summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-01-08drm/amd/powerplay: update OD support flag for SKU with no OD capabilitiesEvan Quan
For those ASICs with no overdrive capabilities, the OD support flag will be reset. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-03drm/amdgpu: make gfx9 enter into rlc safe mode when set MGCGLikun Gao
MGCG should RLC enter into safe mode first. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-03drm/amdgpu: Cleanup 2 compiler warningsKent Russell
These 2 variables are unused now, so remove their references. Fixes: e4ae0fc drm/amdgpu: implement gfx8 post_soft_reset Fixes: 5e01c09 drm/amdgpu/gfx_v8_0: Reorder the gfx, kiq and kcq rings test sequence Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-02drm/amdgpu/gfx_v8_0: Reorder the gfx, kiq and kcq rings test sequenceTiecheng Zhou
The kiq ring and the very first compute ring may fail occasionally if they are tested directly following kiq_kcq_enable. Insert the gfx ring test before kiq ring test to delay the kiq and kcq ring tests will fix the issue. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-02drm/amdgpu/sriov:Correct pfvf exchange logicEmily Deng
The pfvf exchange need be in exclusive mode. And add pfvf exchange in gpu reset. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-By: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-02drm/amd/powerplay: support BOOTUP_DEFAULT power profile modeEvan Quan
This can avoid unexpected profile mode change after running compute workload. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-02drm/amdgpu/virtual_dce: No need to pin the cursor boEmily Deng
For virtual display feature, no need to pin cursor bo. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-02drm/amdgpu/virtual_dce: No need to pin the fb's boEmily Deng
For virtual display, no need to pin the fb's bo. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-31Merge branch 'drm-next-4.21' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next Fixes for 4.21. A bit more than usual due to the holidays. Highlights: - add new vegaM pci id - sr-iov fixes - DC fix for fast cursor updates - DC freesync fix - DC display clock fix for polaris - DC fixes for dongles - DC fix for some eDP panels - misc vega20 fixes - kfd return code fix for dma_buf support - VCN fixes for PCO - nbio hw bug workaround Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181229183307.3330-1-alexander.deucher@amd.com
2018-12-28Merge tag 'drm-intel-next-fixes-2018-12-27' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next GVT fixes for v4.21-rc1 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87imzfwh73.fsf@intel.com
2018-12-21drm/amdgpu: Add new VegaM pci idAlex Deucher
Add a new pci id. Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-12-21drm/ttm: Use drm_debug_printer for all ttm_bo_mem_space_debug outputMichel Dänzer
No need for pr_err here, the pr_err message in ttm_bo_evict is enough to draw attention to something not going as planned. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-21drm/amdgpu: add Vega20 PSP ASD firmware loadingEvan Quan
Add PSP ASD firmware loading on Vega20. Not sure why this was missing before. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-12-20drm/amd/display: Fix MST dp_blank REG_WAIT timeoutJerry (Fangzhi) Zuo
Need to blank stream before deallocate MST payload. [drm:generic_reg_wait [amdgpu]] *ERROR* REG_WAIT timeout 10us * 3000 tries - dce110_stream_encoder_dp_blank line:944 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2201 at /var/lib/dkms/amdgpu/18.50-690240/build/amd/amdgpu/../display/dc/dc_helper.c:249 generic_reg_wait+0xe7/0x160 [amdgpu] Call Trace: dce110_stream_encoder_dp_blank+0x11c/0x180 [amdgpu] core_link_disable_stream+0x40/0x230 [amdgpu] ? generic_reg_update_ex+0xdb/0x130 [amdgpu] dce110_reset_hw_ctx_wrap+0xb7/0x1f0 [amdgpu] dce110_apply_ctx_to_hw+0x30/0x430 [amdgpu] ? dce110_apply_ctx_for_surface+0x206/0x260 [amdgpu] dc_commit_state+0x2ba/0x4d0 [amdgpu] amdgpu_dm_atomic_commit_tail+0x297/0xd70 [amdgpu] ? amdgpu_bo_pin_restricted+0x58/0x260 [amdgpu] ? wait_for_completion_timeout+0x1f/0x120 ? wait_for_completion_interruptible+0x1c/0x160 commit_tail+0x3d/0x60 [drm_kms_helper] drm_atomic_helper_commit+0xf6/0x100 [drm_kms_helper] drm_atomic_connector_commit_dpms+0xe5/0xf0 [drm] drm_mode_obj_set_property_ioctl+0x14f/0x250 [drm] drm_mode_connector_property_set_ioctl+0x2e/0x40 [drm] drm_ioctl+0x1e0/0x430 [drm] ? drm_mode_connector_set_obj_prop+0x70/0x70 [drm] ? ep_read_events_proc+0xb0/0xb0 ? ep_scan_ready_list.constprop.18+0x1e6/0x1f0 ? timerqueue_add+0x52/0x80 amdgpu_drm_ioctl+0x49/0x80 [amdgpu] do_vfs_ioctl+0x90/0x5f0 SyS_ioctl+0x74/0x80 do_syscall_64+0x74/0x140 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 ---[ end trace 3ed7b77a97d60f72 ]--- Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-12-20drm/amd/display: validate extended dongle capsWenjing Liu
[why] Some dongle doesn't have a valid extended dongle caps, but we still set the extended dongle caps to be valid. This causes validation fails for all timing. [how] If no dp_hdmi_max_pixel_clk is provided, don't use extended dongle caps. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-20drm/amd/display: Use div_u64 for flip timestamp ns to msNicholas Kazlauskas
Resolves __udivdi3 missing errors when building for i386. Fixes: 6378ef012ddc ("drm/amd/display: Add below the range support for FreeSync") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-20drm/amdgpu/uvd:Change uvd ring name conventionJames Zhu
Since umr tool can't handle bracket, change uvd ring name convention. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-20drm/amd/powerplay: add Vega20 LCLK DPM level setting supportEvan Quan
Support manual LCLK DPM level switch on Vega20. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-20drm/amdgpu: print process info when job timeoutTrigger Huang
When a job is timeout, try to print the related process information for debugging Signed-off-by: Trigger Huang <Trigger.Huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-20drm/amdgpu/nbio7.4: add hw bug workaround for vega20Alex Deucher
Configure PCIE_CI_CNTL to work around a hw bug that affects some multi-GPU compute workloads. Acked-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-20drm/amdgpu/nbio6.1: add hw bug workaround for vega10/12Alex Deucher
Configure PCIE_CI_CNTL to work around a hw bug that affects some multi-GPU compute workloads. Acked-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amd/display: Optimize passive update planes.Yongqiang Sun
[Why] passive update planes still spends a litte more time on some cases. [How] Remove unnecessary trace which involving in some register read. Disable debug output for release build. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amd/display: verify lane status before exiting verify link capWenjing Liu
[why] DP LL CTS1.4 4.3.2.1 test failure. [how] The failure is caused by not handling DP link loss hpd short pusle during set mode. The change is to read link status before set mode link training. If link is lost, re-verify link caps. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amd/display: Fix bug with not updating VSP infoframeSivapiriyanKumarasamy
[WHY] Currently, when the VSP infopacket is rebuilt in DM, it is not updated when being programmed in encoder. [HOW] Add new VSP case for update_info_frame Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amd/display: Add retry to read ddc_clock pinPaul Hsieh
[WHY] On customer board, there is one pluse (1v , < 1ms) on DDC_CLK pin when plug / unplug DP cable. Driver will read it and config DP to HDMI/DVI dongle. [HOW] If there is a real dongle, DDC_CLK should be always pull high. Try to read again to recovery this special case. Retry times = 3. Need additional 3ms to detect DP passive dongle(3 failures) Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amd/display: Don't skip link training for empty dongleEric Yang
[Why] Skipping initial link training will result in no verified link cap for mode enumeration. Some versions of the BIOS seem to have PHY programming sequence issue as well if initial link training is skipped, resulting in a softlock in BIOS command table. [How] Identify the empty dongle hotplug case, and still do initial link training. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amd/display: Wait edp HPD to high in detect_sinkDale Zhao
[Why] In 99% user case, edp will be post by vbios. In 1% / current case: Lenovo don't light up edp panel in vbios post stage, vbios won't be lit up. Thus in dal when we init DCN 10 hw, we power up edp, then we start detect_sink, but internal time is too short, when we detect it, HPD is still low, so we don't detect the edp, and edp shows black. [How] When we init hw, we wait edp HPD to high after power up edp. Signed-off-by: Dale Zhao <dale.zhao@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amd/display: fix surface update sequenceDmytro Laktyushkin
An earlier change added update of interdependent dlg/ttu params for pipes not being updated in the current call. The code fails to check if the other pipes are actually active yet causing an assert. This change adds a check for surface presence on the pipes before updating the interdepenednt params. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amd/display: fix YCbCr420 blank colorEric Yang
[Why] YCbCr420 packing format uses two chanels for luma, and 1 channel for both chroma component. Our previous implementation did not account for this and results in every other pixel having very high luma value, showing greyish color instead of black. YCbCr444 = <Y1, Cb1, Cr1>; <Y2, Cb2, Cr2> ..... YCbCr420 = <Y1, Y2, Cb1>; <Y3, Y4, Cr1> ..... [How] Program the second channel with the black color value for luma as well. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Hugo Hu <Hugo.Hu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amd/display: Warn instead of error on REG_WAIT timeoutDavid Francis
[Why] DC warns when a REG_WAIT takes a while and full-on errors with stack dump on REG_WAIT timeout. Most of the time it isn't a real issue. [How] Make DC cool its jets - taking a while is a debug message (because it is not something that normal users should need to be aware of), and timeouts are warnings (because it technically shouldn't happen, but it's not a big deal if it does) Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amd/display: move AYCrCb8888 format to video sectionDmytro Laktyushkin
This is a dual channel format and should be treated like other video formats Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amd/display: Don't log error if we have no connectorsHarry Wentland
[Why] In certain configurations, such as PX configs or some Vega20 parts DC gets created without connectors. [How] Drop the dm_error print when no connectors. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amd/display: Add functionality to get XGMI SS infoLeo Li
[Why] When XGMI is enabled, the DP reference clock needs to be adjusted according to the XGMI spread spectrum percentage and mode. But first, we need the ability to fetch this info. [How] Within the BIOS parser, Read from vBIOS when XGMI SS info is requested. In addition, diags build uses include_legacy/atomfirmware.h for the smu_info_v3_3 table headers. Update that as well. Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amd/display: Add DCE_VERSION_12_1 enum for Vega 20Leo Li
[Why] We'll need a way to differentiate Vega 20 in DC [How] Add a DCE_VERSION_12_1 enum, which will be returned as the DC version if the ASIC used is a Vega 20. Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: David Francis <David.Francis@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amd/display: Add below the range support for FreeSyncNicholas Kazlauskas
[Why] When the flip-rate is below the minimum supported variable refresh rate range for the monitor the front porch wait will timeout and be frequently misaligned resulting in stuttering and/or flickering. The FreeSync module can still maintain a smooth and flicker free image when the monitor has a refresh rate range such that the maximum refresh > 2 * minimum refresh by utilizing low framerate compensation, "below the range". [How] Hook up the pre-flip and post-flip handlers from the FreeSync module. These adjust the minimum/maximum vrr range to duplicate frames when appropriate by tracking flip timestamps. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amd/display: Raise dispclk value for PolarisRoman Li
[Why] The visual corruption due to low display clock value observed on some systems [How] There was earlier patch for dspclk: 'drm/amd/display: Raise dispclk value for dce_update_clocks' Adding +15% workaround also to to dce112_update_clocks Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Leo Li <Sunpeng.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amd/display: Skip fast cursor updates for fb changesNicholas Kazlauskas
[Why] The behavior of drm_atomic_helper_cleanup_planes differs depending on whether the commit was asynchronous or not. When it's called from amdgpu_dm_atomic_commit_tail during a typical atomic commit the plane state has been swapped so it calls cleanup_fb on the old plane state. However, in the asynchronous commit codepath the call to drm_atomic_helper_commit also calls dm_plane_helper_cleanup_fb after atomic_async_update has been called. Since the plane state is updated in place and has not been swapped the cleanup_fb call affects the new plane state. This results in a use after free for the given sequence: - Fast update, fb1 pin/ref, fb1 unpin/unref - Fast update, fb2 pin/ref, fb2 unpin/unref - Slow update, fb1 pin/ref, fb2 unpin/unref - Fast update, fb2 pin/ref -> use after free. bug [How] Disallow framebuffer changes in the fast path. Since this includes a NULL framebuffer, this means that only framebuffers that have been previously pin+ref at least once will be used, preventing a use after free. This has a significant throughput reduction for cursor updates where the framebuffer changes. For most desktop usage this isn't a problem, but it does introduce performance regressions for two specific IGT tests: - cursor-vs-flip-toggle - cursor-vs-flip-varying-size Fixes: 2cc751931afc ("drm/amd/display: Add fast path for cursor plane updates") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amdgpu: correct the return value for error caseEvan Quan
It should not return 0 for error case as '0' is actually a special value for index. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amdkfd: Fix handling of return code of dma_buf_getFelix Kuehling
On errors, dma_buf_get returns a negative error code, rather than NULL. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amdgpu:Improves robustness of SOC15_WAIT_ON_RREGJames Zhu
If register value is updating, reset timeout counter. It improves robustness of SOC15_WAIT_ON_RREG. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amdgpu/vcn:Remove bit 31 for scratch2 to indicate the WA is activeJames Zhu
Remove bit 31 for scratch2 to indicate the Hardware bug work around is active. Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amdgpu/vcn:Scan enc/jpeg fences to init dpg pause new stateJames Zhu
Scan enc/jpeg fences to init dpg pause new state in begin use. It will help set dpg mode to desire state actively. Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amdgpu/vcn:Always check all vcn ring status during dpg mode stopJames Zhu
Always check all vcn ring status during dpg mode stop, it will help identify which vcn ring may cause the issue. Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amdgpu/vcn:Update ring point to JPEG before init JPEG wptrJames Zhu
It is a bug fix. Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amdgpu/vcn:Always gate vcn block during hw finishingJames Zhu
Under Dynamic Power Gate mode, UVD_STATUS needn't be checked. Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18drm/amdgpu/vcn: Update vcn.cur_state during suspendJames Zhu
Replace vcn_v1_0_stop with vcn_v1_0_set_powergating_state during suspend, to keep adev->vcn.cur_state update. It will fix VCN S3 hung issue. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-18Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into ↵Daniel Vetter
drm-next Lucas writes: "nothing major this time, mostly some cleanups that were found on the way of reworking the code in preparation for new feature additions." Small conflict in drivers/gpu/drm/etnaviv/etnaviv_drv.c because drm-misc-next also has a patch to switch over to _put() functions. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> From: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/1545130845.5874.23.camel@pengutronix.de
2018-12-18drm/etnaviv: remove lastctx member from gpu structLucas Stach
It only written and we don't infer any useful information from it anymore. Remove it. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2018-12-18drm/etnaviv: replace header include with forward declarationLucas Stach
The etnaviv_gpu header only needs to know about the pointer types, so replace by a forward declaration and only include the headers where needed. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2018-12-18drm/etnaviv: remove unnecessary local irq disableLucas Stach
The only event function that is called from IRQ context is event_free, which is already using atomic bitmap operations, so we can avoid taking the event spinlock in this function completely. As other the other functions still using the event spinlock are all called from normal process context, we can avoid disabling IRQs while holding the spinlock. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 20:09:38 +0000