summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-07-12i40iw: Enable remote access rights for stag allocationShiraz Saleem
Fix to enable remote access rights when allocating stag. Fixes: b7aee855d3b9 ("RDMA/i40iw: Add base memory management extensions") Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-07-12i40iw: do not print unitialized variables in error messageNicolas Iooss
i40iw_create_cqp() printed the contents of variables maj_err and min_err in an error message before they could be initialized (by calling dev->cqp_ops->cqp_create). Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-07-12IB core: Add port_xmit_wait counterChristoph Lameter
Add the missing port_xmit_wait counter. This counter is displayed through some tools like perfquery but is not available via sysfs. For the PORT_PMA_ATTR macro the _counter field is set to zero allowing us to specify the offset directly like with PORT_PMA_ATTR_EXT See also the earlier work in 2008 by Vladimir Skolovsky https://www.mail-archive.com/general@lists.openfabrics.org/msg20313.html Signed-off-by: Vladimir Sokolvsky <vlad@mellanox.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-07-12IB/hfi1: Fix sleep inside atomic issue in init_asic_dataTadeusz Struk
The critical section should protect only the list traversal and dd->asic_data modification, not the memory allocation. The fix pulls the allocation out of the critical section. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-07-12IB/hfi1: Correct issues with sc5 computationMike Marciniszyn
There are several computatations of the sc in the ud receive routine. Besides the code duplication, all are wrong when the sc is greater than 15. In that case the code incorrectly or's a 1 into the computed sc instead of 1 shifted left by 4. Fix precomputed sc5 by using an already implemented routine hdr2sc() and deleting flawed duplicated code. Cc: Stable <stable@vger.kernel.org> # 4.6+ Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23Merge branches '4.7-rc-misc', 'hfi1-fixes', 'i40iw-rc-fixes' and ↵Doug Ledford
'mellanox-rc-fixes' into k.o/for-4.7-rc
2016-06-23IB/srpt: Reduce QP buffer sizeBart Van Assche
The memory needed for the send and receive queues associated with a QP is proportional to the max_sge parameter. The current value of that parameter is such that with an mlx4 HCA the QP buffer size is 8 MB. Since DMA is used for communication between HCA and CPU that buffer either has to be allocated coherently or map_single() must succeed for that buffer. Since large contiguous allocations are fragile and since the maximum segment size for e.g. swiotlb is 256 KB, reduce the max_sge parameter. This patch avoids that the following text appears on the console after SRP logout and relogin on a system equipped with multiple IB HCAs: mlx4_core 0000:05:00.0: swiotlb buffer is full (sz: 8388608 bytes) swiotlb: coherent allocation failed for device 0000:05:00.0 size=8388608 CPU: 11 PID: 148 Comm: kworker/11:1 Not tainted 4.7.0-rc4-dbg+ #1 Call Trace: [<ffffffff812c6d35>] dump_stack+0x67/0x92 [<ffffffff812efe71>] swiotlb_alloc_coherent+0x141/0x150 [<ffffffff810458be>] x86_swiotlb_alloc_coherent+0x3e/0x50 [<ffffffffa03861fa>] mlx4_buf_direct_alloc.isra.5+0x9a/0x120 [mlx4_core] [<ffffffffa0386545>] mlx4_buf_alloc+0x165/0x1a0 [mlx4_core] [<ffffffffa035053d>] create_qp_common.isra.29+0x57d/0xff0 [mlx4_ib] [<ffffffffa03510da>] mlx4_ib_create_qp+0x12a/0x3f0 [mlx4_ib] [<ffffffffa031154a>] ib_create_qp+0x3a/0x250 [ib_core] [<ffffffffa055dd4b>] srpt_cm_handler+0x4bb/0xcad [ib_srpt] [<ffffffffa02c1ab0>] cm_process_work+0x20/0xf0 [ib_cm] [<ffffffffa02c3640>] cm_work_handler+0x1ac0/0x2059 [ib_cm] [<ffffffff810737ed>] process_one_work+0x19d/0x490 [<ffffffff81073b29>] worker_thread+0x49/0x490 [<ffffffff8107a0ea>] kthread+0xea/0x100 [<ffffffff815b25af>] ret_from_fork+0x1f/0x40 Fixes: b99f8e4d7bcd ("IB/srpt: convert to the generic RDMA READ/WRITE API") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Laurence Oberman <loberman@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23i40iw: Enable level-1 PBL for fast memory registrationShiraz Saleem
Set the chunk_size to enable level-1 PBL support when the fast memory page count is more than one. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23i40iw: Return correct max_fast_reg_page_list_lenFaisal Latif
Return correct value for max_fast_reg_page_list_len from i40iw_query_device(). Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23i40iw: Correct status check on i40iw_get_pbleFaisal Latif
i40iw_get_pble returns 0 on success. Correct the check on return code. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23i40iw: Correct CQ armingShiraz Saleem
CQ is armed for solicited events only, ignoring other notification flags. Correct this by arming for next and arming for solicited event if IB_CQ_SOLICITED is set. Also protect CQ shadow area update with spinlock. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23IB/rdmavt: Correct qp_priv_alloc() return value testMike Marciniszyn
The current drivers return errors from this calldown wrapped in an ERR_PTR(). The rdmavt code incorrectly tests for NULL. The code is fixed to use IS_ERR() and change ret according to the driver return value. Cc: Stable <stable@vger.kernel.org> # 4.6+ Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23IB/hfi1: Don't zero out qp->s_ack_queue in rvt_reset_qpAshutosh Dixit
Since rvt_reset_qp already zero's out qp->s_ack_queue head and tail pointers, there is no need to zero out qp->s_ack_queue itself. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23IB/hfi1: Fix deadlock with txreq allocation slow pathMike Marciniszyn
A failure in the get_txreq() inline will result in a slow path retry using __get_txreq(). __get_txreq() attempts to procure the qp s_lock, which is already held in all callers. Fix by deleting the s_lock maintenance in __get_txreq() and add sparse syntax hooks to future proof the code. Cc: Stable <stable@vger.kernel.org> # 4.6+ Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23IB/mlx4: Prevent cross page boundary allocationChuck Lever
Prevent cross page boundary allocation by allocating new page, this is required to be aligned with ConnectX-3 HW requirements. Not doing that might cause to "RDMA read local protection" error. Fixes: 1b2cd0fc673c ('IB/mlx4: Support the new memory registration API') Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23IB/mlx4: Fix memory leak if QP creation failedDotan Barak
When RC, UC, or RAW QPs are created, a qp object is allocated (kzalloc). If at a later point (in procedure create_qp_common) the qp creation fails, this qp object must be freed. Fixes: 1ffeb2eb8be99 ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support") Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23IB/mlx4: Verify port number in flow steering create flowYishai Hadas
In procedure mlx4_ib_create_flow, passing an invalid port number will cause an out-of-bounds array access. Data passed to this procedure can come from user-space. Therefore, need to validate port number before proceeding onwards. Note that we check against the number of physical ports declared at the verbs (ib core) level; When bonding is active, the verbs level sees one physical port, even though the low-level driver sees two ports. Fixes: f77c0162a339 ("IB/mlx4: Add receive flow steering support") Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23IB/mlx4: Fix error flow when sending mads under SRIOVYishai Hadas
Fix mad send error flow to prevent double freeing address handles, and leaking tx_ring entries when SRIOV is active. If ib_mad_post_send fails, the address handle pointer in the tx_ring entry must be set to NULL (or there will be a double-free) and tx_tail must be incremented (or there will be a leak of tx_ring entries). The tx_ring is handled the same way in the send-completion handler. Fixes: 37bfc7c1e83f ("IB/mlx4: SR-IOV multiplex and demultiplex MADs") Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23IB/mlx4: Fix the SQ size of an RC QPYishai Hadas
When calculating the required size of an RC QP send queue, leave enough space for masked atomic operations, which require more space than "regular" atomic operation. Fixes: 6fa8f719844b ("IB/mlx4: Add support for masked atomic operations") Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Jack Morgenstein <jackm@mellanox.co.il> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23IB/mlx5: Fix wrong naming of port_rcv_data counterTalat Batheesh
port_xmit_data is written instead of port_rcv_data. Fixes: 3efd9a11212d ('IB/mlx5: Modify MAD reading counters method to use counter registers') Signed-off-by: Talat Batheesh <talatb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23IB/mlx5: Fix post send fence logicEli Cohen
If the caller specified IB_SEND_FENCE in the send flags of the work request and no previous work request stated that the successive one should be fenced, the work request would be executed without a fence. This could result in RDMA read or atomic operations failure due to a MR being invalidated. Fix this by adding the mlx5 enumeration for fencing RDMA/atomic operations and fix the logic to apply this. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23IB/uverbs: Initialize ib_qp_init_attr with zerosMaor Gottlieb
Initialize ib_qp_init_attr with zeros in order to avoid from garbage in fields that won't be set with user values. Fixes: a060b5629ab06 ('IB/core: generic RDMA READ/WRITE API') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23IB/core: Fix false search of the IB_SA_WELL_KNOWN_GUIDEli Cohen
When virtualziation is supported, VFs may send SA MADs to a GID formed by the concatenation of the subnet prefix with the IB_SA_WELL_KNOWN_GUID. When a response is required, the current code will search the local HCA's port for the received GID to figure out the GID index of the entry containing this GID. However, since this is not a real GID it will not be found and error will be printed. We change the logic to check if the destination GID is this special GID and avoid lookup in this case and use GID index 0. Fixes: a0c1b2a35087 ('IB/core: Support accessing SA in virtualized environment') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23IB/core: Fix RoCE v1 multicast join logic issueAlex Vesker
During multicast join of RoCEv1, IGMP join state and max hop limit were updated incorrectly. IGMP join should be sent and marked as joined only on RoCEv2 after a successful join. Max hops should be updated to the hop limit on RoCEv2 regardless of the join state. Fixes: bee3c3c91865 ('IB/cma: Join and leave multicast groups...') Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23IB/core: Fix no default GIDs when netdevice reregistersTalat Batheesh
Currently, when the netdevice returned by get_netdev is unregistered, we delete all GIDs (including the default GIDs) and reset their attributes. Therefore, when we re-register it, no default GIDs will be assigned (as their "default GID") attribute will be reset. Fixing this by keeping "default GID" attribute. Fixes: 03db3a2d81e6 ('IB/core: Add RoCE GID table management') Signed-off-by: Talat Batheesh <talatb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17IB/hfi1: Send a pkey change event on driver pkey updateSebastian Sanchez
Swapping a cable from a "Mgmt Allowed=No" switch port to a "Mgmt Allowed=Yes" switch port doesn't send a pkey change notification. Therefore, the link doesn't become active as the oib_utils layer uses an old pkey table cache. Fix by ensuring the pkey change notification is sent when the table is changed both explicitly by the FM and implicitly by the driver via a cable swap. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17IB/hfi1: Remove FULL_MGMT_P_KEY from pkey table at link upSebastian Sanchez
FULL_MGMT_P_KEY doesn't get cleared from the pkey table at link bounce because the link down and link bounce code paths are different when moving a QSFP cable on a switch. This causes an HFI unit connected to a switch to try to be initialized to an FM node when the QSFP cable is moved from a MgmtAllowed=NO port to a MgmtAllowed=YES port and back to a MgmtAllowed=NO port. Remove FULL_MGMT_P_KEY from pkey table at link up. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17IB/hfi1: Fix potential buffer overflowTadeusz Struk
This fixes potential buffer overflow because the sprintf function doesn't check buffer boundaries. Use snprintf instead. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17IB/hfi1: Fix potential NULL ptr dereferenceTadeusz Struk
This fixes potential NULL ptr dereference because IS_ERR(dd) doesn't handle NULL. Fix the issue by initializing the pointer with a not NULL error code. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17IB/qib: Prevent context lossIra Weiny
If a context has already been assigned to an FD, prevent another assignment. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17IB/hfi1: Prevent context lossIra Weiny
If a context has already been assigned to an FD, prevent another assignment. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17IB/hfi1: Increase packet egress timeoutJubin John
The current value of 500us for the packet egress timeout is too small which causes the host to declare failure on draining packets too early and unnecessarily bounces the link. Increase this to 50ms taking into account the switch packet discard timer default and the worst case per-VL package drainage rate. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17IB/rdmavt: Correct warning during QPN allocationBrian Welty
Correct calculation of the low order bits which should be unset based on use of qos_shift parameter when assigning QPN. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17IB/rdmavt: Correct required callback functions for MODIFY_QPBrian Welty
Functions required for MODIFY_PORT were incorrectly being required for MODIFY_QP. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17IB/hfi1: Fix credit return threshold adjustmentJubin John
The credit return threshold adjustment on mtu change algorithm does not take into account all the kernel send contexts that are assigned per VL. Use the pio send context map to adjust the credit return thresholds for all the allocated and assigned kernel send contexts based on the MTU adjustment per VL. The pio send context map can be changed dynamically based on the actual number of operational vls which is set by the fabric manager. When this happens update the credit return threshold values for all the remapped kernel send contexts. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17IB/cma: Make the code easier to verifyBart Van Assche
Static source code analysis tools like smatch cannot handle functions that lock or not lock a mutex depending on the value of the arguments. Hence inline the function cma_disable_callback(). Additionally, this patch realizes a small performance optimization by reducing the number of mutex_lock() and mutex_unlock() calls in the modified functions. With this patch applied smatch no longer complains about source file cma.c. Without this patch smatch reports the following for this source file: drivers/infiniband/core/cma.c:1959: cma_req_handler() warn: inconsistent returns 'mutex:&listen_id->handler_mutex'. Locked on: line 1880 line 1959 Unlocked on: line 1941 drivers/infiniband/core/cma.c:2112: iw_conn_req_handler() warn: inconsistent returns 'mutex:&listen_id->handler_mutex'. Locked on: line 2048 Unlocked on: line 2112 Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Leon Romanovsky <leonro@mellanox.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17IB/mlx4: Properly initialize GRH TClass and FlowLabel in AHsJason Gunthorpe
When this code was reworked for IBoE support the order of assignments for the sl_tclass_flowlabel got flipped around resulting in TClass & FlowLabel being permanently set to 0 in the packet headers. This breaks IB routers that rely on these headers, but only affects kernel users - libmlx4 does this properly for user space. Cc: stable@vger.kernel.org Fixes: fa417f7b520e ("IB/mlx4: Add support for IBoE") Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07IB/IPoIB: Don't update neigh validity for unresolved entriesErez Shitrit
ipoib_neigh_get unconditionally updates the "alive" variable member on any packet send. This prevents the neighbor garbage collection from cleaning out a dead neighbor entry if we are still queueing packets for it. If the queue for this neighbor is full, then don't update the alive timestamp. That way the neighbor can time out even if packets are still being queued as long as none of them are being sent. Fixes: b63b70d87741 ("IPoIB: Use a private hash table for path lookup in xmit path") Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07IB/mlx5: Fix alternate path codeAchiad Shochat
Userspace flag IBV_QP_ALT_PATH is supposed to set the alternate path including fields alt_pkey_index and alt_timeout. Added IB_QP_PKEY_INDEX and IB_QP_TIMEOUT to the attribute mask when calling mlx5_set_path for the alternate path to force setting the alt_pkey_index and alt_timeout values. Fixes: bf24481a3a7c4 ('IB/mlx5: Consider alternate path in pkey ...') Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07IB/mlx5: Fix pkey_index length in the QP path recordNoa Osherovich
Pkey index fields in the QP context path record are extended to 16 bits, as required by IB spec (version 1.3). This change affects all QP commands which include path records. To enable this change, moved the free adaptive routing flag bit (free_ar) to the most significant byte of the QP path record. Fixes: e126ba97dba9e ('mlx5: Add driver for Mellanox Connect-IB ...') Signed-off-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07IB/mlx5: Fix entries check in mlx5_ib_resize_cqNoa Osherovich
Verify that number of entries is less than device capability. Add an appropriate warning message for error flow. Fixes: bde51583f49b ('IB/mlx5: Add support for resize CQ') Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07IB/mlx5: Fix entries checks in mlx5_ib_create_cqNoa Osherovich
Number of entries shouldn't be greater than the device's max capability. This should be checked before rounding the entries number to power of two. Fixes: 51ee86a4af639 ('IB/mlx5: Fix check of number of entries...') Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07IB/mlx5: Check BlueFlame HCA supportNoa Osherovich
BlueFlame support is reported only for PFs when the HCA capability is on. Fixes: 938fe83c8dcbb ('net/mlx5_core: New device capabilities...') Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07IB/mlx5: Fix returned values of query QPNoa Osherovich
Some variables were not initialized properly: max_recv_wr, max_recv_sge, max_send_wr, qp_context and max_inline_data. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB...') Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07IB/mlx5: Limit query HCA clockNoa Osherovich
When PAGE_SIZE is larger than 4K, the user shouldn't be able to query the HCA core clock. This counter is within 4KB boundary and the user-space shall not read information that's after this boundary. Fixes: b368d7cb8ceb7 ('IB/mlx5: Add hca_core_clock_offset to...') Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07IB/mlx5: Fix FW version diaplay in sysfsEran Ben Elisha
Add a 4-digit padding to show FW version in proper format. Fixes: 9603b61de1eee ('mlx5: Move pci device handling from...') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07IB/mlx5: Return PORT_ERR in Active to Initializing tranisitionNoa Osherovich
FW port-change events are fired on Active <-> non Active port state transitions only. When the port state changes from Active to Initializing (Active -> Down -> Initializing), a single event is fired. The HCA transitions from Down to Initializing unless prevented from doing so, hence the driver should also propagate events when the port state is Initializing to consumers so they'll be aware that the port is no longer Active and act accordingly. Fixes: e126ba97dba9e ('mlx5: Add driver for Mellanox Connect-IB...') Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07IB/mlx5: Set flow steering capability bitMaor Gottlieb
Flow steering is supported by mlx5 device when the following features are supported by firmware: 1. NIC RX flow table. 2. Device has enough flow steering levels. 3. Atomic modification of flow table entry. 4. Flow tables chaining. To check if flow steering is supported it's enough to check if the driver opened the mlx5 bypass namespace. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07IB/core: Initialize sysfs attributes before sysfs create groupMark Bloch
For dynamically allocated sysfs attributes there is a need to call sysfs_attr_init in order to comply with lockdep, not calling it will result in error complaining key is not in .data section. Fixes: b40f4757daa1 ("IB/core: Make device counter infrastructure dynamic") Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07IB/IPoIB: Disable bottom half when dealing with device addressMark Bloch
Align locking usage when touching device address with rest of the kernel. Lock the bottom half when doing so using netif_addr_lock_bh. This also solves the following case as reported by lockdep: CPU0 CPU1 ---- ---- lock(_xmit_INFINIBAND); local_irq_disable(); lock(&(&mc->mca_lock)->rlock); lock(_xmit_INFINIBAND); <Interrupt> lock(&(&mc->mca_lock)->rlock); *** DEADLOCK *** Fixes: 492a7e67ff83 ("IB/IPoIB: Allow setting the device address") Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 17:33:24 +0000