summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2005-06-24[PATCH] DViCO FusionHDTV3 Gold-T documentation fixMichael Krufky
Even though it says DViCO FusionHDTV3 Gold-Q on the box, Gold-T is printed on the card. This fix corrects the error in all places, and corrects the tuner name Thomson DDT 7611 (ATSC/NTSC) in the documentation. This applies against 2.6.12-rc5-mm2 after applying Manueal Capinha's patch "Add support for PixelView Ultra Pro in v4l" (because of the change from card=27 to card=28) Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] v4l: add support for PixelView Ultra ProManuel Capinha
The following patch adds support for the PixelView Ultra Pro video capture card in v4l. - It removes the remote control key definitions from ir-kbd-gpio.c and moves them to ir-common.c so that they can be shared between bt878 and cx88 based cards. - The patch also moves the FUSIONHDTV_3_GOLD_Q card from number 27 to 28 to regain compatibility with the V4L cvs. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] v4l: PAL-M support fix for CX88 chipsetsMauro Carvalho Chehab
This patch fixes PAL-M chroma subcarrier frequency (FSC) to its correct value of 3.5756115 MHz and adjusts horizontal total samples for PAL-M, according with formula Line Draw Time / (4*FSC). Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Cc: <video4linux-list@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] v4l: saa7134 ntsc vbi fixMichael Schimek
This patch fixes NTSC VBI capturing in the saa7134 driver. Signed-off-by: Michael H. Schimek <mschimek@gmx.at> Cc: <video4linux-list@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] BTTV support for Adlink RTV24 capture cardPeter Skipworth
The bttv module currently lacks support for the Adlink RTV24 capture card. The following patch adds support for the Adlink RTV24 video capture card to the bttv module. Cc: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] Fix for cx88-cards.c for DVICO-FusionHDTV 3 GOLD QMichael Krufky
This patch allows full analog functionality for the DViCO FusionHDTV3 Gold-Q, 18ac:d820 which has a Conexant cx23882, Thompson7611, and LG 3202. It does NOT yet support digital decoding or digital audio without the internal analog audio jack connected to the sound board, but it works perfectly in analog mode. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] VIDEO_CX88_DVB must select DVB_CX22702Adrian Bunk
VIDEO_CX88_DVB must select DVB_CX22702 (due to its cx22702_attach usage). This patch fixes kernel Bugzilla #4594 (http://bugzilla.kernel.org/show_bug.cgi?id=4594). Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] saa7134: mark little endian ptrAlexey Dobriyan
> - *ptr = sg_dma_address(list) - list->offset; > + *ptr = cpu_to_le32(sg_dma_address(list) - list->offset); Clearly mark pointers to little-endian things. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] v4l: saa7134 byteorder fixGerd Knorr
Fix byteorder bug in the saa7134 driver. With that ObviouslyCorrect[tm] patch applied the driver reportly works on powerpc. Signed-off-by: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] oprofile: report anonymous region samplesJohn Levon
The below patch passes samples from anonymous regions to userspace instead of just dropping them. This provides the support needed for reporting anonymous-region code samples (today: basic accumulated results; later: Java and other dynamically compiled code). As this changes the format, an upgrade to the just-released 0.9 release of the userspace tools is required. This patch is based upon an earlier one by Will Cohen <wcohen@redhat.com> Signed-off-by: John Levon <levon@movementarian.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] tuner-core.c improvments and Ymec Tvision TVF8533MF supportMauro Carvalho Chehab
tuner-core.c, tuner.h: - tuner-core changed to support multiple I2C devices used on some adapters; - Kconfig now has an option (CONFIG_TUNER_MULTI_I2C) to enable this new behavor; - By default, even enabling CONFIG_TUNER_MULTI_I2C, tuner-core emulates the old behavor, using first I2C device for both FM and TV; - There is a new i2c command (TUNER_SET_ADDR) to allow tuner clients to select I2C address for FM or TV tuner; - Tuner I2C dettach now generates a warning on syslog if failed. tuner-simple.c: - TVision TVF-8531MF and TVF-5533 MF tuner included. It uses, by default, I2C on 0xC2 address for TV and on 0xC0 for Radio. Both TV and FM Radio mode are working. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] dvb: flexcop: add BCM3510 ATSC frontend support for Air2PC cardJohannes Stezenbach
Added support for the Broadcom BCM3510 ATSC (8VSB/16VSB & ITU J83 AnnexB FEC QAM64/256) demodulator used in the first generation of Air2PC ATSC PCI-cards/USB-boxes made by B2C2. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] dvb: dvb_frontend: use time_after()Johannes Stezenbach
Use time_after() macro. Signed-off-by: Marcelo Feitoza Parisi <marcelo@feitoza.com.br> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] dvb-usb: fix init error checkingJohannes Stezenbach
Fix error checking during initialization. Thanks to Gerolf Wendland for discovering. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] dvb: Add generalized dvb-usb driverJohannes Stezenbach
Add generalized dvb-usb driver which supports a wide variety of devices. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] dvb: drop obsolete dibusb driverJohannes Stezenbach
Remove the dibusb driver which has been obsoleted by the generalized dvb-usb driver. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] tpm: device attribute fixesYani Ioannou
This patch updates all the device attribute callbacks that weren't updated with the new parameter, I guess because they weren't in Greg's tree (including drivers/pcmcia/ds.c). Without the patch these callbacks are probably broken (and generate a warning along the lines of "assignment from incompatible pointer type"). Please see http://lkml.org/lkml/2005/5/19/40 for the scripts I used to update the attributes automatically. Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] i2o build fixAndrew Morton
LD .tmp_vmlinux1 drivers/built-in.o: In function `i2o_cfg_parms': config-osm.c:(.text+0x12764a): undefined reference to `i2o_parm_issue' Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] I2O: Limit max sector workaround for Promise controllersMarkus Lidel
Set max sectors to 256 for Promise controllers. Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] I2O: Lindent run and replacement of printk through osm printing ↵Markus Lidel
functions Lindent run and replaced printk() through the corresponding osm_*() function Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] I2O: second code cleanup of sparse warnings and unneeded syncronizationMarkus Lidel
Changes: - Added header "core.h" for i2o_core.ko internal definitions - More sparse fixes - Changed display of TID's in sysfs attributes from XXX to 0xXXX - Use the right functions for accessing I/O and normal memory - Removed error handling of SCSI device errors and let the SCSI layer take care of it - Added new device / removed device handling to SCSI-OSM - Make status access volatile - Cleaned up activation of I2O controller - Removed unnecessary wmb() and rmb() calls - Use own struct i2o_io for I/O memory instead of struct i2o_dma Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] I2O: Adaptec specific SG_IO access, firmware access through sysfs ↵Markus Lidel
and 2400A workaround Changes: - Provide SG_IO access to BLOCK and EXECUTIVE class on Adaptec controllers - Use PRIVATE messages in SCSI-OSM because on some controllers normal SCSI class commands like READ or READ CAPACITY cause errors - Use new DMA and SG list creation function - Added workaround to limit sectors per request for Adaptec 2400A controllers Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] I2O: new sysfs attributes and Adaptec specific block device access ↵Markus Lidel
and 64-bit DMA support Changes: - Added Bus-OSM which could be used by user space programs to reset a channel on the controller - Make ioctl's in Config-OSM obsolete in prefer for sysfs attributes and move those to its own file - Added sysfs attribute for firmware read and write access for I2O controllers - Added special handling of firmware read and write access for Adaptec controllers - Added vendor id and product id as sysfs-attribute to Executive classes - Added automatic notification of LCT change handling to Exec-OSM - Added flushing function to Block-OSM for later barrier implementation - Use PRIVATE messages for Block access on Adaptec controllers, which are faster then BLOCK class access - Cleaned up support for Promise controller - New messages are now detected using the IRQ status register as suggested by the I2O spec - Added i2o_dma_high() and i2o_dma_low() functions - Added facility for SG tablesize calculation when using 32-bit and 64-bit DMA addresses - Added i2o_dma_map_single() and i2o_dma_map_sg() which could build the SG list for 32-bit as well as 64-bit DMA addresses Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] I2O: first code cleanup of spare warnings and unused functionsMarkus Lidel
Changes: - Removed unnecessary checking of NULL before calling kfree() - Make some functions static - Changed pr_debug() into osm_debug() - Use i2o_msg_in_to_virt() for getting a pointer to the message frame - Cleaned up some comments - Changed some le32_to_cpu() into readl() where necessary - Make error messages of OSM's look the same - Cleaned up error handling in i2o_block_end_request() - Removed unused error handling of failed messages in Block-OSM, which are not allowed by the I2O spec - Corrected the blocksize detection in i2o_block - Added hrt and lct sysfs-attribute to controller - Call done() function in SCSI-OSM after freeing DMA buffers - Removed unneeded variable for message size calculation in i2o_scsi_queuecommand() - Make some changes to remove sparse warnings - Reordered some functions - Cleaned up controller initialization - Replaced some magic numbers by defines - Removed unnecessary dma_sync_single_for_cpu() call on coherent DMA - Removed some unused fields in i2o_controller and removed some unused functions Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] I2O: bugfixes and compability enhancementsMarkus Lidel
Changes: - Fixed sysfs bug where user and parent links where added to the I2O device itself - Fixed bug when calculating TID for the event handler and cleaned up the workflow of i2o_driver_dispatch() - Fixed oops when no I2O device could be found for an event delivered to Exec-OSM - Fixed initialization of spinlock in Exec-OSM - Fixed memory leak in i2o_cfg_passthru() and i2o_cfg_passthru() - Removed MTRR support - Added PCI ID of Promise SX6000 with firmware >= 1.20.x.x - Turn of caching for ioremapped memory of in_queue - Added initialization sequence for Promise controllers - Moved definition of u8 / u16 / u32 for raidutils before first use Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] tpm: improve output in sysfs files when the TPM failsKylene Jo Hall
Since after reconsideration this is more debug output than an error (the TPM is operating correctly given the current state) I have changed the statements to dbg rather than err. Also this patch corrects a memory leak if the error path is taken in the tpm_show_pubek function. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] tpm: add debugging outputKylene Hall
Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] tpm: replace odd LPC init functionKylene Hall
Realized the tpm_lpc_init function isn't really necessary. Replaced it with vendor specific logic to find out the address the BIOS mapped the TPM to. This patch removes the tpm_lpc_init function, enums associated with it and calls to it. The patch also implements the replacement functionality. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] tpm: TPMs on additional LPC busKylene Hall
Add support for TPMs on additional LPC buses. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] tpm: locking fixesKylene Hall
Add a missing lock in the register hardware and fix a misplaced lock release release. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] tpm: add cancel functionKylene Hall
This patch provides the logic to check if an operation has been canceled while waiting for the response to arrive. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] tpm: sysfs owernship changesKylene Hall
In the current driver all sysfs files end up owned by the base driver module rather than the module that actually owns the device this is a problem if the module is unloaded and the file is open. This patch fixes all that and lumps the files into an attribute_group. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] tpm: remove unnecessary __forceKylene Hall
Remove the unnecessary use of __force. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] tpm: use to_pci_devKylene Hall
Changes the container_of calls to 'to_pci_dev' as suggested previously. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] tpm: fix timer initializationKylene Hall
Fix the timer to be inited and modified properly. This work depends on the fixing of the msleep stuff which in patch 1 of this set. Signed-of-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] tpm: large stack objectsKylene Hall
Remove some large objects be declared on the the stack. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] tpm: read return code issueKylene Hall
Replace an erroneous return code for the read function when no data is available. Signed-of-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] tpm: remove unnecessary module stuffKylene Hall
Description: Remove unnecessary (empty) module definitions. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] tpm: address missing const defsKylene Hall
Add "const" to several static arrays that were missing it in their definitions. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] tpm: Fix concerns with TPM driver -- use enumsKylene Hall
Convert #defines to named enums where that preference has been indicated by other kernel developers. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] char/tpm: use msleep(), clean-up timers,Nishanth Aravamudan
The TPM driver unnecessarily uses timers when it simply needs to maintain a maximum delay via time_before(). msleep() is used instead of schedule_timeout() to guarantee the task delays as expected. While compile-testing, I found a typo in the driver, using tpm_chp instead of tpm_chip. Remove the now unused timer callback function and change TPM_TIMEOUT's units to milliseconds. Patch is compile-tested. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Acked-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] ipmi: add 32-bit ioctl translations for 64-bit platformsAndrew Morton
) From: Corey Minyard <minyard@acm.org> This contains the patch for supporting 32-bit compatible ioctls on x86_64 systems. The current x86_64 driver will not work with 32-bit applications. Signed-off-by: Jordan Hargave <jordan_hargrave@dell.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] ipmi: use completions, not semaphores, in powerdown codeCorey Minyard
Don't use semaphores for IPC in the poweroff code, use completions instead. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] ipmi: add power cycle capabilityCorey Minyard
This patch to adds "power cycle" functionality to the IPMI power off module ipmi_poweroff. It also contains changes to support procfs control of the feature. The power cycle action is considered an optional chassis control in the IPMI specification. However, it is definitely useful when the hardware supports it. A power cycle is usually required in order to reset a firmware in a bad state. This action is critical to allow remote management of servers. The implementation adds power cycle as optional to the ipmi_poweroff module. It can be modified dynamically through the proc entry mentioned above. During a power down and enabled, the power cycle command is sent to the BMC firmware. If it fails either due to non-support or some error, it will retry to send the command as power off. Signed-off-by: Christopher A. Poblete <Chris_Poblete@dell.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] ipmi: timer shutdown cleanupCorey Minyard
Clean up the timer shutdown handling in the IPMI driver. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-06-23Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2005-06-23[PATCH] Serial: Bugs are not capabilitiesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-23[PATCH] ARM: 2728/1: S3C2410 - fix constant warning on serial device nameBen Dooks
Patch from Ben Dooks Remove warning of casting `const char *` to a `char *` type. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-23[PATCH] ARM: 2721/1: remove reliance on udivdi3 for pxafb driverNicolas Pitre
Patch from Nicolas Pitre Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 18:23:56 +0000