summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-09-06[SCSI] ibmvscsi: Fix little endian issuesAnton Blanchard
The hypervisor is big endian, so little endian kernel builds need to byteswap. [jejb: fix checkpatch errors] Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-06[SCSI] esas2r: Remove null test for stack allocated fw_coredump_bufferBradley Grove
Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-06[SCSI] esas2r: coccinelle - Replace memcpy with struct assignmentBradley Grove
Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-06[SCSI] esas2r: smatch - Remove test for impossible condition (uint8 > 255)Bradley Grove
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-06[SCSI] esas2r: smatch - Fix overrun due to sprintf appending NULLBradley Grove
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-06[SCSI] esas2r: smatch - Fix dereference that occurs prior to checkBradley Grove
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-06[SCSI] esas2r: smatch - Use biwise rather than logical AND for checking if ↵Bradley Grove
any bit set Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] sg: push file descriptor list locking down to per-device lockingVaughan Cao
Push file descriptor list locking down to per-device locking. Let sg_index_lock only protect device lookup. sdp->detached is also set and checked with this lock held. Signed-off-by: Vaughan Cao <vaughan.cao@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] sg: checking sdp->detached isn't protected when openVaughan Cao
@detached is set under the protection of sg_index_lock. Without getting the lock, new sfp will be added during sg removal and there is no chance for it to be picked out. So check with sg_index_lock held in sg_add_sfp(). Signed-off-by: Vaughan Cao <vaughan.cao@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] sg: no need sg_open_exclusive_lockVaughan Cao
Open exclusive check is protected by o_sem, no need sg_open_exclusive_lock. @exclude is used to record which type of rwsem we are holding. Signed-off-by: Vaughan Cao <vaughan.cao@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] sg: use rwsem to solve race during exclusive openVaughan Cao
A race condition may happen if two threads are both trying to open the same sg with O_EXCL simultaneously. It's possible that they both find fsds list is empty and get_exclude(sdp) returns 0, then they both call set_exclude() and break out from wait_event_interruptible and resume open. Now use rwsem to protect this process. Exclusive open gets write lock and others get read lock. The lock will be held until file descriptor is closed. This also leads 'exclude' only a status rather than a check mark. Signed-off-by: Vaughan Cao <vaughan.cao@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] scsi_debug: fix logical block provisioning support when ↵Akinobu Mita
unmap_alignment != 0 Commit b90ebc3d5c41c9164ae04efd2e4f8204c2a186f1 ("[SCSI] scsi_debug: fix logical block provisioning support") fixed several issues with logical block provisioning support, but it still doesn't properly fix the cases when unmap_alignment > 0. For example, load scsi_debug module with the following module parameters and make all blocks mapped by filling the storage with zero. # modprobe scsi_debug lbpu=1 unmap_alignment=1 unmap_granularity=4 # dd if=/dev/zero of=$DEV Then, try to unmap the first unmappable blocks at lba=1, but GET LBA STATUS unexpectedly reports that the last UNMAP has done nothing. # sg_unmap --lba=1 --num=4 $DEV # sg_get_lba_status --lba=1 $DEV descriptor LBA: 0x0000000000000001 blocks: 16383 mapped The problem is in map_index_to_lba(), which should return the first LBA which is corresponding to a given index of provisioning map (map_storep). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] scsi_debug: fix endianness bug in sdebug_build_parts()Akinobu Mita
With module parameter num_parts > 0, partition table is built on the ramdisk storage when loading the driver. Unfortunately, there is an endianness bug in sdebug_build_parts(). So the partition table is not correctly initialized on big-endian systems. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Tested-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Update the driver version to 8.06.00.08-k.Saurav Kashyap
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: print MAC via %pMR.Andy Shevchenko
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Correction to message ids.Saurav Kashyap
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Correctly print out/in mailbox registers.Joe Carnuccio
At mailbox/buffer debug level, print the correct values of the outgoing and incoming mailbox registers. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Add a new interface to update versions.Sawan Chandak
On any Adapter when we flash through FC/FCoE without card reset option it still shows the Running FW version in Flashed FW version. This new interface will be used by API to instruct the driver to update its cache versions. Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Move queue depth ramp down message to i/o debug level.Chad Dupuis
Unless there is a need to observe them, the queue depth ramp up/down messages are a nuisance and may cause the system to become unresponsive so move it a non-default logging level. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Select link initialization option bits from current ↵Joe Carnuccio
operating mode. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Add loopback IDC-TIME-EXTEND aen handling support.Santosh Vernekar
Earlier IDC-TIME-EXTEND aen was a nop and ignored by driver. We now have to handle the aen so that other protocol drivers can use time extension during some loopback operations. Signed-off-by: Santosh Vernekar <santosh.vernekar@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Set default critical temperature value in cases when ISPFX00 ↵Armen Baloyan
firmware doesn't provide it Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: QLAFX00 make over temperature AEN handling informational, ↵Armen Baloyan
add log for normal temperature AEN Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Correct Interrupt Register offset for ISPFX00Armen Baloyan
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Remove handling of Shutdown Requested AEN from ↵Armen Baloyan
qlafx00_process_aen(). Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Send all AENs for ISPFx00 to above layers.Armen Baloyan
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Add changes in initialization for ISPFX00 cards with BIOSArmen Baloyan
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Add changes to support extended IOs for ISPFX00Armen Baloyan
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Add missing FCP statistics to sysfs interface.Joe Carnuccio
Add the missing FCP statistics to sysfs. Add reset FCP statistics functionality via sysfs. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Make log message that prints when a completion status ↵Chad Dupuis
requires a port down more readable. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Add critical temperature handling for ISPFX00.Armen Baloyan
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Acked-by: Srinivasa Rao <srinivasa.rao@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Notify ISPFX00 firmware when driver is unloaded or system is ↵Armen Baloyan
shut down. Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Acked-by: Srinivasa Rao <srinivasa.rao@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Reconfigure thermal temperature.Joe Carnuccio
For supported ISPS, Read asic temperature by calling the GET PARAMS (type C) mailbox command. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Add setting of driver version string for vendor application.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Remove QL_DEBUG_LEVEL_17 defines from qla_nx.c.Chad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Add ISPFX00 specific bus reset routine.Armen Baloyan
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Perform warm reset every 2 minutes if firmware load fails ↵Armen Baloyan
for ISPFX00. Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Acked-by: Srinivasa Rao <srinivasa.rao@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Set factory reset recovery timeout to 10 min. for ISPFX00.Armen Baloyan
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Acked-by: Srinivasa Rao <srinivasa.rao@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Correct multiqueue offset calculations.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Fix incorrect test after list_for_each_entry() exits.Joe Carnuccio
list_for_each_entry() never leaves the iterator pointing to null. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Add support for ISP8044.Atul Deshmukh
[jejb: checkpatch fixes] Signed-off-by: Atul Deshmukh <atul.deshmukh@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Print some variables to hexadecimal string via %*phN formatOleksandr Khoshaba
The patch changes a specifier used to output some variables. Instead of using stack for each byte the '%*ph[CN]' allows to take a one pointer and prints entire buffer as a hexadecimal string with the separator ':' or ''. Signed-off-by: Oleksandr Khoshaba <Oleksandr.Khoshaba@gmail.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] mpt3sas: Remove phys on topology changeJan Vesely
Signed-off-by: Jan Vesely <jvesely@redhat.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] mpt2sas: Remove phys on topology change.Jan Vesely
Signed-off-by: Jan Vesely <jvesely@redhat.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] bfa: firmware update to 3.2.1.1Rasesh Mody
This patch updates the firmware to address the thermal notification issue Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] esas2r: ATTO Technology ExpressSAS 6G SAS/SATA RAID Adapter DriverBradley Grove
This is a new driver for ATTO Technology's ExpressSAS series of hardware RAID adapters. It supports the following adapters: - ExpressSAS R60F - ExpressSAS R680 - ExpressSAS R608 - ExpressSAS R644 Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] eata_pio: off by one in eata_pio_detect()Dan Carpenter
Smatch complains that the reg_IRQ[] array only has MAXIRQ (16) elements so we are one space beyond the end of the array here. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla4xxx: Update driver version to 5.04.00-k1Vikas Chaudhary
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla4xxx: Return error if minidump data collection failsVikas Chaudhary
Return error from function qla4_8xxx_collect_md_data() if minidump data collection fails. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla4xxx: Fix the minidump data collection check in for loopSantosh Vernekar
Signed-off-by: Santosh Vernekar <santosh.vernekar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 03:43:12 +0000