summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-12-21Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The core framework got some nice improvements this time around. We gained the ability to get struct clk pointers from a struct clk_hw so that clk providers can consume the clks they provide, if they need to do something like that. This has been a long missing part of the clk provider API that will help us move away from exposing a struct clk pointer in the struct clk_hw. Tracepoints are added for the clk_set_rate() "range" functions, similar to the tracepoints we already have for clk_set_rate() and we added a column to debugfs to help developers understand the hardware enable state of clks in case firmware or bootloader state is different than what is expected. Overall the core changes are mostly improving the clk driver writing experience. At the driver level, we have the usual collection of driver updates and new drivers for new SoCs. This time around the Qualcomm folks introduced a good handful of clk drivers for various parts of three or four SoCs. The SiFive folks added a new clk driver for their FU740 SoCs, coming in second on the diffstat and then Atmel AT91 and Amlogic SoCs had lots of work done after that for various new features. One last thing to note in the driver area is that the i.MX driver has gained a new binding to support SCU clks after being on the list for many months. It uses a two cell binding which is sort of rare in clk DT bindings. Beyond that we have the usual set of driver fixes and tweaks that come from more testing and finding out that some configuration was wrong or that a driver could support being built as a module. Summary: Core: - Add some trace points for clk_set_rate() "range" functions - Add hardware enable information to clk_summary debugfs - Replace clk-provider.h with of_clk.h when possible - Add devm variant of clk_notifier_register() - Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw New Drivers: - Bindings for Canaan K210 SoC clks - Support for SiFive FU740 PRCI - Camera clks on Qualcomm SC7180 SoCs - GCC and RPMh clks on Qualcomm SDX55 SoCs - RPMh clks on Qualcomm SM8350 SoCs - LPASS clks on Qualcomm SM8250 SoCs Updates: - DVFS support for AT91 clk driver - Update git repo branch for Renesas clock drivers - Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U - Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E - Stop using __raw_*() I/O accessors in Renesas clk drivers - One more conversion of DT bindings to json-schema - Make i.MX clk-gate2 driver more flexible - New two cell binding for i.MX SCU clks - Drop of_match_ptr() in i.MX8 clk drivers - Add arch dependencies for Rockchip clk drivers - Fix i2s on Rockchip rk3066 - Add MIPI DSI clks on Amlogic axg and g12 SoCs - Support modular builds of Amlogic clk drivers - Fix an Amlogic Video PLL clock dependency - Samsung Kconfig dependencies updates for better compile test coverage - Refactoring of the Samsung PLL clocks driver - Small Tegra driver cleanups - Minor fixes to Ingenic and VC5 clk drivers - Cleanup patches to remove unused variables and plug memory leaks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) dt-binding: clock: Document canaan,k210-clk bindings dt-bindings: Add Canaan vendor prefix clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts" clk: ingenic: Fix divider calculation with div tables clk: sunxi-ng: Make sure divider tables have sentinel clk: s2mps11: Fix a resource leak in error handling paths in the probe function clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9 clk: si5351: Wait for bit clear after PLL reset clk: at91: sam9x60: remove atmel,osc-bypass support clk: at91: sama7g5: register cpu clock clk: at91: clk-master: re-factor master clock clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz clk: at91: sama7g5: decrease lower limit for MCK0 rate clk: at91: sama7g5: remove mck0 from parent list of other clocks clk: at91: clk-sam9x60-pll: allow runtime changes for pll clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics clk: at91: clk-master: add 5th divisor for mck master clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT dt-bindings: clock: at91: add sama7g5 pll defines clk: at91: sama7g5: fix compilation error ...
2020-12-20Merge branches 'clk-ingenic', 'clk-vc5', 'clk-cleanup', 'clk-canaan' and ↵Stephen Boyd
'clk-marvell' into clk-next - Bindings for Canaan K210 SoC clks * clk-ingenic: clk: ingenic: Fix divider calculation with div tables * clk-vc5: clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts" * clk-cleanup: clk: sunxi-ng: Make sure divider tables have sentinel clk: s2mps11: Fix a resource leak in error handling paths in the probe function clk: bcm: dvp: Add MODULE_DEVICE_TABLE() clk: bcm: dvp: drop a variable that is assigned to only * clk-canaan: dt-binding: clock: Document canaan,k210-clk bindings dt-bindings: Add Canaan vendor prefix * clk-marvell: clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9
2020-12-20Merge branches 'clk-ti', 'clk-analog', 'clk-trace', 'clk-at91' and ↵Stephen Boyd
'clk-silabs' into clk-next - Add some trace points for clk_set_rate() "range" functions - DVFS support for AT91 clk driver * clk-ti: clk: ti: omap5: Fix reboot DPLL lock failure when using ABE TIMERs clk: ti: Fix memleak in ti_fapll_synth_setup * clk-analog: clk: axi-clkgen: move the OF table at the bottom of the file clk: axi-clkgen: wrap limits in a struct and keep copy on the state object dt-bindings: clock: adi,axi-clkgen: convert old binding to yaml format * clk-trace: clk: Trace clk_set_rate() "range" functions * clk-at91: clk: at91: sam9x60: remove atmel,osc-bypass support clk: at91: sama7g5: register cpu clock clk: at91: clk-master: re-factor master clock clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz clk: at91: sama7g5: decrease lower limit for MCK0 rate clk: at91: sama7g5: remove mck0 from parent list of other clocks clk: at91: clk-sam9x60-pll: allow runtime changes for pll clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics clk: at91: clk-master: add 5th divisor for mck master clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT dt-bindings: clock: at91: add sama7g5 pll defines clk: at91: sama7g5: fix compilation error * clk-silabs: clk: si5351: Wait for bit clear after PLL reset
2020-12-20Merge branches 'clk-tegra', 'clk-imx', 'clk-sifive', 'clk-mediatek' and ↵Stephen Boyd
'clk-summary' into clk-next - Support for SiFive FU740 PRCI - Add hardware enable information to clk_summary debugfs * clk-tegra: clk: tegra: Fix duplicated SE clock entry clk: tegra: bpmp: Clamp clock rates on requests clk: tegra: Do not return 0 on failure * clk-imx: (24 commits) clk: imx: scu: remove the calling of device_is_bound clk: imx: scu: Make pd_np with static keyword clk: imx8mq: drop of_match_ptr from of_device_id table clk: imx8mp: drop of_match_ptr from of_device_id table clk: imx8mn: drop of_match_ptr from of_device_id table clk: imx8mm: drop of_match_ptr from of_device_id table clk: imx: gate2: Remove unused variable ret clk: imx: gate2: Add locking in is_enabled op clk: imx: gate2: Add cgr_mask for more flexible number of control bits clk: imx: gate2: Check if clock is enabled against cgr_val clk: imx: gate2: Keep the register writing in on place clk: imx: gate2: Remove the IMX_CLK_GATE2_SINGLE_BIT special case clk: imx: scu: fix build break when compiled as modules clk: imx: remove redundant assignment to pointer np clk: imx: remove unneeded semicolon clk: imx: lpcg: add suspend/resume support clk: imx: clk-imx8qxp-lpcg: add runtime pm support clk: imx: lpcg: allow lpcg clk to take device pointer clk: imx: imx8qxp-lpcg: add parsing clocks from device tree clk: imx: scu: add suspend/resume support ... * clk-sifive: clk: sifive: Add clock enable and disable ops clk: sifive: Fix the wrong bit field shift clk: sifive: Add a driver for the SiFive FU740 PRCI IP block clk: sifive: Use common name for prci configuration clk: sifive: Extract prci core to common base dt-bindings: fu740: prci: add YAML documentation for the FU740 PRCI * clk-mediatek: clk: mediatek: Make mtk_clk_register_mux() a static function * clk-summary: clk: Add hardware-enable column to clk summary
2020-12-20Merge branches 'clk-amlogic', 'clk-rockchip', 'clk-of', 'clk-freescale' and ↵Stephen Boyd
'clk-unused' into clk-next - Replace clk-provider.h with of_clk.h when possible * clk-amlogic: clk: meson: g12a: add MIPI DSI Host Pixel Clock dt-bindings: clk: g12a-clkc: add DSI Pixel clock bindings clk: meson: enable building as modules clk: meson: Kconfig: fix dependency for G12A clk: meson: axg: add MIPI DSI Host clock clk: meson: axg: add Video Clocks dt-bindings: clk: axg-clkc: add MIPI DSI Host clock binding dt-bindings: clk: axg-clkc: add Video Clocks * clk-rockchip: clk: rockchip: fix i2s gate bits on rk3066 and rk3188 clk: rockchip: add CLK_SET_RATE_PARENT to sclk for rk3066a i2s and uart clocks clk: rockchip: Remove redundant null check before clk_prepare_enable clk: rockchip: Add appropriate arch dependencies * clk-of: xtensa: Replace <linux/clk-provider.h> by <linux/of_clk.h> sh: boards: Replace <linux/clk-provider.h> by <linux/of_clk.h> * clk-freescale: clk: fsl-flexspi: new driver dt-bindings: clock: document the fsl-flexspi-clk device clk: divider: add devm_clk_hw_register_divider_table() clk: qoriq: provide constants for the type clk: fsl-sai: use devm_clk_hw_register_composite_pdata() clk: composite: add devm_clk_hw_register_composite_pdata() clk: fsl-sai: fix memory leak clk: qoriq: Add platform dependencies * clk-unused: clk: scpi: mark scpi_clk_match as maybe unused clk: pwm: drop of_match_ptr from of_device_id table
2020-12-20Merge branches 'clk-doc', 'clk-qcom', 'clk-simplify', 'clk-hw', ↵Stephen Boyd
'clk-renesas' and 'clk-samsung' into clk-next - Camera clks on Qualcomm SC7180 SoCs - GCC and RPMh clks on Qualcomm SDX55 SoCs - RPMh clks on Qualcomm SM8350 SoCs - LPASS clks on Qualcomm SM8250 SoCs - Add devm variant of clk_notifier_register() - Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw * clk-doc: clk: fix a kernel-doc markup * clk-qcom: (27 commits) clk: qcom: rpmh: add support for SM8350 rpmh clocks dt-bindings: clock: Add RPMHCC bindings for SM8350 clk: qcom: lpasscc: Introduce pm autosuspend for SC7180 clk: qcom: gcc-sc7180: Add 50 MHz clock rate for SDC2 clk: qcom: gcc-sc7180: Use floor ops for sdcc clks clk: qcom: Add GDSC support for SDX55 GCC dt-bindings: clock: Add GDSC in SDX55 GCC clk: qcom: Add support for SDX55 RPMh clocks dt-bindings: clock: Introduce RPMHCC bindings for SDX55 clk: qcom: Add SDX55 GCC support dt-bindings: clock: Add SDX55 GCC clock bindings clk: qcom: Kconfig: Fix spelling mistake "dyanmic" -> "dynamic" clk: qcom: rpmh: Add CE clock on sdm845. dt-bindings: clock: Add entry for crypto engine RPMH clock resource clk: qcom: dispcc-sm8250: handle MMCX power domain clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones clk: qcom: lpass-sc7180: Clean up on error in lpass_sc7180_init() clk: qcom: Add support to LPASS AON_CC Glitch Free Mux clocks clk: qcom: Add support to LPASS AUDIO_CC Glitch Free Mux clocks dt-bindings: clock: Add support for LPASS Always ON Controller ... * clk-simplify: clk: remove unneeded dead-store initialization * clk-hw: clk: meson: g12: use devm variant to register notifiers clk: add devm variant of clk_notifier_register clk: meson: g12: drop use of __clk_lookup() clk: add api to get clk consumer from clk_hw clk: avoid devm_clk_release name clash * clk-renesas: dt-bindings: clock: renesas: rcar-usb2-clock-sel: Convert bindings to json-schema clk: renesas: sh73a0: Stop using __raw_*() I/O accessors clk: renesas: r8a774c0: Add RPC clocks clk: renesas: r8a779a0: Fix R and OSC clocks clk: renesas: cpg-mssr: fix kerneldoc of cpg_mssr_priv clk: renesas: rcar-usb2-clock-sel: Replace devm_reset_control_array_get() clk: renesas: r8a774b1: Add RPC clocks clk: renesas: r8a774a1: Add RPC clocks clk: renesas: r8a779a0: Add VIN clocks clk: renesas: r8a779a0: Add CSI4[0-3] clocks MAINTAINERS: Update git repo for Renesas clock drivers clk: renesas: r8a779a0: Make rcar_r8a779a0_cpg_clk_register() static clk: renesas: rcar-gen3: Remove stp_ck handling for SDHI * clk-samsung: clk: samsung: Prevent potential endless loop in the PLL ops clk: samsung: Allow compile testing of Exynos, S3C64xx and S5Pv210
2020-12-20Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "Much x86 work was pushed out to 5.12, but ARM more than made up for it. ARM: - PSCI relay at EL2 when "protected KVM" is enabled - New exception injection code - Simplification of AArch32 system register handling - Fix PMU accesses when no PMU is enabled - Expose CSV3 on non-Meltdown hosts - Cache hierarchy discovery fixes - PV steal-time cleanups - Allow function pointers at EL2 - Various host EL2 entry cleanups - Simplification of the EL2 vector allocation s390: - memcg accouting for s390 specific parts of kvm and gmap - selftest for diag318 - new kvm_stat for when async_pf falls back to sync x86: - Tracepoints for the new pagetable code from 5.10 - Catch VFIO and KVM irqfd events before userspace - Reporting dirty pages to userspace with a ring buffer - SEV-ES host support - Nested VMX support for wait-for-SIPI activity state - New feature flag (AVX512 FP16) - New system ioctl to report Hyper-V-compatible paravirtualization features Generic: - Selftest improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits) KVM: SVM: fix 32-bit compilation KVM: SVM: Add AP_JUMP_TABLE support in prep for AP booting KVM: SVM: Provide support to launch and run an SEV-ES guest KVM: SVM: Provide an updated VMRUN invocation for SEV-ES guests KVM: SVM: Provide support for SEV-ES vCPU loading KVM: SVM: Provide support for SEV-ES vCPU creation/loading KVM: SVM: Update ASID allocation to support SEV-ES guests KVM: SVM: Set the encryption mask for the SVM host save area KVM: SVM: Add NMI support for an SEV-ES guest KVM: SVM: Guest FPU state save/restore not needed for SEV-ES guest KVM: SVM: Do not report support for SMM for an SEV-ES guest KVM: x86: Update __get_sregs() / __set_sregs() to support SEV-ES KVM: SVM: Add support for CR8 write traps for an SEV-ES guest KVM: SVM: Add support for CR4 write traps for an SEV-ES guest KVM: SVM: Add support for CR0 write traps for an SEV-ES guest KVM: SVM: Add support for EFER write traps for an SEV-ES guest KVM: SVM: Support string IO operations for an SEV-ES guest KVM: SVM: Support MMIO for an SEV-ES guest KVM: SVM: Create trace events for VMGEXIT MSR protocol processing KVM: SVM: Create trace events for VMGEXIT processing ...
2020-12-20Merge tag 'rtc-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - Remove nvram ABI. There was no complaints about the deprecation for the last 3 years. - Improve RTC device allocation and registration - Now available for ARCH=um Drivers: - at91rm9200: correction and sam9x60 support - ds1307: improve ACPI support - mxc: now DT only - pcf2127: watchdog support now needs the reset-source property - pcf8523: set range - rx6110: i2c support" * tag 'rtc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (43 commits) rtc: pcf2127: only use watchdog when explicitly available dt-bindings: rtc: add reset-source property rtc: fix RTC removal rtc: s3c: Remove dead code related to periodic tick handling rtc: s3c: Disable all enable (RTC, tick) bits in the probe rtc: ep93xx: Fix NULL pointer dereference in ep93xx_rtc_read_time rtc: test: remove debug message rtc: mxc{,_v2}: enable COMPILE_TEST rtc: enable RTC framework on ARCH=um rtc: pcf8523: use BIT rtc: pcf8523: set range rtc: pcf8523: switch to devm_rtc_allocate_device rtc: destroy mutex when releasing the device rtc: shrink devm_rtc_allocate_device() rtc: rework rtc_register_device() resource management rtc: nvmem: emit an error message when nvmem registration fails rtc: add devm_ prefix to rtc_nvmem_register() rtc: nvmem: remove nvram ABI Documentation: list RTC devres helpers in devres.rst rtc: omap: use devm_pinctrl_register() ...
2020-12-19clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts"Geert Uytterhoeven
Commit 45c940184b501fc6 ("dt-bindings: clk: versaclock5: convert to yaml") accidentally changed "idt,voltage-microvolts" to "idt,voltage-microvolt" in the DT bindings, while the driver still used the former. Update the driver to match the bindings, as Documentation/devicetree/bindings/property-units.txt actually recommends using "microvolt". Fixes: 260249f929e81d3d ("clk: vc5: Enable addition output configurations of the Versaclock") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201218125253.3815567-1-geert+renesas@glider.be Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: ingenic: Fix divider calculation with div tablesPaul Cercueil
The previous code assumed that a higher hardware value always resulted in a bigger divider, which is correct for the regular clocks, but is an invalid assumption when a divider table is provided for the clock. Perfect example of this is the PLL0_HALF clock, which applies a /2 divider with the hardware value 0, and a /1 divider otherwise. Fixes: a9fa2893fcc6 ("clk: ingenic: Add support for divider tables") Cc: <stable@vger.kernel.org> # 5.2 Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20201212135733.38050-1-paul@crapouillou.net Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: sunxi-ng: Make sure divider tables have sentinelJernej Skrabec
Two clock divider tables are missing sentinel at the end. Effect of that is that clock framework reads past the last entry. Fix that with adding sentinel at the end. Issue was discovered with KASan. Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks") Fixes: c6a0637460c2 ("clk: sunxi-ng: Add A64 clocks") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://lore.kernel.org/r/20201202203817.438713-1-jernej.skrabec@siol.net Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: s2mps11: Fix a resource leak in error handling paths in the probe functionChristophe JAILLET
Some resource should be released in the error handling path of the probe function, as already done in the remove function. The remove function was fixed in commit bf416bd45738 ("clk: s2mps11: Add missing of_node_put and of_clk_del_provider") Fixes: 7cc560dea415 ("clk: s2mps11: Add support for s2mps11") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201212122818.86195-1-christophe.jaillet@wanadoo.fr Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9Terry Zhou
There is an error in the current code that the XTAL MODE pin was set to NB MPP1_31 which should be NB MPP1_9. The latch register of NB MPP1_9 has different offset of 0x8. Signed-off-by: Terry Zhou <bjzhou@marvell.com> [pali: Fix pin name in commit message] Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: 7ea8250406a6 ("clk: mvebu: Add the xtal clock for Armada 3700 SoC") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201106100039.11385-1-pali@kernel.org Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: si5351: Wait for bit clear after PLL resetSascha Hauer
Documentation states that SI5351_PLL_RESET_B and SI5351_PLL_RESET_A bits are self clearing bits, so wait until they are cleared before continuing. This fixes a case when the clock doesn't come up properly after a PLL reset. It worked properly when the frequency was below 900MHz, but with 900MHz it only works when we are waiting for the bit to clear. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20201130091033.1687-1-s.hauer@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sam9x60: remove atmel,osc-bypass supportAlexandre Belloni
The sam9x60 doesn't have the MOSCXTBY bit to enable the crystal oscillator bypass. Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver") Reported-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201202125816.168618-1-alexandre.belloni@bootlin.com Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19Merge tag 'for-linus-5.11-rc1b-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: "Some minor cleanup patches and a small series disentangling some Xen related Kconfig options" * tag 'for-linus-5.11-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Kconfig: remove X86_64 depends from XEN_512GB xen/manage: Fix fall-through warnings for Clang xen-blkfront: Fix fall-through warnings for Clang xen: remove trailing semicolon in macro definition xen: Kconfig: nest Xen guest options xen: Remove Xen PVH/PVHVM dependency on PCI x86/xen: Convert to DEFINE_SHOW_ATTRIBUTE
2020-12-19Merge branch 'pcmcia-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux Pull pcmcia updates from Dominik Brodowski: "Besides a few PCMCIA odd fixes, the NEC VRC4173 CARDU driver is removed, as it has not compiled in ages" * 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux: pcmcia: omap: Fix error return code in omap_cf_probe() pcmcia: Remove NEC VRC4173 CARDU pcmcia: db1xxx_ss: remove unneeded semicolon pcmcia/electra_cf: Fix some return values in 'electra_cf_probe()' in case of error
2020-12-19Merge tag 'i3c/for-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3c updates from Boris Brezillon: - Add the HCI driver - Add a missing destroy_workqueue() in an error path - Flag Alexandre Belloni as the new maintainer * tag 'i3c/for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c/master/mipi-i3c-hci: quiet maybe-unused variable warning i3c: Resign from my maintainer role i3c/master: Fix uninitialized variable next_addr i3c/master: introduce the mipi-i3c-hci driver dt-bindings: i3c: MIPI I3C Host Controller Interface i3c master: fix missing destroy_workqueue() on error in i3c_master_register
2020-12-19Merge tag 'for-v5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Battery/charger driver changes: - collie_battery, generic-adc-battery, s3c-adc-battery: convert to GPIO descriptors (incl ARM board files) - misc cleanup and fixes Reset drivers: - new poweroff driver for force disabling a regulator - use printk format symbol resolver - ocelot: add support for Luton and Jaguar2" * tag 'for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (31 commits) power: supply: Fix a typo in warning message Documentation: DT: binding documentation for regulator-poweroff power: reset: new driver regulator-poweroff power: supply: ab8500: Use dev_err_probe() for IIO channels power: supply: ab8500_fg: Request all IRQs as threaded power: supply: ab8500_charger: Oneshot threaded IRQs power: supply: ab8500: Convert to dev_pm_ops power: supply: ab8500: Use local helper power: supply: wm831x_power: remove unneeded break power: supply: bq24735: Drop unused include power: supply: bq24190_charger: Drop unused include power: supply: generic-adc-battery: Use GPIO descriptors power: supply: collie_battery: Convert to GPIO descriptors power: supply: bq24190_charger: fix reference leak power: supply: s3c-adc-battery: Convert to GPIO descriptors power: reset: Use printk format symbol resolver power: supply: axp20x_usb_power: Use power efficient workqueue for debounce power: supply: axp20x_usb_power: fix typo power: supply: max8997-charger: Improve getting charger status power: supply: max8997-charger: Fix platform data retrieval ...
2020-12-19Merge tag 'hsi-for-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi Pull HSI updates from Sebastian Reichel: "Misc cleanups" * tag 'hsi-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: core: fix a kernel-doc markup HSI: omap_ssi: Don't jump to free ID in ssi_add_controller()
2020-12-19Merge tag 'pwm/for-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This is a fairly big release cycle from the PWM framework's point of view. There's a large patcheset here which converts drivers to use the new devm_platform_ioremap_resource() helper and a bunch of minor fixes to existing drivers. Some of the existing drivers also add support for more hardware, such as Atmel SAMA 5D2 and Mediatek MT8183. Finally there's a couple of new drivers for Intel Keem Bay and LGM SoCs as well as the DesignWare PWM controller" * tag 'pwm/for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (66 commits) pwm: sun4i: Remove erroneous else branch pwm: sl28cpld: Set driver data before registering the PWM chip pwm: Remove unused function pwmchip_add_inversed() pwm: imx27: Fix overflow for bigger periods pwm: bcm2835: Support apply function for atomic configuration pwm: keembay: Fix build failure with -Os pwm: core: Use octal permission pwm: lpss: Make compilable with COMPILE_TEST pwm: Fix dependencies on HAS_IOMEM pwm: Use -EINVAL for unsupported polarity pwm: sti: Remove unnecessary blank line pwm: sti: Avoid conditional gotos pwm: Add PWM fan controller driver for LGM SoC Add DT bindings YAML schema for PWM fan controller of LGM SoC pwm: Add DesignWare PWM Controller Driver dt-bindings: pwm: mtk-disp: add MT8167 SoC binding pwm: mediatek: Add MT8183 SoC support pwm: mediatek: Always use bus clock dt-bindings: pwm: pwm-mediatek: Add documentation for MT8183 SoC pwm: Add PWM driver for Intel Keem Bay ...
2020-12-19clk: at91: sama7g5: register cpu clockClaudiu Beznea
Register CPU clock as being the master clock prescaler. This would be used by DVFS. The block schema of SAMA7G5's PMC contains also a divider between master clock prescaler and CPU (PMC_CPU_RATIO.RATIO) but the frequencies supported by SAMA7G5 could be directly received from CPUPLL + master clock prescaler and the extra divider would do no work in case it would be enabled. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-12-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: clk-master: re-factor master clockClaudiu Beznea
Re-factor master clock driver by splitting it into 2 clocks: prescaller and divider clocks. Based on registered clock flags the prescaler's rate could be changed at runtime. This is necessary for platforms supporting DVFS (e.g. SAMA7G5) where master clock could be changed at run-time. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-11-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHzClaudiu Beznea
Since CPU PLL feeds both CPU clock and MCK0, MCK0 cannot go higher than 200MHz and MCK0 maximum prescaller is 5 limit the CPU PLL at 1GHz to avoid MCK0 overclocking while CPU PLL is changed by DVFS. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-10-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: decrease lower limit for MCK0 rateClaudiu Beznea
On SAMA7G5 CPU clock is changed at run-time by DVFS. Since MCK0 and CPU clock shares the same parent clock (CPUPLL clock) the MCK0 is also changed by DVFS to avoid over/under clocking of MCK0 consumers. The lower limit is changed to be able to set MCK0 accordingly by DVFS. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-9-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: remove mck0 from parent list of other clocksClaudiu Beznea
MCK0 is changed at runtime by DVFS. Due to this, since not all IPs are glitch free aware at MCK0 changes, remove MCK0 from parent list of other clocks (e.g. generic clock, programmable/system clock, MCKX). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-8-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: clk-sam9x60-pll: allow runtime changes for pllClaudiu Beznea
Allow runtime frequency changes for PLLs registered with proper flags. This is necessary for CPU PLL on SAMA7G5 which is used by DVFS. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-7-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristicsEugen Hristev
This SoC has the 5th divisor for the mck0 master clock. Adapt the characteristics accordingly. Reported-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-6-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: clk-master: add 5th divisor for mck masterEugen Hristev
clk-master can have 5 divisors with a field width of 3 bits on some products. Change the mask and number of divisors accordingly. Reported-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-5-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DTEugen Hristev
Allow SYSPLL and CPUPLL to be referenced as a PMC_TYPE_CORE clock from phandle in DT. Suggested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> [claudiu.beznea@microchip.com: adapt commit message, add CPU PLL] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-4-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19dt-bindings: clock: at91: add sama7g5 pll definesEugen Hristev
Add SAMA7G5 specific PLL defines to be referenced in a phandle as a PMC_TYPE_CORE clock. Suggested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> [claudiu.beznea@microchip.com: adapt comit message, adapt sama7g5.c] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-3-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: fix compilation errorClaudiu Beznea
pmc_data_allocate() has been changed. pmc_data_free() was removed. Adapt the code taking this into consideration. With this the programmable clocks were also saved in sama7g5_pmc so that they could be later referenced. Fixes: cb783bbbcf54 ("clk: at91: sama7g5: add clock support for sama7g5") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-2-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: bcm: dvp: Add MODULE_DEVICE_TABLE()Nicolas Saenz Julienne
Add MODULE_DEVICE_TABLE() so as to be able to use the driver as a module. More precisely, for the driver to be loaded automatically at boot. Fixes: 1bc95972715a ("clk: bcm: Add BCM2711 DVP driver") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20201202103518.21889-1-nsaenzjulienne@suse.de Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: bcm: dvp: drop a variable that is assigned to onlyUwe Kleine-König
The third parameter to devm_platform_get_and_ioremap_resource() is used only to provide the used resource. As this variable isn't used afterwards, switch to the function devm_platform_ioremap_resource() which doesn't provide this output parameter. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20201120132121.2678997-1-u.kleine-koenig@pengutronix.de Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19rtc: pcf2127: only use watchdog when explicitly availableUwe Kleine-König
Most boards using the pcf2127 chip (in my bubble) don't make use of the watchdog functionality and the respective output is not connected. The effect on such a board is that there is a watchdog device provided that doesn't work. So only register the watchdog if the device tree has a "reset-source" property. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [RV: s/has-watchdog/reset-source/] Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201218101054.25416-3-rasmus.villemoes@prevas.dk
2020-12-18Merge tag 'drm-next-2020-12-18' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull more drm updates from Daniel Vetter: "UAPI Changes: - Only enable char/agp uapi when CONFIG_DRM_LEGACY is set Cross-subsystem Changes: - vma_set_file helper to make vma->vm_file changing less brittle, acked by Andrew Core Changes: - dma-buf heaps improvements - pass full atomic modeset state to driver callbacks - shmem helpers: cached bo by default - cleanups for fbdev, fb-helpers - better docs for drm modes and SCALING_FITLER uapi - ttm: fix dma32 page pool regression Driver Changes: - multi-hop regression fixes for amdgpu, radeon, nouveau - lots of small amdgpu hw enabling fixes (display, pm, ...) - fixes for imx, mcde, meson, some panels, virtio, qxl, i915, all fairly minor - some cleanups for legacy drm/fbdev drivers" * tag 'drm-next-2020-12-18' of git://anongit.freedesktop.org/drm/drm: (117 commits) drm/qxl: don't allocate a dma_address array drm/nouveau: fix multihop when move doesn't work. drm/i915/tgl: Fix REVID macros for TGL to fetch correct stepping drm/i915: Fix mismatch between misplaced vma check and vma insert drm/i915/perf: also include Gen11 in OATAILPTR workaround Revert "drm/i915: re-order if/else ladder for hpd_irq_setup" drm/amdgpu/disply: fix documentation warnings in display manager drm/amdgpu: print mmhub client name for dimgrey_cavefish drm/amdgpu: set mode1 reset as default for dimgrey_cavefish drm/amd/display: Add get_dig_frontend implementation for DCEx drm/radeon: remove h from printk format specifier drm/amdgpu: remove h from printk format specifier drm/amdgpu: Fix spelling mistake "Heterogenous" -> "Heterogeneous" drm/amdgpu: fix regression in vbios reservation handling on headless drm/amdgpu/SRIOV: Extend VF reset request wait period drm/amdkfd: correct amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu log. drm/amd/display: Adding prototype for dccg21_update_dpp_dto() drm/amdgpu: print what method we are using for runtime pm drm/amdgpu: simplify logic in atpx resume handling drm/amdgpu: no need to call pci_ignore_hotplug for _PR3 ...
2020-12-18Merge tag 'thermal-v5.11-2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal fixlet from Daniel Lezcano: "A trivial change which fell through the cracks: Add Alder Lake support ACPI ids (Srinivas Pandruvada)" * tag 'thermal-v5.11-2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal: int340x: Support Alder Lake
2020-12-18Merge tag 's390-5.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Heiko Carstens: "This is mainly to decouple udelay() and arch_cpu_idle() and simplify both of them. Summary: - Always initialize kernel stack backchain when entering the kernel, so that unwinding works properly. - Fix stack unwinder test case to avoid rare interrupt stack corruption. - Simplify udelay() and just let it busy loop instead of implementing a complex logic. - arch_cpu_idle() cleanup. - Some other minor improvements" * tag 's390-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: convert comma to semicolon s390/idle: allow arch_cpu_idle() to be kprobed s390/idle: remove raw_local_irq_save()/restore() from arch_cpu_idle() s390/idle: merge enabled_wait() and arch_cpu_idle() s390/delay: remove udelay_simple() s390/irq: select HAVE_IRQ_EXIT_ON_IRQ_STACK s390/delay: simplify udelay s390/test_unwind: use timer instead of udelay s390/test_unwind: fix CALL_ON_STACK tests s390: make calls to TRACE_IRQS_OFF/TRACE_IRQS_ON balanced s390: always clear kernel stack backchain before calling functions
2020-12-18Merge tag 'drm-intel-next-fixes-2020-12-18' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 fixes for the merge window Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87zh2bp34m.fsf@intel.com
2020-12-18drm/qxl: don't allocate a dma_address arrayChristian König
That seems to be unused. Daniel: Mike reported a warning when booting with qxl, which this patch fixes: [ 1.815561] WARNING: CPU: 7 PID: 355 at drivers/gpu/drm/ttm/ttm_pool.c:365 ttm_pool_alloc+0x41b/0x540 [ttm] Signed-off-by: Christian König <christian.koenig@amd.com> Reported-by: Mike Galbraith <efault@gmx.de> Tested-by: Mike Galbraith <efault@gmx.de> References: https://lore.kernel.org/lkml/7cb43d5b-4e6a-defc-1ab6-5f713ad5a963@amd.com/ Reviewed-by: David Airlie <airlied@redhat.com> [davnet: bring commit message up to par.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201218134243.110884-1-christian.koenig@amd.com
2020-12-18drm/nouveau: fix multihop when move doesn't work.Dave Airlie
As per the radeon/amdgpu fix don't use multihop if hw moves aren't enabled. Reported-by: Mike Galbraith <efault@gmx.de> Tested-by: Mike Galbraith <efault@gmx.de> Fixes: 0c8c0659d747 ("drm/nouveau/ttm: use multihop") Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201217200943.30511-1-airlied@gmail.com
2020-12-18drm/i915/tgl: Fix REVID macros for TGL to fetch correct steppingAditya Swarup
Fix TGL REVID macros to fetch correct display/gt stepping based on SOC rev id from INTEL_REVID() macro. Previously, we were just returning the first element of the revid array instead of using the correct index based on SOC rev id. Fixes: c33298cb34f5 ("drm/i915/tgl: Fix stepping WA matching") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Aditya Swarup <aditya.swarup@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201203072359.156682-1-aditya.swarup@intel.com (cherry picked from commit 83dbd74f8243f020d1ad8a3a3b3cd0795067920e) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-12-18drm/i915: Fix mismatch between misplaced vma check and vma insertChris Wilson
When inserting a VMA, we restrict the placement to the low 4G unless the caller opts into using the full range. This was done to allow usersapce the opportunity to transition slowly from a 32b address space, and to avoid breaking inherent 32b assumptions of some commands. However, for insert we limited ourselves to 4G-4K, but on verification we allowed the full 4G. This causes some attempts to bind a new buffer to sporadically fail with -ENOSPC, but at other times be bound successfully. commit 48ea1e32c39d ("drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page") suggests that there is a genuine problem with stateless addressing that cannot utilize the last page in 4G and so we purposefully excluded it. This means that the quick pin pass may cause us to utilize a buggy placement. Reported-by: CQ Tang <cq.tang@intel.com> Testcase: igt/gem_exec_params/larger-than-life-batch Fixes: 48ea1e32c39d ("drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: CQ Tang <cq.tang@intel.com> Reviewed-by: CQ Tang <cq.tang@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Cc: <stable@vger.kernel.org> # v4.5+ Link: https://patchwork.freedesktop.org/patch/msgid/20201216092951.7124-1-chris@chris-wilson.co.uk (cherry picked from commit 5f22cc0b134ab702d7f64b714e26018f7288ffee) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-12-18drm/i915/perf: also include Gen11 in OATAILPTR workaroundLionel Landwerlin
CI shows this workaround is also needed on Gen11. Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: 059a0beb486344 ("drm/i915/perf: workaround register corruption in OATAILPTR") Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201126105155.540350-1-lionel.g.landwerlin@intel.com (cherry picked from commit fa5d598b8cbab0af92bac48fd60e74a893550923) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-12-18Revert "drm/i915: re-order if/else ladder for hpd_irq_setup"Chris Wilson
We now use ilk_hpd_irq_setup for all GMCH platforms that do not have hotplug. These are early gen3 and gen2 devices that now explode on boot as they try to access non-existent registers. Fixes: 794d61a19090 ("drm/i915: re-order if/else ladder for hpd_irq_setup") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201127145748.29491-1-chris@chris-wilson.co.uk (cherry picked from commit e5346a1ff38a405c14ce8e595269e9b7dcfbb2e9) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-12-17Merge tag 'gpio-v5.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of the GPIO changes for the v5.11 kernel cycle: Core changes: - Retired the old set-up function for GPIO IRQ chips. All chips now use the template struct gpio_irq_chip and pass that to the core to be set up alongside the gpio_chip. We can finally get rid of the old cruft. - Some refactoring and clean up of the core code. - Support edge event timestamps to be stamped using REALTIME (wall clock) timestamps. We have found solid use cases for this, so we support it. New drivers: - MStar MSC313 GPIO driver. - HiSilicon GPIO driver. Driver improvements: - The PCA953x driver now also supports the NXP PCAL9554B/C chips. - The mockup driver can now be probed from the device tree which is pretty useful for virtual prototyping of devices. - The Rcar driver now supports .get_multiple() - The MXC driver dropped some legacy and became a pure device tree client. - The Exar driver was moved over to the IDA interface for enumerating, and also switched over to using regmap for register access" * tag 'gpio-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits) MAINTAINERS: Remove reference to non-existing file gpio: hisi: Do not require ACPI for COMPILE_TEST MAINTAINERS: Add maintainer for HiSilicon GPIO driver gpio: gpio-hisi: Add HiSilicon GPIO support gpio: cs5535: Simplify the return expression of cs5535_gpio_probe() gpiolib: irq hooks: fix recursion in gpiochip_irq_unmask dt-bindings: mt7621-gpio: convert bindings to YAML format gpiolib: cdev: Flag invalid GPIOs as used gpio: put virtual gpio device into their own submenu drivers: gpio: amd8111: use SPDX-License-Identifier drivers: gpio: amd8111: prefer dev_err()/dev_info() over raw printk drivers: gpio: bt8xx: prefer dev_err()/dev_warn() over of raw printk gpio: Add TODO item for debugfs interface gpio: just plain warning when nonexisting gpio requested tools: gpio: add option to report wall-clock time to gpio-event-mon tools: gpio: add support for reporting realtime event clock to lsgpio gpiolib: cdev: allow edge event timestamps to be configured as REALTIME gpio: msc313: MStar MSC313 GPIO driver dt-bindings: gpio: Binding for MStar MSC313 GPIO controller dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver ...
2020-12-17Merge tag 'for-linus-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: - IRQ handling cleanups - Support for suspend - Various fixes for UML specific drivers: ubd, vector, xterm * tag 'for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: (32 commits) um: Fix build w/o CONFIG_PM_SLEEP um: time-travel: Correct time event IRQ delivery um: irq/sigio: Support suspend/resume handling of workaround IRQs um: time-travel: Actually apply "free-until" optimisation um: chan_xterm: Fix fd leak um: tty: Fix handling of close in tty lines um: Monitor error events in IRQ controller um: allocate a guard page to helper threads um: support some of ARCH_HAS_SET_MEMORY um: time-travel: avoid multiple identical propagations um: Fetch registers only for signals which need them um: Support suspend to RAM um: Allow PM with suspend-to-idle um: time: Fix read_persistent_clock64() in time-travel um: Simplify os_idle_sleep() and sleep longer um: Simplify IRQ handling code um: Remove IRQ_NONE type um: irq: Reduce irq_reg allocation um: irq: Clean up and rename struct irq_fd um: Clean up alarm IRQ chip name ...
2020-12-17Merge tag 'for-linus-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull jffs2, ubi and ubifs updates from Richard Weinberger: "JFFS2: - Fix for a remount regression - Fix for an abnormal GC exit - Fix for a possible NULL pointer issue while mounting UBI: - Add support ECC-ed NOR flash - Removal of dead code UBIFS: - Make node dumping debug code more reliable - Various cleanups: less ifdefs, less typos - Fix for an info leak" * tag 'for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubifs: ubifs_dump_node: Dump all branches of the index node ubifs: ubifs_dump_sleb: Remove unused function ubifs: Pass node length in all node dumping callers Revert "ubifs: Fix out-of-bounds memory access caused by abnormal value of node_len" ubifs: Limit dumping length by size of memory which is allocated for the node ubifs: Remove the redundant return in dbg_check_nondata_nodes_order jffs2: Fix NULL pointer dereference in rp_size fs option parsing ubifs: Fixed print foramt mismatch in ubifs ubi: Do not zero out EC and VID on ECC-ed NOR flashes jffs2: remove trailing semicolon in macro definition ubifs: Fix error return code in ubifs_init_authentication() ubifs: wbuf: Don't leak kernel memory to flash ubi: Remove useless code in bytes_str_to_int ubifs: Fix the printing type of c->big_lpt jffs2: Allow setting rp_size to zero during remounting jffs2: Fix ignoring mounting options problem during remounting jffs2: Fix GC exit abnormally ubifs: Code cleanup by removing ifdef macro surrounding jffs2: Fix if/else empty body warnings ubifs: Delete duplicated words + other fixes
2020-12-17Merge tag 'net-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Current release - always broken: - net/smc: fix access to parent of an ib device - devlink: use _BITUL() macro instead of BIT() in the UAPI header - handful of mptcp fixes Previous release - regressions: - intel: AF_XDP: clear the status bits for the next_to_use descriptor - dpaa2-eth: fix the size of the mapped SGT buffer Previous release - always broken: - mptcp: fix security context on server socket - ethtool: fix string set id check - ethtool: fix error paths in ethnl_set_channels() - lan743x: fix rx_napi_poll/interrupt ping-pong - qca: ar9331: fix sleeping function called from invalid context bug" * tag 'net-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (32 commits) net/sched: sch_taprio: reset child qdiscs before freeing them nfp: move indirect block cleanup to flower app stop callback octeontx2-af: Fix undetected unmap PF error check net: nixge: fix spelling mistake in Kconfig: "Instuments" -> "Instruments" qlcnic: Fix error code in probe mptcp: fix pending data accounting mptcp: push pending frames when subflow has free space mptcp: properly annotate nested lock mptcp: fix security context on server socket net/mlx5: Fix compilation warning for 32-bit platform mptcp: clear use_ack and use_map when dropping other suboptions devlink: use _BITUL() macro instead of BIT() in the UAPI header net: korina: fix return value net/smc: fix access to parent of an ib device ethtool: fix error paths in ethnl_set_channels() nfc: s3fwrn5: Remove unused NCI prop commands nfc: s3fwrn5: Remove the delay for NFC sleep phy: fix kdoc warning tipc: do sanity check payload of a netlink message use __netdev_notify_peers in hyperv ...
2020-12-17Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds
Pull OpenRISC updates from Stafford Horne: - New drivers and OpenRISC support for the LiteX platform - A bug fix to support userspace gdb debugging - Fixes one compile issue with blk-iocost * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: add local64.h to fix blk-iocost build openrisc: fix trap for debugger breakpoint signalling openrisc: add support for LiteX drivers/tty/serial: add LiteUART driver dt-bindings: serial: document LiteUART bindings drivers/soc/litex: add LiteX SoC Controller driver dt-bindings: soc: document LiteX SoC Controller bindings dt-bindings: vendor: add vendor prefix for LiteX
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 09:41:12 +0000