summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-02-01iwlwifi: move register access lock into transportLilach Edelstein
Move the reg_lock that protects HW register access into the transport implementation. Locking is no longer exposed, but handled internally in grab and release NIC access. This simplifies the users. Signed-off-by: Lilach Edelstein <lilach.edelstein@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-01iwlwifi: add iwl_set_bits_mask to transport APILilach Edelstein
Express iwl_set_bit() and iwl_clear_bit() through iwl_set_bits_mask() and add the latter to the transport's API in order to allow different implementation for different transport types in the future. Signed-off-by: Lilach Edelstein <lilach.edelstein@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-01iwlwifi: lower BT coex aggregation message severityJohannes Berg
As the rate scaling algorithm will attempt to enable aggregation over and over again, the message will flood the log if there is, for example, Bluetooth streaming music. Make it a debug messages instead of printing it all the time. Reported-by: Jan-Michael Brummer <jan.brummer@tabos.org> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-01iwlwifi: add the MVM driverJohannes Berg
Newer firmware revisions have a completely new firmware API. This is the new driver for this new API. I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Cc: Alexander Bondar <alexander.bondar@intel.com> Cc: Amit Beka <amit.beka@intel.com> Cc: Amnon Paz <amnonx.paz@intel.com> Cc: Assaf Krauss <assaf.krauss@intel.com> Cc: David Spinadel <david.spinadel@intel.com> Cc: Dor Shaish <dor.shaish@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Eytan Lifshitz <eytan.lifshitz@intel.com> Cc: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-31mac80211: inform the driver about update of dtim_periodEmmanuel Grumbach
Currently, when the driver requires the DTIM period, mac80211 will wait to hear a beacon before association. This behavior is suboptimal since some drivers may be able to deal with knowing the DTIM period after the association, if they get it at all. To address this, notify the drivers with bss_info_changed with the new BSS_CHANGED_DTIM_PERIOD flag when the DTIM becomes known. This might be when changing to associated, or later when the entire association was done with only probe response information. Rename the hardware flag for the current behaviour to IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC to more accurately reflect its behaviour. IEEE80211_HW_NEED_DTIM_PERIOD is no longer accurate as all drivers get the DTIM period now, just not before association. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-30iwlwifi: add NVM and PHY DB code for new MVM driverJohannes Berg
The new MVM (multi-virtual MAC) firmware driver requires NVM (non-volatile memory) parsing code and some PHY information database code. Add this separately. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-30iwlwifi: fix calibration parserJohannes Berg
The firmware TLV for calibration data isn't really a u64, but two u32 values. Define a struct for that and change the parser. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-30iwlwifi: clean up CMD_MODE enumJohannes Berg
Just format the enum better. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-30iwlwifi: add 7000 series device configurationJohannes Berg
Add configuration and detection code for the new 7000 series, with 7260 and 3160 devices. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-30Merge remote-tracking branch 'wireless-next/master' into iwlwifi-nextJohannes Berg
2013-01-30wil6210: fix wil_vring_init_tx statusVladimir Kondratiev
In case vring setup with the firmware failed, success status was returned. fix it. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30wil6210: Never delete Rx chain with firmwareVladimir Kondratiev
Firmware crash on attempt to delete Rx chain. Driver part of Rx chain removed only in preparation for the target reset; as reset is the only flow that removes Rx chain in the firmware. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30wil6210: checkpatch warningsVladimir Kondratiev
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30wil6210: fix checkpatch CamelCase warningsVladimir Kondratiev
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30wil6210: Reorder reset preparation sequenceVladimir Kondratiev
Disable interrupts first to prevent spurious WMI events arrival Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30wil6210: Separate common code for mbox regs caching to functionVladimir Kondratiev
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30wil6210: Fix "don't scan after connect" logicVladimir Kondratiev
When connect times out, scan was not re-enabled. Strictly say, it is firmware issue - it should issue "disconnect" event but it does not. Compensate in the driver. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30wil6210: Call skb_orphan() right before Rx indicationVladimir Kondratiev
Other parts of Rx path (BACK logic) will need to access associated data Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30wil6210: Fix: Tx stallVladimir Kondratiev
Due to multi-tx-queue design, wil_start_xmit() used to be executed concurrently for different queues. Then, these transmits delivered to the same queue, creating race. As result, Tx descriptor may be skipped, causing stall in hardware. Convert to single Tx queue fixes it. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30wil6210: Count Tx statistics on Tx completionVladimir Kondratiev
This allows to account for Tx errors Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30wil6210: Refactor rx init/finiVladimir Kondratiev
Move WMI related operations to wmi.c as helper functions Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30wil6210: remove raw wil_dbg() callsVladimir Kondratiev
Introduce debug category "MISC", convert all raw wil_dbg() to this category. This improves dynamic debug manageability Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30wil6210: rearrange IRQ debug printingVladimir Kondratiev
Make printings from IRQ appears in dmesg in chronological order Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30wil6210: Detect FW errorVladimir Kondratiev
In the firmware, added is ability to report internal errors using IRQ. Catch this IRQ and notify user space via netlink User space get notified like (udevadm monitor --kernel --property): KERNEL[12660.320520] change /devices/pci0000:00/0000:00:1c.1/0000:02:00.0/0000:03:01.0/0000:05:00.0/net/wlan12 (net) ACTION=change DEVPATH=/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/0000:03:01.0/0000:05:00.0/net/wlan12 DEVTYPE=wlan EVENT=FW_ERROR IFINDEX=6 INTERFACE=wlan12 SEQNUM=2489 SOURCE=wil6210 SUBSYSTEM=net Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwifiex: avoid out of bounds access in mwifiex_get_common_rates.Cyril Roelandt
Check that the array indexes are in-bounds before accessing the rate2 and tmp arrays. Found with the following semantic patch: <smpl> @@ identifier t; identifier idx; expression E; statement S; @@ * for (... ; <+... t[idx] ...+> && idx < E ; ...) S </smpl> Signed-off-by: Cyril Roelandt <tipecaml@gmail.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30rtlwifi: Eliminate two empty routinesLarry Finger
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30net: iwlegacy: remove unused variableGuenter Roeck
Fix: drivers/net/wireless/iwlegacy/4965.c: In function ‘il4965_post_associate’: drivers/net/wireless/iwlegacy/4965.c:1751:25: warning: variable ‘conf’ set but not used [-Wunused-but-set-variable] seen when building allmodconfig on x86_64 with W=1 by removing the unused variable. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30iwlegacy: fix antenna bitmaskChristian Lamparter
This patch is based on "iwlwifi: fix antenna bitmask". (362b0563b28506d53) Like the new iwlagn devices, the old 4965N device only supports a maximum of three antennas. Hence only three bits are used, the fourth bit is likely the A-MPDU indicator. Cc: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30bcma: add gpio_to_irqHauke Mehrtens
The old bcm47xx gpio code had support for gpio_to_irq, but the new code did not provide this function, but returned -ENXIO all the time. This patch adds the missing function. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30ssb: add gpio_to_irqHauke Mehrtens
The old bcm47xx gpio code had support for gpio_to_irq, but the new code did not provide this function, but returned -ENXIO all the time. This patch adds the missing function. arch/mips/bcm47xx/wgt634u.c calls gpio_to_irq() and got the correct irq number with the old gpio handling code. With this patch the code in wgt634u.c should work again. I do not have a wgt634u to test this. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwifiex: do not overwrite error code from lower layer driverBing Zhao
Instead of converting it to a bogus error code -1, we should return the original error code from lower layer driver. This error code will be printed so it may give user some clues on what has happened. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwifiex: don't return zero on failure paths in mwifiex_pcie_init()Alexey Khoroshilov
If pci_iomap() fails in mwifiex_pcie_init(), it breaks off initialization, deallocates all resources, but returns zero. The patch adds -EIO as return value in this case. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30rtl8723ae: Fix misspellings sucess->successAnatol Pomozov
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwl8k: Do not call STA specific cmds not supported by the AP fwYogesh Ashok Powar
While using STA mode in the AP firmware, avoid calling some firmware commands which are not supported by the AP firmware. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwl8k: Choose interface specific calls on vif typeYogesh Ashok Powar
Choose interface specific function calls based on interface type instead of firmware types. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwl8k: Add/Del self entry for AP interface onlyYogesh Ashok Powar
Add and delete self entry in the firmware sta database for AP interface only. We do not need such an entry for STA interface. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwl8k: Enable hw encryption for STA mode on AP fwYogesh Ashok Powar
Firmware supports hardware encryption feature for the station interface running on AP firmware. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwl8k: set mac type to MWL8K_MAC_TYPE_SECONDARY_CLIENTYogesh Ashok Powar
Set mac type for station interface on AP firmware as secondary. This allows the firmware to set specific characteristics for the STA interface. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwl8k: Allow adding station interface on AP firmwareYogesh Ashok Powar
When user wants to add a station interface when AP firmware is loaded & in-use, allow creating it and also notify user about the same. Allow adding max one STA interface for AP fw. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwl8k: Announce simultaneous AP-STA support on AP fwYogesh Ashok Powar
Specify the STA support in iface_limit and in wihpy->interface_modes Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwl8k: Move tx/rx antenna configuration to mwl8k_probe_hwYogesh Ashok Powar
This avoids calling mwl8k_cmd_rf_antenna functions every time mwl8k_config function is called. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwl8k: Do not call mwl8k_cmd_set_rf_channel unconditionallyYogesh Ashok Powar
Avoid calling mwl8k_cmd_set_rf_channel unconditionally by checking IEEE80211_CONF_CHANGE_CHANNEL. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwl8k: Stop bsses before hw specific commandsYogesh Ashok Powar
For the commands, that might change the hw characteristics of the PHY device, stop the running bsses and resume them once command is complete. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30bcma: register platform device for parallel flashRafał Miłecki
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30ssb: register platform device for parallel flashRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30ssb: trivial: use pflash helper variableRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30rt2x00: allow AP and mesh mode to operate simultaneouslyChun-Yeow Yeoh
Allow AP and Mesh mode to operate concurrently using single radio. Verify this using fonera 2.0n featuring RT3052 chipset and also TP-LINK TL-WN727N featuring RT5370 chipset. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemal.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30rt2x00: remove NOTICEStanislaw Gruszka
We use this macro only on 3 places - remove it and replace by other appropriate macros for printing messages. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30rt2800usb: move "TX status missed" messages to debug levelStanislaw Gruszka
Those messages can flood in dmesg, so do not print them by default. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30rt2x00: print warning, notice and info as defaultStanislaw Gruszka
Some messages provide useful information, but are disabled without CONFIG_RT2X00_DEBUG=y, so enable them by default Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-23 05:21:09 +0000