summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2015-01-24net: stmmac: dwmac-rk: Don't set the regulator voltage for phy from the driverRomain Perier
As these settings can be directly expressed from devicetree for both fixed regulators and pmic-integrated regulators, it is more standard to set them from dts and let the regulator framework use the right voltage informations when it is used in the driver. Signed-off-by: Romain Perier <romain.perier@gmail.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24cxgb4: Add debugfs options to dump the rss key, config for PF, VF, etcHariprasad Shenai
Adds support to dump the rss table, rss_config, rss_key, rss_pf_config and rss_vf_config Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24cxgb4: Add debugfs entry to dump the contents of the flashHariprasad Shenai
Adds support to dump the contents of the flash in the adapter Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi pULL SCSI fixes from James Bottomley: "This consists of four real fixes and three MAINTAINER updates. Three of the fixes are obvious (the DIX and atomic allocation are bug on and warn on fixes and the other is just trivial) and the ipr one is a bit more involved but is required because without it, the card double completes aborted commands and causes a kernel oops" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: MAINTAINERS: ibmvscsi driver maintainer change MAINTAINERS: ibmvfc driver maintainer change MAINTAINERS: Remove self as isci maintainer scsi_debug: test always evaluates to false, || should be used instead scsi: Avoid crashing if device uses DIX but adapter does not support it scsi_debug: use atomic allocation in resp_rsup_opcodes ipr: wait for aborted command responses
2015-01-24Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog fixes from Wim Van Sebroeck: "This will fix reboot issues with the imx2_wdt driver and it also drops some forgotten owner assignments from platform_drivers" * git://www.linux-watchdog.org/linux-watchdog: watchdog: drop owner assignment from platform_drivers watchdog: imx2_wdt: Disable power down counter on boot watchdog: imx2_wdt: Improve power management support.
2015-01-24Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull hwmon update from Jean Delvare: "This contains a single thing: a new driver for the temperature sensor embedded in the Intel 5500/5520/X58 chipsets. Sorry for the late request, it's been so long since I last sent a pull request and I've been so busy with other tasks meanwhile that I simply forgot about these patches. But given that this is a new driver, it can't introduce any regression so I thought it could still be OK. This has been in linux-next for months now" * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (i5500_temp) Convert to use ATTRIBUTE_GROUPS macro hwmon: (i5500_temp) Convert to module_pci_driver hwmon: (i5500_temp) Don't bind to disabled sensors hwmon: (i5500_temp) Convert to devm_hwmon_device_register_with_groups hwmon: (i5500_temp) New driver for the Intel 5500/5520/X58 chipsets
2015-01-24Merge tag 'media/v3.19-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - fix some race conditions caused by a regression on videobuf2 - fix a interrupt release bug on cx23885 - fix support for Mygica T230 and HVR4400 - fix compilation breakage when USB is not selected on tlg2300 - fix capabilities report on ompa3isp, soc-camera, rcar_vin and pvrusb2 * tag 'media/v3.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] omap3isp: Correctly set QUERYCAP capabilities [media] cx23885: fix free interrupt bug [media] pvrusb2: fix missing device_caps in querycap [media] vb2: fix vb2_thread_stop race conditions [media] rcar_vin: Update device_caps and capabilities in querycap [media] soc-camera: fix device capabilities in multiple camera host drivers [media] Fix Mygica T230 support [media] cx23885: Split Hauppauge WinTV Starburst from HVR4400 card entry [media] tlg2300: Fix media dependencies
2015-01-24dm: fix handling of multiple internal suspendsMikulas Patocka
Commit ffcc393641 ("dm: enhance internal suspend and resume interface") attempted to handle multiple internal suspends on the same device, but it did that incorrectly. When these functions are called in this order on the same device the device is no longer suspended, but it should be: dm_internal_suspend_noflush dm_internal_suspend_noflush dm_internal_resume Fix this bug by maintaining an 'internal_suspend_count' and resuming the device when this count drops to zero. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-01-24hwmon: (i5500_temp) Convert to use ATTRIBUTE_GROUPS macroAxel Lin
Use ATTRIBUTE_GROUPS macro to simplify the code a bit. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2015-01-24hwmon: (i5500_temp) Convert to module_pci_driverAxel Lin
Use module_pci_driver to simplify the code a bit. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2015-01-24hwmon: (i5500_temp) Don't bind to disabled sensorsJean Delvare
On many motherboards, for an unknown reason, the thermal sensor seems to be disabled and will return a constant temperature value of 36.5 degrees Celsius. Don't bind to the device in that case, so that we don't report this bogus value to userspace. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Romain Dolbeau <romain@dolbeau.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2015-01-24hwmon: (i5500_temp) Convert to devm_hwmon_device_register_with_groupsJean Delvare
Use devm_hwmon_device_register_with_groups() to simplify the code a bit. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Romain Dolbeau <romain@dolbeau.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2015-01-24hwmon: (i5500_temp) New driver for the Intel 5500/5520/X58 chipsetsJean Delvare
The Intel 5500, 5520 and X58 chipsets embed a digital thermal sensor. This new driver supports it. Note that on many boards the sensor seems to be disabled and reports the minimum value (36.5 degrees Celsius) all the time. Signed-off-by: Jean Delvare <jdelvare@suse.de> Tested-by: Romain Dolbeau <romain@dolbeau.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2015-01-23amd-xgbe: Use proper Rx flow control registerLendacky, Thomas
Updated hardware documention shows the Rx flow control settings were moved from the Rx queue operation mode register to a new Rx queue flow control register. The old flow control settings are now reserved areas of the Rx queue operation mode register. Update the code to use the new register. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-23xen-netback: always fully coalesce guest Rx packetsDavid Vrabel
Always fully coalesce guest Rx packets into the minimum number of ring slots. Reducing the number of slots per packet has significant performance benefits when receiving off-host traffic. Results from XenServer's performance benchmarks: Baseline Full coalesce Interhost VM receive 7.2 Gb/s 11 Gb/s Interhost aggregate 24 Gb/s 24 Gb/s Intrahost single stream 14 Gb/s 14 Gb/s Intrahost aggregate 34 Gb/s 34 Gb/s However, this can increase the number of grant ops per packet which decreases performance of backend (dom0) to VM traffic (by ~10%) /unless/ grant copy has been optimized for adjacent ops with the same source or destination (see "grant-table: defer releasing pages acquired in a grant copy"[1] expected in Xen 4.6). [1] http://lists.xen.org/archives/html/xen-devel/2015-01/msg01118.html Signed-off-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-23vxlan: advertise netns of vxlan dev in fdb msgNicolas Dichtel
Netlink FDB messages are sent in the link netns. The header of these messages contains the ifindex (ndm_ifindex) of the netdevice, but this ifindex is unusable in case of x-netns vxlan. I named the new attribute NDA_NDM_IFINDEX_NETNSID, to avoid confusion with NDA_IFINDEX. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-23veth: advertise link netns via netlinkNicolas Dichtel
Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-23macvlan: advertise link netns via netlinkNicolas Dichtel
Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24Merge tag 'platform-drivers-x86-v3.19-2' of ↵Linus Torvalds
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull platform driver fix from Darren Hart: "Revert keyboard backlight sysfs support and documentation. The support for the dell-laptop keyboard backlight was flawed and the fix: https://lkml.org/lkml/2015/1/14/539 was more invasive that I felt comfortable sending at RC5. This series reverts the support for the dell-laptop keyboard backlight as well as the documentation for the newly created sysfs attributes. We'll get this implemented correctly for 3.20" * tag 'platform-drivers-x86-v3.19-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: Revert "platform: x86: dell-laptop: Add support for keyboard backlight" Revert "Documentation: Add entry for dell-laptop sysfs interface"
2015-01-24Merge tag 'pci-v3.19-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "These are fixes for: - a resource management problem that causes a Radeon "Fatal error during GPU init" on machines where the BIOS programmed an invalid Root Port window. This was a regression in v3.16. - an Atheros AR93xx device that doesn't handle PCI bus resets correctly. This was a regression in v3.14. - an out-of-date email address" * tag 'pci-v3.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Update Richard Zhu's email address sparc/PCI: Clip bridge windows to fit in upstream windows powerpc/PCI: Clip bridge windows to fit in upstream windows parisc/PCI: Clip bridge windows to fit in upstream windows mn10300/PCI: Clip bridge windows to fit in upstream windows microblaze/PCI: Clip bridge windows to fit in upstream windows ia64/PCI: Clip bridge windows to fit in upstream windows frv/PCI: Clip bridge windows to fit in upstream windows alpha/PCI: Clip bridge windows to fit in upstream windows x86/PCI: Clip bridge windows to fit in upstream windows PCI: Add pci_claim_bridge_resource() to clip window if necessary PCI: Add pci_bus_clip_resource() to clip to fit upstream window PCI: Pass bridge device, not bus, when updating bridge windows PCI: Mark Atheros AR93xx to avoid bus reset PCI: Add flag for devices where we can't use bus reset
2015-01-24Merge tag 'devicetree-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux Pull devicetree bug fixes and documentation updates from Grant Likely: "A few bugfixes for the new DT overlay feature, documentation updates, spelling corrections, and changes to MAINTAINERS. Nothing earth shattering here" * tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: of/unittest: Overlays with sub-devices tests of/platform: Handle of_populate drivers in notifier of/overlay: Do not generate duplicate nodes devicetree: document the "qemu" and "virtio" vendor prefixes devicetree: document ARM bindings for QEMU's Firmware Config interface Documentation: of: fix typo in graph bindings dma-mapping: fix debug print to display correct dma_pfn_offset of: replace Asahi Kasei Corp vendor prefix ARM: dt: GIC: Spelling s/specific/specifier/, s/flaggs/flags/ dt/bindings: arm-boards: Spelling s/pointong/pointing/ MAINTAINERS: Update DT website and git repository MAINTAINERS: drop DT regex matching on of_get_property and of_match_table
2015-01-23Merge tag 'mvebu-fixes-3.19-4' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson
Merge "mvebu/fixes #3" from Andrew Lunn: mvebu fixes for 3.19. (Part 4) bus: mvebu-mbus: fix support of MBus window 13 * tag 'mvebu-fixes-3.19-4' of git://git.infradead.org/linux-mvebu: bus: mvebu-mbus: fix support of MBus window 13 ARM: mvebu: completely disable hardware I/O coherency Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-23bcma: use standard bus scanning during early registerRafał Miłecki
Starting with kernel 3.19-rc1 early registration of bcma on MIPS is done a bit later, with memory allocator available. This allows us to simplify code by using standard bus scanning method. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23atmel: Remove open-coded and wrong strcasecmpRasmus Villemoes
The kernel's string library does in fact have strcasecmp, at least since ded220bd8f08 ("[STRING]: Move strcasecmp/strncasecmp to lib/string.c"). Moreover, this open-coded version is in fact wrong: If the strings only differ in their last character, a and b have already been incremented to point to the terminating NUL bytes, so they would wrongly be treated as equal. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23p54pci: add handling of signal caseNicholas Mc Guire
if(!wait_for_completion_interruptible_timeout(...)) only handles the timeout case - this patch adds handling the signal case the same as timeout. Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23p54: add handling of the signal caseNicholas Mc Guire
if(!wait_for_completion_interruptible_timeout(...)) only handles the timeout case - this patch adds handling the signal case the same as timeout. Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23ath5k: document a fall-through case in ath5k_hw_set_opmodeJohn Linville
Coverity: CID 114932 Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23ath9k_htc: remove dead code in error path of ath9k_htc_txcompletion_cbJohn Linville
This clause is conditioned on htc_hdr != NULL, but it will only be NULL when that check is reached. Coverity: CID 114318 Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23brcmfmac: Use put_unaligned_le32Vaishali Thakkar
This patch introduces the use of function put_unaligned_le32. This is done using Coccinelle and semantic patch used is as follows: @a@ typedef u32, __le32, uint32_t; {u32,__le32,uint32_t} e32; identifier tmp; expression ptr; expression y,e; type T; type T; @@ - tmp = cpu_to_le32(y); <+... when != tmp ( - memcpy(ptr, (T)&tmp, \(4\|sizeof(u32)\|sizeof(__le32)\|sizeof(uint32_t)\|sizeof(e32)\)); + put_unaligned_le32(y,ptr); | - memcpy(ptr, (T)&tmp, ...); + put_unaligned_le32(y,ptr); ) ...+> ? tmp = e @@ type T; identifier a.tmp; @@ - T tmp; ...when != tmp Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23Revert "platform: x86: dell-laptop: Add support for keyboard backlight"Darren Hart
This reverts commit 02b2aaaa57ab41504e8d03a3b2ceeb9440a2c188. This interface was determined to be flawed and required too invasive a fix for the RC cycle. This will be revisited in 3.20. Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-01-23bcma: clean bus initialization codeRafał Miłecki
This moves main bus init code to the main.c and renames old function to make its purpose clear. Thanks to this change we'll also be able to separate scanning from registration (and support PCIe Gen 2 devices) in the future. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23b43: stop leds during suspendSabrina Dubroca
Call b43_leds_stop during suspend to avoid this WARN: WARNING: CPU: 1 PID: 0 at net/mac80211/util.c:755 ieee80211_can_queue_work.isra.11+0x35/0x50 [mac80211]() queueing ieee80211 work while going to suspend [...] Call Trace: [<c165fb2a>] dump_stack+0x48/0x69 [<c1052f7b>] warn_slowpath_common+0x8b/0xc0 [<f9c30225>] ? ieee80211_can_queue_work.isra.11+0x35/0x50 [mac80211] [<f9c30225>] ? ieee80211_can_queue_work.isra.11+0x35/0x50 [mac80211] [<c1052fe3>] warn_slowpath_fmt+0x33/0x40 [<f9c30225>] ieee80211_can_queue_work.isra.11+0x35/0x50 [mac80211] [<f9c30260>] ieee80211_queue_work+0x20/0x40 [mac80211] [<f9f25d78>] b43_led_brightness_set+0x28/0x30 [b43] [<c14f3835>] led_timer_function+0xd5/0xe0 [<c10cb534>] call_timer_fn+0xa4/0x4a0 Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wlcore: unlock on error in wl1271_op_suspend()Dan Carpenter
We recently introduced a new error path which needs an unlock. Fixes: 6d5a748d4836 ('wlcore: add ability to reduce FW interrupts during suspend') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23rtlwifi/rtl8192de: remove redundant else if checkColin Ian King
The else if check condition checks for the opposite of the if check, hence the else if check is redundant and can be replaced with a simple else: if (rtlpriv->rtlhal.macphymode == SINGLEMAC_SINGLEPHY) { .. } else if (rtlpriv->rtlhal.macphymode != SINGLEMAC_SINGLEPHY) { .. } replaced with: if (rtlpriv->rtlhal.macphymode == SINGLEMAC_SINGLEPHY) { .. } else { .. } Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23ath9k_htc: Add a module parameter to disable blinkHong Xu
Add an option "blink" to enable or disable the LED blink. The default value is set to 1 so that existing users would not experience any unexpected changes. Signed-off-by: Hong Xu <hong@topbug.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: initiate TX BA sessionsBob Copeland
Currently, wcn36xx only asks for a TX BA session if it has already established one for RX. Thus, two wcn36xx devices cannot do a-mpdu between themselves since they both wait for the other to go first. Fix this by starting a BA session after a few QoS data frames have been sent to a STA. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: move set_tx_pdu inside set_tx_data/mgmtBob Copeland
The pdu is part of the buffer descriptor, so it makes sense that one function would fill both. Also, passing the whole skb instead of just the header pointer to the set_tx_data function paves the way for using its fields for ampdu setup inside set_tx_data(). Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: initialize dxe lockBob Copeland
The dxe lock is missing its initialization, so add it. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: initialize skb_lockBob Copeland
ctl->skb_lock is never initialized, a fact caught by lockdep. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: don't process 'valid' descriptorsBob Copeland
The DMA engine will reset the valid bit after a descriptor is complete; any with the valid bit still set may still be in use by the hardware, so check that before freeing the descriptor. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: let device generate qos seq numbersBob Copeland
wcn36xx currently sends an incorrect sequence number into the BA session setup firmware command: it should be saving or updating the ssn in the TX_START ampdu_action callback instead of waiting until TX_OPERATIONAL. However, we can sidestep the issue by letting the hardware generate the sequence numbers for QoS frames, as is done in prima, so do that. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: use !! when assigning int as a booleanBob Copeland
bd->tx_comp is a single bit in a bitfield, so assigning "info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS" only happens to work because TX_STATUS is defined to BIT(0); if it were any other bit this assignment would fail. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: initialize device defaults on startBob Copeland
Set up default configuration for the device when we call start. The defaults come from dumps from the prima driver for the same hardware. This fixes transmit A-MPDU; previously only one MPDU would be sent per A-MPDU due to missing MAX_MPDUS_IN_AMPDU setting. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wlcore: fix copy-paste bug: assign from src struct not destGiel van Schijndel
Signed-off-by: Giel van Schijndel <me@mortis.eu> Reported-at: http://www.viva64.com/en/b/0299/ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23mwifiex: do not emit messages while holding spinlockAvinash Patil
Avoid printing dev_{warn/dbg} messages while holding spinlock. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23mwifiex: check driver status in connect and scan handlersAmitkumar Karwar
Ignore scan and connection requests from cfg80211 when driver unload is in process or previous command has timed out due to a firmware bug. This patch fixes corner case system crash issues. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23ath9k: Fix no-ack frame statusSujith Manoharan
Check if the frame has been completed without any error and use IEEE80211_TX_STAT_NOACK_TRANSMITTED to indicate successful transmission of no-ack frames. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23dm cache: fix problematic dual use of a single migration count variableJoe Thornber
Introduce a new variable to count the number of allocated migration structures. The existing variable cache->nr_migrations became overloaded. It was used to: i) track of the number of migrations in flight for the purposes of quiescing during suspend. ii) to estimate the amount of background IO occuring. Recent discard changes meant that REQ_DISCARD bios are processed with a migration. Discards are not background IO so nr_migrations was not incremented. However this could cause quiescing to complete early. (i) is now handled with a new variable cache->nr_allocated_migrations. cache->nr_migrations has been renamed cache->nr_io_migrations. cleanup_migration() is now called free_io_migration(), since it decrements that variable. Also, remove the unused cache->next_migration variable that got replaced with with prealloc_structs a while ago. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
2015-01-23dm cache: share cache-metadata object across inactive and active DM tablesJoe Thornber
If a DM table is reloaded with an inactive table when the device is not suspended (normal procedure for LVM2), then there will be two dm-bufio objects that can diverge. This can lead to a situation where the inactive table uses bufio to read metadata at the same time the active table writes metadata -- resulting in the inactive table having stale metadata buffers once it is promoted to the active table slot. Fix this by using reference counting and a global list of cache metadata objects to ensure there is only one metadata object per metadata device. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
2015-01-23Merge tag 'iwlwifi-next-for-kalle-2015-01-22' of ↵Kalle Valo
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next * more work for new devices (4165 / 8260) * cleanups / improvemnts in rate control * fixes for TDLS * major statistics work from Johannes - more to come * improvements for the fw error dump infrastructure * usual amount of small fixes here and there (scan, D0i3 etc...)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 02:54:00 +0000