summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-04-14iwlwifi: mvm: umac error table mismatchRoee Goldfiner
umac_error_table In TLV address was read using mask on MSB but on the same table in alive message it was without which caused mismatch in devices with different memory region MSB Signed-off-by: Roee Goldfiner <roee.h.goldfiner@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.179fee442115.Ib6eabe86cfda0b6044f07c07448c366b6e07e53d@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: queue: avoid memory leak in reset flowMordechay Goodstein
In case the device is stopped any usage of hw queues needs to be reallocated in fw due to fw reset after device stop, so all driver internal queue should also be freed, and if we don't free the next usage would leak the old memory and get in recover flows "iwlwifi 0000:00:03.0: dma_pool_destroy iwlwifi:bc" warning. Also warn about trying to reuse an internal allocated queue. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.c72d2f0355c4.Ia3baff633b9b9109f88ab379ef0303aa152c16bf@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: don't warn if we can't wait for empty tx queuesEmmanuel Grumbach
If the firmware is dead, the Tx queues won't drain, but leaving a print in the log is enough, no need to WARN. If the firmware is dead, we must already have printed enough information in the log anyway. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.9a438b2320a9.I4aa897178df82acefd80173d76dd6849ad1bcdc1@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: remove remaining software checksum codeJohannes Berg
After the removal of the software checksum code for the A-MSDU path that we had for testing, the csum_skb variable stuck around. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.280f268ae679.Iad455b6c91e427c9f74963bbd3eb0ce743aaac53@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: remove TCM eventsEmmanuel Grumbach
Nobody uses that in the user space. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.b6560a5de0cd.I5dac9c60faed7f48b06d352aa2d65bcf8142c2dc@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: Use IWL_INFO in fw_reset_handshake()Ravi Darsi
Debug message "firmware didn't ACK the reset - continue anyway\n" in fw_reset_handshake() is classified as error, however this is not an error as it is ignored. So, change it to info message for proper classification of debug messages. Signed-off-by: Ravi Darsi <ravi.darsi@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.449b3092c330.I515edcc41913ca7fbe4a4de923671d120d5618c6@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: refactor ACPI DSM evaluation functionHarish Mitty
Instead of implementing the DSM evaluation function in the MVM code, refactor it so it can be generalized and part of the common ACPI implementation. Signed-off-by: Harish Mitty <harish.mitty@intel.com> [reworded subject and commit message] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.a24af3551aac.I8e6bd5eb05f853b6331fa4823750f7ba8ffe46e6@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: support BIOS enable/disable for 11ax in UkraineMiri Korenblit
Read the new BIOS DSM and Pass to FW if to disable\enable 11ax for Ukraine according to the BIOS key. this is needed to enable OEMs to control enable/disable 11ax in Ukraine Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.055654e7707e.If7eaf9839cd5d59729a235df07e31668b408e740@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: move iwl_configure_rxq to be used by other op_modesMordechay Goodstein
All the op_modes need to send this command as well. Instead of duplicating the code from mvm, put the code in a common place. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.deb71fce883a.I5eef009512f180e5974f3f491ff56c763cdcc878@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: add new so-gf deviceybaruch
add new so-gf device to the driver. Signed-off-by: ybaruch <yaara.baruch@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.d6b0c1f85a7e.I2098ca066607edc48336021ea2e5afdbf8196acf@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: enable PPAG in ChinaMiri Korenblit
Add support for ppag in China by reading revision 2 of the ppag table from ACPI, and passing the data to the FW. This is needed to enable OEMs to control ppag enablement in China. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.69af388d0dce.I8cfddf9e6837bf394b00390181b4b774ded19acd@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: Add support for 6GHz passive scanIlan Peer
When doing scan while 6GHz channels are not enabled, the 6GHz band is not scanned. Thus, if there are no APs on the 2GHz and 5GHz bands (that will allow discovery of geographic location etc. that would allow enabling the 6GHz channels) but there are non collocated APs on 6GHz PSC channels these would never be discovered. To overcome this, FW added support for performing passive UHB scan in case no APs were discovered during scan on the 2GHz and 5GHz channels. Add support for enabling such scan when the following conditions are met: - 6GHz channels are supported but not enabled by regulatory. - Station interface is not associated or less than a defined time interval passed from the last resume or HW reset flows. - At least 4 channels are included in the scan request - The scan request includes the widlcard SSID. - At least 50 minutes passed from the last 6GHz passive scan. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.7c7bd00e0aeb.Ib226ad57e416b43a710c36a78a617d4243458b99@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: add ax201 killer deviceybaruch
add new killer devices configurations. Signed-off-by: ybaruch <yaara.baruch@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.54967363d26d.I5d1a3d810cf6abace51ebb2630d62d891e9fd302@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: when associated with PMF, use protected NDP ranging negotiationAvraham Stern
When associated to the resonder with PMF, request to protect the NDP ranging negotiation with PMF. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.e7982c72e12b.Ib6db362d01a31132c638e194d49476cd8e3ff430@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: clean up queue sync implementationJohannes Berg
When we do queue sync, it's confusing that we have the structures declared in the FW API header files that aren't really firmware, and the union is also confusing - especially now in the code that checks the size on the return. So rework this: change the type of sync and whether to do it in a synchronous fashion to arguments, and build the data structure in the function, so we don't need the union. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.f62833fd9893.I612d7ac1c655ec4880329360e15d207698c750bc@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: write queue_sync_state only for syncJohannes Berg
We use mvm->queue_sync_state to wait for synchronous queue sync messages, but if an async one happens inbetween we shouldn't clear mvm->queue_sync_state after sending the async one, that can run concurrently (at least from the CPU POV) with another synchronous queue sync. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.d11c9bcdb4aa.I0772171dbaec87433a11513e9586d98b5d920b5f@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: responder: support responder config command version 8Avraham Stern
Version 8 add NDP ranging parameters configuration, as well as enable/disable NDP ranging and LMR feedback. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210330162204.ce9570d755d3.Ic81cb8da9aecbbc9edff468cb4ffbb741418cc73@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: support range request command version 12Avraham Stern
Version 12 adds configuration of NDP ranging parameters: - max number of LTF repetitions - max number of spatial streams - max total LTFs Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210330162204.2c30c376c5cf.I01460f7277594ee7c98a8e1fe5447c59e70bf073@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: pcie: make cfg vs. trans_cfg more robustJohannes Berg
If we (for example) have a trans_cfg entry in the PCI IDs table, but then don't find a full cfg entry for it in the info table, we fall through to the code that treats the PCI ID table entry as a full cfg entry. This obviously causes crashes later, e.g. when trying to build the firmware name string. Avoid such crashes by using the low bit of the pointer as a tag for trans_cfg entries (automatically using a macro that checks the type when assigning) and then checking that before trying to use the data as a full entry - if it's just a partial entry at that point, fail. Since we're adding some macro magic, also check that the type is in fact either struct iwl_cfg_trans_params or struct iwl_cfg, failing compilation ("initializer element is not constant") if it isn't. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210330162204.6f69fe6e4128.I921d4ae20ef5276716baeeeda0b001cf25b9b968@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: pcie: clear only FH bits handle in the interruptMordechay Goodstein
For simplicity we assume that msix has 2 IRQ lines one used for rx data called msix_non_share, and another used for one bit flags messages (alive, hw error, sw error, rx data flag) called msix_share. Every time the FW has data to send it puts it on the RX queue and HW turns on the flags in msix_share (inta_fw) indicating about rx data, and HW sends an interrupt a bit later to the msix_non_share _unless_ the msix_shared RX data bit was cleared. Currently in the code every time we get an msix_shared we clear all bits including rx data queue bits. So we can have a race ---------------------------------------------------- DRIVER | HW | FW ---------------------------------------------------- - send host cmd to FW | | | | - handle message | | and put a response | | on the RX queue | - RX flag on | | | - send alive msix | - alive flag on | | - interrupt | | msix_share driver | - handle msix_shared | | and clear all flags | | bits | | | - don't send an | | interrupt on | | msix_non_shared | | (driver cleared) | - driver timeout on | | waiting for host cmd | | respond | | | | ---------------------------------------------------- The change is to clear only the msi_shared flags that are handled in the msix_shared flow, which will cause the hardware to send an interrupt on the msix_non_share line as well, when it has data. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210330162204.a1cdda2fa270.I02a82312679f4541f30bb8db8747a797dbb70ee7@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: add 160Mhz to killer 1550 nameybaruch
change the name of 1550 killer device to 160Mhz. Signed-off-by: ybaruch <yaara.baruch@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210330162204.b87618a26ff8.Icf1d9c150ec108f30ce0e72c18b9350da6ae5087@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: change name to AX 211 and 411 familyybaruch
change the name of the ax211 and ax411. Signed-off-by: ybaruch <yaara.baruch@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210330162204.fc3218805052.I203f1a802338f59955bd511c90217f63b918390b@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: change step in so-gf structybaruch
change the step of iwlax210_2ax_cfg_so_jf_a0 to iwlax210_2ax_cfg_so_jf_b0 as it is on the wcd_fw-dev repository. Signed-off-by: ybaruch <yaara.baruch@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210330162204.e9a9d1da76bc.Ie964f37872bbb88d1a02094134f9a2c38faad884@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: pcie: Add support for Bz FamilyMatti Gottlieb
Add support for different combinations of Bz and CRFs. Note: As of now we do not know the exact values for ltr_delay and xtal_latency, so for now use the worst case scenario values until the actual values are clarified. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210330162204.caac8d996532.I6a22d6decb106cd50d7954b19236b69d685dcc39@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: don't allow CSA if we haven't been fully associatedEmmanuel Grumbach
"Fully associated" means that we heard a beacon with the DTIM information and the firmware is configured to track the beacons. Since the firmware needs to track the beacons for the CSA, we can't configure the firmware for CSA before it knows when the beacons are expected otherwise we'd get ASSERT 301D. If we are required to start CSA before we told the firmware when the beacons are expected to arrive, just report a failure and let mac80211 disconnect. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210330162204.9adaedeb59e4.Idaad6aaf3f9759d023b8e00b10064915c0db9aa3@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: pcie: normally grab NIC access for inflight-hcmdJohannes Berg
We currently have a special, separate, code path to acquire NIC access for the in-flight host-command workaround on 7000 series hardware. However, the normal code path here has grown a number of additional workarounds/semantics over time, such as reprobing the device if things fail. Rather than try to replicate any of this logic, call the normal grab_nic_access logic for the workaround. This changes the spinlock to _bh, but that's OK since it's just redundant, we already have soft-IRQs disabled when we get here, and so didn't (have to) do it again. Since it's only for commands there's however no point in making the code more complex just to not use _bh here. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210330162204.d196fc6ffb23.Idc1ce3ce9fed9178beee7e5409bc669f79b06a0d@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: pcie: avoid unnecessarily taking spinlockJohannes Berg
Most devices don't set the apmg_wake_up_wa flag, so we don't do anything for them. Avoid taking the spinlock for every command unless the device needs this workaround. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210330162204.1ab60af3f318.I51cc202f68a2a953223e70c3e8610343412961b6@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: enable TX on new CSA channel before disconnectingSara Sharon
When moving to the new channel, we block TX until we hear the first beacon. if it is not heard, we proceed to disconnect. Since TX is blocked (without mac80211 being aware of it) the frame is stuck, resulting with queue hang. Instead, reenable TX before reporting on the connection loss. As we are on the new channel, there is no problem with that, even if the original CSA had quiet mode. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210330162204.eb4f2ff1b863.Ib16238106b33d58b2b7688dc6297018b915ecef4@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14can: etas_es58x: fix null pointer dereference when handling error framesVincent Mailhol
During the handling of CAN bus errors, a CAN error SKB is allocated using alloc_can_err_skb(). Even if the allocation of the SKB fails, the function continues in order to do the stats handling. All access to the can_frame pointer (cf) should be guarded by an if statement: if (cf) However, the increment of the rx_bytes stats: netdev->stats.rx_bytes += cf->can_dlc; dereferences the cf pointer and was not guarded by an if condition leading to a NULL pointer dereference if the can_err_skb() function failed. Replacing the cf->can_dlc by the macro CAN_ERR_DLC (which is the length of any CAN error frames) solves this NULL pointer dereference. Fixes: 8537257874e9 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces") Link: https://lore.kernel.org/r/20210413114242.2760-1-mailhol.vincent@wanadoo.fr Reported-by: Arunachalam Santhanam <arunachalam.santhanam@in.bosch.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-13net: ethernet: intel: Fix a typo in the file ixgbe_dcb_nl.cBhaskar Chowdhury
s/Reprogam/Reprogram/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-13net: intel: Remove unused function pointer typedef ixgbe_mc_addr_itrChen Lin
Remove the 'ixgbe_mc_addr_itr' typedef as it is not used. Signed-off-by: Chen Lin <chen.lin5@zte.com.cn> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-13ixgbe: Support external GBE SerDes PHY BCM54616sJostar Yang
The Broadcom PHY is used in switches, so add the ID, and hook it up. This upstreams the Linux kernel patch from the network operating system SONiC from February 2020 [1]. [1]: https://github.com/Azure/sonic-linux-kernel/pull/122 Signed-off-by: Jostar Yang <jostar_yang@accton.com> Signed-off-by: Guohan Lu <lguohan@gmail.com> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-13net: Space: remove hp100 probeArnd Bergmann
The driver was removed last year, but the static initialization got left behind by accident. Fixes: a10079c66290 ("staging: remove hp100 driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13dpaa2-switch: reuse dpaa2_switch_acl_entry_add() for STP frames trapIoana Ciornei
Since we added the dpaa2_switch_acl_entry_add() function in the previous patches to hide all the details of actually adding the ACL entry by issuing a firmware command, let's use it also for adding a CPU trap for the STP frames. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13dpaa2-switch: add tc matchall filter supportIoana Ciornei
Add support TC_SETUP_CLSMATCHALL by using the same ACL table entries framework as for tc flower. Adding a matchall rule is done by installing an entry which has a mask of all zeroes, thus matching on any packet. This can be used as a catch-all type of rule if used correctly, ie the priority of the matchall filter should be kept as the lowest one in the entire filter block. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13dpaa2-switch: add tc flower hardware offload on ingress trafficIoana Ciornei
This patch adds support for tc flower hardware offload on the ingress path. Shared filter blocks are supported by sharing a single ACL table between multiple ports. The following flow keys are supported: - Ethernet: dst_mac/src_mac - IPv4: dst_ip/src_ip/ip_proto/tos - VLAN: vlan_id/vlan_prio/vlan_tpid/vlan_dei - L4: dst_port/src_port As per flow actions, the following are supported: - drop - mirred egress redirect - trap Each ACL entry (filter) can be setup with only one of the listed actions. A sorted single linked list is used to keep the ACL entries by their order of priority. When adding a new filter, this enables us to quickly ascertain if the new entry has the highest priority of the entire block or if we should make some space in the ACL table by increasing the priority of the filters already in the table. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13dpaa2-switch: install default STP trap rule with the highest priorityIoana Ciornei
Change the default ACL trap rule for STP frames to have the highest priority. In the same ACL table will reside both default rules added by the driver for its internal use as well as rules added with tc flower. In this case, the default rules such as the STP one that we already have should have the highest priority. Also, remove the check for a full ACL table since we already know that it's sized so that we don't hit this case. The last thing changes is that default trap filters will not be counted in the acl_tbl's num_rules variable since their number doesn't change. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13dpaa2-switch: create a central dpaa2_switch_acl_tbl structureIoana Ciornei
Introduce a new structure - dpaa2_switch_acl_tbl - to hold all data related to an ACL table: number of rules added, ACL table id, etc. This will be used more in the next patches when adding support for sharing an ACL table between ports. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13ionic: return -EFAULT if copy_to_user() failsDan Carpenter
The copy_to_user() function returns the number of bytes that it wasn't able to copy. We want to return -EFAULT to the user. Fixes: fee6efce565d ("ionic: add hw timestamp support files") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13net: stmmac: Add TX via XDP zero-copy socketOng Boon Leong
We add the support of XDP ZC TX submission and cleaning into stmmac_tx_clean(). The function is made to clean as many TX complete frames as possible, i.e. limit by priv->dma_tx_size instead of NAPI budget. For TX ring that is associated with XSK pool, the function stmmac_xdp_xmit_zc() is introduced to TX frame buffers from XSK pool by using xsk_tx_peek_desc(). To make stmmac_tx_clean() support the cleaning of XSK TX frames, STMMAC_TXBUF_T_XSK_TX TX buffer type is introduced. As stmmac_tx_clean() uses the return value to cue whether NAPI function should continue to poll, we augment the caller of stmmac_tx_clean() to pass NAPI budget instead of priv->dma_tx_size through 'budget' input and made stmmac_tx_clean() to always clean up-to the TX ring size instead. This allows us to use the return boolean status of stmmac_xdp_xmit_zc() to decide if XSK TX work is done or not: If true, set 'xmits' to return 'budget - 1' so that NAPI poll may exit. Else, set 'xmits' to return 'budget' to make NAPI poll continue to poll since XSK TX work is not done. Finally, at the end of stmmac_tx_clean(), the function now take a maximum value between 'count' and 'xmits' so that status from both TX cleaning and XSK TX (only for XDP ZC) is considered. This patch adds a new NAPI poll called stmmac_napi_poll_rxtx() that is meant to be enabled/disabled for RX and TX ring that are bound to XSK pool. This NAPI poll function starts with cleaning TX ring, then submits XSK TX frames to TX ring before proceed to perform RX operations, i.e. , receiving RX frames and replenishing RX ring with RX free buffers obtained from XSK pool. Therefore, during XSK RX and TX setup, the driver enables stmmac_napi_poll_rxtx() for RX and TX operations, then during XSK RX and TX pool tear-down, the driver reenables the exisiting independent NAPI poll functions accordingly: stmmac_napi_poll_rx() and stmmac_napi_poll_tx(). Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13net: stmmac: Enable RX via AF_XDP zero-copyOng Boon Leong
This patch adds the support for receiving packet via AF_XDP zero-copy mechanism. XDP ZC uses 1:1 mapping of XDP buffer to receive packet, therefore the use of split header is not used currently. The 'xdp_buff' is declared as union together with a struct that contains 'page', 'addr' and 'page_offset' that are associated with primary buffer. RX buffers are now allocated either via page_pool or xsk pool. For RX buffers from xsk_pool they are allocated and deallocated using below functions: * stmmac_alloc_rx_buffers_zc(struct stmmac_priv *priv, u32 queue) * dma_free_rx_xskbufs(struct stmmac_priv *priv, u32 queue) With above functions now available, we then extend the following driver functions to support XDP ZC: * stmmac_reinit_rx_buffers() * __init_dma_rx_desc_rings() * init_dma_rx_desc_rings() * __free_dma_rx_desc_resources() Note: stmmac_alloc_rx_buffers_zc() may return -ENOMEM due to RX XDP buffer pool is not allocated (e.g. samples/bpf/xdpsock TX-only). But, it is still ok to let TX XDP ZC to continue, therefore, the -ENOMEM is silently ignored to let the driver succcessfully transition to XDP ZC mode for the said RX and TX queue. As XDP ZC buffer size is different, the DMA buffer size is required to be reprogrammed accordingly for RX DMA/Queue that is populated with XDP buffer from XSK pool. Next, to add or remove per-queue XSK pool, stmmac_xdp_setup_pool() will call stmmac_xdp_enable_pool() or stmmac_xdp_disable_pool() that in-turn coordinates the tearing down and setting up RX ring via RX buffers and descriptors removal and reallocation through stmmac_disable_rx_queue() and stmmac_enable_rx_queue(). In addition, stmmac_xsk_wakeup() is added to initiate XDP RX buffer replenishing by signalling user application to add available XDP frames back to FILL queue. For RX processing using XDP zero-copy buffer, stmmac_rx_zc() is introduced which is implemented with the assumption that RX split header is disabled. For XDP verdict is XDP_PASS, the XDP buffer is copied into a sk_buff allocated through stmmac_construct_skb_zc() and sent to Linux network GRO inside stmmac_dispatch_skb_zc(). Free RX buffers are then replenished using stmmac_rx_refill_zc() v2: introduce __stmmac_disable_all_queues() to contain the original code that does napi_disable() and then make stmmac_setup_tc_block_cb() to use it. Move synchronize_rcu() into stmmac_disable_all_queues() that eventually calls __stmmac_disable_all_queues(). Then, make both stmmac_release() and stmmac_suspend() to use stmmac_disable_all_queues(). Thanks David Miller for spotting the synchronize_rcu() issue in v1 patch. Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13net: stmmac: Refactor __stmmac_xdp_run_prog for XDP ZCOng Boon Leong
Prepare stmmac_xdp_run_prog() for AF_XDP zero-copy support which will be added by upcoming patches by splitting out the XDP verdict processing into __stmmac_xdp_run_prog() and it callable for XDP ZC path which does not need to verify bpf_prog is not NULL. The stmmac_xdp_run_prog() is used for regular XDP Rx path which requires bpf_prog to be verified. Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13net: stmmac: rearrange RX and TX desc init into per-queue basisOng Boon Leong
Below functions are made to be per-queue in preparation of XDP ZC: __init_dma_rx_desc_rings(struct stmmac_priv *priv, u32 queue, gfp_t flags) __init_dma_tx_desc_rings(struct stmmac_priv *priv, u32 queue) The original functions below are stay maintained for all queue usage: init_dma_rx_desc_rings(struct net_device *dev, gfp_t flags) init_dma_tx_desc_rings(struct net_device *dev) Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13net: stmmac: refactor stmmac_init_rx_buffers for stmmac_reinit_rx_buffersOng Boon Leong
The per-queue RX buffer allocation in stmmac_reinit_rx_buffers() can be made to use stmmac_alloc_rx_buffers() by merging the page_pool alloc checks for "buf->page" and "buf->sec_page" in stmmac_init_rx_buffers(). This is in preparation for XSK pool allocation later. Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13net: stmmac: introduce dma_recycle_rx_skbufs for stmmac_reinit_rx_buffersOng Boon Leong
Rearrange RX buffer page_pool recycling logics into dma_recycle_rx_skbufs, so that we prepare stmmac_reinit_rx_buffers() for XSK pool expansion. Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13net: stmmac: rearrange RX buffer allocation and free functionsOng Boon Leong
This patch restructures the per RX queue buffer allocation from page_pool to stmmac_alloc_rx_buffers(). We also rearrange dma_free_rx_skbufs() so that it can be used in init_dma_rx_desc_rings() during freeing of RX buffer in the event of page_pool allocation failure to replace the more efficient method earlier. The replacement is needed to make the RX buffer alloc and free method scalable to XDP ZC xsk_pool alloc and free later. Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13net: ipa: add IPA v4.9 configuration dataAlex Elder
Add support for the SM8350 SoC, which includes IPA version 4.9. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13ionic: git_ts_info bit shiftersShannon Nelson
All the uses of HWTSTAMP_FILTER_* values need to be bit shifters, not straight values. v2: fixed subject and added Cc Dan and SoB Allen Fixes: f8ba81da73fc ("ionic: add ethtool support for PTP") Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Allen Hubbe <allenbh@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13ibmvnic: queue reset work in system_long_wqLijun Pan
The reset process for ibmvnic commonly takes multiple seconds, clearly making it inappropriate for schedule_work/system_wq. The reason to make this change is that ibmvnic's use of the default system-wide workqueue for a relatively long-running work item can negatively affect other workqueue users. So, queue the relatively slow reset job to the system_long_wq. Suggested-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13Merge tag 'linux-can-next-for-5.13-20210413' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2021-04-13 this is a pull request of 14 patches for net-next/master. The first patch is by Yoshihiro Shimoda and updates the DT bindings for the rcar_can driver. Vincent Mailhol contributes 3 patches that add support for several ETAS USB CAN adapters. The final 10 patches are by me and clean up the peak_usb CAN driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 01:46:37 +0000