| Age | Commit message (Collapse) | Author |
|---|
|
The mix between probe/unprobe and reload flows causes to have an extra
mutex lock intf_state_mutex that generates LOCKDEP warning between it
and devlink_mutex. As a preparation for the future removal, separate
those flows.
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The interface state is constant at this stage and checked
before calling to the register/unregister reserved GIDs.
There is no need to double check it.
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Users of mlx5_eswitch_get_vport() are required to check return value
prior to passing mlx5_vport further. Fix all the places to do not skip
that check.
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Few spelling fixes throughout the file.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make better use of our struct types and type checking by passing
the actual Rx or Tx completion type rather than a generic void
pointer type.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With a reconfigure of each queue is needed a rebuild of
the matching debugfs information.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove an unnecessary layer over rx skb allocation.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clean up a couple of struct uses to make for better fast path
access.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rework the Rx buffer allocations to use pages twice when using
normal MTU in order to cut down on buffer allocation and mapping
overhead.
Instead of tracking individual pages, in which we may have
wasted half the space when using standard 1500 MTU, we track
buffers which use half pages, so we can use the second half
of the page rather than allocate and map a new page once the
first buffer has been used.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move ionic_rx_page_alloc() and ionic_rx_page_free() to earlier
in the file to make the next patch easier to review.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that the dpaa2-switch driver has basic I/O capabilities on the
switch port net_devices and multiple bridging domains are supported,
move the driver out of staging.
The dpaa2-switch driver is placed right next to the dpaa2-eth driver
since, in the near future, they will be sharing most of the data path.
I didn't implement code reuse in this patch series because I wanted to
keep it as small as possible.
Also, the README is removed from staging with the intention to add
proper rst documentation afterwards to actually match was is supported
by the driver.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Each time a switch port joins a bridge, it will start to use a FDB table
common with all the other switch ports that are under the same bridge.
This means that any VLAN added prior to a bridge join, will retain its
previous FDB table destination. With this patch, I choose to restrict
when a switch port can change it's upper device (either join or leave)
so that the driver does not have to delete all the previously installed
VLANs from the previous FDB and add them into the new one.
Thus, in the PRECHANGEUPPER notification we check if there are any VLAN
type upper devices and if that's true, deny the CHANGEUPPER.
This way, the user is not restricted in the topology but rather in the
order in which the setup is done: it must first create the bridging
domain layout and after that add the necessary VLAN devices if
necessary. The teardown is similar, the VLAN devices will need to be
destroyed prior to a change in the bridging layout.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Upon leaving a bridge, any MAC addresses learnt on the switch port prior
to this point have to be removed so that we preserve the bridging domain
configuration.
Restructure the dpaa2_switch_port_fdb_dump() function in order to have a
common dpaa2_switch_fdb_iterate() function between the FDB dump callback
and the fast age procedure. To accomplish this, add a new callback -
dpaa2_switch_fdb_cb_t - which will be called on each MAC addr and,
depending on the situation, will either dump the FDB entry into a
netlink message or will delete the address from the FDB table, in case
of the fast-age.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The DPAA2 Switch is not capable to handle traffic in a VLAN unaware
fashion, thus the previous handling of both the accepted upper devices
and the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING flag was wrong.
Fix this by checking if the bridge that we are joining is indeed VLAN
aware, if not return an error. Also, the RX VLAN filtering feature is
defined as 'on [fixed]' and the .ndo_vlan_rx_add_vid() and
.ndo_vlan_rx_kill_vid() callbacks are implemented just by recreating a
switchdev_obj_port_vlan object and then calling the same functions used
on the switchdev notifier path.
In addition, changing the vlan_filtering flag to 0 on a bridge under
which a DPAA2 switch interface is present is not supported, thus
rejected when SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING is received with
such a request.
This patch is also adding the use of the switchdev_handle_port_attr_set
function so that we can iterate through all the lower devices of the
bridge that the notification was received on and actually catch if the
user is trying to change the vlan_filtering state. Since on a VLAN
filtering change the net_device is the bridge, we also move the
dpaa2_switch_port_dev_check call so that we do not return NOTIFY_DONE
right away.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the notifier blocks register into the module_init() step, instead of
object probe, so that all DPSW devices probed by the dpaa2-switch driver
can use the same notifiers.
This will enable us to have a more straightforward approach in
determining if an event is intended for an object managed by this driver
or not. Previously, the dpaa2_switch_port_dev_check() function was
forced to also check the notifier block beside the net_device_ops
structure to determine if the event is for us or not.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Until now, the DPAA2 switch was not capable to properly setup its
switching domains depending on the existence, or lack thereof, of a
upper bridge device. This meant that all switch ports of a DPSW object
were switching by default even though they were not under the same
bridge device.
Another issue was the inability to actually add the CPU in the flooding
domains (broadcast, unknown unicast etc) of a particular switch port.
This meant that a simple ping on a switch interface was not possible
since no broadcast ARP frame would actually reach the CPU queues.
This patch tries to fix exactly these problems by:
* Creating and managing a FDB table for each flooding domain. This means
that when a switch interface is not bridged it will use its own FDB
table. While in bridged mode all DPAA2 switch interfaces under the
same upper will use the same FDB table, thus leverage the same FDB
entries.
* Adding a new MC firmware command - dpsw_set_egress_flood() - through
which the driver can setup the flooding domains as needed. For
example, when the switch interface is standalone, thus not in a
bridge with any other DPAA2 switch port, it will setup its broadcast
and unknown unicast flooding domains to only include the control
interface (the queues that reach the CPU and the driver can dequeue
from). This flooding domain changes when the interface joins a bridge
and is configured to include, beside the control interface, all other
DPAA2 switch interfaces.
We impose a minimum limit of FDB tables available equal to the number of
switch interfaces so that we guarantee that, in the maximal
configuration - all interfaces are standalone, each switch port will
have a private FDB table. At the same time, we only probe DPSW objects
that have the flooding and broadcast replicators configured to be per
FDB (DPSW_*_PER_FDB). Without this, the dpaa2-switch driver would not
be able to configure multiple switching domains.
At probe time, a FDB table will be allocated for each port. At a bridge
join event, the switch port will either continue to use the current FDB
table (if it's the first dpaa2-switch port to join that bridge) or will
switch to use the FDB table associated with the port that it's already
under the bridge. If a FDB switch is necessary, the private FDB table
which was previously used will be returned to the pool of unused FDBs.
Upon a bridge leave, the switch port needs a private FDB table thus it
will search and get the first unused FDB table. This way, all the other
ports remaining under the bridge will continue to use the same FDB
table.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enable the CTRL_IF of the switch object, now that all the pieces are in
place (buffer and queue management, interrupts, NAPI instances etc).
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement the .ndo_start_xmit() callback for the switch port interfaces.
For each of the switch ports, gather the corresponding queue
destination ID (QDID) necessary for Tx enqueueing.
We'll reserve 64 bytes for software annotations, where we keep a skb
backpointer used on the Tx confirmation side for releasing the allocated
memory. At the moment, we only support linear skbs.
Also, add support for the Tx confirmation path which for the most part
shares the code path with the normal Rx queue.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The dpaa2-ethsw supports only one Rx queue that is shared by all switch
ports. This means that information about which port was the ingress port
for a specific frame needs to be passed in metadata. In our case, the
Flow Context (FLC) field from the frame descriptor holds this
information. Besides the interface ID of the ingress port we also
receive the virtual QDID of the port. Below is a visual description of
the 64 bits of FLC.
63 47 31 15 0
+---------------------------------------------------+
| | | | |
| RESERVED | IF_ID | RESERVED | IF QDID |
| | | | |
+---------------------------------------------------+
Because all switch ports share the same Rx and Tx conf queues, NAPI
management takes into consideration when there is at least one switch
interface open to enable the NAPI instance.
The Rx path is common, for the most part, for both Rx and Tx conf with
the mention that each of them has its own consume function of a frame
descriptor. Dequeueing from a FQ, consuming dequeued store and also the
NAPI poll function is common between both queues.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Setup interrupts on the control interface queues. We do not force an
exact affinity between the interrupts received from a specific queue and
a cpu.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allocate and setup a buffer pool, needed on the Rx path of the control
interface. Also, define the Rx buffer size seen by the WRIOP from the
PAGE_SIZE buffers seeded.
Also, create the needed Rx rings for both frame queues used on the
control interface. On the Rx path, when a pull-dequeue operation is
performed on a software portal, available frame descriptors are put in a
ring - a DMA memory storage - for further usage.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce a new structure to hold all necessary info related to an RX
queue for the control interface and populate the FQ IDs.
We only have one Rx queue and one Tx confirmation queue on the control
interface, both shared by all the switch ports.
Also, increase the minimum version of the object supported by the driver
since for a basic switch driver support we'll be in need for some ABIs
added in the latest version of firmware.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the dpaa2-switch already listens for SWITCHDEV_FDB_ADD_TO_DEVICE /
SWITCHDEV_FDB_DEL_TO_DEVICE events emitted by the bridge, we don't need
the bridge bypass operations, and now is a good time to delete them. All
'bridge fdb' commands need the 'master' flag specified now.
In fact, having the obsolete .ndo_fdb_{add|del} callbacks would even
complicate the bridge leave/join procedures without any real benefit.
Every FDB entry is installed in an FDB ID as far as the hardware is
concerned, and the dpaa2-switch ports change their FDB ID when they join
or leave a bridge. So we would need to manually delete these FDB entries
when the FDB ID changes. That's because, unlike FDB entries added
through switchdev, where the bridge automatically deletes those on
leave, there isn't anybody who will remove the static FDB entries
installed via the bridge bypass operations upon a change in the upper
device.
Note that we still need .ndo_fdb_dump though. The dpaa2-switch does not
emit any interrupts when a new address is learnt, so we cannot keep the
bridge FDB in sync with the hardware FDB. Therefore, we need this
callback to get a chance to print the FDB entries that were dynamically
learnt by our hardware.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
By default, the DPSW object is configured with VLAN ID 1 in the VLAN
table, which all ports are member of. This entry in the VLAN table
selects the same FDB ID for all ports, meaning that forwarding between
ports is permitted. This is unlike the switchdev model, where each port
should operate as standalone by default.
To make the switch operate in standalone ports mode, we need the VLAN
table to select a unique FDB ID for each port. In order to do that, we
need to simply delete the VLAN 1 created automatically by firmware, and
let dpaa2_switch_port_init take over, by readding VLAN ID 1, but
pointing towards a unique FDB ID.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is removing the current configuration of learning and
flooding states per switch port because they are essentially broken in
terms of integration with the switchdev APIs and the bridge
understanding of these states.
First of all, the learning state is a per switch port configuration
while the dpaa2-switch driver was using it to configure the entire
bridging domain. This is broken since the software learning state could
be out of sync with the hardware state when ports from the same bridging
domain are configured by the user with different learning parameters.
The BR_FLOOD flag has been misinterpreted as well. Instead of denoting
whether unicast traffic for which there is no FDB entry will be flooded
towards a given port, the dpaa2-switch used the flag to configure
whether or not a frame with an unknown destination received on a given
port should be flooded or not. In summary, it was used as ingress
setting instead of a egress one.
Also, remove the unnecessary call to dpsw_if_set_broadcast() and the API
definition. The HW default is to let all switch ports to be able to
flood broadcast traffic thus there is no need to call the API again.
Instead of trying to patch things up, just remove the support for the
moment so that we'll add it back cleanly once the driver is out of
staging.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit fd5736bf9f23 ("enetc: Workaround for MDIO register access
issue"), enetc_refill_rx_ring no longer updates the RX BD ring's
consumer index, that is left to be done by the caller. This has led to
bugs such as the ones found in 96a5223b918c ("net: enetc: remove bogus
write to SIRXIDR from enetc_setup_rxbdr") and 3a5d12c9be6f ("net: enetc:
keep RX ring consumer index in sync with hardware"), so it is desirable
that we move back the update of the consumer index into enetc_refill_rx_ring.
The trouble with that is the different MDIO locking context for the two
callers of enetc_refill_rx_ring:
- enetc_clean_rx_ring runs under enetc_lock_mdio()
- enetc_setup_rxbdr runs outside enetc_lock_mdio()
Simplify the callers of enetc_refill_rx_ring by making enetc_setup_rxbdr
explicitly take enetc_lock_mdio() around the call. It will be the only
place in need of ensuring the hot accessors can be used.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no other reason why this forward declaration exists rather than
poor ordering of the functions.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch moves the NAPI enetc_poll after enetc_clean_rx_ring such that
we can delete the forward declarations.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The active_offloads variable of enetc_ndev_priv has an enum type, use it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we iterate through the BDs in the RX ring, the software producer
index (which is already passed by value to enetc_rxbd_next) lags behind,
and we end up with this funny looking "++i == rx_ring->bd_count" check
so that we drag it after us.
Let's pass the software producer index "i" by reference, so that
enetc_rxbd_next can increment it by itself (mod rx_ring->bd_count),
especially since enetc_rxbd_next has to increment the index anyway.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit 3222b5b613db ("net: enetc: initialize RFS/RSS memories for
unused ports too") there is a requirement to initialize the memories of
unused PFs too, which has left the probe path in a bit of a rough shape,
because we basically have a minimal initialization path for unused PFs
which is separate from the main initialization path.
Now that initializing a control BD ring is as simple as calling
enetc_setup_cbdr, let's move that outside of enetc_alloc_si_resources
(unused PFs don't need classification rules, so no point in allocating
them just to free them later).
But enetc_alloc_si_resources is called both for PFs and for VFs, so now
that enetc_setup_cbdr is no longer called from this common function, it
means that the VF probe path needs to explicitly call enetc_setup_cbdr
too.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It makes no sense from an API perspective to first initialize some
portion of struct enetc_cbdr outside enetc_setup_cbdr, then leave that
function to initialize the rest. enetc_setup_cbdr should be able to
perform all initialization given a zero-initialized struct enetc_cbdr.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All call sites call enetc_clear_cbdr and enetc_free_cbdr one after
another, so let's combine the two functions into a single method named
enetc_teardown_cbdr which does both, and in the same order.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
enetc_clear_cbdr depends on struct enetc_hw because it must disable the
ring through a register write. We'd like to remove that dependency, so
let's do what's already done with the producer and consumer indices,
which is to save the iomem address in a variable kept in struct enetc_cbdr.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
enetc_alloc_cbdr and enetc_setup_cbdr are always called one after
another, so we can simplify the callers and make enetc_setup_cbdr do
everything that's needed.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We shouldn't need to pass the struct device *dev to enetc CBDR APIs over
and over again, so save this inside struct enetc_cbdr::dma_dev and avoid
calling it from the enetc_free_cbdr functions.
This breaks the dependency of the cbdr API from struct enetc_si (the
station interface).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since there is a dedicated file in this driver for interacting with
control BD rings, it makes sense to move these functions there.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace repeated "defxx" strings with a reference to the DRV_NAME macro
and then use the driver's name rather that the bus address with resource
requests so as to have contents of /proc/iomem and /proc/ioports more
meaningful to the user, in line with what drivers usually do.
So rather than say:
5000-50ff : DEC FDDIcontroller/EISA Adapter
5000-503f : 00:05
5040-5043 : 00:05
5400-54ff : DEC FDDIcontroller/EISA Adapter
5800-58ff : DEC FDDIcontroller/EISA Adapter
5c00-5cff : DEC FDDIcontroller/EISA Adapter
5c80-5cbf : 00:05
or:
620c080020000-620c08002007f : 0031:02:04.0
620c080020000-620c08002007f : 0031:02:04.0
620c080030000-620c08003ffff : 0031:02:04.0
or:
1f100000-1f10003f : tc2
we report:
5000-50ff : DEC FDDIcontroller/EISA Adapter
5000-503f : defxx
5040-5043 : defxx
5400-54ff : DEC FDDIcontroller/EISA Adapter
5800-58ff : DEC FDDIcontroller/EISA Adapter
5c00-5cff : DEC FDDIcontroller/EISA Adapter
5c80-5cbf : defxx
and:
620c080020000-620c08002007f : 0031:02:04.0
620c080020000-620c08002007f : defxx
620c080030000-620c08003ffff : 0031:02:04.0
and:
1f100000-1f10003f : defxx
respectively for the DEFEA (EISA), DEFPA (PCI), and DEFTA (TURBOchannel)
adapters.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recent versions of the PCI Express specification have deprecated support
for I/O transactions and actually some PCIe host bridges, such as Power
Systems Host Bridge 4 (PHB4), do not implement them. Conversely a DEFEA
adapter can have its MMIO decoding disabled with ECU (EISA Configuration
Utility) and therefore not available for us with the resource allocation
infrastructure we implement.
However either I/O address space will always be available for use with
the DEFEA (EISA) and DEFPA (PCI) adapters and both have double address
decoding implemented in hardware for Control and Status Register access.
The two kinds of adapters can be present both at once in a single mixed
PCI/EISA system. For the DEFTA (TURBOchannel) variant there is no issue
as there has been no port I/O address space defined for that bus.
To make people's life easier and the driver more robust remove the
DEFXX_MMIO configuration option so as to rather than making the choice
for the I/O address space to use at build time for all the adapters
installed in the system let the driver choose the most suitable address
space dynamically on a case-by-case basis at run time. Make MMIO the
default and resort to port I/O should the default fail for some reason.
This way multiple adapters installed in one system can use different I/O
address spaces each, in particular in the presence of DEFEA adapters in
a pure-EISA or a mixed EISA/PCI system (it is expected that DEFPA boards
will use MMIO in normal circumstances).
The choice of the I/O address space to use continues being reported by
the driver on startup, e.g.:
eisa 00:05: EISA: slot 5: DEC3002 detected
defxx: v1.12 2021/03/10 Lawrence V. Stefani and others
00:05: DEFEA at I/O addr = 0x5000, IRQ = 10, Hardware addr = 00-00-f8-c8-b3-b6
00:05: registered as fddi0
and:
defxx: v1.12 2021/03/10 Lawrence V. Stefani and others
0031:02:04.0: DEFPA at MMIO addr = 0x620c080020000, IRQ = 57, Hardware addr = 00-60-6d-93-91-98
0031:02:04.0: registered as fddi0
and:
defxx: v1.12 2021/03/10 Lawrence V. Stefani and others
tc2: DEFTA at MMIO addr = 0x1f100000, IRQ = 21, Hardware addr = 08-00-2b-b0-8b-1e
tc2: registered as fddi0
so there is no need to add further information.
The change is supposed to cause a negligible performance hit as I/O
accessors will now have code executed conditionally at run time.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recent versions of the PCI Express specification have deprecated support
for I/O transactions and actually some PCIe host bridges, such as Power
Systems Host Bridge 4 (PHB4), do not implement them.
The default kernel configuration choice for the defxx driver is the use
of I/O ports rather than MMIO for PCI and EISA systems. It may have
made sense as a conservative backwards compatible choice back when MMIO
operation support was added to the driver as a part of TURBOchannel bus
support. However nowadays this configuration choice makes the driver
unusable with systems that do not implement I/O transactions for PCIe.
Make DEFXX_MMIO the configuration default then, except where configured
for EISA. This exception is because an EISA adapter can have its MMIO
decoding disabled with ECU (EISA Configuration Utility) and therefore
not available with the resource allocation infrastructure we implement,
while port I/O is always readily available as it uses slot-specific
addressing, directly mapped to the slot an option card has been placed
in and handled with our EISA bus support core. Conversely a kernel that
supports modern systems which may not have I/O transactions implemented
for PCIe will usually not be expected to handle legacy EISA systems.
The change of the default will make it easier for people, including but
not limited to distribution packagers, to make a working choice for the
driver.
Update the option description accordingly and while at it replace the
potentially ambiguous PIO acronym with IOP for "port I/O" vs "I/O ports"
according to our nomenclature used elsewhere.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: e89a2cfb7d7b ("[TC] defxx: TURBOchannel support")
Cc: stable@vger.kernel.org # v2.6.21+
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recent versions of the PCI Express specification have deprecated support
for I/O transactions and actually some PCIe host bridges, such as Power
Systems Host Bridge 4 (PHB4), do not implement them.
For those systems the PCI BARs that request a mapping in the I/O space
have the length recorded in the corresponding PCI resource set to zero,
which makes it unassigned:
# lspci -s 0031:02:04.0 -v
0031:02:04.0 FDDI network controller: Digital Equipment Corporation PCI-to-PDQ Interface Chip [PFI] FDDI (DEFPA) (rev 02)
Subsystem: Digital Equipment Corporation FDDIcontroller/PCI (DEFPA)
Flags: bus master, medium devsel, latency 136, IRQ 57, NUMA node 8
Memory at 620c080020000 (32-bit, non-prefetchable) [size=128]
I/O ports at <unassigned> [disabled]
Memory at 620c080030000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Kernel driver in use: defxx
Kernel modules: defxx
#
Regardless the driver goes ahead and requests it (here observed with a
Raptor Talos II POWER9 system), resulting in an odd /proc/ioport entry:
# cat /proc/ioports
00000000-ffffffffffffffff : 0031:02:04.0
#
Furthermore, the system gets confused as the driver actually continues
and pokes at those locations, causing a flood of messages being output
to the system console by the underlying system firmware, like:
defxx: v1.11 2014/07/01 Lawrence V. Stefani and others
defxx 0031:02:04.0: enabling device (0140 -> 0142)
LPC[000]: Got SYNC no-response error. Error address reg: 0xd0010000
IPMI: dropping non severe PEL event
LPC[000]: Got SYNC no-response error. Error address reg: 0xd0010014
IPMI: dropping non severe PEL event
LPC[000]: Got SYNC no-response error. Error address reg: 0xd0010014
IPMI: dropping non severe PEL event
and so on and so on (possibly intermixed actually, as there's no locking
between the kernel and the firmware in console port access with this
particular system, but cleaned up above for clarity), and once some 10k
of such pairs of the latter two messages have been produced an interace
eventually shows up in a useless state:
0031:02:04.0: DEFPA at I/O addr = 0x0, IRQ = 57, Hardware addr = 00-00-00-00-00-00
This was not expected to happen as resource handling was added to the
driver a while ago, because it was not known at that time that a PCI
system would be possible that cannot assign port I/O resources, and
oddly enough `request_region' does not fail, which would have caught it.
Correct the problem then by checking for the length of zero for the CSR
resource and bail out gracefully refusing to register an interface if
that turns out to be the case, producing messages like:
defxx: v1.11 2014/07/01 Lawrence V. Stefani and others
0031:02:04.0: Cannot use I/O, no address set, aborting
0031:02:04.0: Recompile driver with "CONFIG_DEFXX_MMIO=y"
Keep the original check for the EISA MMIO resource as implemented,
because in that case the length is hardwired to 0x400 as a consequence
of how the compare/mask address decoding works in the ESIC chip and it
is only the base address that is set to zero if MMIO has been disabled
for the adapter in EISA configuration, which in turn could be a valid
bus address in a legacy-free system implementing PCI, especially for
port I/O.
Where the EISA MMIO resource has been disabled for the adapter in EISA
configuration this arrangement keeps producing messages like:
eisa 00:05: EISA: slot 5: DEC3002 detected
defxx: v1.11 2014/07/01 Lawrence V. Stefani and others
00:05: Cannot use MMIO, no address set, aborting
00:05: Recompile driver with "CONFIG_DEFXX_MMIO=n"
00:05: Or run ECU and set adapter's MMIO location
with the last two lines now swapped for easier handling in the driver.
There is no need to check for and catch the case of a port I/O resource
not having been assigned for EISA as the adapter uses the slot-specific
I/O space, which gets assigned by how EISA has been specified and maps
directly to the particular slot an option card has been placed in. And
the EISA variant of the adapter has additional registers that are only
accessible via the port I/O space anyway.
While at it factor out the error message calls into helpers and fix an
argument order bug with the `pr_err' call now in `dfx_register_res_err'.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 4d0438e56a8f ("defxx: Clean up DEFEA resource management")
Cc: stable@vger.kernel.org # v3.19+
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MFDE.irisc_id and MFDE.event_id were adjusted according to what is
actually implemented in firmware.
Adjust the shift and size of these fields in mlxsw as well.
Note that the displacement of the first field is not a regression.
It was always incorrect and therefore reported "0".
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the MFDE.log_ip field to devlink health reporter in order to ease
firmware debug. This field encodes the instruction pointer that triggered
the CR space timeout.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend MFDE (Monitoring FW Debug) register with new field specifying the
instruction pointer that triggered the CR space timeout.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The indicated version fixes the following two issues:
- MIRROR_SAMPLER_ACTION.mirror_probability_rate inverted. This has
implication for per-flow sampling.
- When adjacency is replaced-if-inactive (RATR.opcode=3), bad parameter
was reported when replacing an active entry. This breaks offload of
resilient next-hop groups.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The comment did not include the register name.
Add `pmaos` to align the comment with other comments.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
'Uppers' is not clear enough for all users when referring to upper
devices.
Reword the error message so it will be clearer.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As explained in commit 29d98f54a4fe ("net: enetc: allow hardware
timestamping on TX queues with tc-etf enabled"), hardware TX
timestamping requires an skb with skb->tstamp = 0. When a packet is sent
with SO_TXTIME, the skb->skb_mstamp_ns corrupts the value of skb->tstamp,
so the drivers need to explicitly reset skb->tstamp to zero after
consuming the TX time.
Create a helper named skb_txtime_consumed() which does just that. All
drivers which offload TC_SETUP_QDISC_ETF should implement it, and it
would make it easier to assess during review whether they do the right
thing in order to be compatible with hardware timestamping or not.
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Following the recent update to MAINTAINERS update my e-mail address.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Following the recent update to MAINTAINERS update my e-mail address.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
