| Age | Commit message (Collapse) | Author |
|---|
|
When GRO is off, the transport header pointer in sk_buff is
initialized to network's header.
To find the udp header, instead of using udp_hdr() which assumes
skb_network_header was set, manually calculate the udp header offset.
Fixes: 0952da791c97 ("net/mlx5e: Add support for loopback selftest")
Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When receiving an LRO packet, the checksum field is set by the hardware
to the checksum of the first coalesced packet. Obviously, this checksum
is not valid for the merged LRO packet and should be fixed. We can use
the CQE checksum which covers the checksum of the entire merged packet
TCP payload to help us calculate the checksum incrementally.
Tested by sending IPv4/6 traffic with LRO enabled, RX checksum disabled
and watching nstat checksum error counters (in addition to the obvious
bandwidth drop caused by checksum errors).
This bug is usually "hidden" since LRO packets would go through the
CHECKSUM_UNNECESSARY flow which does not validate the packet checksum.
It's important to note that previous to this patch, LRO packets provided
with CHECKSUM_UNNECESSARY are indeed packets with a correct validated
checksum (even though the checksum inside the TCP header is incorrect),
since the hardware LRO aggregation is terminated upon receiving a packet
with bad checksum.
Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
After introduction of commit d0869c0071e4, there were some instances of
RX queue entries from a previous session (before the device was closed
and reopened) returned to the NAPI polling routine. Since the corresponding
socket buffers were freed, this resulted in a panic on reopen. Include
a check for a NULL skb here to avoid this.
Fixes: d0869c0071e4 ("ibmvnic: Clean RX pool buffers during device close")
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
BNXT_RE_FLAG_TASK_IN_PROG doesn't handle multiple work
requests posted together. Track schedule of multiple
workqueue items by maintaining a per device counter
and proceed with IB dereg only if this counter is zero.
flush_workqueue is no longer required from
NETDEV_UNREGISTER path.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
During driver unload, the driver proceeds with cleanup
without waiting for the scheduled events. So the device
pointers get freed up and driver crashes when the events
are scheduled later.
Flush the bnxt_re_task work queue before starting
device removal.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Avoid system crash when destroy_qp is invoked while
the driver is processing the poll_cq. Synchronize these
functions using the cq_lock.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Driver leaves the QP memory pinned if QP create command
fails from the FW. Avoids this scenario by adding a proper
exit path if the FW command fails.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
More testing needs to be done before enabling this feature.
Disabling the feature temporarily
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This reverts commit dbac5d07d13e330e6706813c9fde477140fb5d80.
commit dbac5d07d13e ("usb: musb: host: don't start next rx urb if current one failed")
along with commit b5801212229f ("usb: musb: host: clear rxcsr error bit if set")
try to solve the issue described in [1], but the latter alone is
sufficient, and the former causes the issue as in [2], so now revert it.
[1] https://marc.info/?l=linux-usb&m=146173995117456&w=2
[2] https://marc.info/?l=linux-usb&m=151689238420622&w=2
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On dm3730 there are enumeration problems after resume.
Investigation led to the cause that the MUSB_POWER_SOFTCONN
bit is not set. If it was set before suspend (because it
was enabled via musb_pullup()), it is set in
musb_restore_context() so the pullup is enabled. But then
musb_start() is called which overwrites MUSB_POWER and
therefore disables MUSB_POWER_SOFTCONN, so no pullup is
enabled and the device is not enumerated.
So let's do a subset of what musb_start() does
in the same way as musb_suspend() does it. Platform-specific
stuff it still called as there might be some phy-related stuff
which needs to be enabled.
Also interrupts are enabled, as it was the original idea
of calling musb_start() in musb_resume() according to
Commit 6fc6f4b87cb3 ("usb: musb: Disable interrupts on suspend,
enable them on resume")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We can't request IRQs in atomic context, so for ACPI systems we'll have
to request them up-front, and later associate them with CPUs.
This patch reorganises the arm_pmu code to do so. As we no longer have
the arm_pmu structure at probe time, a number of prototypes need to be
adjusted, requiring changes to the common arm_pmu code and arm_pmu
platform code.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
To support ACPI systems, we need to request IRQs before we know the
associated PMU, and thus we need some percpu variable that the IRQ
handler can find the PMU from.
As we're going to request IRQs without the PMU, we can't rely on the
arm_pmu::active_irqs mask, and similarly need to track requested IRQs
with a percpu variable.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[will: made armpmu_count_irq_users static]
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
To support ACPI systems, we need to request IRQs before CPUs are
hotplugged, and thus we need to request IRQs before we know their
associated PMU.
This is problematic if a PMU IRQ is pending out of reset, as it may be
taken before we know the PMU, and thus the IRQ handler won't be able to
handle it, leaving it screaming.
To avoid such problems, lets request all IRQs in a disabled state, and
explicitly enable/disable them at hotplug time, when we're sure the PMU
has been probed.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The arm_pmu platform code explicitly checks for mismatched PPIs at probe
time, while the ACPI code leaves this to the core code. Future
refactoring will make this difficult for the core code to check, so
let's have the ACPI code check this explicitly.
As before, upon a failure we'll continue on without an interrupt. Ho
hum.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
In ACPI systems, we don't know the makeup of CPUs until we hotplug them
on, and thus have to allocate the PMU datastructures at hotplug time.
Thus, we must use GFP_ATOMIC allocations.
Let's add an armpmu_alloc_atomic() that we can use in this case.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The armpmu_{request,free}_irqs() helpers are only used by
arm_pmu_platform.c, so let's fold them in and make them static.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Now that we have no platforms passing platform data to the arm_pmu code,
we can get rid of the platdata and associated hooks, paving the way for
rework of our IRQ handling.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The plane buffer address/stride/height was incorrectly updated in the
plane_atomic_update operation instead of the vsync irq.
This patch delays this operation in the vsync irq along with the
other plane delayed setup.
This issue was masked using legacy framebuffer and X11 modesetting, but
is clearly visible using gbm rendering when buffer is submitted late after
vblank, like using software decoding and OpenGL rendering in Kodi.
With this patch, tearing and other artifacts disappears completely.
Cc: Michal Lazo <michal.lazo@gmail.com>
Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1518689976-23292-1-git-send-email-narmstrong@baylibre.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
First round of IIO fixes for the 4.16 cycle.
One nasty very old crash around polling for buffers that aren't there
- though that can only cause effects on drivers that support events
but not buffers.
* buffer / kfifo handling in the core.
- Check there is a buffer and return 0 from poll directly if there
isn't. Poll doesn't make sense in this circumstances, but best to close
the hole.
* ad5933
- Change the marked buffer mode to a software buffer as the meaning of
the hardware buffer label has long since changed and this uses a front
end software buffer anyway.
* ad7192
- Fix the fact the external clock frequency was only set when using the
internal clock which was less than helpful.
* adis_lib
- Initialize the trigger before requesting the interrupt. Some newer
parts can power up with interrupt generation enabled so ordering now
matters.
* aspeed-adc
- Fix an errror handling path as labels and general ordering were wrong.
* srf08
- Fix a link error due to undefined devm_iio_triggered_buffer_setup.
* stm32-adc
- Fix error handling unwind squence in stm32h7_adc_enable.
|
|
During eviction, the driver may free more than one hole in the drm_mm
due to the side-effects in evicting the scanned nodes. However,
drm_mm_scan_color_evict() expects that the scan result is the first
available hole (in the mru freed hole_stack list):
kernel BUG at drivers/gpu/drm/drm_mm.c:844!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in: i915 snd_hda_codec_analog snd_hda_codec_generic coretemp snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core lpc_ich snd_pcm e1000e mei_me prime_numbers mei
CPU: 1 PID: 1490 Comm: gem_userptr_bli Tainted: G U 4.16.0-rc1-g740f57c54ecf-kasan_6+ #1
Hardware name: Dell Inc. OptiPlex 755 /0PU052, BIOS A08 02/19/2008
RIP: 0010:drm_mm_scan_color_evict+0x2b8/0x3d0
RSP: 0018:ffff880057a573f8 EFLAGS: 00010287
RAX: ffff8800611f5980 RBX: ffff880057a575d0 RCX: dffffc0000000000
RDX: 00000000029d5000 RSI: 1ffff1000af4aec1 RDI: ffff8800611f5a10
RBP: ffff88005ab884d0 R08: ffff880057a57600 R09: 000000000afff000
R10: 1ffff1000b5710b5 R11: 0000000000001000 R12: 1ffff1000af4ae82
R13: ffff8800611f59b0 R14: ffff8800611f5980 R15: ffff880057a57608
FS: 00007f2de0c2e8c0(0000) GS:ffff88006ac40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2ddde1e000 CR3: 00000000609b2000 CR4: 00000000000006e0
Call Trace:
? drm_mm_scan_remove_block+0x330/0x330
? drm_mm_scan_remove_block+0x151/0x330
i915_gem_evict_something+0x711/0xbd0 [i915]
? igt_evict_contexts+0x50/0x50 [i915]
? nop_clear_range+0x10/0x10 [i915]
? igt_evict_something+0x90/0x90 [i915]
? i915_gem_gtt_reserve+0x1a1/0x320 [i915]
i915_gem_gtt_insert+0x237/0x400 [i915]
__i915_vma_do_pin+0xc25/0x1a20 [i915]
eb_lookup_vmas+0x1c63/0x3790 [i915]
? i915_gem_check_execbuffer+0x250/0x250 [i915]
? trace_hardirqs_on_caller+0x33f/0x590
? _raw_spin_unlock_irqrestore+0x39/0x60
? __pm_runtime_resume+0x7d/0xf0
i915_gem_do_execbuffer+0x86a/0x2ff0 [i915]
? __kmalloc+0x132/0x340
? i915_gem_execbuffer2_ioctl+0x10f/0x760 [i915]
? drm_ioctl_kernel+0x12e/0x1c0
? drm_ioctl+0x662/0x980
? eb_relocate_slow+0xa90/0xa90 [i915]
? i915_gem_execbuffer2_ioctl+0x10f/0x760 [i915]
? __might_fault+0xea/0x1a0
i915_gem_execbuffer2_ioctl+0x3cc/0x760 [i915]
? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915]
? lock_acquire+0x3c0/0x3c0
? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915]
drm_ioctl_kernel+0x12e/0x1c0
drm_ioctl+0x662/0x980
? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915]
? drm_getstats+0x20/0x20
? debug_check_no_obj_freed+0x2a6/0x8c0
do_vfs_ioctl+0x170/0xe70
? ioctl_preallocate+0x170/0x170
? task_work_run+0xbe/0x160
? lock_acquire+0x3c0/0x3c0
? trace_hardirqs_on_caller+0x33f/0x590
? _raw_spin_unlock_irq+0x2f/0x50
SyS_ioctl+0x36/0x70
? do_vfs_ioctl+0xe70/0xe70
do_syscall_64+0x18c/0x5d0
entry_SYSCALL_64_after_hwframe+0x26/0x9b
RIP: 0033:0x7f2ddf13b587
RSP: 002b:00007fff15c4f9d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f2ddf13b587
RDX: 00007fff15c4fa20 RSI: 0000000040406469 RDI: 0000000000000003
RBP: 00007fff15c4fa20 R08: 0000000000000000 R09: 00007f2ddf3fe120
R10: 0000000000000073 R11: 0000000000000246 R12: 0000000040406469
R13: 0000000000000003 R14: 00007fff15c4fa20 R15: 00000000000000c7
Code: 00 00 00 4a c7 44 22 08 00 00 00 00 42 c7 44 22 10 00 00 00 00 48 81 c4 b8 00 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 0f 0b 0f 0b <0f> 0b 31 c0 eb c0 4c 89 ef e8 9a 09 41 ff e9 1e fe ff ff 4c 89
RIP: drm_mm_scan_color_evict+0x2b8/0x3d0 RSP: ffff880057a573f8
We can trivially relax this assumption by searching the hole_stack for
the scan result and warn instead if the driver called us without any
result.
Fixes: 3fa489dabea9 ("drm: Apply tight eviction scanning to color_adjust")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.11+
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180219113543.8010-1-chris@chris-wilson.co.uk
|
|
Add cannon point device ids for 4th (itouch) device.
Cc: <stable@vger.kernel.org> 4.14+
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add CNP LP and CNP H device ids for cannon lake
and coffee lake platforms.
Cc: <stable@vger.kernel.org> 4.14+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-linus
Chanwoo writes:
Update extcon for v4.16-rc3
This patch fixes issue of X-power extcon-axp288 and Intel extcon-int3496 driver.
- For extcon-int3496 driver,
Process id-pin first so that we start with the right status in order to fix
a race where the initial work might still be running while other drivers
were already calling extcon_get_state().
- For extcon-axp288 driver,
Revert the patch[1] which were applied to v4.16-rc1 because there are better
ways with usb-role-switch and constify the axp288_pwr_up_down_info array.
[1] 60ed99961469a3 ("extcon: axp288: Redo charger type detection a couple of seconds after probe()")
|
|
Bit field [2:0] of HDMI_I2S_PIN_SEL_1 corresponds to SDATA_0,
not SDATA_2. This patch removes redefinition of HDMI_I2S_SEL_DATA2
constant and adds missing HDMI_I2S_SEL_DATA0.
The value of bit field selecting SDATA_1 (pin_sel_3) is also changed,
so it is 3 as suggested in the Exynos TRMs.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Since its inclusion in 2012 via commit bea8a429d91a ("drm/exynos: add rotator ipp driver")
this header is not used by any source files and is empty.
Lets just remove it.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
two functions
Omit an extra message for a memory allocation failure in these functions.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Due to a typo, the mask was destroyed by a comparison instead of a bit
shift.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The exynos DRM driver uses real-time 'struct timeval' values
for exporting its timestamps to user space. This has multiple
problems:
1. signed seconds overflow in y2038
2. the 'struct timeval' definition is deprecated in the kernel
3. time may jump or go backwards after a 'settimeofday()' syscall
4. other DRM timestamps are in CLOCK_MONOTONIC domain, so they
can't be compared
5. exporting microseconds requires a division by 1000, which may
be slow on some architectures.
The code existed in two places before, but the IPP portion was
removed in 8ded59413ccc ("drm/exynos: ipp: Remove Exynos DRM
IPP subsystem"), so we no longer need to worry about it.
Ideally timestamps should just use 64-bit nanoseconds instead, but
of course we can't change that now. Instead, this tries to address
the first four points above by using monotonic 'timespec' values.
According to Tobias Jakobi, user space doesn't care about the
timestamp at the moment, so we can change the format. Even if
there is something looking at them, it will work just fine with
monotonic times as long as the application only looks at the
relative values between two events.
Link: https://patchwork.kernel.org/patch/10038593/
Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Pull networking fixes from David Miller:
1) Prevent index integer overflow in ptr_ring, from Jason Wang.
2) Program mvpp2 multicast filter properly, from Mikulas Patocka.
3) The bridge brport attribute file is write only and doesn't have a
->show() method, don't blindly invoke it. From Xin Long.
4) Inverted mask used in genphy_setup_forced(), from Ingo van Lil.
5) Fix multiple definition issue with if_ether.h UAPI header, from
Hauke Mehrtens.
6) Fix GFP_KERNEL usage in atomic in RDS protocol code, from Sowmini
Varadhan.
7) Revert XDP redirect support from thunderx driver, it is not
implemented properly. From Jesper Dangaard Brouer.
8) Fix missing RTNL protection across some tipc operations, from Ying
Xue.
9) Return the correct IV bytes in the TLS getsockopt code, from Boris
Pismenny.
10) Take tclassid into consideration properly when doing FIB rule
matching. From Stefano Brivio.
11) cxgb4 device needs more PCI VPD quirks, from Casey Leedom.
12) TUN driver doesn't align frags properly, and we can end up doing
unaligned atomics on misaligned metadata. From Eric Dumazet.
13) Fix various crashes found using DEBUG_PREEMPT in rmnet driver, from
Subash Abhinov Kasiviswanathan.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits)
tg3: APE heartbeat changes
mlxsw: spectrum_router: Do not unconditionally clear route offload indication
net: qualcomm: rmnet: Fix possible null dereference in command processing
net: qualcomm: rmnet: Fix warning seen with 64 bit stats
net: qualcomm: rmnet: Fix crash on real dev unregistration
sctp: remove the left unnecessary check for chunk in sctp_renege_events
rxrpc: Work around usercopy check
tun: fix tun_napi_alloc_frags() frag allocator
udplite: fix partial checksum initialization
skbuff: Fix comment mis-spelling.
dn_getsockoptdecnet: move nf_{get/set}sockopt outside sock lock
PCI/cxgb4: Extend T3 PCI quirk to T4+ devices
cxgb4: fix trailing zero in CIM LA dump
cxgb4: free up resources of pf 0-3
fib_semantics: Don't match route with mismatching tclassid
NFC: llcp: Limit size of SDP URI
tls: getsockopt return record sequence number
tls: reset the crypto info if copy_from_user fails
tls: retrun the correct IV in getsockopt
docs: segmentation-offloads.txt: add SCTP info
...
|
|
In ungraceful host shutdown or driver crash case BMC connectivity is
lost. APE firmware is missing the driver state in this
case to keep the BMC connectivity alive.
This patch has below change to address this issue.
Heartbeat mechanism with APE firmware. This heartbeat mechanism
is needed to notify the APE firmware about driver state.
This patch also has the change in wait time for APE event from
1ms to 20ms as there can be some delay in getting response.
v2: Drop inline keyword as per David suggestion.
Signed-off-by: Prashant Sreedharan <prashant.sreedharan@broadcom.com>
Signed-off-by: Satish Baddipadige <satish.baddipadige@broadcom.com>
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When mlxsw replaces (or deletes) a route it removes the offload
indication from the replaced route. This is problematic for IPv4 routes,
as the offload indication is stored in the fib_info which is usually
shared between multiple routes.
Instead of unconditionally clearing the offload indication, only clear
it if no other route is using the fib_info.
Fixes: 3984d1a89fe7 ("mlxsw: spectrum_router: Provide offload indication using nexthop flags")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Alexander Petrovskiy <alexpe@mellanox.com>
Tested-by: Alexander Petrovskiy <alexpe@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If a command packet with invalid mux id is received, the packet would
not have a valid endpoint. This invalid endpoint maybe dereferenced
leading to a crash. Identified by manual code inspection.
Fixes: 3352e6c45760 ("net: qualcomm: rmnet: Convert the muxed endpoint to hlist")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With CONFIG_DEBUG_PREEMPT enabled, a warning was seen on device
creation. This occurs due to the incorrect cpu API usage in
ndo_get_stats64 handler.
BUG: using smp_processor_id() in preemptible [00000000] code: rmnetcli/5743
caller is debug_smp_processor_id+0x1c/0x24
Call trace:
[<ffffff9d48c8967c>] dump_backtrace+0x0/0x2a8
[<ffffff9d48c89bbc>] show_stack+0x20/0x28
[<ffffff9d4901fff8>] dump_stack+0xa8/0xe0
[<ffffff9d490421e0>] check_preemption_disabled+0x104/0x108
[<ffffff9d49042200>] debug_smp_processor_id+0x1c/0x24
[<ffffff9d494a36b0>] rmnet_get_stats64+0x64/0x13c
[<ffffff9d49b014e0>] dev_get_stats+0x68/0xd8
[<ffffff9d49d58df8>] rtnl_fill_stats+0x54/0x140
[<ffffff9d49b1f0b8>] rtnl_fill_ifinfo+0x428/0x9cc
[<ffffff9d49b23834>] rtmsg_ifinfo_build_skb+0x80/0xf4
[<ffffff9d49b23930>] rtnetlink_event+0x88/0xb4
[<ffffff9d48cd21b4>] raw_notifier_call_chain+0x58/0x78
[<ffffff9d49b028a4>] call_netdevice_notifiers_info+0x48/0x78
[<ffffff9d49b08bf8>] __netdev_upper_dev_link+0x290/0x5e8
[<ffffff9d49b08fcc>] netdev_master_upper_dev_link+0x3c/0x48
[<ffffff9d494a2e74>] rmnet_newlink+0xf0/0x1c8
[<ffffff9d49b23360>] rtnl_newlink+0x57c/0x6c8
[<ffffff9d49b2355c>] rtnetlink_rcv_msg+0xb0/0x244
[<ffffff9d49b5230c>] netlink_rcv_skb+0xb4/0xdc
[<ffffff9d49b204f4>] rtnetlink_rcv+0x34/0x44
[<ffffff9d49b51af0>] netlink_unicast+0x1ec/0x294
[<ffffff9d49b51fdc>] netlink_sendmsg+0x320/0x390
[<ffffff9d49ae6858>] sock_sendmsg+0x54/0x60
[<ffffff9d49ae91bc>] SyS_sendto+0x1a0/0x1e4
[<ffffff9d48c83770>] el0_svc_naked+0x24/0x28
Fixes: 192c4b5d48f2 ("net: qualcomm: rmnet: Add support for 64 bit stats")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With CONFIG_DEBUG_PREEMPT enabled, a crash with the following call
stack was observed when removing a real dev which had rmnet devices
attached to it.
To fix this, remove the netdev_upper link APIs and instead use the
existing information in rmnet_port and rmnet_priv to get the
association between real and rmnet devs.
BUG: sleeping function called from invalid context
in_atomic(): 0, irqs_disabled(): 0, pid: 5762, name: ip
Preemption disabled at:
[<ffffff9d49043564>] debug_object_active_state+0xa4/0x16c
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
PC is at ___might_sleep+0x13c/0x180
LR is at ___might_sleep+0x17c/0x180
[<ffffff9d48ce0924>] ___might_sleep+0x13c/0x180
[<ffffff9d48ce09c0>] __might_sleep+0x58/0x8c
[<ffffff9d49d6253c>] mutex_lock+0x2c/0x48
[<ffffff9d48ed4840>] kernfs_remove_by_name_ns+0x48/0xa8
[<ffffff9d48ed6ec8>] sysfs_remove_link+0x30/0x58
[<ffffff9d49b05840>] __netdev_adjacent_dev_remove+0x14c/0x1e0
[<ffffff9d49b05914>] __netdev_adjacent_dev_unlink_lists+0x40/0x68
[<ffffff9d49b08820>] netdev_upper_dev_unlink+0xb4/0x1fc
[<ffffff9d494a29f0>] rmnet_dev_walk_unreg+0x6c/0xc8
[<ffffff9d49b00b40>] netdev_walk_all_lower_dev_rcu+0x58/0xb4
[<ffffff9d494a30fc>] rmnet_config_notify_cb+0xf4/0x134
[<ffffff9d48cd21b4>] raw_notifier_call_chain+0x58/0x78
[<ffffff9d49b028a4>] call_netdevice_notifiers_info+0x48/0x78
[<ffffff9d49b0b568>] rollback_registered_many+0x230/0x3c8
[<ffffff9d49b0b738>] unregister_netdevice_many+0x38/0x94
[<ffffff9d49b1e110>] rtnl_delete_link+0x58/0x88
[<ffffff9d49b201dc>] rtnl_dellink+0xbc/0x1cc
[<ffffff9d49b2355c>] rtnetlink_rcv_msg+0xb0/0x244
[<ffffff9d49b5230c>] netlink_rcv_skb+0xb4/0xdc
[<ffffff9d49b204f4>] rtnetlink_rcv+0x34/0x44
[<ffffff9d49b51af0>] netlink_unicast+0x1ec/0x294
[<ffffff9d49b51fdc>] netlink_sendmsg+0x320/0x390
[<ffffff9d49ae6858>] sock_sendmsg+0x54/0x60
[<ffffff9d49ae6f94>] ___sys_sendmsg+0x298/0x2b0
[<ffffff9d49ae98f8>] SyS_sendmsg+0xb4/0xf0
[<ffffff9d48c83770>] el0_svc_naked+0x24/0x28
Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Fixes: 60d58f971c10 ("net: qualcomm: rmnet: Implement bridge mode")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similar to commit e10aec652f31 ("drm/edid: Add 6 bpc quirk for display
AEO model 0."), the EDID reports "DFP 1.x compliant TMDS" but it support
6bpc instead of 8 bpc.
Hence, use 6 bpc quirk for this panel.
Fixes: 196f954e2509 ("drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability is unknown"")
BugLink: https://bugs.launchpad.net/bugs/1749420
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180218085359.7817-1-kai.heng.feng@canonical.com
|
|
The 10/12-bit config used for bayer formats is used for grayscale as
well.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Add the missing offset calculation for 16-bit grayscale images. Since
the IPU only supports capturing greyscale in raw passthrough mode, it
is the same as 16-bit bayer formats.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Before returning, call of_node_put() for the device node returned by
of_parse_phandle().
Fixes: ea9c260514c1 ("gpu: ipu-v3: add driver for Prefetch Resolve Gasket")
Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Before returning, call of_node_put() for the device node returned by
of_parse_phandle().
Fixes: d2a34232580a ("gpu: ipu-v3: add driver for Prefetch Resolve Engine")
Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
We're obviously not part of a memory reclaim path, so don't set the flag.
This also causes a warning in check_flush_dependency() since we end up
in a code path that flushes a non-reclaim workqueue, and we shouldn't do
that if we were really part of reclaim.
Reported-by: syzbot+41cdaf4232c50e658934@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"A small set of updates mostly for irq chip drivers:
- MIPS GIC fix for spurious, masked interrupts
- fix for a subtle IPI bug in GICv3
- do not probe GICv3 ITSs that are marked as disabled
- multi-MSI support for GICv2m
- various small cleanups"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqdomain: Re-use DEFINE_SHOW_ATTRIBUTE() macro
irqchip/bcm: Remove hashed address printing
irqchip/gic-v2m: Add PCI Multi-MSI support
irqchip/gic-v3: Ignore disabled ITS nodes
irqchip/gic-v3: Use wmb() instead of smb_wmb() in gic_raise_softirq()
irqchip/gic-v3: Change pr_debug message to pr_devel
irqchip/mips-gic: Avoid spuriously handling masked interrupts
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request from Keith, with fixes all over the map for nvme.
From various folks.
- Classic polling fix, that avoids a latency issue where we still end
up waiting for an interrupt in some cases. From Nitesh Shetty.
- Comment typo fix from Minwoo Im.
* tag 'for-linus-20180217' of git://git.kernel.dk/linux-block:
block: fix a typo in comment of BLK_MQ_POLL_STATS_BKTS
nvme-rdma: fix sysfs invoked reset_ctrl error flow
nvmet: Change return code of discard command if not supported
nvme-pci: Fix timeouts in connecting state
nvme-pci: Remap CMB SQ entries on every controller reset
nvme: fix the deadlock in nvme_update_formats
blk: optimization for classic polling
nvme: Don't use a stack buffer for keep-alive command
nvme_fc: cleanup io completion
nvme_fc: correct abort race condition on resets
nvme: Fix discard buffer overrun
nvme: delete NVME_CTRL_LIVE --> NVME_CTRL_CONNECTING transition
nvme-rdma: use NVME_CTRL_CONNECTING state to mark init process
nvme: rename NVME_CTRL_RECONNECTING state to NVME_CTRL_CONNECTING
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- meson-gx: Revert to earlier tuning process
- bcm2835: Don't overwrite max frequency unconditionally
* tag 'mmc-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: bcm2835: Don't overwrite max frequency unconditionally
Revert "mmc: meson-gx: include tx phase in the tuning process"
|
|
Pull mtd fixes from Boris Brezillon:
- add missing dependency to NAND_MARVELL Kconfig entry
- use the appropriate OOB layout in the VF610 driver
* tag 'mtd/fixes-for-4.16-rc2' of git://git.infradead.org/linux-mtd:
mtd: nand: MTD_NAND_MARVELL should depend on HAS_DMA
mtd: nand: vf610: set correct ooblayout
|
|
If no iio buffer has been set up and poll is called return 0.
Without this check there will be a null pointer dereference when
calling poll on a iio driver without an iio buffer.
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Windfeldt-Prytz <stefan.windfeldt@axis.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The adis_probe_trigger() creates a new IIO trigger and requests an
interrupt associated with the trigger. The interrupt uses the generic
iio_trigger_generic_data_rdy_poll() function as its interrupt handler.
Currently the driver initializes some fields of the trigger structure after
the interrupt has been requested. But an interrupt can fire as soon as it
has been requested. This opens up a race condition.
iio_trigger_generic_data_rdy_poll() will access the trigger data structure
and dereference the ops field. If the ops field is not yet initialized this
will result in a NULL pointer deref.
It is not expected that the device generates an interrupt at this point, so
typically this issue did not surface unless e.g. due to a hardware
misconfiguration (wrong interrupt number, wrong polarity, etc.).
But some newer devices from the ADIS family start to generate periodic
interrupts in their power-on reset configuration and unfortunately the
interrupt can not be masked in the device. This makes the race condition
much more visible and the following crash has been observed occasionally
when booting a system using the ADIS16460.
Unable to handle kernel NULL pointer dereference at virtual address 00000008
pgd = c0004000
[00000008] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-04126-gf9739f0-dirty #257
Hardware name: Xilinx Zynq Platform
task: ef04f640 task.stack: ef050000
PC is at iio_trigger_notify_done+0x30/0x68
LR is at iio_trigger_generic_data_rdy_poll+0x18/0x20
pc : [<c042d868>] lr : [<c042d924>] psr: 60000193
sp : ef051bb8 ip : 00000000 fp : ef106400
r10: c081d80a r9 : ef3bfa00 r8 : 00000087
r7 : ef051bec r6 : 00000000 r5 : ef3bfa00 r4 : ee92ab00
r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : ee97e400
Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none
Control: 18c5387d Table: 0000404a DAC: 00000051
Process swapper/0 (pid: 1, stack limit = 0xef050210)
[<c042d868>] (iio_trigger_notify_done) from [<c0065b10>] (__handle_irq_event_percpu+0x88/0x118)
[<c0065b10>] (__handle_irq_event_percpu) from [<c0065bbc>] (handle_irq_event_percpu+0x1c/0x58)
[<c0065bbc>] (handle_irq_event_percpu) from [<c0065c30>] (handle_irq_event+0x38/0x5c)
[<c0065c30>] (handle_irq_event) from [<c0068e28>] (handle_level_irq+0xa4/0x130)
[<c0068e28>] (handle_level_irq) from [<c0064e74>] (generic_handle_irq+0x24/0x34)
[<c0064e74>] (generic_handle_irq) from [<c021ab7c>] (zynq_gpio_irqhandler+0xb8/0x13c)
[<c021ab7c>] (zynq_gpio_irqhandler) from [<c0064e74>] (generic_handle_irq+0x24/0x34)
[<c0064e74>] (generic_handle_irq) from [<c0065370>] (__handle_domain_irq+0x5c/0xb4)
[<c0065370>] (__handle_domain_irq) from [<c000940c>] (gic_handle_irq+0x48/0x8c)
[<c000940c>] (gic_handle_irq) from [<c0013e8c>] (__irq_svc+0x6c/0xa8)
To fix this make sure that the trigger is fully initialized before
requesting the interrupt.
Fixes: ccd2b52f4ac6 ("staging:iio: Add common ADIS library")
Reported-by: Robin Getz <Robin.Getz@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Passive sockets can have ongoing operations on them, specifically, we
have two wait_event_interruptable calls in pvcalls_front_accept.
Add two wake_up calls in pvcalls_front_release, then wait for the
potential waiters to return and release the sock_mapping refcount.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Introduce a per sock_mapping refcount, in addition to the existing
global refcount. Thanks to the sock_mapping refcount, we can safely wait
for it to be 1 in pvcalls_front_release before freeing an active socket,
instead of waiting for the global refcount to be 1.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Commit fd8aa9095a95 ("xen: optimize xenbus driver for multiple concurrent
xenstore accesses") optimized xenbus concurrent accesses but in doing so
broke UABI of /dev/xen/xenbus. Through /dev/xen/xenbus applications are in
charge of xenbus message exchange with the correct header and body. Now,
after the mentioned commit the replies received by application will no
longer have the header req_id echoed back as it was on request (see
specification below for reference), because that particular field is being
overwritten by kernel.
struct xsd_sockmsg
{
uint32_t type; /* XS_??? */
uint32_t req_id;/* Request identifier, echoed in daemon's response. */
uint32_t tx_id; /* Transaction id (0 if not related to a transaction). */
uint32_t len; /* Length of data following this. */
/* Generally followed by nul-terminated string(s). */
};
Before there was only one request at a time so req_id could simply be
forwarded back and forth. To allow simultaneous requests we need a
different req_id for each message thus kernel keeps a monotonic increasing
counter for this field and is written on every request irrespective of
userspace value.
Forwarding again the req_id on userspace requests is not a solution because
we would open the possibility of userspace-generated req_id colliding with
kernel ones. So this patch instead takes another route which is to
artificially keep user req_id while keeping the xenbus logic as is. We do
that by saving the original req_id before xs_send(), use the private kernel
counter as req_id and then once reply comes and was validated, we restore
back the original req_id.
Cc: <stable@vger.kernel.org> # 4.11
Fixes: fd8aa9095a ("xen: optimize xenbus driver for multiple concurrent xenstore accesses")
Reported-by: Bhavesh Davda <bhavesh.davda@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
amdgpu's ->runtime_suspend hook calls drm_kms_helper_poll_disable(),
which waits for the output poll worker to finish if it's running.
The output poll worker meanwhile calls pm_runtime_get_sync() in
amdgpu's ->detect hooks, which waits for the ongoing suspend to finish,
causing a deadlock.
Fix by not acquiring a runtime PM ref if the ->detect hooks are called
in the output poll worker's context. This is safe because the poll
worker is only enabled while runtime active and we know that
->runtime_suspend waits for it to finish.
Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Cc: stable@vger.kernel.org # v4.2+: 27d4ee03078a: workqueue: Allow retrieval of current task's work struct
Cc: stable@vger.kernel.org # v4.2+: 25c058ccaf2e: drm: Allow determining if current task is output poll worker
Cc: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://patchwork.freedesktop.org/patch/msgid/4c9bf72aacae1eef062bd134cd112e0770a7f121.1518338789.git.lukas@wunner.de
|
