summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-02-02drm/bridge/sii8620: remove spare CBUS bring-up sequenceAndrzej Hajda
In case of MHL3 CBUS is bring-up already in sii8620_got_ecbus_speed. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-11-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: fix peer device capabilities read codeAndrzej Hajda
Peer capabilities should be read differently depending on protocol version. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-10-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: respond to feature requestsAndrzej Hajda
MHL3 protocol requires device to respond to feature request from peer. This minimal answer fulfills the requirement and allows to continue negotiation. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-9-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: add support for burst eMSC transmissionsAndrzej Hajda
Burst transmissions are used in MHL3 mode negotiation. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-8-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: initial support for eCBUS-S modeAndrzej Hajda
The Single-ended eCBUS Mode (eCBUS-S) mode provides 60 Mb/s full-duplex bidirectional traffic for three channels: - CBUS data (CBUS1 channel), - High-bandwidth MHL data (eMSC channel), - tunneling data (T-CBUS channel). It is required to fully support MHL3 dongles. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-6-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: add continuations to messagesAndrzej Hajda
Due to asynchronous nature of MHL flow of execution is dispersed. Logical continuation of some actions happens after response of peer, i.e in interrupt handler. To simplify coding continuation mechanism has been added - it is now possible to provide continuation callback, which will be called after peer responds to given action. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-5-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: add reading device capability registersAndrzej Hajda
This functionality is necessary to implement MHL3 modes. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-4-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: add MHL3 mode check helperAndrzej Hajda
MHL3 modes differs significantly from MHL1 mode, this helper will be used frequently to clearly distinguish them. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-3-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: simplify MHL3 mode settingAndrzej Hajda
It is not necessary to set REG_COC_CTL0, REG_MHL_COC_CTL1 registers. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-2-git-send-email-a.hajda@samsung.com
2017-02-02drm: qxl: Embed drm_device into driver structureGabriel Krisman Bertazi
This is the recommended way to create the drm_device structure, according to DRM documentation. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170127010548.27970-4-krisman@collabora.co.uk Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-02-02drm: qxl: Drop duplicated pci_device pointer attributeGabriel Krisman Bertazi
qxl_device duplicates the pointer to struct pci_dev, which is not needed since we already have it in the drm_device structure. Clean it up. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170127010548.27970-3-krisman@collabora.co.uk Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-02-02drm: qxl: Drop duplicated device pointer attributeGabriel Krisman Bertazi
qxl_device duplicates a pointer to struct device, which is not needed since we already have it in the drm_device structure. Clean it up. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170127010548.27970-2-krisman@collabora.co.uk Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-02-02drm: qxl: Drop misleading commentGabriel Krisman Bertazi
No longer true since commit 07f8d9bdb235 ("drm/qxl: add support for > 1 output"). qxl_num_crtc defaults to 4 and is configurable as a module parameter. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170127010548.27970-1-krisman@collabora.co.uk Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-02-02drm/bochs: Implement nomodesetMax Staudt
Up until now, the bochsdrm driver didn't handle the nomodeset option at boot, and didn't provide a "modeset" module option either. This patch implements both. The new parameter can be used by specifying bochs-drm.modeset=0 at boot time. Signed-off-by: Max Staudt <mstaudt@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/1484763012-17783-1-git-send-email-mstaudt@suse.de Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-02-01drm/vc4: Add DSI driverEric Anholt
The DSI0 and DSI1 blocks on the 2835 are related hardware blocks. Some registers move around, and the featureset is slightly different, as DSI1 (the 4-lane DSI) is a later version of the hardware block. This driver doesn't yet enable DSI0, since we don't have any hardware to test against, but it does put a lot of the register definitions and code in place. v2: Use the clk_hw interfaces, don't set CLK_IS_BASIC (from review by Stephen Boyd) Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/20170131192912.11316-1-eric@anholt.net
2017-02-01drm/vc4: Add support for feeding DSI encoders from the pixel valve.Eric Anholt
We have to set a different pixel format, which tells the hardware to use the pix_width field that's fed in sideband from the DSI encoder to divide the "pixel" clock. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161214194621.16499-6-eric@anholt.net
2017-02-01drm/vc4: Set up SCALER_DISPCTRL at boot.Eric Anholt
We want the HVS on, obviously, and we also want DSP3 (PV1's source) to be muxed from HVS channel 2 like we expect in vc4_crtc.c. The firmware wasn't setting the DSP3 mux up when both the LCD and HDMI were disabled. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161214194621.16499-5-eric@anholt.net
2017-02-01drm: Clean up the 1366x768 fixup codesTakashi Iwai
This is just a cleanup, no functional change. The fixup code for 1366x768 in drm_mode_create_from_cmdline_mode() is basically a copy of the existing code in drm_edid.c. Make the latter code public so that it can be called from the former function. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20170117164329.10551-1-tiwai@suse.de Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: include drm_crtc_internal.h to make sparse happy] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-02-01Merge remote-tracking branch 'airlied/drm-next' into drm-misc-nextDaniel Vetter
Backmerge to resync and also so that Ville can apply a cleanup patch from Takashi. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2017-02-01Merge branch 'exynos-drm-next' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next adding runtime PM support to MIC driver, and including some cleanups - especially using atomic helper functions instead of specific ones - and fixups. * 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: g2d: prevent integer overflow in drm/exynos: fix a timeout loop drm/exynos: use atomic helper commit drm/exynos: remove unnecessary codes drm/exynos: mic: Add runtime PM support drm/exynos: Stop using drm_framebuffer_unregister_private drm/exynos: mic: Fix parse_dt function drm/exynos: mic: Add mode_set callback function
2017-02-01Merge tag 'sunxi-drm-for-4.11' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next Allwinner DRM changes for 4.11 Just one minor fix. * tag 'sunxi-drm-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: drm/sun4i: Fix a return value in case of error
2017-02-01Merge branch 'drm-vmwgfx-next' of ↵Dave Airlie
git://people.freedesktop.org/~syeh/repos_linux into drm-next This is to address what we've discussed, moving some of the minor changes into a drm-next request. * 'drm-vmwgfx-next' of git://people.freedesktop.org/~syeh/repos_linux: drm/vmwgfx: Use kmemdup instead of kmalloc and memcpy drm/vmwgfx: Fix depth input into drm_mode_legacy_fb_format drm/vmwgfx: Fix a potential integer overflow drm/vmwgfx: Clear an uninitialized struct member drm/vmwgfx: Annotate ignored return values drm/vmwgfx: Clear uninitialized fields of a parameter
2017-02-01Merge branch 'drm-next-4.11' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next This is the main feature pull for radeon and amdgpu for 4.11. Highlights: - Power and clockgating improvements - Preliminary SR-IOV support - ttm buffer priority support - ttm eviction fixes - Removal of the ttm lru callbacks - Remove SI DPM quirks due to MC firmware issues - Handle VFCT with multiple vbioses - Powerplay improvements - Lots of driver cleanups * 'drm-next-4.11' of git://people.freedesktop.org/~agd5f/linux: (120 commits) drm/amdgpu: fix amdgpu_bo_va_mapping flags drm/amdgpu: access stolen VRAM directly on CZ (v2) drm/amdgpu: access stolen VRAM directly on KV/KB (v2) drm/amdgpu: fix kernel panic when dpm disabled on Kv. drm/amdgpu: fix dpm bug on Kv. drm/amd/powerplay: fix regresstion issue can't set manual dpm mode. drm/amdgpu: handle vfct with multiple vbios images drm/radeon: handle vfct with multiple vbios images drm/amdgpu: move misc si headers into amdgpu drm/amdgpu: remove unused header si_reg.h drm/radeon: drop pitcairn dpm quirks drm/amdgpu: drop pitcairn dpm quirks drm: radeon: radeon_ttm: Handle return NULL error from ioremap_nocache drm/amd/amdgpu/amdgpu_ttm: Handle return NULL error from ioremap_nocache drm/amdgpu: add new virtual display ID drm/amd/amdgpu: remove the uncessary parameter for ib scheduler drm/amdgpu: Bring bo creation in line with radeon driver (v2) drm/amd/powerplay: fix misspelling in header guard drm/ttm: revert "add optional LRU removal callback v2" drm/ttm: revert "implement LRU add callbacks v2" ...
2017-02-01Merge tag 'drm-misc-next-2017-01-30' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-next Another round of -misc stuff: - Noralf debugfs cleanup cleanup (not yet everything, some more driver patches awaiting acks). - More doc work. - edid/infoframe fixes from Ville. - misc 1-patch fixes all over, as usual Noralf needs this for his tinydrm pull request. * tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc: (48 commits) drm/vc4: Remove vc4_debugfs_cleanup() dma/fence: Export enable-signaling tracepoint for emission by drivers drm/tilcdc: Remove tilcdc_debugfs_cleanup() drm/tegra: Remove tegra_debugfs_cleanup() drm/sti: Remove drm_debugfs_remove_files() calls drm/radeon: Remove drm_debugfs_remove_files() call drm/omap: Remove omap_debugfs_cleanup() drm/hdlcd: Remove hdlcd_debugfs_cleanup() drm/etnaviv: Remove etnaviv_debugfs_cleanup() drm/etnaviv: allow build with COMPILE_TEST drm/amd/amdgpu: Remove drm_debugfs_remove_files() call drm/prime: Clarify DMA-BUF/GEM Object lifetime drm/ttm: Make sure BOs being swapped out are cacheable drm/atomic: Remove drm_atomic_debugfs_cleanup() drm: drm_minor_register(): Clean up debugfs on failure drm: debugfs: Remove all files automatically on cleanup drm/fourcc: add vivante tiled layout format modifiers drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F drm/edid: Set AVI infoframe Q even when QS=0 drm/edid: Introduce drm_hdmi_avi_infoframe_quant_range() ...
2017-02-01Merge tag 'drm/atmel-hlcdc/for-4.11' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/bbrezillon/linux into drm-next Contains a single patch to create the fbdev at driver's registration time instead of waiting for the connector status change. * tag 'drm/atmel-hlcdc/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bbrezillon/linux: drm/atmel-hlcdc: Rework the fbdev creation logic
2017-02-01Merge tag 'zxdrm-4.11' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into drm-next ZTE DRM driver updates for 4.11: - Add missing selection of VIDEOMODE_HELPERS in Kconfig, since ZTE DRM driver uses drm_display_mode_to_videomode(). - Enable HDMI audio support through SPDIF interface based on generic hdmi-audio-codec driver. - Enable VOU VL (Video Layer) to support overlay plane with scaling function. - Refine zx_vou driver a bit and then add TV Encoder output device support. [airlied: fixup plane format change] * tag 'zxdrm-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: drm: zte: add tvenc driver support dt: add bindings for ZTE tvenc device drm: zte: add function to configure vou_ctrl dividers drm: zte: move struct vou_inf into zx_vou driver drm: zte: add interlace mode support drm: zte: add overlay plane support drm: zte: add .atomic_disable hook to disable graphic layer drm: zte: make zx_plane accessible from zx_vou driver drm: zte: support hdmi audio through spdif drm: zte: select VIDEOMODE_HELPERS in Kconfig
2017-02-01Merge branch 'drm-intel-next' of git://anongit.freedesktop.org/git/drm-intel ↵Dave Airlie
into drm-next Updated pull request after I pulled first time :) * 'drm-intel-next' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: Pevent copying uninitialised garbage into vma->ggtt_view
2017-02-01Merge branch 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld into ↵Dave Airlie
drm-next Hope I'm not too late before the cutoff for the v4.11 with these patches. Mostly an asorted set of fixes that we have discovered while playing with the code and preparing for the next set of features. * 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld: drm: mali-dp: fix stride setting for multi-plane formats drm: mali-dp: Add plane offset to the plane's physical start address register drm: mali-dp: Check for sufficient address space drm: mali-dp: Check hw version matches device-tree drm: mali-dp: Rename malidp_input_format to malidp_pixel_format drm: mali-dp: fix Lx_CONTROL register fields clobber drm: mali-dp: Fix transposed horizontal/vertical flip drm: mali-dp: Fix destination size handling when rotating drm: mali-dp: Don't force source size == crtc size drm: mali-dp: Check more use cases in the plane's ->atomic_check() drm: malidp: Remove event_list member from struct malidp_drm drm/arm/malidp: Fix possible dereference of NULL
2017-01-31drm/color: un-inline drm_color_lut_extract()Jani Nikula
The function is not that big, but it's also not used for anything performance critical. Make it a normal function. As a side effect, this apparently makes sparse smarter about what it's doing, and gets rid of the warning: ./include/drm/drm_color_mgmt.h:53:28: warning: shift too big (4294967295) for type unsigned long ./include/drm/drm_color_mgmt.h:53:28: warning: cast truncates bits from constant value (8000000000000000 becomes 0) v2: rebased Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1485531291-24821-1-git-send-email-jani.nikula@intel.com
2017-01-31drm/docs: Fix documentation for drm_atomic_set_mode_for_crtcDhinakaran Pandiyan
drm_atomic_set_mode_for_crtc() modifies the .enable member of CRTC state but documentation claims otherwise, fix that. Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1485843518-28438-1-git-send-email-dhinakaran.pandiyan@intel.com
2017-01-31virtio-gpu: disable VIRGL with BE kernelLaurent Vivier
VIRTIO_GPU_F_VIRGL is added in features list only for LE kernel, so we must check for it only on LE kernel, otherwise virtio_has_feature() calls BUG() and crashes the kernel. Suggested-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/1485263549-28743-1-git-send-email-lvivier@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-01-31drm/exynos: g2d: prevent integer overflow inJoonyoung Shim
The size computations done in the ioctl function use an integer. If userspace submits a request with req->cmd_nr or req->cmd_buf_nr set to INT_MAX, the integer computations overflow later, leading to potential (kernel) memory corruption. Prevent this issue by enforcing a limit on the number of submitted commands, so that we have enough headroom later for the size computations. Note that this change has no impact on the currently available users in userspace, like e.g. libdrm/exynos. While at it, also make a comment about the size computation more detailed. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-01-31drm/exynos: fix a timeout loopDan Carpenter
We were trying to print an error message if we timed out here, but the loop actually ends with "tries" set to UINT_MAX and not zero. Fix this by changing from tries-- to --tries. A for loop would actually be the most natural way to do this. My fix means we only loop 99 times instead of 100 but that's probably ok. Fixes: a696394c5224 ('drm/exynos: mixer: simplify loop in vp_win_reset()') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-01-31drm/exynos: use atomic helper commitInki Dae
This patch replaces specific atomic commit function with atomic helper commit one. For this, it removes existing atomic commit function and relevant code specific to Exynos DRM and makes atomic helper commit to be used instead. Below are changes for the use of atomic helper commit: - add atomic_commit_tail callback specific to Exynos DRM . default implemention of atomic helper doesn't mesh well with runtime PM so the device driver which supports runtime PM should call drm_atomic_helper_commit_modeset_enables function prior to drm_atomic_helper_commit_planes function call. atomic_commit_tail callback implements this call ordering. - allow plane commit only in case that CRTC device is enabled. . for this, it calls atomic_helper_commit_planes function with DRM_PLANE_COMMIT_ACTIVE_ONLY flag in atomic_commit_tail callback. Signed-off-by: Inki Dae <inki.dae@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
2017-01-31drm/exynos: remove unnecessary codesInki Dae
This patch removes exynos_drm_crtc_cancel_page_flip call when drm is closed because at that time, events will be released by drm_events_release function. Changelog v1: - remove exynos_drm_crtc_cancel_page_flip function also because this funtion isn't used anymore. Signed-off-by: Inki Dae <inki.dae@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
2017-01-31drm/exynos: mic: Add runtime PM supportMarek Szyprowski
This patch adds runtime support calls to notify device core when MIC device is really in use. Runtime PM is implemented by enabling and disabling clocks like in other Exynos DRM subdrivers. Adding runtime PM support is needed to let power domain with this device to be turned off when display is not used. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-01-31drm/exynos: Stop using drm_framebuffer_unregister_privateDaniel Vetter
This is the deprecated function for when you embedded the framebuffer somewhere else (which breaks refcounting). But exynos is using drm_framebuffer_remove and a free-standing fb, so this is rendundant. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-01-31drm/exynos: mic: Fix parse_dt functionHoegeun Kwon
The OF graph is not necessary because the panel is a child of dsi. therefore, the parse_dt function of dsi does not need to check the remote_node connected to the panel. and the whole parse_dt function should be refactored later. Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-01-31drm/exynos: mic: Add mode_set callback functionHoegeun Kwon
Before applying the patch, used the of_get_videomode function to parse the display-timings in the panel which is the child driver of dsi in the devicetree. this is wrong. So removed the of_get_videomode and fixed to get videomode struct through mode_set callback function. Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-01-30drm/atmel-hlcdc: Rework the fbdev creation logicBoris Brezillon
Now that we wait for DRM panels to be available before registering the DRM device (returning -EPROBE_DEFER if the panel has not been probed yet), we no longer need to put the fbdev creation code in ->output_poll_changed(). This removes the 10 secs delay between DRM dev registration and fbdev creation (polling period = 10 seconds). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by: Alex Vazquez <avazquez.dev@gmail.com>
2017-01-30drm/vc4: Remove vc4_debugfs_cleanup()Noralf Trønnes
drm_debugfs_cleanup() now removes all minor->debugfs_list entries automatically, so the drm_driver.debugfs_cleanup callback is not needed. Cc: eric@anholt.net Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-17-noralf@tronnes.org
2017-01-28drm: zte: add tvenc driver supportShawn Guo
It adds the TV Encoder driver to support video output in PAL and NTSC format. The driver uses syscon/regmap interface to configure register bit sitting in SYSCTRL module for DAC power control. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Sean Paul <seanpaul@chromium.org>
2017-01-28drm: zte: add function to configure vou_ctrl dividersShawn Guo
The clock control module (CRM) cannot always provide desired frequency for all VOU output devices. That's why VOU integrates a few dividers to further divide the clocks from CRM. Let's add an interface for configuring these dividers. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Sean Paul <seanpaul@chromium.org>
2017-01-28drm: zte: move struct vou_inf into zx_vou driverShawn Guo
Although data in struct vou_inf is defined per output device, it doesn't belong to the device itself but VOU control module. All these data can just be defined in VOU driver, and output device driver only needs to invoke VOU driver function with device ID to enable/disable specific output device. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Sean Paul <seanpaul@chromium.org>
2017-01-28drm: zte: add interlace mode supportShawn Guo
It adds interlace mode support in VOU TIMING_CTRL and channel control block, so that VOU driver gets ready to support output device in interlace mode like TV Encoder. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Sean Paul <seanpaul@chromium.org>
2017-01-28drm: zte: add overlay plane supportShawn Guo
It enables VOU VL (Video Layer) to support overlay plane with scaling function. VL0 has some quirks on scaling support. We choose to skip it and only adds VL1 and VL2 into DRM core for now. Function zx_plane_atomic_disable() gets moved around with no changes to save a forward declaration. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Sean Paul <seanpaul@chromium.org>
2017-01-28drm: zte: add .atomic_disable hook to disable graphic layerShawn Guo
There are a few hardware bits for each graphic layer to control main/aux channel and clock selection, as well as the layer enabling. These bits sit outside the layer block itself, but in VOU control glue block. We currently set these bits up at CRTC initialization for once, and do not support disabling the layer. This patch creates a pair of functions zx_vou_layer_enable[disable] to be invoked from plane hooks .atomic_update and .atomic_disable to set up and tear down the layer. This is generic for both graphic and video layers, so it will make the overlay plane support to be added later much easier. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Sean Paul <seanpaul@chromium.org>
2017-01-28drm: zte: make zx_plane accessible from zx_vou driverShawn Guo
Move struct zx_plane from zx_plane.c to zx_plane.h, so that it can be accessed from zx_vou driver, and we can save the use of struct zx_layer_data completely. More importantly, those additional data used by VOU controller to enable/disable graphic and video layers can later be added and accessed much more easily from zx_vou driver. While at it, we make two changes to zx_plane_init() interface: - Encode struct device pointer in zx_plane, so that we do not need to pass it as a parameter. - Change return of zx_plane_init() from struct drm_plane pointer to error code, since we can get the pointer from zx_plane in zx_vou driver now. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Sean Paul <seanpaul@chromium.org>
2017-01-28drm: zte: support hdmi audio through spdifShawn Guo
It enables HDMI audio support through SPDIF interface based on generic hdmi-audio-codec driver. The HDMI hardware supports more audio interfaces than SPDIF, like I2S, which may be added later. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2017-01-28drm: zte: select VIDEOMODE_HELPERS in KconfigShawn Guo
ZTE DRM driver uses drm_display_mode_to_videomode() in function zx_crtc_enable(). Select VIDEOMODE_HELPERS in Kconfig to fix the following link error. LD vmlinux.o MODPOST vmlinux.o drivers/built-in.o: In function `zx_crtc_enable': :(.text+0xbdeb8): undefined reference to `drm_display_mode_to_videomode' Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 10:26:37 +0000