summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2014-09-30pinctrl: nomadik: improve GPIO debug printsLinus Walleij
The debugfs file would only define if the line was "pulled" and not which direction (pull up or pull down). Improve this by taking two print paths depending on whether the pin is set as input or output and use the data register directly to figure out whether the pin is set for pull up or pull down. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-30pinctrl: abx500: refactor DT parser to take two pathsLinus Walleij
We refactor the DT parser to look for either a config or a function and then look for further nodes and reserve maps, not the two things mixed up like prior to this patch. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-30pinctrl: abx500: use helpers for map allocation/freeLinus Walleij
This switches the abx500 driver to use the pin control helper utils for allocating and free:ing maps. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-29pinctrl: nomadik: refactor DT parser to take two pathsLinus Walleij
We refactor the DT parser to look for either a config or a function and then look for further nodes and reserve maps, not the two things mixed up like prior to this patch. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-29pinctrl: nomadik: use utils map free functionLinus Walleij
Stop brewing our own map free function and rely on the pinctrl utils helpers. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-29pinctrl: nomadik: use util function to reserve mapsLinus Walleij
Stop brewing our own pin map reservation function and use the generic code. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-26pinctrl: qcom: use restart_notifier mechanism for ps_holdJosh Cartwright
By converting to the restart_notifier mechanism for restart, we allow for other mechanisms, like the watchdog, to be used for restart in the case where PS_HOLD has failed to reset the chip. Since this mechanism may be one of several mechanisms registered, change the post-ps_hold write timeout to be a more reasonable 1 second instead of 10 seconds. Choose priority 128, as according to documentation, this mechanism "is sufficient to restart the entire system". Tested-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-23pinctrl: sh-pfc: sh73a0: Remove unnecessary SoC data allocationLaurent Pinchart
The SoC data structure allocated at init time only holds a regulator pointer that is only used in the init function. Replace it with a local variable and get rid of the SoC data structure allocation altogether. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-23pinctrl: berlin: fix the dt_free_map functionAntoine Tenart
The berlin_pinctrl_dt_free_map function tries to free memory allocated and handled by the of subsystem. This is wrong and already handled by pinctrl_dt_free_maps() which calls of_node_put(). This patch fixes the Berlin pinctrl way of freeing its maps, avoiding a kernel BUG(), by using the common pinctrl_utils_dt_free_map function instead. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-23pinctrl: at91: disable PD or PU before enabling PU or PDWenyou Yang
Disable Pull-Down or Pull-Up property before enabling Pull-Up or Pull-Down, because the pin's Pull-Up and Pull-Down property is mutually exclusive. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-23pinctrl: st: remove gpiochip in failure casesPramod Gurav
This patch releases gpiochip related resources by calling gpiochip_remove when gpiochip_irqchip_add fails. Cc: Maxime Coquelin <maxime.coquelin@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-23pinctrl: at91: Fix error handling while doing gpiochio_irqchip_addPramod Gurav
This patch removes a call to panic function when gpiochio_irqchip_add fails and just returns the error to the calling function. Same return value is used to handle the error case and adds a lable to release resources on error. The error message has been improved to indicate failure to add irqchip to gpiochip. This also changes first argument to function at91_gpio_of_irq_setup from struct device_node to struct platform_device. Because The device_node argument was anyway not being used. Passed pdev so that on failure dev_err can use &pdev->dev and log can be associated with proper device. CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> CC: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-23pinctrl: at91: Fix failure path in at91_gpio_probe pathPramod Gurav
This fixes the whole error handling in probe function by capturing and returning error values on kernel function like clk_prepare, clk_enable, gpiochip_add etc. CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> CC: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-23pinctrl: lantiq: Release gpiochip resources in fail casePramod Gurav
This patch releases gpiochip resources with of_gpiochip_remove and gpiochip_remove in failure cases. CC: John Crispin <blogic@openwrt.org> CC: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-23pinctrl: imx: detect uninitialized pinsStefan Agner
The pinctrl driver initialized the register offsets for the pins with 0. On Vybrid an offset of 0 is a valid offset for the pinctrl mux register. So far, this was solved using the ZERO_OFFSET_VALID flag which allowed offsets of 0. However, this does not allow to verify whether a pins struct imx_pmx_func was initialized or not. Use signed offset values for register offsets and initialize those with -1 in order to detect uninitialized offset values reliable. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-19pinctrl: tegra: Add MIPI pad controlSean Paul
This patch adds MIPI CSI/DSIB pad control mux register from the APB misc block to tegra pinctrl. Without writing to this register, the dsib pads are muxed as csi, and cannot be used. The register is not yet documented in the TRM, here is the description: 70000820: APB_MISC_GP_MIPI_PAD_CTRL_0 [31:02] RESERVED [01:01] DSIB_MODE [CSI=0,DSIB=1] [00:00] RESERVED Signed-off-by: Sean Paul <seanpaul@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-05pinctrl: at91: Switch to using managed clk_getPramod Gurav
This patch switches to using managed version of clk_get and hence removes clk_put from failure path. CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> CC: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-05pinctrl: adi2: Remove duplicate gpiochip_remove_pin_rangesPramod Gurav
This patch removes call to gpiochip_remove_pin_ranges() from platform_driver remove function as it will anway be called by gpiochip_remove(). CC: Sonic Zhang <sonic.zhang@analog.com> CC: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-05pinctrl: single: fix freudian slipLinus Walleij
commit 03e9f0cac5da6af85758276cb4624caf5911f2b9 "pinctrl: clean up after enable refactoring" renamed the vtable callback .enable to .set_mux. The renaming was done manually, and one of the alterations contained a freudian slip. I confess, I am human. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-05pinctrl: at91: add drive strength configurationMarek Roszko
The SAMA5 and SAM9x5 series both have drive strength options for the PIOs. This patch adds the ability to set one of three hardware options for drive strengths of low, medium or high for the each pin. The actual current output of the chip based on the setting is defined in the datasheets and varies per pins separate from banks and with supply voltage. This patch adds three new dt-bindings that allow setting the strength when configuring pins. By default, no change will be made to the drive strength of a pin from its reset value. Due to the difference between the register addresses of the SAMA5 and SAM9x5 series, a new sama5d3-pinctrl id was added. Signed-off-by: Marek Roszko <mark.roszko@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-04pinctrl: prima2: add I2S 2ch, 6ch, nodin, mclk groupsRongjun Ying
we have done that for atlas6 in commit ed36c1a, 086b8904 etc. here we do same things for prima2. Signed-off-by: Rongjun Ying <rongjun.ying@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-04pinctrl: sirf: Remove gpiochip on failure casesPramod Gurav
This patch releases gpiochip related resources by calling gpiochip_remove when gpiochip_irqchip_add fails. CC: Linus Walleij <linus.walleij@linaro.org> CC: Barry Song <Baohua.Song@csr.com> CC: Rongjun Ying <rongjun.ying@csr.com> CC: Yuping Luo <yuping.luo@csr.com> Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-04pinctrl: qcom: Make the target processor value configurableGeorgi Djakov
Currently the value used to specify that interrupts from the gpio should be routed to the application processor is hardcoded for all Qualcomm SoCs. But the new APQ8084 SoC uses a different value. To resolve this, we make this value configurable for each SoC. For all existing SoCs we continue to use the current value, and only for APQ8084 we use the new value. Suggested-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-04pinctrl: qcom: Add APQ8084 pinctrl supportGeorgi Djakov
This patchset adds pinctrl support for the Qualcomm APQ8084 platform. This set of patches adds pinctrl support for the Qualcomm APQ8084 platform. The first patch adds the pin definitions. The second patch contains the devicetree binding documentation. The third patch adds the DT node. The last patch makes the INTR_TARGET_PROC_APPS value configurable and defines it for each existing SoC. Tested on IFC6540 board. Changes since v3: - Fixed the sdc valid pin values in the binding documentation - sdc2 instead of sdc3. (suggested by Bjorn Andersson) Changes since v2: - Fixed some incorrect bits and offsets. (suggested by Bjorn Andersson) - Updated binding documentation to follow the format of msm8960. (suggested by Bjorn Andersson) - Added fourth patch, which removes the hardcoded INTR_TARGET_PROC_APPS value and makes it configurable. Also we keep the current value for existing SoCs. (suggested by Bjorn Andersson) Changes since v1: - Updated the total number of pins (suggested by Bjorn Andersson) - Added the missing pin info (provided by Andy Gross) - Updated groups and functions to be consistent with other pinctrls. (suggested by Andy Gross) - Removed unused functions, qdss and test pins. (suggested by Andy Gross) - Updated the documentation with the possible functions. Reviewed-by: Andy Gross <agross@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-04pinctrl: sh-pfc: rename confusing pinmux ops variableLinus Walleij
The vtable named *pinmux_ops in the affected files are not really about pin multiplexing, but a struct related to some PFC-specific operations, inclusing pin config (bias setting). Rename the variable so as to avoid confusions. Acked-by: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-04pinctrl: imx/mxs: move freescale drivers to subdirLinus Walleij
This moves all the Freescale-related drivers (i.MX and MXS) to its own subdirectory to clear the view. Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Anson Huang <b20788@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Denis Carikli <denis@eukrea.com> Cc: Markus Pargmann <mpa@pengutronix.de> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-04pinctrl: clean up after enable refactoringLinus Walleij
commit 2243a87d90b42eb38bc281957df3e57c712b5e56 "pinctrl: avoid duplicated calling enable_pinmux_setting for a pin" removed the .disable callback from the struct pinmux_ops, making the .enable() callback the only remaining callback. However .enable() is a bad name as it seems to imply that a muxing can also be disabled. Rename the callback to .set_mux() and also take this opportunity to clean out any remaining mentions of .disable() from the documentation. Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Fan Wu <fwu@marvell.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-02pinctrl: qcom: Add support for reset for apq8064Pramod Gurav
This patch adds support for reset functions to reboot the boards with soc apq8064. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: "Ivan T. Ivanov" <iivanov@mm-sol.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Andy Gross <agross@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-02pinctrl: qcom: remove gpiochip in failure casesPramod Gurav
This patch releases gpiochip related resources by calling gpiochip_remove when either of gpiochip_add_pin_range and gpiochip_irqchip_add fails. CC: Linus Walleij <linus.walleij@linaro.org> CC: "Ivan T. Ivanov" <iivanov@mm-sol.com> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-02pinctrl: sh-pfc: use a saner Kconfig symbolLinus Walleij
There is currently a kludge to get the Makefile to move down to sh-pfc:s drivers: the arch definitions are used twice to get it done. However we can very well use the Kconfig symbol for the SH PFC pin control feature itself: it doesn't matter that it comes from a lower leaf in the Kconfig hierarchy which is completely orthogonal. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-29pinctrl: samsung: use CONFIG_PINCTRL_SAMSUNG symbol in makefileNaveen Krishna Chatradhi
Samsung Exynos7 is a ARM64bit processor. Which does not select the CONFIG_PLAT_SAMSUNG symbol. CONFIG_PINCTRL_SAMSUNG is being selected for both PLAT_SAMSUNG and ARCH_EXYNOS7 symbols. This patch modifes the pinctrl/Makefile to use CONFIG_PINCTRL_SAMSUNG symbol to compile the pinctrl/samsung/*.c Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: linus.walleij@linaro.org Cc: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-29pinctrl: single: AM437x: Add pinctrl compatibilityKeerthy
AM437x pinctrl definitions now differ from traditional 16 bit OMAP pin ctrl definitions, in that all 32 bits are used to describe a single pin Also the location of wakeupenable and event bits have changed. Signed-off-by: Keerthy <j-keerthy@ti.com> [nm@ti.com: minor updates] Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-29pinctrl: single: Add DRA7 pinctrl compatibilityNishanth Menon
DRA7 pinctrl definitions now differ from traditional 16 bit OMAP pin ctrl definitions, in that all 32 bits are used to describe a single pin Also the location of wakeupenable and event bits have changed. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-29pinctrl: atlas6: Add I2S external clock input pingroupRongjun Ying
The I2S controller can use the external clock as reference clock with master mode. But based on different hardware or software design, this external clock might be needed or not needed. So the external input pin can be an independent pinctrl group, and the card driver can decice to get it or not. Signed-off-by: Rongjun Ying <rongjun.ying@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-29pinctrl: atlas6: take mclk pin out of i2s pingroupRongjun Ying
The I2S controller can output mclk to external audio codec. But by hardware design, some codecs need mclk and some codecs do not need mclk. So the mclk pin can be an independent pinctrl group, and the card driver can get it or not based on boards. Signed-off-by: Rongjun Ying <rongjun.ying@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-29pinctrl: sirf: fix lots of "line over 80 characters"Bin Shi
According to key customer's requirement, fix "line over 80 characters". Signed-off-by: Bin Shi <Bin.Shi@csr.com> Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-29pinctrl: sirf: fix "quoted string split across lines"Bin Shi
this patch fixes: WARNING: quoted string split across lines 902: FILE: drivers/pinctrl/sirf/pinctrl-sirf.c:902: +MODULE_AUTHOR("Rongjun Ying <rongjun.ying@csr.com>, " + "Yuping Luo <yuping.luo@csr.com>, " WARNING: quoted string split across lines 903: FILE: drivers/pinctrl/sirf/pinctrl-sirf.c:903: + "Yuping Luo <yuping.luo@csr.com>, " + "Barry Song <baohua.song@csr.com>"); Signed-off-by: Bin Shi <Bin.Shi@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-29pinctrl: imx6sl: introduce MODULE_DEVICE_TABLE for module autoloadingKiran Padwal
Enable autoloading of pinctrl-imx6sl module when a corresponing DT entry is present. Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-29pinctrl: Make of_device_id array constKiran Padwal
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Kiran Padwal <kiran.padwal21@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-28pinctrl: Add i.MX21 pincontrol driverAlexander Shiyan
This patch adds pincontrol driver for Freescale i.MX21 SOCs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-25Merge tag 'renesas-sh-drivers-for-v3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas Pull SH driver fix from Simon Horman: "Confine SH_INTC to platforms that need it" * tag 'renesas-sh-drivers-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: sh: intc: Confine SH_INTC to platforms that need it
2014-08-24Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "A couple of EFI fixes, plus misc fixes all around the map" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/arm64: Store Runtime Services revision firmware: Do not use WARN_ON(!spin_is_locked()) x86_32, entry: Clean up sysenter_badsys declaration x86/doc: Fix the 'tlb_single_page_flush_ceiling' sysconfig path x86/mm: Fix sparse 'tlb_single_page_flush_ceiling' warning and make the variable read-mostly x86/mm: Fix RCU splat from new TLB tracepoints
2014-08-24Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A collection of fixes from this week, it's been pretty quiet and nothing really stands out as particularly noteworthy here -- mostly minor fixes across the field: - ODROID booting was fixed due to PMIC interrupts missing in DT - a collection of i.MX fixes - minor Tegra fix for regulators - Rockchip fix and addition of SoC-specific mailing list to make it easier to find posted patches" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: bus: arm-ccn: Fix warning message ARM: shmobile: koelsch: Remove non-existent i2c6 pinmux ARM: tegra: apalis/colibri t30: fix on-module 5v0 supplies MAINTAINERS: add new Rockchip SoC list ARM: dts: rockchip: readd missing mmc0 pinctrl settings ARM: dts: ODROID i2c improvements ARM: dts: Enable PMIC interrupts on ODROID ARM: dts: imx6sx: fix the pad setting for uart CTS_B ARM: dts: i.MX53: fix apparent bug in VPU clks ARM: imx: correct gpu2d_axi and gpu3d_axi clock setting ARM: dts: imx6: edmqmx6: change enet reset pin ARM: dts: vf610-twr: Fix pinctrl_esdhc1 pin definitions. ARM: imx: remove unnecessary ARCH_HAS_OPP select ARM: imx: fix TLB missing of IOMUXC base address during suspend ARM: imx6: fix SMP compilation again ARM: dt: sun6i: Add #address-cells and #size-cells to i2c controller nodes
2014-08-24Merge tag 'gpio-v3.17-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull gpio fixes from Linus Walleij: - a largeish fix for the IRQ handling in the new Zynq driver. The quite verbose commit message gives the exact details. - move some defines for gpiod flags outside an ifdef to make stub functions work again. - various minor fixes that we can accept for -rc1. * tag 'gpio-v3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio-lynxpoint: enable input sensing in resume gpio: move GPIOD flags outside #ifdef gpio: delete unneeded test before of_node_put gpio: zynq: Fix IRQ handlers gpiolib: devres: use correct structure type name in sizeof MAINTAINERS: Change maintainer for gpio-bcm-kona.c
2014-08-24Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Intel and radeon fixes. Post KS/LC git requests from i915 and radeon stacked up. They are all fixes along with some new pci ids for radeon, and one maintainers file entry. - i915: display fixes and irq fixes - radeon: pci ids, and misc gpuvm, dpm and hdp cache" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (29 commits) MAINTAINERS: Add entry for Renesas DRM drivers drm/radeon: add additional SI pci ids drm/radeon: add new bonaire pci ids drm/radeon: add new KV pci id Revert "drm/radeon: Use write-combined CPU mappings of ring buffers with PCIe" drm/radeon: fix active_cu mask on SI and CIK after re-init (v3) drm/radeon: fix active cu count for SI and CIK drm/radeon: re-enable selective GPUVM flushing drm/radeon: Sync ME and PFP after CP semaphore waits v4 drm/radeon: fix display handling in radeon_gpu_reset drm/radeon: fix pm handling in radeon_gpu_reset drm/radeon: Only flush HDP cache for indirect buffers from userspace drm/radeon: properly document reloc priority mask drm/i915: don't try to retrain a DP link on an inactive CRTC drm/i915: make sure VDD is turned off during system suspend drm/i915: cancel hotplug and dig_port work during suspend and unload drm/i915: fix HPD IRQ reenable work cancelation drm/i915: take display port power domain in DP HPD handler drm/i915: Don't try to enable cursor from setplane when crtc is disabled drm/i915: Skip load detect when intel_crtc->new_enable==true ...
2014-08-24bus: arm-ccn: Fix warning messagePawel Moll
A message warning a user about wrong vc value was printing out port instead. Reported-by: Drew Richardson <drew.richardson@arm.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-22Merge tag 'pwm/for-3.17-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm fix from Thierry Reding: "Just one bugfix for the PWM lookup table code that would cause a PWM channel to be set to the wrong period and polarity for non-perfect matches" * tag 'pwm/for-3.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: Fix period and polarity in pwm_get() for non-perfect matches
2014-08-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Here are some bug fixes that have piled up during ksummit/linuxcon. 1) Fix endian problems in ibmveth, from Anton Blanchard. 2) IPV6 routing code does GFP_KERNEL allocation in atomic, fix from Benjamin Block. 3) SCTP association fixes from Daniel Borkmann. 4) When multiple VLAN headers are present we have to make sure the second and subsequent ones are pullable in the SKB otherwise we blindly dereference garbage. From Jiri Benc. 5) The argument adjustment of the signature of hlist_add_after*() introduced a regression in the batman-adv code, fix from Sven Eckelmann. 6) Fix TX hang handling to avoid a panic in i40e, from Anjali Singhai Jain. 7) PTP flag test is inverted in i40e driver, from Jesse Brandeburg. 8) ATM LEC driver needs to hold RTNL mutex over MTU changes, from Chas Williams. 9) Truncate packets larger then the TPACKET_V3 format configured buffers, otherwise we overwrite past the end of said buffers. From Eric Dumazet. 10) Fix endianness bugs in qlcnic firmware handling, from Rajesh Borundia and Shahed Shaikh. 11) CXGB4 sometimes doesn't get all of the TX completion events it should resulting in SKBs getting stuck in the TX queue, from Hariprasad Shenai. 12) When the FEC chip's PTP clock is disabled, you can't access the register. Add necessary checks to avoid the resulting hang, from Fugang Duan" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (37 commits) drivers: isdn: eicon: xdi_msg.h: Fix typo in #ifndef net: sctp: fix suboptimal edge-case on non-active active/retrans path selection net: sctp: spare unnecessary comparison in sctp_trans_elect_best net: ethernet: broadcom: bnx2x: Remove redundant #ifdef ibmveth: Fix endian issues with rx_no_buffer statistic net: xgene: fix possible NULL dereference in xgene_enet_free_desc_rings() openvswitch: fix panic with multiple vlan headers net: ipv6: fib: don't sleep inside atomic lock net: fec: ptp: avoid register access when ipg clock is disabled cxgb4: Free completed tx skbs promptly cxgb4: Fix race condition in cleanup sctp: not send SCTP_PEER_ADDR_CHANGE notifications with failed probe bnx2x: Revert UNDI flushing mechanism qlcnic: Fix endianess issue in firmware load from file operation qlcnic: Fix endianess issue in FW dump template header qlcnic: Fix flash access interface to application MAINTAINERS: Add section for MRF24J40 IEEE 802.15.4 radio driver macvlan: Allow setting multicast filter on all macvlan types packet: handle too big packets for PACKET_V3 MAINTAINERS: add entry for ec_bhf driver ...
2014-08-22drivers: isdn: eicon: xdi_msg.h: Fix typo in #ifndefRasmus Villemoes
Test for definedness of the macro which is actually defined (the change is hard to see: it is s/SSS/SSA/). Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22net: ethernet: broadcom: bnx2x: Remove redundant #ifdefRasmus Villemoes
Nothing defines _ASM_GENERIC_INT_L64_H, it is a weird way to check for 64 bit longs, and u64 should be printed using %llx anyway. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 13:05:07 +0000