summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-08-31ath9k_hw: Fix EEPROM uncompress block reading on AR9003Luis R. Rodriguez
The EEPROM is compressed on AR9003, upon decompression the wrong upper limit was being used for the block which prevented the 5 GHz CTL indexes from being used, which are stored towards the end of the EEPROM block. This fix allows the actual intended regulatory limits to be used on AR9003 hardware. Cc: stable@kernel.org [2.6.36+] Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-30p54: fix tx feedback status flag checkChristian Lamparter
Michael reported that p54* never really entered power save mode, even tough it was enabled. It turned out that upon a power save mode change the firmware will set a special flag onto the last outgoing frame tx status (which in this case is almost always the designated PSM nullfunc frame). This flag confused the driver; It erroneously reported transmission failures to the stack, which then generated the next nullfunc. and so on... Cc: <stable@kernel.org> Reported-by: Michael Buesch <mb@bu3sch.de> Tested-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-30ath5k: check return value of ieee80211_get_tx_rateJohn W. Linville
This avoids a NULL pointer dereference as reported here: https://bugzilla.redhat.com/show_bug.cgi?id=625889 When the WARN condition is hit in ieee80211_get_tx_rate, it will return NULL. So, we need to check the return value and avoid dereferencing it in that case. Signed-off-by: John W. Linville <linville@tuxdriver.com> Cc: stable@kernel.org Acked-by: Bob Copeland <me@bobcopeland.com>
2010-08-27libertas: if_sdio: fix buffer alignment in struct if_sdio_cardMike Rapoport
The commit 886275ce41a9751117367fb387ed171049eb6148 (param: lock if_sdio's lbs_helper_name and lbs_fw_name against sysfs changes) introduced new fields into the if_sdio_card structure. It caused missalignment of the if_sdio_card.buffer field and failure at driver load time: ~# modprobe libertas_sdio [ 62.315124] libertas_sdio: Libertas SDIO driver [ 62.319976] libertas_sdio: Copyright Pierre Ossman [ 63.020629] DMA misaligned error with device 48 [ 63.025207] mmci-omap-hs mmci-omap-hs.1: unexpected dma status 800 [ 66.005035] libertas: command 0x0003 timed out [ 66.009826] libertas: Timeout submitting command 0x0003 [ 66.016296] libertas: PREP_CMD: command 0x0003 failed: -110 Adding explicit alignment attribute for the if_sdio_card.buffer field fixes this problem. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-18iwlwifi: use long monitor timer for 5300 seriesWey-Yi Guy
For 5000 series of devices, use long monitor timer to check stuck tx queues. This modification apply to all the 5000 series including 5300 and others. Cc: stable@kernel.org [2.6.35] Reported-by: drago01 <drago01@gmail.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-18drivers/net/wireless: Restore upper case words in wiphy_<level> messagesJoe Perches
Commit c96c31e499b70964cfc88744046c998bb710e4b8 "(drivers/net/wireless: Use wiphy_<level>)" inadvertently changed some upper case words to lower case. Restore the original case. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-17iwlwifi: fix 3945 filter flagsJohannes Berg
Applying the filter flags directly as done since commit 3474ad635db371b0d8d0ee40086f15d223d5b6a4 Author: Johannes Berg <johannes.berg@intel.com> Date: Thu Apr 29 04:43:05 2010 -0700 iwlwifi: apply filter flags directly broke 3945 under some unknown circumstances, as reported by Alex. Since I want to keep the direct application of filter flags on iwlagn, duplicate the code into both 3945 and agn and remove committing the RXON that broke things from the 3945 version. Cc: stable@kernel.org [2.6.35] Reported-by: Alex Romosan <romosan@sycorax.lbl.gov> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-17ipw2100: don't sync status queue entriesJohn W. Linville
These are allocated with pci_alloc_consistent, so calling pci_dma_sync_single_for_cpu is incorrect usage of the API. Remove this misuse and consequently avoid the following backtrace: WARNING: at lib/dma-debug.c:902 check_sync+0xce/0x43a() Hardware name: 2373HU6 ipw2100 0000:02:02.0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x0000000034e88008] [size=8 bytes] Modules linked in: microcode ipw2100(+) snd_seq_device ppdev libipw nsc_ircc snd_pcm lib80211 video output irda parport_pc cfg80211 parport thinkpad_acpi e1000 iTCO_wdt crc_ccitt snd_timer iTCO_vendor_support snd i2c_i801 pcspkr rfkill soundcore joydev snd_page_alloc yenta_socket radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core [last unloaded: scsi_wait_scan] Pid: 0, comm: swapper Tainted: G W 2.6.35-wl+ #8 Call Trace: [<c043aa42>] warn_slowpath_common+0x6a/0x7f [<c05d252a>] ? check_sync+0xce/0x43a [<c043aaca>] warn_slowpath_fmt+0x2b/0x2f [<c05d252a>] check_sync+0xce/0x43a [<c046189a>] ? print_lock_contention_bug+0x11/0xb2 [<c05d2b6f>] debug_dma_sync_single_for_cpu+0x47/0x49 [<c06cbd3c>] ? ehci_irq+0x31/0x331 [<f82a224a>] ? ipw2100_irq_tasklet+0x24/0x5e9 [ipw2100] [<f82a224a>] ? ipw2100_irq_tasklet+0x24/0x5e9 [ipw2100] [<f82a221d>] pci_dma_sync_single_for_cpu.clone.1+0x42/0x4b [ipw2100] [<f82a23a2>] ipw2100_irq_tasklet+0x17c/0x5e9 [ipw2100] [<c043fd87>] tasklet_action+0x78/0xcb [<c0440293>] __do_softirq+0xc4/0x183 [<c044038d>] do_softirq+0x3b/0x5f [<c04404d0>] irq_exit+0x3a/0x6d [<c0404423>] do_IRQ+0x8b/0x9f [<c04038b5>] common_interrupt+0x35/0x3c [<c062ecfa>] ? acpi_idle_enter_simple+0xfe/0x13c [<c045007b>] ? exit_itimers+0x2d/0x73 [<c062ecfc>] ? acpi_idle_enter_simple+0x100/0x13c [<c070bf10>] cpuidle_idle_call+0x78/0xdc [<c040251c>] cpu_idle+0x9b/0xb7 [<c07b1dd2>] rest_init+0xa6/0xab [<c0a4b96d>] start_kernel+0x389/0x38e [<c0a4b0c9>] i386_start_kernel+0xc9/0xd0 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-14iwlwifi: use long monitor timer to avoid un-necessary reloadWey-Yi Guy
For 5000 and 6000g2b series of devices, use long monitor timer to check stuck tx queues. .6000g2b series device, it is WiFi/BT combo device, there are some cases, tx queues are not move for a period of time because the WiFi/BT coex. .5000 series device, it is being reported firmware got reload more often than necessary, so extend the timer to avoid un-necessary reload. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-14iwlwifi: long monitor timerWey-Yi Guy
Change the name for monitor timer, also adding define for long monitor timer; long monitor timer can be used for the type of devices require longer time to determine the uCode is stuck on tx and needed reload. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-13ath5k: disable ASPM L0s for all cardsMaxim Levitsky
Atheros PCIe wireless cards handled by ath5k do require L0s disabled. For distributions shipping with CONFIG_PCIEASPM (this will be enabled by default in the future in 2.6.36) this will also mean both L1 and L0s will be disabled when a pre 1.1 PCIe device is detected. We do know L1 works correctly even for all ath5k pre 1.1 PCIe devices though but cannot currently undue the effect of a blacklist, for details you can read pcie_aspm_sanity_check() and see how it adjusts the device link capability. It may be possible in the future to implement some PCI API to allow drivers to override blacklists for pre 1.1 PCIe but for now it is best to accept that both L0s and L1 will be disabled completely for distributions shipping with CONFIG_PCIEASPM rather than having this issue present. Motivation for adding this new API will be to help with power consumption for some of these devices. Example of issues you'd see: - On the Acer Aspire One (AOA150, Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)) doesn't work well with ASPM enabled, the card will eventually stall on heavy traffic with often 'unsupported jumbo' warnings appearing. Disabling ASPM L0s in ath5k fixes these problems. - On the same card you would see a storm of RXORN interrupts even though medium is idle. Credit for root causing and fixing the bug goes to Jussi Kivilinna. Cc: David Quan <David.Quan@atheros.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tim Gardner <tim.gardner@canonical.com> Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-13ath9k_htc: load proper firmware for device ID 7015Rajkumar Manoharan
This patch handles the firmware loading properly for device ID 7015. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-13wl1251: fix trigger scan timeout usageYuri Kululin
Use appropriate command (CMD_TRIGGER_SCAN_TO) instead of scan command (CMD_SCAN) to configure trigger scan timeout. This was broken in commit 3a98c30f3e8bb1f32b5bcb74a39647b3670de275. This fix address the bug reported here: https://bugzilla.kernel.org/show_bug.cgi?id=16554 Cc: stable@kernel.org Signed-off-by: Yuri Ershov <ext-yuri.ershov@nokia.com> Signed-off-by: Yuri Kululin <ext-yuri.kululin@nokia.com> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-13ath9k_htc: Fix disconnect issue in HT40 mode.Vivek Natarajan
Some APs advertise that they may be HT40 capable in the capabilites but the current operating channel configuration may be only HT20. This causes disconnection as ath9k_htc sets WLAN_RC_40_FLAG despite the AP operating in HT20 mode. Hence set this flag only if the current channel configuration is HT40 enabled. Cc: stable@kernel.org Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-11ath9k_htc: fix panic on packet injection using airbase-ng tool.Rajkumar Manoharan
This should fix the oops which occurs during the packet injection on monitor interface. EIP is at ath9k_htc_tx_start+0x69/0x220 [ath9k_htc] [<f84dc8ea>] ? invoke_tx_handlers+0xa5a/0xee0 [mac80211] [<f82c84f4>] ? ath9k_htc_tx+0x44/0xe0 [ath9k_htc] [<f84db7b8>] ? __ieee80211_tx+0xf8/0x190 [mac80211] [<f84dce0d>] ? ieee80211_tx+0x9d/0x1a0 [mac80211] [<f84dcfac>] ? ieee80211_xmit+0x9c/0x1c0 [mac80211] [<f84dd1b5>] ? ieee80211_monitor_start_xmit+0x85/0xb0 [mac80211] [<c04c30cd>] ? dev_hard_start_xmit+0x1ad/0x210 [<c04b97c2>] ? __alloc_skb+0x52/0x130 [<c04d7cd5>] ? sch_direct_xmit+0x105/0x170 [<c04c5e9f>] ? dev_queue_xmit+0x37f/0x4b0 [<c0567e1e>] ? packet_snd+0x21e/0x250 [<c05684a2>] ? packet_sendmsg+0x32/0x40 [<c04b4c63>] ? sock_aio_write+0x113/0x130 [<c0207934>] ? do_sync_write+0xc4/0x100 [<c0167740>] ? autoremove_wake_function+0x0/0x50 [<c02f4414>] ? security_file_permission+0x14/0x20 [<c0207ad4>] ? rw_verify_area+0x64/0xe0 [<c01e6458>] ? handle_mm_fault+0x338/0x390 [<c0207cd5>] ? vfs_write+0x185/0x1a0 [<c058db20>] ? do_page_fault+0x160/0x3a0 [<c0208512>] ? sys_write+0x42/0x70 [<c01033ec>] ? syscall_call+0x7/0xb Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-11ipw2100: register pm_qos request before registering pci driverJohn W. Linville
It is necessary to call pm_qos_add_request prior to calling pm_qos_update_request. It was revealed that ipw2100 has been doing this wrong since "pm_qos: Get rid of the allocation in pm_qos_add_request()" (commit 82f682514a5df89ffb3890627eebf0897b7a84ec) added a WARN that results in the following backtrace: WARNING: at kernel/pm_qos_params.c:264 pm_qos_update_request+0x5e/0x70() pm_qos_update_request() called for unknown object Call Trace: [<c1024088>] ? warn_slowpath_common+0x78/0xb0 [<c1041c9e>] ? pm_qos_update_request+0x5e/0x70 [<c1041c9e>] ? pm_qos_update_request+0x5e/0x70 [<c1024153>] ? warn_slowpath_fmt+0x33/0x40 [<c1041c9e>] ? pm_qos_update_request+0x5e/0x70 [<f89fe15f>] ? ipw2100_up+0x3f/0xf10 [ipw2100] [<c11961c9>] ? vsnprintf+0xc9/0x530 [<f89ff36c>] ? ipw2100_net_init+0x2c/0x1c0 [ipw2100] [<c12f542d>] ? register_netdevice+0x7d/0x3c0 [<f89f9b00>] ? ipw2100_irq_tasklet+0x910/0x9a0 [ipw2100] [<c12f579f>] ? register_netdev+0x2f/0x40 [<f89fd471>] ? ipw2100_pci_init_one+0xd21/0x1060 [ipw2100] [<c11a5ebb>] ? local_pci_probe+0xb/0x10 [<c11a6d49>] ? pci_device_probe+0x69/0x90 [<c1224704>] ? driver_probe_device+0x74/0x180 [<c10dd15a>] ? sysfs_create_dir+0x6a/0xb0 [<c1224889>] ? __driver_attach+0x79/0x80 [<c1224810>] ? __driver_attach+0x0/0x80 [<c1223fa2>] ? bus_for_each_dev+0x52/0x80 [<c1224586>] ? driver_attach+0x16/0x20 [<c1224810>] ? __driver_attach+0x0/0x80 [<c122395f>] ? bus_add_driver+0x17f/0x250 [<c11a5ec0>] ? pci_device_shutdown+0x0/0x20 [<c11a6c80>] ? pci_device_remove+0x0/0x40 [<c1224b13>] ? driver_register+0x63/0x120 [<c11a6f96>] ? __pci_register_driver+0x36/0xa0 [<f84f9048>] ? ipw2100_init+0x48/0x67 [ipw2100] [<c1001122>] ? do_one_initcall+0x32/0x170 [<c1087078>] ? __vunmap+0xb8/0xf0 [<f84f9000>] ? ipw2100_init+0x0/0x67 [ipw2100] [<c10510c1>] ? sys_init_module+0x161/0x1000 [<c108f847>] ? sys_close+0x67/0xe0 [<c13647c1>] ? syscall_call+0x7/0xb This patch moves pm_qos_add_request prior to pci_register_driver in ipw2100 in order to avoid this problem. Reported-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-09iwlagn: fix rts cts protectionJohannes Berg
Currently the driver will try to protect all frames, which leads to a lot of odd things like sending an RTS with a zeroed RA before multicast frames, which is clearly bogus. In order to fix all of this, we need to take a step back and see what we need to achieve: * we need RTS/CTS protection if requested by the AP for the BSS, mac80211 tells us this * in that case, CTS-to-self should only be enabled when mac80211 tells us * additionally, as a hardware workaround, on some devices we have to protect aggregated frames with RTS To achieve the first two items, set up the RXON accordingly and set the protection required flag in the transmit command when mac80211 requests protection for the frame. To achieve the last item, set the rate-control RTS-requested flag for all stations that we have aggregation sessions with, and set the protection required flag when sending aggregated frames (on those devices where this is required). Since otherwise bugs can occur, do not allow the user to override the RTS-for-aggregation setting from sysfs any more. Finally, also clean up the way all these flags get set in the driver and move everything into the device-specific functions. Cc: stable@kernel.org [2.6.35] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-09libertas: fix build break by including linux/sched.hJohn W. Linville
CC [M] drivers/net/wireless/libertas/cfg.o /home/greearb/git/wireless-testing/drivers/net/wireless/libertas/cfg.c: In function ‘lbs_scan_worker’: /home/greearb/git/wireless-testing/drivers/net/wireless/libertas/cfg.c:722: error: ‘TASK_NORMAL’ undeclared (first use in this function) /home/greearb/git/wireless-testing/drivers/net/wireless/libertas/cfg.c:722: error: (Each undeclared identifier is reported only once /home/greearb/git/wireless-testing/drivers/net/wireless/libertas/cfg.c:722: error: for each function it appears in.) /home/greearb/git/wireless-testing/drivers/net/wireless/libertas/cfg.c: In function ‘lbs_cfg_connect’: /home/greearb/git/wireless-testing/drivers/net/wireless/libertas/cfg.c:1267: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function) /home/greearb/git/wireless-testing/drivers/net/wireless/libertas/cfg.c:1267: error: implicit declaration of function ‘signal_pending’ /home/greearb/git/wireless-testing/drivers/net/wireless/libertas/cfg.c:1267: error: implicit declaration of function ‘schedule_timeout’ Reported-by: Ben Greear <greearb@candelatech.com> Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-09Revert "p54pci: Add PCI ID for SMC2802W"John W. Linville
This reverts commit 5f7aebd845a9d2ed42f36b7333579ec3534b4713. Apparently, that PCI ID data was incorrectly taken from the subsystem information. The actual ID matches another already known ID. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-08e100/e1000*/igb*/ixgb*: Add missing read memory barrierJeff Kirsher
Based on patches from Sonny Rao and Milton Miller... Combined the patches to fix up clean_tx_irq and clean_rx_irq. The PowerPC architecture does not require loads to independent bytes to be ordered without adding an explicit barrier. In ixgbe_clean_rx_irq we load the status bit then load the packet data. With packet split disabled if these loads go out of order we get a stale packet, but we will notice the bad sequence numbers and drop it. The problem occurs with packet split enabled where the TCP/IP header and data are in different descriptors. If the reads go out of order we may have data that doesn't match the TCP/IP header. Since we use hardware checksumming this bad data is never verified and it makes it all the way to the application. This bug was found during stress testing and adding this barrier has been shown to fix it. The bug can manifest as a data integrity issue (bad payload data) or as a BUG in skb_pull(). This was a nasty bug to hunt down, if people agree with the fix I think it's a candidate for stable. Previously Submitted to e1000-devel only for ixgbe http://marc.info/?l=e1000-devel&m=126593062701537&w=3 We've now seen this problem hit with other device drivers (e1000e mostly) So I'm resubmitting with fixes for other Intel Device Drivers with similar issues. CC: Milton Miller <miltonm@bga.com> CC: Anton Blanchard <anton@samba.org> CC: Sonny Rao <sonnyrao@us.ibm.com> CC: stable <stable@kernel.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-08ixgbe: fix build error with FCOE_CONFIG without DCB_CONFIGJohn Fastabend
Building ixgbe without DCB_CONFIG and FCOE_CONFIG will cause a build error. This resolves the build error by wrapping the fcoe.up in CONFIG_IXGBE_DCB ifdefs. Also frames were being priority VLAN tagged even without DCB enabled. This fixes this so that 8021Q priority tags are only added with DCB actually enabled. Reported-by: divya <dipraksh@linux.vnet.ibm.com> Reported-by: Jon Mason <jon.mason@exar.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-07netxen: protect tx timeout recovery by rtnl lockAmit Kumar Salecha
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-07isdn: gigaset: use after freeDan Carpenter
I moved the kfree(cb) below the dereferences. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-07isdn: gigaset: add missing unlockDan Carpenter
We should unlock here. This is the only place where we return from the function with the lock held. The caller isn't expecting it. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-07solos-pci: Fix race condition in tasklet RX handlingDavid Woodhouse
We were seeing faults in the solos-pci receive tasklet when packets arrived for a VCC which was currently being closed: [18842.727906] EIP: [<e082f490>] br2684_push+0x19/0x234 [br2684] SS:ESP 0068:dfb89d14 [18845.090712] [<c13ecff3>] ? do_page_fault+0x0/0x2e1 [18845.120042] [<e082f490>] ? br2684_push+0x19/0x234 [br2684] [18845.153530] [<e084fa13>] solos_bh+0x28b/0x7c8 [solos_pci] [18845.186488] [<e084f711>] ? solos_irq+0x2d/0x51 [solos_pci] [18845.219960] [<c100387b>] ? handle_irq+0x3b/0x48 [18845.247732] [<c10265cb>] ? irq_exit+0x34/0x57 [18845.274437] [<c1025720>] tasklet_action+0x42/0x69 [18845.303247] [<c102643f>] __do_softirq+0x8e/0x129 [18845.331540] [<c10264ff>] do_softirq+0x25/0x2a [18845.358274] [<c102664c>] _local_bh_enable_ip+0x5e/0x6a [18845.389677] [<c102666d>] local_bh_enable+0xb/0xe [18845.417944] [<e08490a8>] ppp_unregister_channel+0x32/0xbb [ppp_generic] [18845.458193] [<e08731ad>] pppox_unbind_sock+0x18/0x1f [pppox] This patch uses an RCU-inspired approach to fix it. In the RX tasklet's find_vcc() function we first refuse to use a VCC which already has the ATM_VF_READY bit cleared. And in the VCC close function, we synchronise with the tasklet to ensure that it can't still be using the VCC before we continue and allow the VCC to be destroyed. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Tested-by: Nathan Williams <nathan@traverse.com.au> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-06Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-08-06iwlwifi: fix locking assertionsJohannes Berg
spin_is_locked() can return zero on some (UP?) configurations because locks don't exist, and that causes an endless amount of warnings. Use lockdep_assert_held() instead, which has two advantages: 1) it verifies the current task is holding the lock or mutex 2) it compiles away completely when lockdep is not enabled Cc: stable@kernel.org [2.6.34+, maybe only parts of patch] Reported-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-06iwlwifi: fix TX tracerJohannes Berg
The TX tracing code copies with the wrong length, which will typically copy too little data. Fix this by using the correct length variable. Cc: stable@kernel.org [2.6.32+] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-05isdn: fix information leakDan Carpenter
The main motivation of this patch changing strcpy() to strlcpy(). We strcpy() to copy a 48 byte buffers into a 49 byte buffers. So at best the last byte has leaked information, or maybe there is an overflow? Anyway, this patch closes the information leaks by zeroing the memory and the calls to strlcpy() prevent overflows. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-05usbnet: remove noisy and hardly useful printkChristian Samsel
With turned on hspa modem (Dell 5530 internal card) and activated usb auto suspend, my system gets up 100 "usbnet_resume has delayed data" per minute. I didnt noticed any pathological behaviour, so just drop this message. if any objections, please at least change it to _DEBUG. Signed-off-by: Christian Samsel <christian.samsel@rwth-aachen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-05rtl8180: avoid potential NULL deref in rtl8180_beacon_workJohn W. Linville
ieee80211_beacon_get can return NULL... Signed-off-by: John W. Linville <linville@tuxdriver.com> Cc: stable@kernel.org
2010-08-05libertas: scan before assocation if no BSSID was givenDan Williams
Fix this leftover TODO from the cfg80211 conversion by doing a scan if cfg80211 didn't pass in the BSSID for us. Since the scan code uses so much of the cfg80211_scan_request structure to build up the firmware command, we just fake one when the scan request is triggered internally. But we need to make sure that internal 'fake' cfg82011 scan request does not get back to cfg82011 via cfg80211_scan_done(). Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-05libertas: fix association with some APs by using extended ratesDan Williams
Some APs get pissy if you don't send the firmware the extended rates in the association request's rates TLV. Found this on a Linksys WRT54G v2; it denies association with status code 18 unless you add the extended rates too. The old driver did this, but it got lost in the cfg80211 conversion. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-05libertas: get the right # of scanned BSSesDan Williams
Let's actually check the right field in the command response; and if there aren't any reported BSSes, exit early with success. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-04virtio_net: implements ethtool_ops.get_drvinfoRusty Russell
I often use "ethtool -i" command to check what driver controls the ehternet device. But because current virtio_net driver doesn't support "ethtool -i", it becomes the following: # ethtool -i eth3 Cannot get driver information: Operation not supported This patch simply adds the "ethtool -i" support. The following is the result when using the virtio_net driver with my patch applied to. # ethtool -i eth3 driver: virtio_net version: N/A firmware-version: N/A bus-info: virtio0 Personally, "-i" is one of the most frequently-used option, and most network drivers support "ethtool -i", so I think virtio_net also should do. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (use ARRAY_SIZE) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-04ppp: make channel_ops conststephen hemminger
The PPP channel ops structure should be const. Cleanup the declarations to use standard C99 format. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-04drivers/net/enic: Use %pUB to format a UUIDJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-04davinci_emac: Fix use after free in davinci_emac_removeStefan Weil
free_netdev finally calls kfree which makes the contents of ndev and priv (private data contained in ndev) invalid. So iounmap should be called before free_netdev. Cc: David S. Miller <davem@davemloft.net> Cc: Chaithrika U S <chaithrika@ti.com> Cc: Sriramakrishnan <srk@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-04via-velocity: do not use PCI resources before pci_enable_device()Kulikov Vasiliy
IRQ and resource[] may not have correct values until after PCI hotplug setup occurs at pci_enable_device() time. The semantic match that finds this problem is as follows: // <smpl> @@ identifier x; identifier request ~= "pci_request.*|pci_resource.*"; @@ ( * x->irq | * x->resource | * request(x, ...) ) ... *pci_enable_device(x) // </smpl> Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-04cxgb4vf: do not use PCI resources before pci_enable_device()Kulikov Vasiliy
IRQ and resource[] may not have correct values until after PCI hotplug setup occurs at pci_enable_device() time. The semantic match that finds this problem is as follows: // <smpl> @@ identifier x; identifier request ~= "pci_request.*|pci_resource.*"; @@ ( * x->irq | * x->resource | * request(x, ...) ) ... *pci_enable_device(x) // </smpl> Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-04cxgb3: do not use PCI resources before pci_enable_device()Kulikov Vasiliy
IRQ and resource[] may not have correct values until after PCI hotplug setup occurs at pci_enable_device() time. The semantic match that finds this problem is as follows: // <smpl> @@ identifier x; identifier request ~= "pci_request.*|pci_resource.*"; @@ ( * x->irq | * x->resource | * request(x, ...) ) ... *pci_enable_device(x) // </smpl> Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-04Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits) Documentation: update broken web addresses. fix comment typo "choosed" -> "chosen" hostap:hostap_hw.c Fix typo in comment Fix spelling contorller -> controller in comments Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault fs/Kconfig: Fix typo Userpace -> Userspace Removing dead MACH_U300_BS26 drivers/infiniband: Remove unnecessary casts of private_data fs/ocfs2: Remove unnecessary casts of private_data libfc: use ARRAY_SIZE scsi: bfa: use ARRAY_SIZE drm: i915: use ARRAY_SIZE drm: drm_edid: use ARRAY_SIZE synclink: use ARRAY_SIZE block: cciss: use ARRAY_SIZE comment typo fixes: charater => character fix comment typos concerning "challenge" arm: plat-spear: fix typo in kerneldoc reiserfs: typo comment fix update email address ...
2010-08-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (30 commits) Revert "HID: add support for the Wacom Intuos 4 wireless" HID: fix up Kconfig entry for ACRUX driver HID: add ACRUX game controller force feedback support HID: Force input registration for "VEC footpedal" HID: add HID_QUIRK_HIDINPUT_FORCE HID: hid-input.c: indentation fixes HID: hiddev: use usb_find_interface, get rid of BKL HID: ignore digitizer usage Undefined (0x00) HID: Add support for Conceptronic CLLRCMCE HID: hid-ids.h: Whitespace fixup, align using TABs HID: picolcd: implement refcounting of framebuffer HID: picolcd: do not reallocate memory on depth change HID: picolcd: Add minimal palette required by fbcon on 8bpp HID: magicmouse: Correct parsing of large X and Y motions. HID: magicmouse: report last touch up HID: picolcd: fix deferred_io init/cleanup to fb ordering HID: hid-ids.h: keep vendor ids in alphabetical order HID: add proper support for Elecom BM084 bluetooth mouse HID: magicmouse: enable horizontal scrolling HID: magicmouse: add param for scroll speed ...
2010-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (39 commits) random: Reorder struct entropy_store to remove padding on 64bits padata: update API documentation padata: Remove padata_get_cpumask crypto: pcrypt - Update pcrypt cpumask according to the padata cpumask notifier crypto: pcrypt - Rename pcrypt_instance padata: Pass the padata cpumasks to the cpumask_change_notifier chain padata: Rearrange set_cpumask functions padata: Rename padata_alloc functions crypto: pcrypt - Dont calulate a callback cpu on empty callback cpumask padata: Check for valid cpumasks padata: Allocate cpumask dependend recources in any case padata: Fix cpu index counting crypto: geode_aes - Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used) pcrypt: Added sysfs interface to pcrypt padata: Added sysfs primitives to padata subsystem padata: Make two separate cpumasks padata: update documentation padata: simplify serialization mechanism padata: make padata_do_parallel to return zero on success padata: Handle empty padata cpumasks ...
2010-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (276 commits) [SCSI] zfcp: Trigger logging in the FCP channel on qdio error conditions [SCSI] zfcp: Introduce experimental support for DIF/DIX [SCSI] zfcp: Enable data division support for FCP devices [SCSI] zfcp: Prevent access on uninitialized memory. [SCSI] zfcp: Post events through FC transport class [SCSI] zfcp: Cleanup QDIO attachment and improve processing. [SCSI] zfcp: Cleanup function parameters for sbal value. [SCSI] zfcp: Use correct width for timer_interval field [SCSI] zfcp: Remove SCSI device when removing unit [SCSI] zfcp: Use memdup_user and kstrdup [SCSI] zfcp: Fix retry after failed "open port" erp action [SCSI] zfcp: Fail erp after timeout [SCSI] zfcp: Use forced_reopen in terminate_rport_io callback [SCSI] zfcp: Register SCSI devices after successful fc_remote_port_add [SCSI] zfcp: Do not try "forced close" when port is already closed [SCSI] zfcp: Do not unblock rport from REOPEN_PORT_FORCED [SCSI] sd: add support for runtime PM [SCSI] implement runtime Power Management [SCSI] convert to the new PM framework [SCSI] Unify SAM_ and SAM_STAT_ macros ...
2010-08-04iwlagn: Improve aggregation failure error messagesAndy Lutomirski
82ca9341763107615a15da6e59b9535d49eb91c3 added scary looking but harmless error messages. Make them clearer and make the actual failure message show up with the same severity as the harmless one. Signed-off-by: Andy Lutomirski <luto@mit.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-04rt2x00: do not use PCI resources before pci_enable_device()Kulikov Vasiliy
IRQ and resource[] may not have correct values until after PCI hotplug setup occurs at pci_enable_device() time. The semantic match that finds this problem is as follows: // <smpl> @@ identifier x; identifier request ~= "pci_request.*|pci_resource.*"; @@ ( * x->irq | * x->resource | * request(x, ...) ) ... *pci_enable_device(x) // </smpl> Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-04wireless: ipw2100: check result of kzalloc()Christoph Fritz
If kzalloc() fails return with -ENOMEM from ipw2100_net_init() which is called by register_netdev. CC: Dan Carpenter <error27@gmail.com> Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-04ath9k: fix erased ieee80211_rx_status.mactimeJan Friedrich
ath9k_rx_skb_preprocess nulls rxs and the mactime is never set again - mactime is always 0. This causes problems in IBSS mode. ieee80211_rx_bss_info uses mactime to decide if an IBSS merge is needed. Without this patch the merge is triggered by each beacon received. This can be recognized by the "beacon TSF higher than local TSF - IBSS merge with BSSID" log message accompanying each beacon. This problem was not completely fixed in commit a6d2055b02dde1067075795274672720baadd3ca and is not a stable kernel fix. It is solely intended for wireless-testing. Signed-off-by: Jan Friedrich <jft@dev2day.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-04p54pci: Add PCI ID for SMC2802WLarry Finger
The SMC2802W appears to work with p54pci. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: David Cozatt <olbrannon@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-28 17:16:06 +0000