| Age | Commit message (Collapse) | Author |
|---|
|
The v4l2_of_parse_endpoint() function can fail so check the return value.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The v4l2_of_parse_endpoint function kernel-doc says that the return value
is always 0. But that is not true since the function can fail and a error
negative code is returned on failure. So correct the kernel-doc to match.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Add fallback compatibility string.
This is in keeping with the fallback scheme being adopted wherever
appropriate for drivers for Renesas SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This memory is allocated using kzalloc so there is no need to call
memset(..., 0, ...)
[mchehab@osg.samsung.com: as suggested by Joe Perches,
It's unusual to not see the alloc above the if, removed a
blank line between kzalloc/if and added a blank line after if]
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
ts2020_remove was calling kfree(dev) with possibly still active
schedule_delayed_work(dev->stat_work). A similar bug in si2157 caused
kernel panics in call_timer_fn e.g. after rmmod cx23885.
Signed-off-by: Ernst Martin Witte <emw-linux-kernel@nocabal.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
rtl2830_remove was calling kfree(dev) with possibly still active
schedule_delayed_work(&dev->stat_work). A similar bug in si2157
caused kernel panics in call_timer_fn e.g. after rmmod cx23885.
Signed-off-by: Ernst Martin Witte <emw-linux-kernel@nocabal.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
si2157_remove was calling kfree(dev) with possibly still active
schedule_delayed_work(dev->stat_work). This caused kernel panics in
call_timer_fn e.g. after rmmod cx23885.
Signed-off-by: Ernst Martin Witte <emw-linux-kernel@nocabal.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
af9033_remove was calling kfree(dev) with possibly still active
schedule_delayed_work(&dev->stat_work). A similar bug in si2157
caused kernel panics in call_timer_fn e.g. after rmmod cx23885.
Signed-off-by: Ernst Martin Witte <emw-linux-kernel@nocabal.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
af9013_remove was calling kfree(state) with possibly still active
schedule_delayed_work(&state->statistics_work). A similar bug in
si2157 caused kernel panics in call_timer_fn e.g. after rmmod cx23885.
Signed-off-by: Ernst Martin Witte <emw-linux-kernel@nocabal.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Sometimes i2c transfer fails. That happens especially when large
amount of data is written sequentially eg. firmware download.
Problem arises with both integrated rtl2832 demod and external
mn88472 demod, which is clear indicator it is busy i2c bus issue.
Use i2c core retry logic in order fix the issue by repeating failed
message. Another solution which also works is to add ~100us delay
between i2c messages - but repeating sounds more elegant and does
not cause any extra delay for success cases.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Add a new product id to dvb-usb-dvbsky for new version of TechnoTrend CT2-4650 CI
Signed-off-by: Torbjörn Jansson <torbjorn.jansson@mbox200.swipnet.se>
Reviewed-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
PIP tested with VLC. Diversity tested with the Windows driver.
Signed-off-by: Stefan Pöschel <basic.master@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The Terratec Cinergy S2 USB BOX uses a Montage M88TS2022 tuner
and a M88DS3103 demodulator, same as Technotrend TT-connect S2-4600.
This patch adds the missing USB Product ID to make it work.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
According with:
https://www.silabs.com/Support%20Documents/TechnicalDocs/Si2157-short.pdf
The RF input frequency range of this demod is from 42MHz to 870 MHz.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Extend the locking to protect more critical actions like register accesses
in the interrupt handlers.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Only handle an interrupt if at least one combination of event bit
and related interrupt bit is set.
Previously it was just checked that at least one event bit and
at least one interrupt bit are set.
This fixes issues like the following which was caused by
interrupt sharing:
An interrupt intended for nvt_cir_isr was handled by nvt_cir_wake_isr
first and because status bit CIR_WAKE_IRSTS_IR_PENDING was set
the wake fifo was accidently cleared.
This patch also fixes the bug that nvt_cir_wake_isr returned IRQ_HANDLED
even if it detected that the (shared) interrupt was meant for another
handler.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Most likely a copy & paste error.
The wakeup interrupt supports less triggering events.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Add locking to nvt_enable_wake calls.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Check for the case that no Nuvoton chip is found on either EFM port.
Also move the position of nvt_efm_disable to reduce the time the
EFM ports are locked.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The Camera Adaptation Layer (CAL) is a block which consists of a dual
port CSI2/MIPI camera capture engine.
Port #0 can handle CSI2 camera connected to up to 4 data lanes.
Port #1 can handle CSI2 camera connected to up to 2 data lanes.
The driver implements the required API/ioctls to be V4L2 compliant.
Driver supports the following:
- V4L2 API using DMABUF/MMAP buffer access based on videobuf2 api
- Asynchronous sensor sub device registration
- DT support
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Sometimes when a Bayer pixelformat is selected the rendering of the OSD text
by vivid was all wrong: every other line of the text was shifted by half the width
or more.
It turned out that to render Bayer formats the interleaved boolean is set to true
in the tpg. This mode indicates a semi-biplanar mode where two interleaved planes
are used to render the frame. From outside the tpg it looks like a single plane,
but internally it is two planes.
However, in the tpg_s_bytesperline() function the interleaved bool wasn't checked
and only the bytesperline value for plane 0 was updated. But for the interleaved
mode the same value has to be copied to bytesperline[1] as well.
The effect was that whatever old value was left in bytesperline[1] was used, which
caused all sorts of weird and seemingly unpredictable shifts.
Reported-by: Ove Brynestad <ovebryne@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
In v4l2-compliance utility, test QUERYBUF required correct length
value to go through each planar to check planar's length in
multi-planar buffer type
Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org> # for v3.7 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The rcar_vin driver relies on this.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
i2c_wr() is called from ops and the interrupt service routine, while
state->wr_data is shared and unprotected, and could be overwritten.
This shared buffer is therefore replaced with a local array with fixed
size. The array has the size of one EDID block (128 bytes) + 2 bytes
i2c address, and the EDID is written block by block (up to 8 blocks).
Signed-off-by: Mats Randgaard <matrandg@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Skip validating the standards field in v4l2_valid_dv_timings() if the
V4L2_DV_BT_CAP_CUSTOM capability is set, since that implies that
non-standard timings are allowed.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Dead code found on below code:
si476x_radio_add_new_custom(radio, SI476X_IDX_DIVERSITY_MODE);
if (rval < 0)
goto exit;
si476x_radio_add_new_custom(radio, SI476X_IDX_INTERCHIP_LINK);
if (rval < 0) ====> Dead code !!!
goto exit;
The piece of code miss return value check after calling .si476x_radio_add_new_custom(),
the patch fix it.
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
dma_area needs to be freed when the device is closed.
Based on em23xx-audio.c
Signed-off-by: Jean-Baptiste Theou <jtheou@adeneo-embedded.us>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The module_param() is "default_rds_buf" and the MODULE_PARM_DESC()
should match.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
It "tx_mask" was intended instead of "tx_maxk".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The intent was to return -1 on error and that's what the callers expect
but the current code returns USHRT_MAX instead.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
During the recent vb2_buffer restructuring, the calculation of the
buffer payload reported to userspace was accidentally broken for the
first encoded frame, counting only the length of the headers.
This patch re-adds the length of the actual frame data.
Fixes: 2d7007153f0c ("[media] media: videobuf2: Restructure vb2_buffer")
Reported-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Jan Luebbe <jlu@pengutronix.de>
Cc: <stable@vger.kernel.org> # for v4.4 and up
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This sp887x_config structure is never modified, so declare it as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The or51211_config structure is never modified, so declare it as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This mxl111sf_tuner_config structure is never modified, so declare it as
const.
There are some indentation changes to remain within 80 columns.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This sp8870_config structure is never modified, so declare it as
const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Since kzalloc can be failed,
if not properly handled, NULL dereference could be happened.
Signed-off-by: Insu Yun <wuninsu@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Since kmalloc can be failed in memory pressure,
if not properly handled, NULL dereference can be happend
Signed-off-by: Insu Yun <wuninsu@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Let us return directly if the element "status" of the variable "buf"
indicates "BUFSTAT_READY".
A check repetition can be excluded for the variable "ret" at the end then.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This issue was detected by using the Coccinelle software.
1. Let us return directly if a buffer allocation failed.
2. Delete the jump label "err" then.
3. Drop the explicit initialisation for the variable "ret"
at the beginning.
4. Return zero as a constant at the end.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Return constant integer values without storing them in the local
variable "err" or "rc".
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Don't hide the error code.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Calling vb2_set_plane_payload is enough, there's no need to
set the planes[] bytesused field. Remove it.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Use to_video_device() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
There are many dropped fields with some sources, leading to many
redundant fields without counterparts. When this redundant field
is odd, a new frame is pushed containing this odd field interleaved
with whatever was left in the buffer, causing video artifacts.
Do not push a new frame after processing every odd field, but do it
only after those which come after an even field.
Signed-off-by: Nikola Forró <nikola.forro@gmail.com>
Acked-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Since saa7134 is now using vb2, there is no reason why we can't support
dmabuf for this driver.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The go7007_hpi_ops structures are never modified, so declare them as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Prevent unnecessary kernel log spamming.
Signed-off-by: Mats Randgaard <matrandg@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Add dma_buf_put() to decrease refcount of the dmabuf in error path if DMABUF size is smaller than the requirement.
Signed-off-by: wu xia <xia.wu@intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The as102_priv_ops_t structure is never modified, so declare it as
const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The stv6110x_devctl structure is never modified, so declare it as
const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
