| Age | Commit message (Collapse) | Author |
|---|
|
Pass a flag to request kernel thread use.
Fixes: 01fcb1cbc88e ("vhost: allow device that does not depend on vhost worker")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
If subblock size is large (e.g. 1G) 32 bit math involving it
can overflow. Rather than try to catch all instances of that,
let's tweak block size to 64 bit.
It ripples through UAPI which is an ABI change, but it's not too late to
make it, and it will allow supporting >4Gbyte blocks while might
become necessary down the road.
Fixes: 5f1f79bbc9e26 ("virtio-mem: Paravirtualized memory hotplug")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This introduces device managed versions of functions used to register
remoteproc devices, add support for remoteproc driver specific
resource control, enables remoteproc drivers to specify ELF class and
machine for coredumps. It integrates pm_runtime in the core for
keeping resources active while the remote is booted and holds a wake
source while recoverying a remote processor after a firmware crash.
It refactors the remoteproc device's allocation path to simplify the
logic, fix a few cleanup bugs and to not clone const strings onto the
heap. Debugfs code is simplifies using the DEFINE_SHOW_ATTRIBUTE and a
zero-length array is replaced with flexible-array.
A new remoteproc driver for the JZ47xx VPU is introduced, the Qualcomm
SM8250 gains support for audio, compute and sensor remoteprocs and the
Qualcomm SC7180 modem support is cleaned up and improved.
The Qualcomm glink subsystem-restart driver is merged into the main
glink driver, the Qualcomm sysmon driver is extended to properly
notify remote processors about all other remote processors' state
transitions"
* tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (43 commits)
remoteproc: Fix an error code in devm_rproc_alloc()
MAINTAINERS: Add myself as reviewer for Ingenic rproc driver
remoteproc: ingenic: Added remoteproc driver
remoteproc: Add support for runtime PM
dt-bindings: Document JZ47xx VPU auxiliary processor
remoteproc: wcss: Fix arguments passed to qcom_add_glink_subdev()
remoteproc: Fix and restore the parenting hierarchy for vdev
remoteproc: Fall back to using parent memory pool if no dedicated available
remoteproc: Replace zero-length array with flexible-array
remoteproc: wcss: add support for rpmsg communication
remoteproc: core: Prevent system suspend during remoteproc recovery
remoteproc: qcom_q6v5_mss: Remove unused q6v5_da_to_va function
remoteproc: qcom_q6v5_mss: map/unmap mpss segments before/after use
remoteproc: qcom_q6v5_mss: Drop accesses to MPSS PERPH register space
dt-bindings: remoteproc: qcom: Replace halt-nav with spare-regs
remoteproc: qcom: pas: Add SM8250 PAS remoteprocs
dt-bindings: remoteproc: qcom: pas: Add SM8250 remoteprocs
remoteproc: qcom_q6v5_mss: Extract mba/mpss from memory-region
dt-bindings: remoteproc: qcom: Use memory-region to reference memory
remoteproc: qcom: pas: Add SC7180 Modem support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull rpmsg updates from Bjorn Andersson:
"This replaces a zero-length array with flexible-array and fixes a typo
in a comment in the rpmsg core"
* tag 'rpmsg-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
rpmsg: Replace zero-length array with flexible-array
rpmsg: fix a comment typo for rpmsg_device_match()
|
|
Pull ceph updates from Ilya Dryomov:
"The highlights are:
- OSD/MDS latency and caps cache metrics infrastructure for the
filesytem (Xiubo Li). Currently available through debugfs and will
be periodically sent to the MDS in the future.
- support for replica reads (balanced and localized reads) for rbd
and the filesystem (myself). The default remains to always read
from primary, users can opt-in with the new crush_location and
read_from_replica options. Note that reading from replica is safe
for general use only since Octopus.
- support for RADOS allocation hint flags (myself). Currently used by
rbd to propagate the compressible/incompressible hint given with
the new compression_hint map option and ready for passing on more
advanced hints, e.g. based on fadvise() from the filesystem.
- support for efficient cross-quota-realm renames (Luis Henriques)
- assorted cap handling improvements and cleanups, particularly
untangling some of the locking (Jeff Layton)"
* tag 'ceph-for-5.8-rc1' of git://github.com/ceph/ceph-client: (29 commits)
rbd: compression_hint option
libceph: support for alloc hint flags
libceph: read_from_replica option
libceph: support for balanced and localized reads
libceph: crush_location infrastructure
libceph: decode CRUSH device/bucket types and names
libceph: add non-asserting rbtree insertion helper
ceph: skip checking caps when session reconnecting and releasing reqs
ceph: make sure mdsc->mutex is nested in s->s_mutex to fix dead lock
ceph: don't return -ESTALE if there's still an open file
libceph, rbd: replace zero-length array with flexible-array
ceph: allow rename operation under different quota realms
ceph: normalize 'delta' parameter usage in check_quota_exceeded
ceph: ceph_kick_flushing_caps needs the s_mutex
ceph: request expedited service on session's last cap flush
ceph: convert mdsc->cap_dirty to a per-session list
ceph: reset i_requested_max_size if file write is not wanted
ceph: throw a warning if we destroy session with mutex still locked
ceph: fix potential race in ceph_check_caps
ceph: document what protects i_dirty_item and i_flushing_item
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add support for multi-function devices in pci code.
- Enable PF-VF linking for architectures using the pdev->no_vf_scan
flag (currently just s390).
- Add reipl from NVMe support.
- Get rid of critical section cleanup in entry.S.
- Refactor PNSO CHSC (perform network subchannel operation) in cio and
qeth.
- QDIO interrupts and error handling fixes and improvements, more
refactoring changes.
- Align ioremap() with generic code.
- Accept requests without the prefetch bit set in vfio-ccw.
- Enable path handling via two new regions in vfio-ccw.
- Other small fixes and improvements all over the code.
* tag 's390-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (52 commits)
vfio-ccw: make vfio_ccw_regops variables declarations static
vfio-ccw: Add trace for CRW event
vfio-ccw: Wire up the CRW irq and CRW region
vfio-ccw: Introduce a new CRW region
vfio-ccw: Refactor IRQ handlers
vfio-ccw: Introduce a new schib region
vfio-ccw: Refactor the unregister of the async regions
vfio-ccw: Register a chp_event callback for vfio-ccw
vfio-ccw: Introduce new helper functions to free/destroy regions
vfio-ccw: document possible errors
vfio-ccw: Enable transparent CCW IPL from DASD
s390/pci: Log new handle in clp_disable_fh()
s390/cio, s390/qeth: cleanup PNSO CHSC
s390/qdio: remove q->first_to_kick
s390/qdio: fix up qdio_start_irq() kerneldoc
s390: remove critical section cleanup from entry.S
s390: add machine check SIGP
s390/pci: ioremap() align with generic code
s390/ap: introduce new ap function ap_get_qdev()
Documentation/s390: Update / remove developerWorks web links
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"A big part of this is a change in how devices get connected to IOMMUs
in the core code. It contains the change from the old add_device() /
remove_device() to the new probe_device() / release_device()
call-backs.
As a result functionality that was previously in the IOMMU drivers has
been moved to the IOMMU core code, including IOMMU group allocation
for each device. The reason for this change was to get more robust
allocation of default domains for the iommu groups.
A couple of fixes were necessary after this was merged into the IOMMU
tree, but there are no known bugs left. The last fix is applied on-top
of the merge commit for the topic branches.
Other than that change, we have:
- Removal of the driver private domain handling in the Intel VT-d
driver. This was fragile code and I am glad it is gone now.
- More Intel VT-d updates from Lu Baolu:
- Nested Shared Virtual Addressing (SVA) support to the Intel VT-d
driver
- Replacement of the Intel SVM interfaces to the common IOMMU SVA
API
- SVA Page Request draining support
- ARM-SMMU Updates from Will:
- Avoid mapping reserved MMIO space on SMMUv3, so that it can be
claimed by the PMU driver
- Use xarray to manage ASIDs on SMMUv3
- Reword confusing shutdown message
- DT compatible string updates
- Allow implementations to override the default domain type
- A new IOMMU driver for the Allwinner Sun50i platform
- Support for ATS gets disabled for untrusted devices (like
Thunderbolt devices). This includes a PCI patch, acked by Bjorn.
- Some cleanups to the AMD IOMMU driver to make more use of IOMMU
core features.
- Unification of some printk formats in the Intel and AMD IOMMU
drivers and in the IOVA code.
- Updates for DT bindings
- A number of smaller fixes and cleanups.
* tag 'iommu-updates-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (109 commits)
iommu: Check for deferred attach in iommu_group_do_dma_attach()
iommu/amd: Remove redundant devid checks
iommu/amd: Store dev_data as device iommu private data
iommu/amd: Merge private header files
iommu/amd: Remove PD_DMA_OPS_MASK
iommu/amd: Consolidate domain allocation/freeing
iommu/amd: Free page-table in protection_domain_free()
iommu/amd: Allocate page-table in protection_domain_init()
iommu/amd: Let free_pagetable() not rely on domain->pt_root
iommu/amd: Unexport get_dev_data()
iommu/vt-d: Fix compile warning
iommu/vt-d: Remove real DMA lookup in find_domain
iommu/vt-d: Allocate domain info for real DMA sub-devices
iommu/vt-d: Only clear real DMA device's context entries
iommu: Remove iommu_sva_ops::mm_exit()
uacce: Remove mm_exit() op
iommu/sun50i: Constify sun50i_iommu_ops
iommu/hyper-v: Constify hyperv_ir_domain_ops
iommu/vt-d: Use pci_ats_supported()
iommu/arm-smmu-v3: Use pci_ats_supported()
...
|
|
Pull drm msm updates from Dave Airlie:
"This tree has been in next for a couple of weeks, but Rob missed an
arm32 build issue, so I was awaiting the tree with a patch reverted.
- new gpu support: a405, a640, a650
- dpu: color processing support
- mdp5: support for msm8x36 (the thing with a405)
- some prep work for per-context pagetables (ie the part that does
not depend on in-flight iommu patches)
- last but not least, UABI update for submit ioctl to support syncobj
(from Bas)"
* tag 'drm-next-msm-5.8-2020-06-08' of git://anongit.freedesktop.org/drm/drm: (30 commits)
Revert "drm/msm/dpu: add support for clk and bw scaling for display"
drm/msm/a6xx: skip HFI set freq if GMU is powered down
drm/msm: Update the MMU helper function APIs
drm/msm: Refactor address space initialization
drm/msm: Attach the IOMMU device during initialization
drm/msm/dpu: dpu_setup_dspp_pcc() can be static
drm/msm/a6xx: a6xx_hfi_send_start() can be static
drm/msm/a4xx: add a405_registers for a405 device
drm/msm/a4xx: add adreno a405 support
drm/msm/a6xx: update a6xx_hw_init for A640 and A650
drm/msm/a6xx: enable GMU log
drm/msm/a6xx: update pdc/rscc GMU registers for A640/A650
drm/msm/a6xx: A640/A650 GMU firmware path
drm/msm/a6xx: HFI v2 for A640 and A650
drm/msm/a6xx: add A640/A650 to gpulist
drm/msm/a6xx: use msm_gem for GMU memory objects
drm/msm: add internal MSM_BO_MAP_PRIV flag
drm/msm: add msm_gem_get_and_pin_iova_range
drm/msm: Check for powered down HW in the devfreq callbacks
drm/msm/dpu: update bandwidth threshold check
...
|
|
Pull drm fixes from Dave Airlie:
"These are the fixes from last week for the stuff merged in the merge
window. It got a bunch of nouveau fixes for HDA audio on some new
GPUs, some i915 and some amdpgu fixes.
i915:
- gvt: Fix one clang warning on debug only function
- Use ARRAY_SIZE for coccicheck warning
- Use after free fix for display global state.
- Whitelisting context-local timestamp on Gen9 and two scheduler
fixes with deps (Cc: stable)
- Removal of write flag from sysfs files where ineffective
nouveau:
- HDMI/DP audio HDA fixes
- display hang fix for Volta/Turing
- GK20A regression fix.
amdgpu:
- Prevent hwmon accesses while GPU is in reset
- CTF interrupt fix
- Backlight fix for renoir
- Fix for display sync groups
- Display bandwidth validation workaround"
* tag 'drm-next-2020-06-08' of git://anongit.freedesktop.org/drm/drm: (28 commits)
drm/nouveau/kms/nv50-: clear SW state of disabled windows harder
drm/nouveau: gr/gk20a: Use firmware version 0
drm/nouveau/disp/gm200-: detect and potentially disable HDA support on some SORs
drm/nouveau/disp/gp100: split SOR implementation from gm200
drm/nouveau/disp: modify OR allocation policy to account for HDA requirements
drm/nouveau/disp: split part of OR allocation logic into a function
drm/nouveau/disp: provide hint to OR allocation about HDA requirements
drm/amd/display: Revalidate bandwidth before commiting DC updates
drm/amdgpu/display: use blanked rather than plane state for sync groups
drm/i915/params: fix i915.fake_lmem_start module param sysfs permissions
drm/i915/params: don't expose inject_probe_failure in debugfs
drm/i915: Whitelist context-local timestamp in the gen9 cmdparser
drm/i915: Fix global state use-after-frees with a refcount
drm/i915: Check for awaits on still currently executing requests
drm/i915/gt: Do not schedule normal requests immediately along virtual
drm/i915: Reorder await_execution before await_request
drm/nouveau/kms/gt215-: fix race with audio driver runpm
drm/nouveau/disp/gm200-: fix NV_PDISP_SOR_HDMI2_CTRL(n) selection
Revert "drm/amd/display: disable dcn20 abm feature for bring up"
drm/amd/powerplay: ack the SMUToHost interrupt on receive V2
...
|
|
Merge still more updates from Andrew Morton:
"Various trees. Mainly those parts of MM whose linux-next dependents
are now merged. I'm still sitting on ~160 patches which await merges
from -next.
Subsystems affected by this patch series: mm/proc, ipc, dynamic-debug,
panic, lib, sysctl, mm/gup, mm/pagemap"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (52 commits)
doc: cgroup: update note about conditions when oom killer is invoked
module: move the set_fs hack for flush_icache_range to m68k
nommu: use flush_icache_user_range in brk and mmap
binfmt_flat: use flush_icache_user_range
exec: use flush_icache_user_range in read_code
exec: only build read_code when needed
m68k: implement flush_icache_user_range
arm: rename flush_cache_user_range to flush_icache_user_range
xtensa: implement flush_icache_user_range
sh: implement flush_icache_user_range
asm-generic: add a flush_icache_user_range stub
mm: rename flush_icache_user_range to flush_icache_user_page
arm,sparc,unicore32: remove flush_icache_user_range
riscv: use asm-generic/cacheflush.h
powerpc: use asm-generic/cacheflush.h
openrisc: use asm-generic/cacheflush.h
m68knommu: use asm-generic/cacheflush.h
microblaze: use asm-generic/cacheflush.h
ia64: use asm-generic/cacheflush.h
hexagon: use asm-generic/cacheflush.h
...
|
|
This seems to lead to some crazy include loops when using
asm-generic/cacheflush.h on more architectures, so leave it to the arch
header for now.
[hch@lst.de: fix warning]
Link: http://lkml.kernel.org/r/20200520173520.GA11199@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Will Deacon <will@kernel.org>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: http://lkml.kernel.org/r/20200515143646.3857579-7-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This code was using get_user_pages*(), in approximately a "Case 5"
scenario (accessing the data within a page), using the categorization
from [1]. That means that it's time to convert the get_user_pages*() +
put_page() calls to pin_user_pages*() + unpin_user_pages() calls.
There is some helpful background in [2]: basically, this is a small part
of fixing a long-standing disconnect between pinning pages, and file
systems' use of those pages.
[1] Documentation/core-api/pin_user_pages.rst
[2] "Explicit pinning of user-space pages":
https://lwn.net/Articles/807108/
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200529234309.484480-3-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In L3C uncore PMU drivers, bit16 is used to control all counters enable &
disable. Wrong value is given in the driver and its default value is 1'b1,
it can work because each PMU counter has its own control bits too.
Let's fix the wrong value.
Fixes: 2940bc433370 ("perf: hisi: Add support for HiSilicon SoC L3C PMU driver")
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1591350221-32275-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
No user pointers for sysctls anymore.
Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
Reported-by: build test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
As recently reported, some platforms provide a list of power
resources for device power state D3hot, through the _PR3 object,
but they do not provide a list of power resources for device power
state D0.
Among other things, this causes acpi_device_get_power() to return
D3hot as the current state of the device in question if all of the
D3hot power resources are "on", because it sees the power_resources
flag set and calls acpi_power_get_inferred_state() which finds that
D3hot is the shallowest power state with all of the associated power
resources turned "on", so that's what it returns. Moreover, that
value takes precedence over the acpi_dev_pm_explicit_get() return
value, because it means a deeper power state. The device may very
well be in D0 physically at that point, however.
Moreover, the presence of _PR3 without _PR0 for a given device
means that only one D3-level power state can be supported by it.
Namely, because there are no power resources to turn "off" when
transitioning the device from D0 into D3cold (which should be
supported since _PR3 is present), the evaluation of _PS3 should
be sufficient to put it straight into D3cold, but this means that
the effect of turning "on" the _PR3 power resources is unclear,
so it is better to avoid doing that altogether. Consequently,
there is no practical way do distinguish D3cold from D3hot for
the device in question and the power states of it can be labeled
so that D3hot is the deepest supported one (and Linux assumes
that putting a device into D3hot via ACPI may cause power to be
removed from it anyway, for legacy reasons).
To work around the problem described above modify the ACPI
enumeration of devices so that power resources are only used
for device power management if the list of D0 power resources
is not empty and make it mart D3cold as supported only if that
is the case and the D3hot list of power resources is not empty
too.
Fixes: ef85bdbec444 ("ACPI / scan: Consolidate extraction of power resources lists")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205057
Link: https://lore.kernel.org/linux-acpi/20200603194659.185757-1-hdegoede@redhat.com/
Reported-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: youling257@gmail.com
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
The reset member in i915_params was previously changed to unsigned, but
this failed to change the actual module parameter.
Fixes: aae970d8454b ("drm/i915: Mark i915.reset as unsigned")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200602151126.25626-1-jani.nikula@intel.com
(cherry picked from commit 34becfdb945a5eb819b7c8e4f0ec5cc5952ec68f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
If the execbuf is interrupted after building the cmdparser pipeline, and
before we commit to submitting the request to HW, we would attempt to
clean up the cmdparser early. While we held active references to the vma
being parsed and constructed, we did not hold an active reference for
the buffer pool itself. The result was that an interrupted execbuf could
still have run the cmdparser pipeline, but since the buffer pool was
idle, its target vma could have been recycled.
Note this problem only occurs if the cmdparser is running async due to
pipelined waits on busy fences, and the execbuf is interrupted.
Fixes: 686c7c35abc2 ("drm/i915/gem: Asynchronous cmdparser")
Fixes: 16e87459673a ("drm/i915/gt: Move the batch buffer pool from the engine to the gt")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200604103751.18816-1-chris@chris-wilson.co.uk
(cherry picked from commit 57a78ca4eceab1ecb0299fba8a10211289329889)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
rc is initialized to -ENIVAL but that's never used. Drop it.
Fixes: 5f1f79bbc9e2 ("virtio-mem: Paravirtualized memory hotplug")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
|
|
* new gpu support: a405, a640, a650
* dpu: color processing support
* mdp5: support for msm8x36 (the thing with a405)
* some prep work for per-context pagetables (ie the part that
does not depend on in-flight iommu patches)
* last but not least, UABI update for submit ioctl to support
syncobj (from Bas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGvLMubYPeKZ0rvOp45=+h4HZz-K9XNf0CXYcvPDVbnqLA@mail.gmail.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Includes gvt-next-fixes-2020-05-28
- Use after free fix for display global state.
- Whitelisting context-local timestamp on Gen9
and two scheduler fixes with deps (Cc: stable)
- Removal of write flag from sysfs files where
ineffective
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200604150454.GA59322@jlahtine-desk.ger.corp.intel.com
|
|
git://people.freedesktop.org/~agd5f/linux into drm-next
amd-drm-fixes-5.8-2020-06-04
amdgpu:
- Prevent hwmon accesses while GPU is in reset
- CTF interrupt fix
- Backlight fix for renoir
- Fix for display sync groups
- Display bandwidth validation workaround
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200604181900.4609-1-alexander.deucher@amd.com
|
|
Pull networking fixes from David Miller:
- Fix the build with certain Kconfig combinations for the Chelsio
inline TLS device, from Rohit Maheshwar and Vinay Kumar Yadavi.
- Fix leak in genetlink, from Cong Lang.
- Fix out of bounds packet header accesses in seg6, from Ahmed
Abdelsalam.
- Two XDP fixes in the ENA driver, from Sameeh Jubran
- Use rwsem in device rename instead of a seqcount because this code
can sleep, from Ahmed S. Darwish.
- Fix WoL regressions in r8169, from Heiner Kallweit.
- Fix qed crashes in kdump mode, from Alok Prasad.
- Fix the callbacks used for certain thermal zones in mlxsw, from Vadim
Pasternak.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
net: dsa: lantiq_gswip: fix and improve the unsupported interface error
mlxsw: core: Use different get_trend() callbacks for different thermal zones
net: dp83869: Reset return variable if PHY strap is read
rhashtable: Drop raw RCU deref in nested_table_free
cxgb4: Use kfree() instead kvfree() where appropriate
net: qed: fixes crash while running driver in kdump kernel
vsock/vmci: make vmci_vsock_transport_cb() static
net: ethtool: Fix comment mentioning typo in IS_ENABLED()
net: phy: mscc: fix Serdes configuration in vsc8584_config_init
net: mscc: Fix OF_MDIO config check
net: marvell: Fix OF_MDIO config check
net: dp83867: Fix OF_MDIO config check
net: dp83869: Fix OF_MDIO config check
net: ethernet: mvneta: fix MVNETA_SKB_HEADROOM alignment
ethtool: linkinfo: remove an unnecessary NULL check
net/xdp: use shift instead of 64 bit division
crypto/chtls:Fix compile error when CONFIG_IPV6 is disabled
inet_connection_sock: clear inet_num out of destroy helper
yam: fix possible memory leak in yam_init_driver
lan743x: Use correct MAC_CR configuration for 1 GBit speed
...
|
|
Pull sparc updates from David Miller:
- Rework the sparc32 page tables so that READ_ONCE(*pmd), as done by
generic code, operates on a word sized element. From Will Deacon.
- Some scnprintf() conversions, from Chen Zhou.
- A pin_user_pages() conversion from John Hubbard.
- Several 32-bit ptrace register handling fixes and such from Al Viro.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next:
fix a braino in "sparc32: fix register window handling in genregs32_[gs]et()"
sparc32: mm: Only call ctor()/dtor() functions for first and last user
sparc32: mm: Disable SPLIT_PTLOCK_CPUS
sparc32: mm: Don't try to free page-table pages if ctor() fails
sparc32: register memory occupied by kernel as memblock.memory
sparc: remove unused header file nfs_fs.h
sparc32: fix register window handling in genregs32_[gs]et()
sparc64: fix misuses of access_process_vm() in genregs32_[sg]et()
oradax: convert get_user_pages() --> pin_user_pages()
sparc: use scnprintf() in show_pciobppath_attr() in vio.c
sparc: use scnprintf() in show_pciobppath_attr() in pci.c
tty: vcc: Fix error return code in vcc_probe()
sparc32: mm: Reduce allocation size for PMD and PTE tables
sparc32: mm: Change pgtable_t type to pte_t * instead of struct page *
sparc32: mm: Restructure sparc32 MMU page-table layout
sparc32: mm: Fix argument checking in __srmmu_get_nocache()
sparc64: Replace zero-length array with flexible-array
sparc: mm: return true,false in kern_addr_valid()
|
|
|
|
While trying to use the lantiq_gswip driver on one of my boards I made
a mistake when specifying the phy-mode (because the out-of-tree driver
wants phy-mode "gmii" or "mii" for the internal PHYs). In this case the
following error is printed multiple times:
Unsupported interface: 3
While it gives at least a hint at what may be wrong it is not very user
friendly. Print the human readable phy-mode and also which port is
configured incorrectly (this hardware supports ports 0..6) to improve
the cases where someone made a mistake.
Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
- HDMI/DP audio HDA fixes
- display hang fix for Volta/Turing
- GK20A regression fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv4PW6tAZY6Uvrhi5OV+4rDXvrtNcoq2w_i35YajByj+ew@mail.gmail.com
|
|
The driver registers three different types of thermal zones: For the
ASIC itself, for port modules and for gearboxes.
Currently, all three types use the same get_trend() callback which does
not work correctly for the ASIC thermal zone. The callback assumes that
the device data is of type 'struct mlxsw_thermal_module', whereas for
the ASIC thermal zone 'struct mlxsw_thermal' is passed as device data.
Fix this by using one get_trend() callback for the ASIC thermal zone and
another for the other two types.
Fixes: 6f73862fabd9 ("mlxsw: core: Add the hottest thermal zone detection")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.8 kernel cycle.
It's just really boring this time. Zero core changes. Just linear
development, cleanups and misc noncritical fixes. Some new drivers for
very new Qualcomm and Intel chips.
New drivers:
- Intel Jasper Lake support.
- NXP Freescale i.MX8DXL support.
- Qualcomm SM8250 support.
- Renesas R8A7742 SH-PFC support.
Driver improvements:
- Severe cleanup and modernization of the MCP23s08 driver.
- Mediatek driver modularized.
- Setting config supported in the Meson driver.
- Wakeup support for the Broadcom BCM7211"
* tag 'pinctrl-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits)
pinctrl: sprd: Fix the incorrect pull-up definition
pinctrl: pxa: pxa2xx: Remove 'pxa2xx_pinctrl_exit()' which is unused and broken
pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'
pinctrl: freescale: imx: Fix an error handling path in 'imx_pinctrl_probe()'
pinctrl: sirf: add missing put_device() call in sirfsoc_gpio_probe()
pinctrl: imxl: Fix an error handling path in 'imx1_pinctrl_core_probe()'
pinctrl: bcm2835: Add support for wake-up interrupts
pinctrl: bcm2835: Match BCM7211 compatible string
dt-bindings: pinctrl: Document optional BCM7211 wake-up interrupts
dt-bindings: pinctrl: Document 7211 compatible for brcm, bcm2835-gpio.txt
dt-bindings: pinctrl: stm32: Add missing interrupts property
pinctrl: at91-pio4: Add COMPILE_TEST support
pinctrl: Fix return value about devm_platform_ioremap_resource()
MAINTAINERS: Renesas Pin Controllers are supported
dt-bindings: pinctrl: ocelot: Add Sparx5 SoC support
pinctrl: ocelot: Fix GPIO interrupt decoding on Jaguar2
pinctrl: ocelot: Remove instance number from pin functions
pinctrl: ocelot: Always register GPIO driver
dt-bindings: pinctrl: rockchip: update example
pinctrl: amd: Add ACPI dependency
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Not much this cycle apart from the ingenic rtc driver rework.
The fixes are mainly minor issues reported by coccinelle rather than
real world issues.
Subsystem:
- new VL flag for backup switch over
Drivers:
- ingenic: only support device tree
- pcf2127: report battery switch over, handle nowayout"
* tag 'rtc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (29 commits)
rtc: pcf2127: watchdog: handle nowayout feature
rtc: fsl-ftm-alarm: fix freeze(s2idle) failed to wake
rtc: abx80x: Provide debug feedback for invalid dt properties
rtc: abx80x: Add Device Tree matching table
rtc: rv3028: Add missed check for devm_regmap_init_i2c()
rtc: mpc5121: Use correct return value for mpc5121_rtc_probe()
rtc: goldfish: Use correct return value for goldfish_rtc_probe()
rtc: snvs: Add necessary clock operations for RTC APIs
rtc: snvs: Make SNVS clock always prepared
rtc: ingenic: Reset regulator register in probe
rtc: ingenic: Fix masking of error code
rtc: ingenic: Remove unused fields from private structure
rtc: ingenic: Set wakeup params in probe
rtc: ingenic: Enable clock in probe
rtc: ingenic: Use local 'dev' variable in probe
rtc: ingenic: Only support probing from devicetree
rtc: mc13xxx: fix a double-unlock issue
rtc: stmp3xxx: update contact email
rtc: max77686: Use single-byte writes on MAX77620
rtc: pcf2127: report battery switch over
...
|
|
Pull NTB updates from Jon Mason:
"Intel Icelake NTB support, Intel driver bug fixes, and lots of bug
fixes for ntb tests"
* tag 'ntb-5.8' of git://github.com/jonmason/ntb:
NTB: ntb_test: Fix bug when counting remote files
NTB: perf: Fix race condition when run with ntb_test
NTB: perf: Fix support for hardware that doesn't have port numbers
NTB: perf: Don't require one more memory window than number of peers
NTB: ntb_pingpong: Choose doorbells based on port number
NTB: Fix the default port and peer numbers for legacy drivers
NTB: Revert the change to use the NTB device dev for DMA allocations
NTB: ntb_tool: reading the link file should not end in a NULL byte
ntb_perf: avoid false dma unmap of destination address
ntb_perf: increase sleep time from one milli sec to one sec
ntb_tool: pass correct struct device to dma_alloc_coherent
ntb_perf: pass correct struct device to dma_alloc_coherent
ntb: hw: remove the code that sets the DMA mask
NTB: correct ntb_peer_spad_addr and ntb_peer_spad_read comment typos
ntb: intel: fix static declaration
ntb: intel: add hw workaround for NTB BAR alignment
ntb: intel: Add Icelake (gen4) support for Intel NTB
NTB: Fix static check warning in perf_clear_test
include/ntb: Fix typo in ntb_unregister_device description
|
|
IPC MU has no power domain assigned and there could be IPC during
noirq suspend phase, so IRQF_NO_SUSPEND flag is needed for IPC MU.
However, for other MUs, they have power domain assigned and their
power will be turned off during noirq suspend phase, but with
IRQF_NO_SUSPEND set, their interrupts are NOT disabled even after
their power turned off, it will cause system crash when mailbox
driver trys to handle pending interrupts but the MU power is already
turned off.
So, IRQF_NO_SUSPEND flag should ONLY be added to IPC MU which has
power domain managed by SCU, then all other MUs' pending interrupts
after noirq suspend phase will be handled after system resume.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Some of i.MX8M SoCs have MU clock, they need to be managed in runtime
to make sure the MU clock can be off in runtime, add runtime PM callback
to handle MU clock.
And on i.MX8MP, the MU clock is combined with power domain and runtime
PM is enabled for the clock driver, during noirq suspend/resume phase,
runtime PM is disabled by device suspend, but the MU context save/restore
needs to enable MU clock for register access, calling clock prepare/enable
will trigger runtime resume failure and lead to system suspend failed.
Actually, the MU context save/restore is ONLY necessary for SCU IPC MU,
other MUs especially on i.MX8MP platforms which have MU clock assigned,
they need to runtime request/free mailbox channel in the consumer driver,
so no need to save/restore MU context for them, hence it can avoid this
issue, so the MU context save/restore is ONLY applied to i.MX platforms
MU instance without clock present.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
For "mem" mode suspend on i.MX8 SoCs, MU settings could be
lost because its power is off, so save/restore is needed
for MU settings during suspend/resume. However, the restore
can ONLY be done when MU settings are actually lost, for the
scenario of settings NOT lost in "freeze" mode suspend, since
there could be still IPC going on multiple CPUs, restoring the
MU settings could overwrite the TIE by mistake and cause system
freeze, so need to make sure ONLY restore the MU settings when
it is powered off, Anson fixes this by checking whether restore
is actually needed when resume.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues"
* tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits)
habanalabs: correctly cast u64 to void*
habanalabs: initialize variable to default value
extcon: arizona: Fix runtime PM imbalance on error
extcon: max14577: Add proper dt-compatible strings
extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
extcon: remove redundant assignment to variable idx
w1: omap-hdq: print dev_err if irq flags are not cleared
w1: omap-hdq: fix interrupt handling which did show spurious timeouts
w1: omap-hdq: fix return value to be -1 if there is a timeout
w1: omap-hdq: cleanup to add missing newline for some dev_dbg
/dev/mem: Revoke mappings when a driver claims the region
misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages()
misc: xilinx-sdfec: cleanup return value in xsdfec_table_write()
misc: xilinx-sdfec: improve get_user_pages_fast() error handling
nvmem: qfprom: remove incorrect write support
habanalabs: handle MMU cache invalidation timeout
habanalabs: don't allow hard reset with open processes
habanalabs: GAUDI does not support soft-reset
habanalabs: add print for soft reset due to event
habanalabs: improve MMU cache invalidation code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core patches for 5.8-rc1.
Not all that huge this release, just a number of small fixes and
updates:
- software node fixes
- kobject now sends KOBJ_REMOVE when it is removed from sysfs, not
when it is removed from memory (which could come much later)
- device link additions and fixes based on testing on more devices
- firmware core cleanups
- other minor changes, full details in the shortlog
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (23 commits)
driver core: Update device link status correctly for SYNC_STATE_ONLY links
firmware_loader: change enum fw_opt to u32
software node: implement software_node_unregister()
kobject: send KOBJ_REMOVE uevent when the object is removed from sysfs
driver core: Remove unnecessary is_fwnode_dev variable in device_add()
drivers property: When no children in primary, try secondary
driver core: platform: Fix spelling errors in platform.c
driver core: Remove check in driver_deferred_probe_force_trigger()
of: platform: Batch fwnode parsing when adding all top level devices
driver core: fw_devlink: Add support for batching fwnode parsing
driver core: Look for waiting consumers only for a fwnode's primary device
driver core: Move code to the right part of the file
Revert "Revert "driver core: Set fw_devlink to "permissive" behavior by default""
drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish
firmware_loader: move fw_fallback_config to a private kernel symbol namespace
driver core: Add missing '\n' in log messages
driver/base/soc: Use kobj_to_dev() API
Add documentation on meaning of -EPROBE_DEFER
driver core: platform: remove redundant assignment to variable ret
debugfs: Use the correct style for SPDX License Identifier
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver updates from Greg KH:
"Here is the large set of staging and IIO driver changes for 5.8-rc1
Nothing major, but a lot of new IIO drivers are included in here,
along with other core iio cleanups and changes.
On the staging driver front, again, nothing noticable. No new
deletions or additions, just a ton of tiny cleanups all over the tree
done by a lot of different people. Most coding style, but many actual
real fixes and cleanups that are nice to see.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (618 commits)
staging: rtl8723bs: Use common packet header constants
staging: sm750fb: Add names to proc_setBLANK args
staging: most: usb: init return value in default path of switch/case expression
staging: vchiq: Get rid of VCHIQ_SERVICE_OPENEND callback reason
staging: vchiq: move vchiq_release_message() into vchiq
staging: vchi: Get rid of C++ guards
staging: vchi: Get rid of not implemented function declarations
staging: vchi: Get rid of vchiq_status_to_vchi()
staging: vchi: Get rid of vchi_service_set_option()
staging: vchi: Merge vchi_msg_queue() into vchi_queue_kernel_message()
staging: vchiq: Move copy callback handling into vchiq
staging: vchi: Get rid of vchi_queue_user_message()
staging: vchi: Get rid of vchi_service_destroy()
staging: most: usb: use function sysfs_streq
staging: most: usb: add missing put_device calls
staging: most: usb: use correct error codes
staging: most: usb: replace code to calculate array index
staging: most: usb: don't use error path to exit function on success
staging: most: usb: move allocation of URB out of critical section
staging: most: usb: return 0 instead of variable
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the tty and serial driver updates for 5.8-rc1
Nothing huge at all, just a lot of little serial driver fixes, updates
for new devices and features, and other small things. Full details are
in the shortlog.
All of these have been in linux-next with no issues for a while"
* tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (67 commits)
tty: serial: qcom_geni_serial: Add 51.2MHz frequency support
tty: serial: imx: clear Ageing Timer Interrupt in handler
serial: 8250_fintek: Add F81966 Support
sc16is7xx: Add flag to activate IrDA mode
dt-bindings: sc16is7xx: Add flag to activate IrDA mode
serial: 8250: Support rs485 bus termination GPIO
serial: 8520_port: Fix function param documentation
dt-bindings: serial: Add binding for rs485 bus termination GPIO
vt: keyboard: avoid signed integer overflow in k_ascii
serial: 8250: Enable 16550A variants by default on non-x86
tty: hvc_console, fix crashes on parallel open/close
serial: imx: Initialize lock for non-registered console
sc16is7xx: Read the LSR register for basic device presence check
sc16is7xx: Allow sharing the IRQ line
sc16is7xx: Use threaded IRQ
sc16is7xx: Always use falling edge IRQ
tty: n_gsm: Fix bogus i++ in gsm_data_kick
tty: n_gsm: Remove unnecessary test in gsm_print_packet()
serial: stm32: add no_console_suspend support
tty: serial: fsl_lpuart: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY driver updates from Greg KH:
"Here are the large set of USB and PHY driver updates for 5.8-rc1.
Nothing huge, just lots of little things:
- USB gadget fixes and additions all over the place
- new PHY drivers
- PHY driver fixes and updates
- XHCI driver updates
- musb driver updates
- more USB-serial driver ids added
- various USB quirks added
- thunderbolt minor updates and fixes
- typec updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits)
usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs
usb: dwc3: meson-g12a: fix error path when fetching the reset line fails
Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings"
Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180"
Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver"
USB: serial: ch341: fix lockup of devices with limited prescaler
USB: serial: ch341: add basis for quirk detection
CDC-ACM: heed quirk also in error handling
USB: serial: option: add Telit LE910C1-EUX compositions
usb: musb: Fix runtime PM imbalance on error
usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set
usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle
usb: musb: use true for 'use_dma'
usb: musb: start session in resume for host port
usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
USB: serial: qcserial: add DW5816e QDL support
thunderbolt: Add trivial .shutdown
usb: dwc3: keystone: Turn on USB3 PHY before controller
dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
dt-bindings: usb: convert keystone-usb.txt to YAML
...
|
|
When the PHY's strap register is read to determine if lane swapping is
needed the phy_read_mmd returns the value back into the ret variable.
If the call to read the strap fails the failed value is returned. If
the call to read the strap is successful then ret is possibly set to a
non-zero positive number. Without reseting the ret value to 0 this will
cause the parse DT function to return a failure.
Fixes: c4566aec6e808 ("net: phy: dp83869: Update port-mirroring to read straps")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull arch/sh updates from Rich Felker:
"Fix for arch/sh build regression with newer binutils, removal of SH5,
fixes for module exports, and misc cleanup"
* tag 'sh-for-5.8' of git://git.libc.org/linux-sh:
sh: remove sh5 support
sh: add missing EXPORT_SYMBOL() for __delay
sh: Convert ins[bwl]/outs[bwl] macros to inline functions
sh: Convert iounmap() macros to inline functions
sh: Add missing DECLARE_EXPORT() for __ashiftrt_r4_xx
sh: configs: Cleanup old Kconfig IO scheduler options
arch/sh: vmlinux.scr
sh: Replace CONFIG_MTD_M25P80 with CONFIG_MTD_SPI_NOR in sh7757lcr_defconfig
sh: sh4a: Bring back tmu3_device early device
|
|
This commit implements config interrupt support
in IFC VF
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/1591352835-22441-6-git-send-email-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This commit replaces -1 with VHOST_FILE_UNBIND in ioctls since
we have added such a macro in the uapi header for vdpa_host.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/1591352835-22441-5-git-send-email-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This commit implements config interrupt support in
vhost_vdpa layer.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/1591352835-22441-4-git-send-email-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
User space may try to set status of same value multiple times,
this patch handles this case more efficiently by ignoring the
setting of the same status value.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/1591352835-22441-3-git-send-email-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Pull dma-mapping updates from Christoph Hellwig:
- enhance the dma pool to allow atomic allocation on x86 with AMD SEV
(David Rientjes)
- two small cleanups (Jason Yan and Peter Collingbourne)
* tag 'dma-mapping-5.8' of git://git.infradead.org/users/hch/dma-mapping:
dma-contiguous: fix comment for dma_release_from_contiguous
dma-pool: scale the default DMA coherent pool size with memory capacity
x86/mm: unencrypted non-blocking DMA allocations use coherent pools
dma-pool: add pool sizes to debugfs
dma-direct: atomic allocations must come from atomic coherent pools
dma-pool: dynamically expanding atomic pools
dma-pool: add additional coherent pools to map to gfp mask
dma-remap: separate DMA atomic pools from direct remap code
dma-debug: make __dma_entry_alloc_check_leak() static
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull dmi update from Jean Delvare.
* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
firmware/dmi: Report DMI Bios & EC firmware release
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Program MPS for RCiEP devices (Ashok Raj)
- Fix pci_register_host_bridge() device_register() error handling
(Rob Herring)
- Fix pci_host_bridge struct device release/free handling (Rob
Herring)
Resource management:
- Allow resizing BARs for devices on root bus (Ard Biesheuvel)
Power management:
- Reduce Thunderbolt resume time by working around devices that don't
support DLL Link Active reporting (Mika Westerberg)
- Work around a Pericom USB controller OHCI/EHCI PME# defect
(Kai-Heng Feng)
Virtualization:
- Add ACS quirk for Intel Root Complex Integrated Endpoints (Ashok
Raj)
- Avoid FLR for AMD Starship USB 3.0 (Kevin Buettner)
- Avoid FLR for AMD Matisse HD Audio & USB 3.0 (Marcos Scriven)
Error handling:
- Use only _OSC (not HEST FIRMWARE_FIRST) to determine AER ownership
(Alexandru Gagniuc, Kuppuswamy Sathyanarayanan)
- Reduce verbosity by logging only ACPI_NOTIFY_DISCONNECT_RECOVER
events (Kuppuswamy Sathyanarayanan)
- Don't enable AER by default in Kconfig (Bjorn Helgaas)
Peer-to-peer DMA:
- Add AMD Zen Raven and Renoir Root Ports to whitelist (Alex Deucher)
ASPM:
- Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges (Kai-Heng Feng)
Endpoint framework:
- Fix DMA channel release in test (Kunihiko Hayashi)
- Add page size as argument to pci_epc_mem_init() (Lad Prabhakar)
- Add support to handle multiple base for mapping outbound memory
(Lad Prabhakar)
Generic host bridge driver:
- Support building as module (Rob Herring)
- Eliminate pci_host_common_probe wrappers (Rob Herring)
Amlogic Meson PCIe controller driver:
- Don't use FAST_LINK_MODE to set up link (Marc Zyngier)
Broadcom STB PCIe controller driver:
- Disable ASPM L0s if 'aspm-no-l0s' in DT (Jim Quinlan)
- Fix clk_put() error (Jim Quinlan)
- Fix window register offset (Jim Quinlan)
- Assert fundamental reset on initialization (Nicolas Saenz Julienne)
- Add notify xHCI reset property (Nicolas Saenz Julienne)
- Add init routine for Raspberry Pi 4 VL805 USB controller (Nicolas
Saenz Julienne)
- Sync with Raspberry Pi 4 firmware for VL805 initialization (Nicolas
Saenz Julienne)
Cadence PCIe controller driver:
- Remove "cdns,max-outbound-regions" DT property (replaced by
"ranges") (Kishon Vijay Abraham I)
- Read 32-bit (not 16-bit) Vendor ID/Device ID property from DT
(Kishon Vijay Abraham I)
Marvell Aardvark PCIe controller driver:
- Improve link training (Marek Behún)
- Add PHY support (Marek Behún)
- Add "phys", "max-link-speed", "reset-gpios" to dt-binding (Marek
Behún)
- Train link immediately after enabling training to work around
detection issues with some cards (Pali Rohár)
- Issue PERST via GPIO to work around detection issues (Pali Rohár)
- Don't blindly enable ASPM L0s (Pali Rohár)
- Replace custom macros by standard linux/pci_regs.h macros (Pali
Rohár)
Microsoft Hyper-V host bridge driver:
- Fix probe failure path to release resource (Wei Hu)
- Retry PCI bus D0 entry on invalid device state for kdump (Wei Hu)
Renesas R-Car PCIe controller driver:
- Fix incorrect programming of OB windows (Andrew Murray)
- Add suspend/resume (Kazufumi Ikeda)
- Rename pcie-rcar.c to pcie-rcar-host.c (Lad Prabhakar)
- Add endpoint controller driver (Lad Prabhakar)
- Fix PCIEPAMR mask calculation (Lad Prabhakar)
- Add r8a77961 to DT binding (Yoshihiro Shimoda)
Socionext UniPhier Pro5 controller driver:
- Add endpoint controller driver (Kunihiko Hayashi)
Synopsys DesignWare PCIe controller driver:
- Program outbound ATU upper limit register (Alan Mikhak)
- Fix inner MSI IRQ domain registration (Marc Zyngier)
Miscellaneous:
- Check for platform_get_irq() failure consistently (negative return
means failure) (Aman Sharma)
- Fix several runtime PM get/put imbalances (Dinghao Liu)
- Use flexible-array and struct_size() helpers for code cleanup
(Gustavo A. R. Silva)
- Update & fix issues in bridge emulation of PCIe registers (Jon
Derrick)
- Add macros for bridge window names (PCI_BRIDGE_IO_WINDOW, etc)
(Krzysztof Wilczyński)
- Work around Intel PCH MROMs that have invalid BARs (Xiaochun Lee)"
* tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits)
PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver
PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints
PCI/DPC: Print IRQ number used by port
PCI/AER: Use "aer" variable for capability offset
PCI/AER: Remove redundant dev->aer_cap checks
PCI/AER: Remove redundant pci_is_pcie() checks
PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership
PCI: tegra: Fix runtime PM imbalance on error
PCI: vmd: Filter resource type bits from shadow register
PCI: tegra194: Fix runtime PM imbalance on error
dt-bindings: PCI: Add UniPhier PCIe endpoint controller description
PCI: hv: Use struct_size() helper
PCI: Rename _DSM constants to align with spec
PCI: Avoid FLR for AMD Starship USB 3.0
PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0
x86/PCI: Drop unused xen_register_pirq() gsi_override parameter
PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port
PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link
PCI: dwc: Fix inner MSI IRQ domain registration
PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname()
...
|
|
Prepare input updates for 5.8 merge window.
|
|
Some vendors like HPe or Dell, encode the release version of their BIOS
in the "System BIOS {Major|Minor} Release" fields of Type 0.
This information is used to know which bios release actually runs.
It could be used for some quirks, debugging sessions or inventory tasks.
A typical output for a Dell system running the 65.27 bios is :
[root@t1700 ~]# cat /sys/devices/virtual/dmi/id/bios_release
65.27
[root@t1700 ~]#
Servers that have a BMC encode the release version of their firmware in the
"Embedded Controller Firmware {Major|Minor} Release" fields of Type 0.
This information is used to know which BMC release actually runs.
It could be used for some quirks, debugging sessions or inventory tasks.
A typical output for a Dell system running the 3.75 bmc release is :
[root@t1700 ~]# cat /sys/devices/virtual/dmi/id/ec_firmware_release
3.75
[root@t1700 ~]#
Signed-off-by: Erwan Velu <e.velu@criteo.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
|
|
When running ntb_test, the script tries to run the ntb_perf test
immediately after probing the modules. Since adding multi-port support,
this fails seeing the new initialization procedure in ntb_perf
can not complete instantly.
To fix this we add a completion which is waited on when a test is
started. In this way, run can be written any time after the module is
loaded and it will wait for the initialization to complete instead of
sending an error.
Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Tested-by: Alexander Fomichev <fomichev.ru@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
