summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-01-14bcma: use consistent case for 'hex' constantsNathan Hintz
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-14bcma: add support for 1 and 2 byte extended config space accessNathan Hintz
The sanity checks allow 1 and 2 byte reads/writes of the extended PCI config space to proceed; however, the code only supports 4 byte reads/writes. This patch adds support for 1 and 2 byte reads/writes of the extended PCI config space. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-14bcma: don't map/unmap a subset of the PCI config spaceNathan Hintz
For PCI config space access offsets < 256 for device '0', bcma_extpci_write_config performs an 'ioremap_nocache' on a 4 byte section of the PCI config space (an area that has already previously been mapped), and then subsequently unmaps that 4 byte section. This can't be a good thing for future read access from that now unmapped location. Modify the config space writes to use the existing access functions (similar to how it is done for the reads). Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-14bcma: jump to 'out' label for invalid 'func' valueNathan Hintz
Consistently jump to the 'out' label for error conditions (adds missing check for 'func' validity in bcma_extpci_write_config). Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-14bcma: delete duplicate readlNathan Hintz
The 'val' has already been read by the prior call to 'mips_busprobe32'; this 'readl' is unnecessary. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-14bcma: fix bcm4716/bcm4748 i2s irqflagNathan Hintz
The default irqflag assignment for the I2S core on some Broadcom 4716/4748 devices is invalid and needs to be corrected (from the Broadcom SDK). Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-14ath9k_hw: ar9002_hw_spectral_scan_config() can be staticFengguang Wu
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-14Merge tag 'nfc-next-3.9-1' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel Ortiz <sameo@linux.intel.com> says: "This is the first NFC patchset targeted at the 3.9 merge window. It brings the following goodies: - LLCP socket timestamping (To be used e.g with the recently released nfctool application for a more efficient skb timestamping when sniffing). - A pretty big pn533 rework from Waldemar, preparing the driver to support more flavours of pn533 based devices. - HCI changes from Eric in preparation for the microread driver support. - Some LLCP memory leak fixes, cleanups and slight improvements. - pn544 and nfcwilink move to the devm_kzalloc API. - An initial Secure Element (SE) API. - An nfc.h license change from the original author, allowing non GPL application code to safely include it." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-13NFC: pn533: Fix bad allocation sizeThierry Escande
Use dereferenced pointer in sizeof instead of pointer itself. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-11bcma: update pci configuration for bcm4706/bcm4716Nathan Hintz
Update the PCI configuration for BCM4706 and BCM4716 per the 2011 Broadcom SDK. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-11ath9k_hw: add tx gain tables for newer devicesFelix Fietkau
Improves stability on affected devices and also fixes the Tx IQ calibration related regression on some AR9340 devices such as the TP-Link TL-WDR4300. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-11bcma: return the mips irq number in bcma_core_irqNathan Hintz
The irq signal numbers that are send by the cpu are increased by 2 from the number programmed into the mips core by bcma. Return the irq number on which the irqs are send in bcma_core_irq() now. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-11bcma: fix compile errorHauke Mehrtens
This error was introduced in: commit e3f05a42faac627d8704c76c1927e09b22443b7b Author: Hauke Mehrtens <hauke@hauke-m.de> Date: Fri Jan 4 00:51:21 2013 +0100 bcma: mips: explicit assign IRQ numbers CC drivers/bcma/driver_mips.o drivers/bcma/driver_mips.c: In function 'bcma_core_mips_init': drivers/bcma/driver_mips.c:302:4: error: implicit declaration of function 'bcma_core_irq' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[6]: *** [drivers/bcma/driver_mips.o] Error 1 Reported-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-11ath9k: fix spectral scan endless mode on AR9002Simon Wunderlich
There was a copy+paste error in ar9002 for the endless spectral mode, fix that. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-11ssb: add database of serial flash memoriesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-11mac80211_hwsim: fix beacon timestamp and mactimeThomas Pedersen
Set the beacon timestamp once during "transmission" so the monitor interface also gets a timestamped beacon. Also use a common base between TX timestamp and RX mactime. This eliminates "TX" path delay, which shows up as a constant error in Toffset. Get the global TSF once before iterating over all RX HWs, so they all set a mactime with the same time base. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-11drivers/nfc/nfcwilink.c: use devm_kzallocJulia Lawall
devm_kzalloc allocates memory that is released when a driver detaches. This patch uses devm_kzalloc for data that is allocated in the probe function of a platform device and is only freed in the remove function. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-10NFC: pn533: Fix missing parenthesisWaldemar Rymarkiewicz
This is a quite critical patch as it fixes potential reference to undefined general_bytes which were never set correctly on target activation due to missing parenthesis. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: Initial Secure Element APISamuel Ortiz
Each NFC adapter can have several links to different secure elements and that property needs to be exported by the drivers. A secure element link can be enabled and disabled, and card emulation will be handled by the currently active one. Otherwise card emulation will be host implemented. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn544: Use devm_kzalloc APISamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn544: Use module_i2c_driverSamuel Ortiz
The pn544 init routine does nothing but adding the driver to the i2c bus. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn544: Separate the core code and the i2c one into different modulesSamuel Ortiz
As we may need to support other physical layers, we can avoid linking the core part into each and every pn544 module. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: Add HCI quirks to support driver (non)standard implementationsEric Lapuyade
Some chips diverge from the HCI spec in their implementation of standard features. This adds a new quirks parameter to nfc_hci_allocate_device() to let the driver indicate its divergence. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: Fixed skb leak in tm_send() nfc and hci ops implementationsEric Lapuyade
Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: Changed event_received hci ops result semanticEric Lapuyade
Some chips use a standard HCI event code, destined to a proprietary gate, with a different meaning. Therefore, the HCI driver must always have a chance to intercept the event before standard processing is attempted. The new semantic specifies that the result value "1" means that the driver doesn't especially handle the event. result <= 0 means it was handled. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: Added error handling in event_received hci opsEric Lapuyade
There is no use to return an error if the caller doesn't get it. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: nfcwilink: Use devm_kzallocJulia Lawall
devm_kzalloc allocates memory that is released when a driver detaches. This patch uses devm_kzalloc for data that is allocated in the probe function of a platform device and is only freed in the remove function. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn533: Introduce ops for frame logicWaldemar Rymarkiewicz
Encapsulate whole frame logic (tx/rx frame structure and size) inside the ops structure to make the core driver generic for devices which handle frames in non standard menner (different then pn533 spec say). Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn533: Remove unused dev->wq_in_frameWaldemar Rymarkiewicz
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn533: Cleanup pn533_cmd_complete_tWaldemar Rymarkiewicz
'params' arg in pn533_cmd_complete_t definition has been deprecated and currently is not in use (resp skb is pass in arg ptr), so remove it. Also 'params_len' arg is used as a transfer status indicator, so simply reword it appropriately. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn533: Remove deprecated dev->out_frame buffWaldemar Rymarkiewicz
As it's not used anymore get rid of that buffer. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn533: Use skb in __pn533_send_cmd_frame_asynWaldemar Rymarkiewicz
__pn533_send_cmd_frame_async() should be frame type independent. So, don't use pn533_frame type params and instead use skb for req and resp pointers. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn533: Don't use out_frame in pn533_send_ackWaldemar Rymarkiewicz
dev->out_frame buffer is much bigger for ACK frame needs. Use local buffer instead. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn533: Cleanup debug messagesWaldemar Rymarkiewicz
Remove debug messages which do not include valueable informations in debug mode. Add some new ones for better tracking or reword when if necessary. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn533: Fix urb->status handlingWaldemar Rymarkiewicz
Fix text message to be more suitable for the error code and treat ESHUTDOWN as an error not debug msg. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn533: Remove unused pn533_send_cmd_frame_asyWaldemar Rymarkiewicz
Remove obsolete send async api as it's no longer used. Remove global dev->in_frame as well, as each packet is kept is a seperate skb struct now, so that's not used anymore. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn533: Fix minor style issuesWaldemar Rymarkiewicz
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn533: Fix open parenthesis alignmentWaldemar Rymarkiewicz
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn533: Fix spacing issuesWaldemar Rymarkiewicz
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn533: Fix quoted strings split across linesWaldemar Rymarkiewicz
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn533: Remove frame logic from poll cmdsWaldemar Rymarkiewicz
Remove frame logic from start_pool cb using the new iface for async send. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn533: Dump tx and rx data in debug modeWaldemar Rymarkiewicz
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn533: Del frame logic from Data Exchange cmdWaldemar Rymarkiewicz
Remove frame logic from transceive cb using new iface for async send. For pn533_wq_mi_recv() use pn533_send_cmd_direct_async which sends the cmd directly to the hardware, skipping cmd queue. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn533: Del frame logic from InJumForDep cmdWaldemar Rymarkiewicz
Remove frame logic from InJmumpForDEP command using the new iface for async send. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn533: Del frame logic from TgGet/SetData cmdWaldemar Rymarkiewicz
Remove frame logic from TgSetData and TgGetData commands using the new iface for async send. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn533: Remove pn533_send_cmd_frame_syncWaldemar Rymarkiewicz
Remove obsolate pn533_send_cmd_frame_sync() and use previously added new iface for sync send. The new interface require the use of individual skb for each cmd which removes some memcpy calls and hides frame logic. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn533: Add pn533_alloc_skb for req allocationWaldemar Rymarkiewicz
Allocate sk_buff for the request. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn533: Add a new pn533_send_sync ifaceWaldemar Rymarkiewicz
It is intended to replace pn533_send_cmd_frame_sync() iface which requires from the caller to create complete frame. The new function constructs a complete frame itself and sends it out in sync manner. This way frame logic is hidden from the caller. pn533_send_cmd_sync() returns ERR_PTR in case of an error or a pointer to valid response sk_buff otherwise. The pointer must be freed by the caller when it's been consumed. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn533: Add a new pn533_send_data_async ifaceWaldemar Rymarkiewicz
This iface is intended to be used with DEP transfers. It differs from pn533_send_cmd_async() in the way the response skb is allocated. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn533: Add a new pn533_send_cmd_async ifaceWaldemar Rymarkiewicz
This is intendend to replace pn533_send_cmd_frame_async() which requires from the caller to create a complete frame. The new function constructs a frame and sends it out which hides the frame logic and avoid code duplication. The caller has to allocate skb and put its payload there, and finally provide the skb together with a complete cb to pn533_send_cmd_async(). Response skb is allocated by the core part and pass to the caller cb. Next, the caller has to free it when is not needed anymore or pass it up to the stack. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 13:09:54 +0000