summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-08-14cxgb4: Add control net_device for configuring PCIe VFHariprasad Shenai
Issue: For instance, the current APIs assume a 1-to-1 mapping of Network Ports, Physical Functions and the SR-IOV Virtual Functions of those Physical Functions. This is not the case with our cards where any Virtual Function can be hooked up to any Port -- or any number of Ports the current Linux APIs also assume only 1 Network Interface/Port can be accessed per Virtual Function. Another issue is that these APIs assume that the Administrative Driver is attached to the Physical Function Associated with a Virtual Function. This is not the case with our card where all administration is performed by a Driver which is not attached to any of the Physical Functions which have SR-IOV PCI Capabilities. Another consequence of these assumptions is the inability to utilize all of the cards SR-IOV resources. For instance, our cards have SR-IOV Capabilities on Physical Functions 0..3 and the administrative Driver attaches to Physical Function 4. Each of the Physical Functions 0..3 can support up to 16 Virtual Functions. With the current Linux APIs, a 2-Port card would only be able to use the Virtual Functions on Physical Function 0..1 and not allow the Virtual Functions on Physical Functions 2..3 to be used since there are no Ports 2..3 on a 2-Port card. Fix: Since the control node is always the netdevice for all VF ACL commands. Created a dummy netdevice for each Physical Function from 0 to 3 through which one could control their VFs. The device won't be associated with any port, since it doesn't need to transmit/receive. Its purely used for VF management purpose only. The device will be registered only when VF for a particular PF is configured using PCI sysfs interface and unregistered while pci_disable_sriov() for the PF is called. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: phy: initialize rc to zero to avoid returning garbage valueColin Ian King
In the case where phydev->interrupts is not PHY_INTERRUPT_ENABLED function vsc85xx_ack_interrupt is returning an uninitialized garbage value. Fix this by initializing rc to zero. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: bfin_mac: Fix a few spelling fixesLABBE Corentin
This patch respell some word badly spelled. - Invidate instead of Invalidate - proble instead of probe Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: wireless: realtek: rtlwifi: usb: don't print error when allocating urb ↵Wolfram Sang
fails kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: wireless: marvell: mwifiex: usb: don't print error when allocating urb ↵Wolfram Sang
fails kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: wireless: marvell: libertas_tf: if_usb: don't print error when ↵Wolfram Sang
allocating urb fails kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: wireless: intersil: orinoco: orinoco_usb: don't print error when ↵Wolfram Sang
allocating urb fails kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: wireless: broadcom: brcm80211: brcmfmac: usb: don't print error when ↵Wolfram Sang
allocating urb fails kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: wireless: ath: ar5523: ar5523: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: wimax: i2400m: usb-notif: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: usb: usbnet: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: usb: lan78xx: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Acked-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: usb: hso: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: can: usb: usb_8dev: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: can: usb: peak_usb: pcan_usb_core: don't print error when allocating ↵Wolfram Sang
urb fails kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: can: usb: kvaser_usb: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: can: usb: gs_usb: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: can: usb: esd_usb2: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: can: usb: ems_usb: don't print error when allocating urb failsWolfram Sang
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: fix up a few missing hashtable.h conflict resolutionsJiri Kosina
There are a couple of leftover symbol conflicts caused by hashtable.h being included by netdevice.h; those were not caught as build failure (they're "only" a warning, but in fact real bugs). Fix those up. Fixes: e87a8f24c ("net: resolve symbol conflicts with generic hashtable.h") Reported-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Don't set RX_PACKET_DIS while initializingSunil Goutham
Setting BGXX_SPUX_MISC_CONTROL::RX_PACKET_DIS is not needed as packet reception is anyway disabled by BGXX_CMRX_CONFIG::DATA_PKT_RX_EN. Also setting RX_PACKET_DIS causes a bogus remote fault condition which delays link detection. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Use netdev_rss_key_fill() helperSunil Goutham
Use standard API to generate a random RSS hash key on every boot. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Configure tunnelling protocol parsingZyta Szpak
This patch enables parsing of inner layers for tunnelled packets. Signed-off-by: Zyta Szpak <zr@semihalf.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Use napi_consume_skb for bulk freeSunil Goutham
This patch enables bulk freeing on the Tx side. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Don't set mac address for secondary Qset VFsSunil Goutham
Set MAC addresses only for primary VF's and don't for secondary VFs. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Reset RXQ HW stats when interface is brought downJerin Jacob
When SQ/TXQ is reclaimed i.e reset it's stats also automatically reset by HW. This is not the case with RQ. Also VF doesn't have write access to statistics counter registers. Hence a new Mbox msg is introduced which supports resetting RQ, SQ and full Qset stats. Currently only RQ stats are being reset using this mbox message. Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Improvement for MBX interface debug messagesRadoslaw Biernacki
Adding debug messages in case of NACK for a mailbox message, also did small cleanups. Signed-off-by: Radoslaw Biernacki <rad@semihalf.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Use skb_add_rx_frag() for split buffer Rx pktsSunil Goutham
Instead of a round about way of converting buffers to SKBs and combining them into a frag list, use standard skb_add_rx_frag() API to merge page fragments. This code is useful when incoming packets are of size more than RCV_FRAG_LEN which is currently set to 2048bytes. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Use netdev's name for naming VF's interruptsSunil Goutham
This patch changes the way VF's irqs are visible in /proc/interrupts. Instead of VF id, logical interface's netdev name is used for IRQ naming and also all secondary VF's interrupts in multiqset config use primary VF's netdev name. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Support for 83xx mixed QLM/DLM configSunil Goutham
83xx has 4 BGX blocks and are enabled mixed QLM/DLM configs. BGX0/BGX1 are from QLM2/QLM3, BGX3 is DLM4 and BGX2 is split across DLM5 & DLM6. This patch adds support for BGX2's split config and also enables all 4 BGXs to be used. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Add support for 16 LMACs of 83xxSunil Goutham
83xx will have 4 BGX blocks i.e 16 LMACs, to avoid changing the same with every platform, nicpf struct elements which track LMAC related info are now allocated runtime based on platform's max possible BGX count. Also fixed configuring min packet size for all LMAC's supported on a platform. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Add RGMII interface type supportSunil Goutham
This patch adds RGX/RGMII interface type support to BGX driver. This type of interface is supported by 81xx SOC. CN81XX VNIC has 8 VFs and max possible LMAC interfaces are 9, hence RGMII interface will not work if all DLMs are in BGX mode and all 8 LMACs are enabled Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Add QSGMII interface type supportSunil Goutham
This patch adds support for QSGMII interface type to the BGX driver. This type of interface is supported by 81xx SOC. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Add 81xx support to BGX driverSunil Goutham
This patch adds support for BGX module on 81xx where a BGX can be split and have different LMACs configured in different modes. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Support for different LMAC types within BGXSunil Goutham
On 88xx all LMACs in a BGX will be in same mode but on 81xx BGX can be split as two and there can be LMACs configured in different modes. These changes move lmac_type, lane2serdes fields into per lmac struct from BGX struct. Got rid of qlm_mode field which has become redundant with these changes. And now no of valid LMACs is read from CSRs configured by low level firmware and figuring out the same based on QLM mode is discarded Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Enable mailbox interrupts on 81xx/83xxSunil Goutham
88xx has 128 VFs, 81xx has 8 VFs and 83xx will have 32VFs. Made changes to PF driver such that mailbox interrupt enable registers are configuired based on number of VFs HW supports. Also cleanedup mailbox irq handler registration code. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Enable CQE_RX desc's extension fieldsSunil Goutham
Unlike 88xx, CQE_RX descriptor's tunnelling extension i.e CQE_RX2_S is always enabled on 81xx/83xx and HW does insert these fields into CQE_RX. As a result receive buffer addresses will now be present at 7th word of CQE_RX instead of 6th. Enable CQE_RX2_S on 88xx pass 2.x as well. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Set queue count based on number of CPUsSunil Goutham
81xx has only 4 CPUs, so it doesn't make sense to initialize entire Qset i.e 8 queues by default. Made changes to queue initialization to init queues equal to number of CPUs or 8 queues whichever is lesser. Also this will be applicable to VMs with VNIC VF attached and having less VCPUs Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Add support for 81xx and 83xx chipsSunil Goutham
This patch adds info on HW maximums of 81xx/83xx and also configures receive and transmit datapaths accordingly. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Add VNIC's PCI devid on future chipsSunil Goutham
This patch adds PCI device IDs of VNIC on newer chips and also registers VF driver with them. Device id remains same for all versions of chips but subsystem device id changes. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Moved HW capability info from macros to structureSunil Goutham
Current driver has most of the HW maximums info like no of channels, traffic limiters, RSS indices e.t.c in the form of macros. These have been moved into a 'hw_info' structure so that support for VNIC on newer chips with different set of HW maximums can be added. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13drivers: net: xgene: Fix backward compatibilityIyappan Subramanian
This patch fixes the backward compatibility on handling phy_connect(), by iterating over the phy-handle, when new DT is used with older kernel. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13drivers: net: xgene: Poll link status via GPIOIyappan Subramanian
When 10GbE SFP+ module is not plugged in or cable is not connected, the link status register does not report the proper state due to floating signal. This patch checks the module present status via an GPIO to determine whether to ignore the link status register and report link down. Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Fushen Chen <fchen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13drivers: net: xgene: XFI PCS reset when link is downIyappan Subramanian
This patch fixes the link recovery issue, by doing PCS reset when the link is down. Signed-off-by: Fushen Chen <fchen@apm.com> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13drivers: net: xgene: Change port init sequenceIyappan Subramanian
This patch rearranges the port initialization sequence as recommended by hardware specification. This patch also removes, mac_init() call from xgene_enet_link_state(), as it was not required. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Fushen Chen <fchen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13drivers: net: xgene: Fix RSS indirection table fieldsIyappan Subramanian
This patch fixes FPSel and NxtFPSel fields length to 5-bit value. Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Fushen Chen <fchen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13drivers: net: xgene: Fix error deconstruction pathIyappan Subramanian
Since register_netdev() call in xgene_enet_probe() was moved down to the end, it doesn't properly handle errors that may occur, by deconstructing everything that was setup before the error occurred. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13drivers: net: xgene: fix: Delete descriptor rings and buffer poolsIyappan Subramanian
xgene_enet_init_hw() should delete any descriptor rings and buffer pools setup should le_ops->cle_init() return an error. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13drivers: net: xgene: fix: Add dma_unmap_singleIyappan Subramanian
In addition to xgene_enet_delete_bufpool() freeing skbs, their associated dma memory should also be unmapped. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13drivers: net: xgene: Fix compiler warningsIyappan Subramanian
Fixed compiler warnings reported with -Wmaybe-uninitialized W=1, /drivers/net/ethernet/apm/xgene/xgene_enet_main.c: In function ‘xgene_enet_rx_frame’: ../drivers/net/ethernet/apm/xgene/xgene_enet_main.c:455:27: warning: variable ‘pdata’ set but not used [-Wunused-but-set-variable] struct xgene_enet_pdata *pdata; ^ ../drivers/net/ethernet/apm/xgene/xgene_enet_main.c: In function ‘xgene_enet_remove’: ../drivers/net/ethernet/apm/xgene/xgene_enet_main.c:1691:30: warning: variable ‘mac_ops’ set but not used [-Wunused-but-set-variable] const struct xgene_mac_ops *mac_ops; ^ Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 16:17:04 +0000