v,sr) __asm__ __volatile__ ("rsr %0,"__stringify(sr) : "=a"(v)); ^ Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04Merge remote-tracking branches 'spi/fix/fsl-dspi' and 'spi/fix/imx' into ↵Mark Brown
spi-linus
2015-02-04Input: gscps2 - fix MODULE_DEVICE_TABLE invocationGeert Uytterhoeven
The patch "module: fix types of device tables aliases" newly requires that invocations of MODULE_DEVICE_TABLE(type, name); come *after* the definition of `name'. That is reasonable, but gscps2 wasn't doing this. Fix it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-03Revert "drivers/net: Disable UFO through virtio"Vlad Yasevich
This reverts commit 3d0ad09412ffe00c9afa201d01effdb6023d09b4. Now that GSO functionality can correctly track if the fragment id has been selected and select a fragment id if necessary, we can re-enable UFO on tap/macvap and virtio devices. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03Revert "drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets"Vlad Yasevich
This reverts commit 5188cd44c55db3e92cd9e77a40b5baa7ed4340f7. Now that GSO layer can track if fragment id has been selected and can allocate one if necessary, we don't need to do this in tap and macvtap. This reverts most of the code and only keeps the new ipv6 fragment id generation function that is still needed. Fixes: 3d0ad09412ff (drivers/net: Disable UFO through virtio) Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband reverts from Roland Dreier: "Last minute InfiniBand/RDMA changes for 3.19: - Revert IPoIB driver back to 3.18 state. We had a number of fixes go into 3.19, but they introduced regressions. We tried to get everything fixed up but ran out of time, so we'll try again for 3.20. - Similarly, turn off the new "extended query port" verb. Late in the cycle we realized the ABI is not quite right, and rather than freeze something in a rush and make a mistake, we'll take a bit more time and get it right in 3.20" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/core: Temporarily disable ex_query_device uverb Revert "IPoIB: Consolidate rtnl_lock tasks in workqueue" Revert "IPoIB: Make the carrier_on_task race aware" Revert "IPoIB: fix MCAST_FLAG_BUSY usage" Revert "IPoIB: fix mcast_dev_flush/mcast_restart_task race" Revert "IPoIB: change init sequence ordering" Revert "IPoIB: Use dedicated workqueues per interface" Revert "IPoIB: Make ipoib_mcast_stop_thread flush the workqueue" Revert "IPoIB: No longer use flush as a parameter"
2015-02-03Merge tag 'md/3.19-fixes' of git://neil.brown.name/mdLinus Torvalds
Pull two fixes for md from Neil Brown: - Another live lock, needs backporting - work-around false positive with new warnings. * tag 'md/3.19-fixes' of git://neil.brown.name/md: md/bitmap: fix a might_sleep() warning. md/raid5: fix another livelock caused by non-aligned writes.
2015-02-03PCI: Handle read-only BARs on AMD CS553x devicesMyron Stowe
Some AMD CS553x devices have read-only BARs because of a firmware or hardware defect. There's a workaround in quirk_cs5536_vsa(), but it no longer works after 36e8164882ca ("PCI: Restore detection of read-only BARs"). Prior to 36e8164882ca, we filled in res->start; afterwards we leave it zeroed out. The quirk only updated the size, so the driver tried to use a region starting at zero, which didn't work. Expand quirk_cs5536_vsa() to read the base addresses from the BARs and hard-code the sizes. On Nix's system BAR 2's read-only value is 0x6200. Prior to 36e8164882ca, we interpret that as a 512-byte BAR based on the lowest-order bit set. Per datasheet sec 5.6.1, that BAR (MFGPT) requires only 64 bytes; use that to avoid clearing any address bits if a platform uses only 64-byte alignment. [bhelgaas: changelog, reduce BAR 2 size to 64] Fixes: 36e8164882ca ("PCI: Restore detection of read-only BARs") Link: https://bugzilla.kernel.org/show_bug.cgi?id=85991#c4 Link: http://support.amd.com/TechDocs/31506_cs5535_databook.pdf Link: http://support.amd.com/TechDocs/33238G_cs5536_db.pdf Reported-and-tested-by: Nix <nix@esperi.org.uk> Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v.2.6.27+
2015-02-03Input: synaptics - use dmax in input_mt_assign_slotsBenjamin Tissoires
When tapping a clickpad with two fingers, there is a chance that the sensor sees first only one finger, and at the next scan only the second one. In this case, the sensors says that there has been only one finger on the clickpad, which moved really fast between two scans. We can try to counter this by adding a limit to what an actual finger can move between 2 scans. A distance of 1cm between two scans for one finger seems reasonable. However, this is not really accurate because the resolution in X and in Y differs. But heh, that's how the in-kernel tracking works right now, and its job is quite good, even with this approximation. This parameter solves most of the jumps observed, not all of them however. But this is a hardware defect, and we might not be able to get something better without much heavier computations. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=76722 Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-03Input: pxa27x_keypad - remove unnecessary ARM includesRob Herring
Remove some left-over ARM only includes in order to enable building on ARM64. __raw_{read,write}l were getting implicitly included, so add linux/io.h include. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-03Input: ti_am335x_tsc - replace delta filtering with median filteringVignesh R
Previously, delta filtering was applied TSC co-ordinate readouts before reporting a single value to user space. This patch replaces delta filtering with median filtering. Median filtering sorts co-ordinate readouts, drops min and max values, and reports the average of remaining values. This method is more sensible than delta filtering. Median filtering is applied only if number of readouts is greater than 3 else just average of co-ordinate readouts is reported. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-03Input: ti_am335x_tsc - read charge delay from DTVignesh R
This patch reads charge delay from tsc DT node and writes to REG_CHARGEDELAY register. If the charge delay is not specified in DT then default value of 0x400(CHARGEDLY_OPENDLY) is used. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-03Input: ti_am335x_tsc - remove udelay in interrupt handlerBrad Griffis
TSC interrupt handler had udelay to avoid reporting of false pen-up interrupt to user space. This patch implements workaround suggesting in Advisory 1.0.31 of silicon errata for am335x, thus eliminating udelay and touchscreen lag. This also improves performance of touchscreen and eliminates sudden jump of cursor at touch release. IDLECONFIG and CHARGECONFIG registers are to be configured with same values in order to eliminate false pen-up events. This workaround may result in false pen-down to be detected, hence considerable charge step delay needs to be added. The charge delay is set to 0xB000 (in terms of ADC clock cycles) by default. TSC steps are disabled at the end of every sampling cycle and EOS bit is set. Once the EOS bit is set, the TSC steps need to be re-enabled to begin next sampling cycle. Signed-off-by: Brad Griffis <bgriffis@ti.com> [vigneshr@ti.com: Ported the patch from v3.12 to v3.19rc1] Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-03Input: ti_am335x_tsc - interchange touchscreen and ADC stepsBrad Griffis
This patch makes the initial changes required to workaround TSC-false pen-up interrupts. It is required to implement these changes in order to remove udelay in the TSC interrupt handler and false pen-up events. The charge step is to be executed immediately after sampling X+. Hence TSC is made to use higher numbered steps (steps 5 to 16 for 5 co-ordinate readouts, 4 wire TSC configuration) and ADC to use lower ones. Further X co-ordinate readouts must be the last to be sampled, thus co-ordinates are sampled in the order Y-Z-X. Signed-off-by: Brad Griffis <bgriffis@ti.com> [vigneshr@ti.com: Ported the patch from v3.12 to v3.19rc1] Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-03Merge tag 'gpio-v3.19-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull gpio fixes from Linus Walleij: "Yet more GPIO fixes for the v3.19 series. There is a high bug-spot activity in GPIO this merge window, much due to Johan Hovolds spearheading into actually exercising the removal path for GPIO chips, something that was never really exercised before. The other two fixes are augmenting erroneous behaviours in two specific drivers for minor systems. Summary from signed tag: - Two fixes stabilizing that which was never stable before: removal of GPIO chips, now let's stop leaking memory. - Make sure OMAP IRQs are usable when the irqchip API is used orthogonally to the gpiochip API. - Provide a default GPIO base for the mcp23s08 driver" * tag 'gpio-v3.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: sysfs: fix memory leak in gpiod_sysfs_set_active_low gpio: sysfs: fix memory leak in gpiod_export_link gpio: mcp23s08: handle default gpio base gpio: omap: Fix bad device access with setup_irq()
2015-02-03Merge branches 'ipoib' and 'odp' into for-nextRoland Dreier
2015-02-03IB/core: Temporarily disable ex_query_device uverbHaggai Eran
Commit 5a77abf9a97a ("IB/core: Add support for extended query device caps") added a new extended verb to query the capabilities of RDMA devices, but the semantics of this verb are still under debate [1]. Don't expose this verb to userspace until the ABI is nailed down. [1] [PATCH v1 0/5] IB/core: extended query device caps cleanup for v3.19 http://www.spinics.net/lists/linux-rdma/msg22904.html Signed-off-by: Haggai Eran <haggaie@mellanox.com> Reviewed-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-03Revert "ACPI / LPSS: introduce a 'proxy' device to power on LPSS for DMA"Rafael J. Wysocki
Revert commit 6c17ee44d524 (ACPI / LPSS: introduce a 'proxy' device to power on LPSS for DMA), as it introduced registration and probe ordering problems between devices on the LPSS that may lead to full hard system hang on boot in some cases.
2015-02-03spi: imx: use pio mode for i.mx6dlRobin Gong
For TKT238285 hardware issue which may cause txfifo store data twice can only be caught on i.mx6dl, we use pio mode instead of DMA mode on i.mx6dl. Fixes: f62caccd12c17e4 (spi: spi-imx: add DMA support) Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-02-02xen-netback: stop the guest rx thread after a fatal errorDavid Vrabel
After commit e9d8b2c2968499c1f96563e6522c56958d5a1d0d (xen-netback: disable rogue vif in kthread context), a fatal (protocol) error would leave the guest Rx thread spinning, wasting CPU time. Commit ecf08d2dbb96d5a4b4bcc53a39e8d29cc8fef02e (xen-netback: reintroduce guest Rx stall detection) made this even worse by removing a cond_resched() from this path. Since a fatal error is non-recoverable, just allow the guest Rx thread to exit. This requires taking additional refs to the task so the thread exiting early is handled safely. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reported-by: Julien Grall <julien.grall@linaro.org> Tested-by: Julien Grall <julien.grall@linaro.org> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02net/mlx4_core: Fix kernel Oops (mem corruption) when working with more than ↵Jack Morgenstein
80 VFs Commit de966c592802 (net/mlx4_core: Support more than 64 VFs) was meant to allow up to 126 VFs. However, due to leaving MLX4_MFUNC_MAX too low, using more than 80 VFs resulted in memory corruptions (and Oopses) when more than 80 VFs were requested. In addition, the number of slaves was left too high. This commit fixes these issues. Fixes: de966c592802 ("net/mlx4_core: Support more than 64 VFs") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02isdn: off by one in connect_res()Dan Carpenter
The bug here is that we use "Reject" as the index into the cau_t[] array in the else path. Since the cau_t[] has 9 elements if Reject == 9 then we are reading beyond the end of the array. My understanding of the code is that it's saying that if Reject is 1 or too high then that's invalid and we should hang up. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02sunvnet: set queue mapping when doing packet copiesDavid L Stevens
This patch fixes a bug where vnet_skb_shape() didn't set the already-selected queue mapping when a packet copy was required. This results in using the wrong queue index for stops/starts, hung tx queues and watchdog timeouts under heavy load. Signed-off-by: David L Stevens <david.stevens@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02qlge: Fix qlge_update_hw_vlan_features to handle if interface is downMarcelo Leitner
Currently qlge_update_hw_vlan_features() will always first put the interface down, then update features and then bring it up again. But it is possible to hit this code while the adapter is down and this causes a non-paired call to napi_disable(), which will get stuck. This patch fixes it by skipping these down/up actions if the interface is already down. Fixes: a45adbe8d352 ("qlge: Enhance nested VLAN (Q-in-Q) handling.") Cc: Harish Patil <harish.patil@qlogic.com> Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03Merge tag 'drm-amdkfd-fixes-2015-02-02' of ↵Dave Airlie
git://people.freedesktop.org/~gabbayo/linux into drm-fixes Three small fixes that came up during last week, nothing scary: - Accidently incremented a counter instead of decrementing it (copy-paste error) - Module parameter of max num of queues must be at least 1 and not 0 - Don't do BUG() as a result from wrong user input * tag 'drm-amdkfd-fixes-2015-02-02' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: Don't create BUG due to incorrect user parameter drm/amdkfd: max num of queues can't be 0 drm/amdkfd: Fix bug in accounting of queues
2015-02-03Merge branch 'drm-fixes-3.19' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes One last round of fixes for radeon for 3.19: - fix some fallout from the reservation object integration on the test/benchmark options - fix a crash in the gpu vm code if gfx init fails - fix a pll issue that leads to a blank screen on older IGP parts * 'drm-fixes-3.19' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix the crash in test functions drm/radeon: fix the crash in benchmark functions drm/radeon: properly set vm fragment size for TN/RL drm/radeon: don't init gpuvm if accel is disabled (v3) drm/radeon: fix PLLs on RS880 and older v2
2015-02-02drm/radeon: fix the crash in test functionsIlija Hadzic
radeon_copy_dma and radeon_copy_blit must be called with a valid reservation object. Otherwise a crash will be provoked. We borrow the object from vram BO. bug: https://bugs.freedesktop.org/show_bug.cgi?id=88464 Cc: stable@vger.kernel.org Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-02drm/radeon: fix the crash in benchmark functionsIlija Hadzic
radeon_copy_dma and radeon_copy_blit must be called with a valid reservation object. Otherwise a crash will be provoked. We borrow the object from destination BO. bug: https://bugs.freedesktop.org/show_bug.cgi?id=88464 Cc: stable@vger.kernel.org Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>