summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-05-20sh_eth: fix typo in comment to BCULR writeSergei Shtylyov
Simon has noticed a typo in the comment accompaining the BCULR write -- fix it and move the comment before the write (following the style of the other comments), while at it... Reported-by: Simon Horman <horms@verge.net.au> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20sh_eth: fix comment grammar in 'struct sh_eth_cpu_data'Sergei Shtylyov
All the verbs in the comments to the 'struct sh_eth_cpu_data' declaration should be in a 3rd person singular, to match the nouns. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20sh_eth: fix typo in EESR.TRO bit nameSergei Shtylyov
The correct name of the EESR bit 8 is TRO (transmit retry over), not RTO. Note that EESIPR bit 8, TROIP remained correct... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20net: hns3: Fix for CMDQ and Misc. interrupt init order problemYunsheng Lin
When vf module is loading, the cmd queue initialization should happen before misc interrupt initialization, otherwise the misc interrupt handle will cause using uninitialized cmd queue problem. There is also the same issue when vf module is unloading. This patch fixes it by adjusting the location of some function. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20net: hns3: Fixes kernel panic issue during rmmod hns3 driverXi Wang
If CONFIG_ARM_SMMU_V3 is enabled, arm64's dma_ops will replace arm64_swiotlb_dma_ops with iommu_dma_ops. When releasing contiguous dma memory, the new ops will call the vunmap function which cannot be run in interrupt context. Currently, spin_lock_bh is called before vunmap is executed. This disables BH and causes the interrupt context to be detected to generate a kernel panic like below: [ 2831.573400] kernel BUG at mm/vmalloc.c:1621! [ 2831.577659] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ... [ 2831.699907] Process rmmod (pid: 1893, stack limit = 0x0000000055103ee2) [ 2831.706507] Call trace: [ 2831.708941] vunmap+0x48/0x50 [ 2831.711897] dma_common_free_remap+0x78/0x88 [ 2831.716155] __iommu_free_attrs+0xa8/0x1c0 [ 2831.720255] hclge_free_cmd_desc+0xc8/0x118 [hclge] [ 2831.725128] hclge_destroy_cmd_queue+0x34/0x68 [hclge] [ 2831.730261] hclge_uninit_ae_dev+0x90/0x100 [hclge] [ 2831.735127] hnae3_unregister_ae_dev+0xb0/0x868 [hnae3] [ 2831.740345] hns3_remove+0x3c/0x90 [hns3] [ 2831.744344] pci_device_remove+0x48/0x108 [ 2831.748342] device_release_driver_internal+0x164/0x200 [ 2831.753553] driver_detach+0x4c/0x88 [ 2831.757116] bus_remove_driver+0x60/0xc0 [ 2831.761026] driver_unregister+0x34/0x60 [ 2831.764935] pci_unregister_driver+0x30/0xb0 [ 2831.769197] hns3_exit_module+0x10/0x978 [hns3] [ 2831.773715] SyS_delete_module+0x1f8/0x248 [ 2831.777799] el0_svc_naked+0x30/0x34 This patch fixes it by using spin_lock instead of spin_lock_bh. Fixes: 68c0a5c70614 ("net: hns3: Add HNS3 IMP(Integrated Mgmt Proc) Cmd Interface Support") Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20net: hns3: Fix for netdev not running problem after calling net_stop and ↵Fuyun Liang
net_open The link status update function is called by timer every second. But net_stop and net_open may be called with very short intervals. The link status update function can not detect the link state has changed. It causes the netdev not running problem. This patch fixes it by updating the link state in ae_stop function. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20net: hns3: Use enums instead of magic number in hclge_is_special_opcodeHuazhong Tan
This patch does bit of a clean-up by using already defined enums for certain values in function hclge_is_special_opcode(). Below enums from have been used as replacements for magic values: enum hclge_opcode_type{ <snip> HCLGE_OPC_STATS_64_BIT = 0x0030, HCLGE_OPC_STATS_32_BIT = 0x0031, HCLGE_OPC_STATS_MAC = 0x0032, <snip> }; Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20net: hns3: Fix for hns3 module is loaded multiple times problemXi Wang
If the hns3 driver has been built into kernel and then loaded with the same driver which built as KLM, it may trigger an error like below: [ 20.009555] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 20.016789] hns3: Copyright (c) 2017 Huawei Corporation. [ 20.022100] Error: Driver 'hns3' is already registered, aborting... [ 23.517397] Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... [ 23.691583] Process insmod (pid: 1982, stack limit = 0x00000000cd5f21cb) [ 23.698270] Call trace: [ 23.700705] __list_del_entry_valid+0x2c/0xd8 [ 23.705049] hnae3_unregister_client+0x68/0xa8 [ 23.709487] hns3_init_module+0x98/0x1000 [hns3] [ 23.714093] do_one_initcall+0x5c/0x170 [ 23.717918] do_init_module+0x64/0x1f4 [ 23.721654] load_module+0x1d14/0x24b0 [ 23.725390] SyS_init_module+0x158/0x208 [ 23.729300] el0_svc_naked+0x30/0x34 This patch fixes it by adding module version info. Fixes: 38caee9d3ee8 ("net: hns3: Add support of the HNAE3 framework") Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20net: hns3: Fix the missing client list node initializationXi Wang
This patch fixes the missing initialization of the client list node in the hnae3_register_client() function. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20net: hns3: cleanup of return values in hclge_init_client_instance()Jian Shen
Removes the goto and directly returns in case of errors as part of the cleanup. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20net: hns3: Fixes API to fetch ethernet header length with kernel defaultPeng Li
During the RX leg driver needs to fetch the ethernet header length from the RX'ed Buffer Descriptor. Currently, proprietary version hns3_nic_get_headlen is being used to fetch the header length which uses l234info present in the Buffer Descriptor which might not be valid for the first Buffer Descriptor if the packet is spanning across multiple descriptors. Kernel default eth_get_headlen API does the job correctly. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Peng Li <lipeng321@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20net: hns3: Fixes error reported by Kbuild and internal reviewSalil Mehta
This patch fixes the error reported by Intel's kbuild and fixes a return value in one of the legs, caught during review of the original patch sent by kbuild. Fixes: fdb793670a00 ("net: hns3: Add support of .sriov_configure in HNS3 driver") Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20r8169: fix network error on resume from suspendHeiner Kallweit
This commit removed calls to rtl_set_rx_mode(). This is ok for the standard path if the link is brought up, however it breaks system resume from suspend. Link comes up but no network traffic. Meanwhile common code from rtl_hw_start_8169/8101/8168() was moved to rtl_hw_start(), therefore re-add the call to rtl_set_rx_mode() there. Due to adding this call we have to move definition of rtl_hw_start() after definition of rtl_set_rx_mode(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Fixes: 82d3ff6dd199 ("r8169: remove calls to rtl_set_rx_mode") Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2018-05-18 Here's the first bluetooth-next pull request for the 4.18 kernel: - Refactoring of the btbcm driver - New USB IDs for QCA_ROME and LiteOn controllers - Buffer overflow fix if the controller sends invalid advertising data length - Various cleanups & fixes for Qualcomm controllers Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20Revert "ixgbe: release lock for the duration of ixgbe_suspend_close()"Jeff Kirsher
This reverts commit 6710f970d9979d8f03f6e292bb729b2ee1526d0e. Gotta love when developers have offline discussions, thinking everyone is reading their responses/dialog. The change had the potential for a number of race conditions on shutdown, which is why we are reverting the change. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20net: qcom/emac: Allocate buffers from local nodeHemanth Puranik
Currently we use non-NUMA aware allocation for TPD and RRD buffers, this patch modifies to use NUMA friendly allocation. Signed-off-by: Hemanth Puranik <hpuranik@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-19sh_eth: add R8A77980 supportSergei Shtylyov
Finally, add support for the DT probing of the R-Car V3H (AKA R8A77980) -- it's the only R-Car gen3 SoC having the GEther controller -- others have only EtherAVB... Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-19sh_eth: add EDMR.NBST supportSergei Shtylyov
The R-Car V3H (AKA R8A77980) GEther controller adds the DMA burst mode bit (NBST) in EDMR and the manual tells to always set it before doing any DMA. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-19sh_eth: add RGMII supportSergei Shtylyov
The R-Car V3H (AKA R8A77980) GEther controller adds support for the RGMII PHY interface mode as a new value for the RMII_MII register. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-19net: mvpp2: Add missing VLAN tag detectionMaxime Chevallier
Marvell PPv2 Header Parser sets some bits in the 'result_info' field in each lookup iteration, to identify different packet attributes such as DSA / VLAN tag, protocol infos, etc. This is used in further classification stages in the controller. It's the DSA tag detection entry that is in charge of detecting when there is a single VLAN tag. This commits adds the missing update of the result_info in this case. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-19mlxsw: use devlink helper to generate physical port nameJiri Pirko
Since devlink knows the info needed to generate the physical port name in a generic way for all devlink users, use the helper to do the job. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-19devlink: extend attrs_set for setting port flavoursJiri Pirko
Devlink ports can have specific flavour according to the purpose of use. This patch extend attrs_set so the driver can say which flavour port has. Initial flavours are: physical, cpu, dsa User can query this to see right away what is the purpose of each port. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-19devlink: introduce devlink_port_attrs_setJiri Pirko
Change existing setter for split port information into more generic attrs setter. Alongside with that, allow to set port number and subport number for split ports. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net: stmmac: Populate missing callbacks in HWIF initializationJose Abreu
Some HW specific setups, like sun8i, do not populate all the necessary callbacks, which is what HWIF helpers were expecting. Fix this by always trying to get the generic helpers and populate them if they were not previously populated by HW specific setup. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Fixes: 5f0456b43140 ("net: stmmac: Implement logic to automatically select HW Interface") Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Cc: Corentin Labbe <clabbe.montjoie@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18cxgb4: collect SGE PF/VF queue mapRahul Lakkireddy
For T6, collect info on queue mapping to corresponding PF/VF in SGE. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net: mvpp2: typo and cosmetic fixesAntoine Tenart
This patch on the Marvell PPv2 driver is only cosmetic. Two typos are removed as well as other cosmetic fixes, such as extra new lines or tabs vs spaces. Suggested-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18hippi: fix spelling mistake: "Framming" -> "Framing"Colin Ian King
Trivial fix to spelling mistake in printk message text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18Merge tag 'mlx5e-updates-2018-05-17' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5e-updates-2018-05-17 From: Or Gerlitz <ogerlitz@mellanox.com> This series addresses a regression introduced by the shared block TC changes [1]. Currently, for VF->VF and uplink->VF rules, the TC core (cls_api) attempts to offload the same flow multiple times into the driver, as a side effect of the mlx5 registration to the egdev callback. We use the flow cookie to ignore attempts to add such flows, we can't reject them (return error), b/c this will fail the offload attempt, so we ignore that. The last patch of the series deals with exposing HW stats counters through ethtool for the vport reps. Dave - the regression that we are addressing was introduced in 4.15 [1] and applies to nfp and mlx5. Jiri suggested to push driver side fixes to net-next, this is already done for nfp [2][3]. Once this is upstream, we will submit a small/point single patch fix for the TC core code which can serve for net and stable, but not carried into net-next, b/c it might limit some future use-cases. [1] 208c0f4b5237 "net: sched: use tc_setup_cb_call to call per-block callbacks" [2] c50647d "nfp: flower: ignore duplicate cb requests for same rule" [3] 54a4a03 "nfp: flower: support offloading multiple rules with same cookie" ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18Merge tag 'mlx5-updates-2018-05-17' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Saeed Mahameed says: ==================== mlx5-updates-2018-05-17 mlx5 core dirver updates for both net-next and rdma-next branches. From Christophe JAILLET, first three patche to use kvfree where needed. From: Or Gerlitz <ogerlitz@mellanox.com> Next six patches from Roi and Co adds support for merged sriov e-switch which comes to serve cases where both PFs, VFs set on them and both uplinks are to be used in single v-switch SW model. When merged e-switch is supported, the per-port e-switch is logically merged into one e-switch that spans both physical ports and all the VFs. This model allows to offload TC eswitch rules between VFs belonging to different PFs (and hence have different eswitch affinity), it also sets the some of the foundations needed for uplink LAG support. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net: mscc: Add SPDX identifierAlexandre Belloni
ocelot_qsys.h is missing the SPDX identfier, fix that. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Allan W. Nielsen <allan.nielsen@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net: stmmac: Remove if condition by taking advantage of hwif return codeJose Abreu
We can remove the if condition and check if return code is different than -EINVAL, meaning callback is present. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net: stmmac: Let descriptor code get skbuff addressJose Abreu
Stop using if conditions depending on the GMAC version for getting the descriptor skbuff address and use instead a helper implemented in the descriptor files. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net: stmmac: Uniformize set_rx_owner()Jose Abreu
Currently an if condition is used to select the correct callback to set rx_onwer in descriptor. Lets keep this simple and always use the same callback. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net: stmmac: Remove uneeded check for GMAC version in stmmac_xmitJose Abreu
We either have .enable_dma_transmission or .set_tx_tail_ptr in the HW table callbacks, we can never have both so there is no need to check for GMAC version. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net: stmmac: Uniformize the use of dma_init_* callbacksJose Abreu
Instead of relying on the GMAC version for choosing if we need to use dma_init or dma_init_{rx/tx}_chan callback, lets uniformize this and always use the dma_init_{rx/tx}_chan callbacks. While at it, fix the use of dma_init_chan callback, which shall be called for as many channels as the max of rx/tx channels. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net: stmmac: Move PTP and MMC base address calculation to hwif.cJose Abreu
PTP and MMC modules base address can depend on the GMAC version. As this is HW specific lets move this base address calculation to hwif.c. Also, add an entry in the HW table so that we can specify the module offset. This can later be extended to more modules, if deemed necessary. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net: stmmac: Remove uneeded checks for GMAC versionJose Abreu
With the introducion of callbacks check in hwif.h we only call the callback if HW supports it so there is no longer need to check for GMAC version. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net: stmmac: Uniformize the use of dma_{rx/tx}_mode callbacksJose Abreu
Instead of relying on the GMAC version for choosing if we need to use dma_{rx/tx}_mode or just dma_mode callback lets uniformize this and always use the dma_{rx/tx}_mode callbacks. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net: stmmac: Let descriptor code clear the descriptorJose Abreu
Stop using if conditions depending on the GMAC version for clearing the descriptor and use instead a helper implemented in the descriptor files. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net: stmmac: Let descriptor code set skbuff addressJose Abreu
Stop using if conditions depending on the GMAC version for setting the the descriptor skbuff address and use instead a helper implemented in the descriptor files. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net: stmmac: Do not keep rearming the coalesce timer in stmmac_xmitJose Abreu
This is cutting down performance. Once the timer is armed it should run after the time expires for the first packet sent and not the last one. After this change, running iperf, the performance gain is +/- 24%. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net: stmmac: Enable OSP for GMAC4Jose Abreu
This enables OSP (Operate on Second Packet) for GMAC4. The feature allows DMA to fetch second descriptor while its still processing the first one. Running iperf, the performance gain is +/- 38%. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18Bluetooth: Add a new 13d3:3496 QCA_ROME deviceJoão Paulo Rechi Vita
Without this patch we can't establish a SCO connection with this adapter. This adapter is named "IMC Networks" under lsusb. T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3496 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-05-18Bluetooth: btqca: Add AR3002 rampatch supportLoic Poulain
This patch adds rampatch download compatibility for ROME >= 3.2. Starting with ROME 3.2, the 'download mode' field of the rampatch header indicates if the controller acknowledges (or not) the received rampatch segments. If not, we need to send all the segments without expecting any event from the controller (except for the last segment). Goal is (I assume) to speed-up rampatch download. This fixes BT on Dragonboard-600c P2 which includes the following BT controller: hci0: ROME Patch Version Request hci0: Product:0x00000008 hci0: Patch :0x00000111 hci0: ROM :0x00000302 hci0: SOC :0x00000023 Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-05-18Bluetooth: hci_ldisc: Provide a 'default' switch caseFabio Estevam
When both CONFIG_BT_HCIUART_INTEL and CONFIG_BT_HCIUART_BCM are not selected, sparse complains like this: drivers/bluetooth/hci_ldisc.c:437:9: warning: switch with no cases Fix the sparse warning by proving a default switch case. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-05-18Bluetooth: btusb: add ID for LiteOn 04ca:301aVic Wei
Contains a QCA6174A chipset, with USB BT. Let's support loading firmware on it. From usb-devices: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=301a Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Vic Wei <vwei@codeaurora.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-05-18Bluetooth: btbcm: btbcm_initialize(): Initialize hw_name to "BCM"Hans de Goede
Initialize hw_name to "BCM", this avoids the need for a number of NULL checks on hw_name later. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-05-18Bluetooth: btbcm: Remove duplicate code from btbcm_setup_patchram()Hans de Goede
btbcm_setup_patchram() starts with initializing the controller (and getting the firmware filename) and then after loading the firmware, does a re-init. This almost entirely duplicates the code in btbcm_initialize(), use that function instead. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-05-18Bluetooth: btbcm: Allow using btbcm_initialize() for reinitHans de Goede
btbcm_finalize() does a re-init of the controller, which is almost the same as the initial init. Modify btbcm_initialize() so that it can be used for this re-init and modify btbcm_finalize() to use it. As an added bonus this also makes the dev_info from btbcm_finalize() use the proper hw_name instead of always printing "BCM". Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-05-18Bluetooth: btbcm: Make btbcm_initialize() also work for USB connected devicesHans de Goede
Make btbcm_initialize() also work for USB connected device, btbcm_initialize() and btbcm_setup_patchram() are quite similar, this is a preparation patch for making btbcm_setup_patchram() use btbcm_initialize() to remove the code duplication. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 15:56:01 +0000