summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-10-22USB: ehci tdi : let's tdi_reset set host modeMatthieu CASTET
tdi_reset is already taking care of setting host mode for tdi devices. Don't duplicate code in platform driver. Make ehci_halt a nop if the controller is not in host mode (otherwise it will fail), and let's ehci_reset do the tdi_reset. We need to move hcd->has_tt flags before ehci_halt, in order ehci_halt knows we are a tdi device. Before the setup routine was doing : - put controller in host mode - ehci_halt - ehci_init - hcd->has_tt = 1; - ehci_reset Now we do : - hcd->has_tt = 1; - ehci_halt - ehci_init - ehci_reset PS : now we handle correctly the device -> host transition. Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22USB: Kconfig: fix typos in USB_FUNCTIONFS* descriptionMichael Prokop
It's spelled "Function Filesystem" / "FunctionFS". This patch fixes some typos (FunctioFS->FunctionFS, Funcion->Function, funcion->function, redundant "as") in the Kconfig description of USB_FUNCTIONFS*. Signed-off-by: Michael Prokop <mika@grml.org> Acked-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22USB: g_file_storage: don't generate automatic serial stringAlan Stern
This patch (as1413) changes g_file_storage to avoid generating a bogus automatic serial-number string descriptor. If the user doesn't provide a valid serial number via a module parameter then a warning is logged and the gadget won't have any serial string descriptor at all. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> CC: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22USB: langwell: Remove unnecessary return's from void functionsJoe Perches
There are about 2500 void functions in drivers/usb Only a few used return; at end of function. Standardize them a bit. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22USB: output an error message when the pipe type doesn't match the endpoint typeSimon Arlott
Commit f661c6f8c67bd55e93348f160d590ff9edf08904 adds a check of the pipe type if CONFIG_USB_DEBUG is enabled, but it doesn't output anything if this scenario occurs. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22USB: gadget: amd5536udc.c: Remove double testJulia Lawall
The same expression is tested twice and the result is the same each time. Instead test for use_dma_ppb as in the test above. The sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @expression@ expression E; @@ ( * E || ... || E | * E && ... && E ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22usb gadget: don't save bind callback in struct usb_configurationUwe Kleine-König
The bind function is most of the time only called at init time so there is no need to save a pointer to it in the configuration structure. This fixes many section mismatches reported by modpost. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [m.nazarewicz@samsung.com: updated for -next] Signed-off-by: Michał Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22usb gadget: don't save bind callback in struct usb_composite_driverMichal Nazarewicz
The bind function is most of the time only called at init time so there is no need to save a pointer to it in the composite driver structure. This fixes many section mismatches reported by modpost. Signed-off-by: Michał Nazarewicz <m.nazarewicz@samsung.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22usb gadget: don't save bind callback in struct usb_gadget_driverUwe Kleine-König
To accomplish this the function to register a gadget driver takes the bind function as a second argument. To make things clearer rename the function to resemble platform_driver_probe. This fixes many section mismatches like WARNING: drivers/usb/gadget/g_printer.o(.data+0xc): Section mismatch in reference from the variable printer_driver to the function .init.text:printer_bind() The variable printer_driver references the function __init printer_bind() All callers are fixed. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [m.nazarewicz@samsung.com: added dbgp] Signed-off-by: Michał Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22USB: Revert "USB: gadget: section mismatch warning fixed"Michal Nazarewicz
This reverts a commit which proposed an invalid solution for a section mismatch. Next 3 commits will fix it correctly. Conflicts: drivers/usb/gadget/mass_storage.c Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22USB: gadget: g_multi: moved strings handling code to compositeMichal Nazarewicz
This patch removes some of the string registration from the Multifunction Composite Gadget as composite layer can handle the iManufacturer and iProduct for us. This also adds the "needs_serial" so that composite layer will issue a warning if user space fails to provide the iSerialNumber module parameter. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22USB: gadget: mass_storage: moved strings handling code to compositeMichal Nazarewicz
This patch removes string registration from the Mass Storage Gadget. With recent changes to the composite framework, all that we need is handled by the composite layer. This means composite registers a string ID for manufacturer and product. This also adds the "needs_serial" so that composite layer will issue a warning if user space fails to provide the iSerialNumber module parameter. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22USB: gadget: composite: Better string override handlingMichal Nazarewicz
The iManufatcurer, iProduct and iSerialNumber composite module parameters were only used when the gadget driver registers strings for manufacturer, product and serial number. If the gadget never bothered to set corresponding fields in USB device descriptors those module parameters are ignored. This commit makes the parameters work even if the strings ID have not been assigned. It also changes the way IDs are overridden -- what IDs are overridden is now saved in usb_composite_dev structure -- which makes it unnecessary to modify the string tables the way previous code did. The commit also adds a iProduct and iManufatcurer fields to the usb_composite_device structure. If they are set, appropriate strings are reserved and added to device descriptor. This makes it unnecessary for gadget drivers to maintain code for setting those. If iProduct is not set it defaults to usb_composite_device::name; if iManufatcurer is not set a default "<system> <release> with <gadget-name>" is used. The last thing is that if needs_serial field of usb_composite_device is set and user failed to provided iSerialNumber parameter a warning is issued. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22USB: gadget: functionfs: code cleanupMichal Nazarewicz
This patch removes some of the string registration from the FunctionFS Gadget as composite layer can handle the iManufacturer and iProduct for us. It also removes some of the module parameters which were redundant as well as changes the name of others to better much the module parameter of the composite layer. Other then that, it also fixes formatting of multiline comments to match the coding style. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22usb: gadget: mass_storage: optional SCSI WRITE FUA bitMichal Nazarewicz
The nofua parameter (optionally ignore SCSI WRITE FUA) was added to the File Storage Gadget some time ago. This patch adds the same functionality to the Mass Storage Function. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22usb: gadget: storage: remove nofua file when unbindingMichal Nazarewicz
The dev_attr_nofua file was created during fsg_bind() but was never removed. Made it a bit more symmetrical and added code to remove the file in fsg_unbind(). Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Acked-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22USB: gadget: g_ffs: fixed vendor and product IDMichal Nazarewicz
This patch fixes the vendor and product ID the gadget uses by replacing the temporary IDs that were used during development (which should never get into mainline) with proper IDs. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22USB: gadget: g_multi: fixed vendor and product IDMichal Nazarewicz
This patch fixes the vendor and product ID the gadget uses by replacing the temporary IDs that were used during development (which should never get into mainline) with proper IDs. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22USB: core: update comment to match current function nameWolfram Sang
Found while debugging a USB problem and trying to find the mentioned function. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22USB Gadget: Verify VBUS current before setting the device self-powered bitParirajan Muthalagu
Acked-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Praveena Nadahally <praveen.nadahally@stericsson.com> Signed-off-by: Parirajan Muthalagu <parirajan.muthalagu@stericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22USB: sam-ba: add driver for Atmel SAM Boot Assistant (SAM-BA)Johan Hovold
Add new driver to access the SAM-BA boot application of Atmel AT91SAM devices. The SAM-BA firmware cannot handle merged write requests so we cannot use the generic write implementation (which uses the port write fifo). Tested with the SAM-BA 2.10 tools and an Atmel at91sam9260-ek. Signed-off-by: Johan Hovold <jhovold@gmail.com> Tested-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22USB: gadget: dbgp: cleanup: remove unneeded checkDan Carpenter
len is always greater than or equal to zero here. First of all, it's type is unsigned and also we only assign it numbers which are greater than or equal to zero. Removing the check lets us pull everything in an indent level. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Stephane duverger <stephane.duverger@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22USB: langwell: USB Client driver memory handlingJiebingLi
SRAM Memory handling for USB client function Signed-off-by: JiebingLi <jiebing.li@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22USB: langwell: USB Client Remote Wakeup SupportJiebingLi
Remote wakeup support in client driver. Made non-debug only this time. Signed-off-by: JiebingLi <jiebing.li@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22USB: langwell: USB Client PHY low power mode settingJiebingLi
PHY low power mode setting with a static function Signed-off-by: JiebingLi <jiebing.li@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22USB: langwell: USB Client Endpoint initializationJiebingLi
Endpoint software structure initialization Signed-off-by: JiebingLi <jiebing.li@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22USB: langwell: USB Client driver code cleanupJiebingLi
Code cleanup by using standard debugging API's and USB inline functions Signed-off-by: JiebingLi <jiebing.li@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22usb: Add Intel Langwell USB OTG Transceiver DriverHao Wu
This adds support for the USB transceiver driver in the Langwell chipset used on the Intel MID platforms. It folds up the original patch set which includes basic support for the device, PHY low power mode (Please notice that there is a limitation, after we drive VBus down, 2ms delay is required from SCU FW to sync up OTGSC register with USBCFG register), software timers (the hardware timers do not work in low power mode), HNP, SRP. Signed-off-by: Hao Wu <hao.wu@intel.com> Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-20Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: MIPS: O32 compat/N32: Fix to use compat syscall wrappers for AIO syscalls. MAINTAINERS: Change list for ioc_serial to linux-serial. SERIAL: ioc3_serial: Return -ENOMEM on memory allocation failure MIPS: jz4740: Fix Kbuild Platform file. MIPS: Repair Kbuild make clean breakage.
2010-10-20virtio: console: Don't block entire guest if host doesn't read dataAmit Shah
If the host is slow in reading data or doesn't read data at all, blocking write calls not only blocked the program that called write() but the entire guest itself. To overcome this, let's not block till the host signals it has given back the virtio ring element we passed it. Instead, send the buffer to the host and return to userspace. This operation then becomes similar to how non-blocking writes work, so let's use the existing code for this path as well. This code change also ensures blocking write calls do get blocked if there's not enough room in the virtio ring as well as they don't return -EAGAIN to userspace. Signed-off-by: Amit Shah <amit.shah@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> CC: stable@kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] bsg: fix incorrect device_status value [SCSI] Fix VPD inquiry page wrapper
2010-10-19SERIAL: ioc3_serial: Return -ENOMEM on memory allocation failureJulia Lawall
In this code, 0 is returned on memory allocation failure, even though other failures return -ENOMEM or other similar values. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression ret; expression x,e1,e2,e3; @@ ret = 0 ... when != ret = e1 *x = \(kmalloc\|kcalloc\|kzalloc\)(...) ... when != ret = e2 if (x == NULL) { ... when != ret = e3 return ret; } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> To: Pat Gefre <pfg@sgi.com> Cc: kernel-janitors@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1704/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-19Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: avivo cursor workaround applies to evergreen as well
2010-10-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: evdev - fix EVIOCSABS regression Input: evdev - fix Ooops in EVIOCGABS/EVIOCSABS
2010-10-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: fix TI TSB82AA2 regression since 2.6.35
2010-10-18mxc_nand: do not depend on disabling the irq in the interrupt handlerSascha Hauer
This patch reverts the driver to enabling/disabling the NFC interrupt mask rather than enabling/disabling the system interrupt. This cleans up the driver so that it doesn't rely on interrupts being disabled within the interrupt handler. For i.MX21 we keep the current behaviour, that is calling enable_irq/disable_irq_nosync to enable/disable interrupts. This patch is based on earlier work by John Ogness. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: John Ogness <john.ogness@linutronix.de> Tested-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-18Merge branch 'for-linus/i2c/2636-rc8' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'for-linus/i2c/2636-rc8' of git://git.fluff.org/bjdooks/linux: i2c-imx: do not allow interruptions when waiting for I2C to complete i2c-davinci: Fix TX setup for more SoCs
2010-10-18Input: evdev - fix EVIOCSABS regressionDaniel Mack
448cd16 ("Input: evdev - rearrange ioctl handling") broke EVIOCSABS by checking for the wrong direction bit. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Sven Neumann <s.neumann@raumfeld.com> Tested-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-18Input: evdev - fix Ooops in EVIOCGABS/EVIOCSABSDaniel Mack
This fixes a regression introduced by the dynamic allocation of absinfo for input devices. We need to bail out early for input devices which don't have absolute axis. [ 929.664303] Pid: 2989, comm: input Not tainted 2.6.36-rc8+ #14 MS-7260/MS-7260 [ 929.664318] EIP: 0060:[<c12bdc01>] EFLAGS: 00010246 CPU: 0 [ 929.664331] EIP is at evdev_ioctl+0x4f8/0x59f [ 929.664341] EAX: 00000040 EBX: 00000000 ECX: 00000006 EDX: f45a1efc [ 929.664355] ESI: 00000000 EDI: f45a1efc EBP: f45a1f24 ESP: f45a1eb8 [ 929.664369] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 929.664402] f470da74 f6a30e78 f462c240 00000018 bfe4a260 00000000 f45b06fc 00000000 [ 929.664429] <0> 000000c4 b769d000 c3544620 f470da74 f45b06fc f45b06fc f45a1f38 c107dd1f [ 929.664458] <0> f4710b74 000000c4 00000000 00000000 00000000 0000029d 00000a74 f4710b74 [ 929.664500] [<c107dd1f>] ? handle_mm_fault+0x2be/0x59a [ 929.664513] [<c12bd709>] ? evdev_ioctl+0x0/0x59f [ 929.664524] [<c1099d30>] ? do_vfs_ioctl+0x494/0x4d9 [ 929.664538] [<c10432a1>] ? up_read+0x16/0x29 [ 929.664550] [<c101c818>] ? do_page_fault+0x2ff/0x32d [ 929.664564] [<c108d048>] ? do_sys_open+0xc5/0xcf [ 929.664575] [<c1099db6>] ? sys_ioctl+0x41/0x61 [ 929.664587] [<c1002710>] ? sysenter_do_call+0x12/0x36 [ 929.684570] ---[ end trace 11b83e923bd8f2bb ]--- Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-18i2c-imx: do not allow interruptions when waiting for I2C to completeMarc Kleine-Budde
The i2c_imx_trx_complete() function is using wait_event_interruptible_timeout() to wait for the I2C controller to signal that it has completed an I2C bus operation. If the process that causes the I2C operation receives a signal, the wait will be interrupted, returning an error. It is better to let the I2C operation finished before handling the signal (i.e. returning into userspace). It is safe to use wait_event_timeout() instead, because the timeout will allow the process to exit if the I2C bus hangs. It's also better to allow the I2C operation to finish, because unacknowledged I2C operations can cause the I2C bus to hang. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-10-18i2c-davinci: Fix TX setup for more SoCsJon Povey
This patch is an improvement to 4bba0fd8d1c6d405df666e2573e1a1f917098be0 which got to mainline a little early. Sudhakar Rajashekhara explains that at least OMAP-L138 requires MDR mode settings before DXR for correct behaviour, so load MDR first with STT cleared and later load again with STT set. Tested on DM355 connected to Techwell TW2836 and Wolfson WM8985 Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> Acked-by: Troy Kisky <troy.kisky@boundarydevices.com> Tested-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-10-18drm/radeon/kms: avivo cursor workaround applies to evergreen as wellAlex Deucher
Fixes cursor corruption in certain cases. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-17firewire: ohci: fix TI TSB82AA2 regression since 2.6.35Stefan Richter
Revert commit 54672386ccf36ffa21d1de8e75624af83f9b0eeb "firewire: ohci: fix up configuration of TI chips". It caused massive slow-down and data corruption with a TSB82AA2 based StarTech EC1394B2 ExpressCard and FireWire 800 harddisks. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/657081 http://thread.gmane.org/gmane.linux.kernel.firewire.user/4013 The fact that some card EEPROMs do not program these enhancements may be related to TSB81BA3 phy chip errata, if not to bugs of TSB82AA2 itself. We could re-add these configuration steps, but only conditional on a whitelist of cards on which these enhancements bring a proven positive effect. Reported-and-tested-by: Eric Shattow <lucent@gmail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> 2.6.35 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-10-15v4l1: fix 32-bit compat microcode loading translationLinus Torvalds
The compat code for the VIDIOCSMICROCODE ioctl is totally buggered. It's only used by the VIDEO_STRADIS driver, and that one is scheduled to staging and eventually removed unless somebody steps up to maintain it (at which point it should use request_firmware() rather than some magic ioctl). So we'll get rid of it eventually. But in the meantime, the compatibility ioctl code is broken, and this tries to get it to at least limp along (even if Mauro suggested just deleting it entirely, which may be the right thing to do - I don't think the compatibility translation code has ever worked unless you were very lucky). Reported-by: Kees Cook <kees.cook@canonical.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: sdio: fix SDIO suspend/resume regression
2010-10-15mmc: sdio: fix SDIO suspend/resume regressionOhad Ben-Cohen
Fix SDIO suspend/resume regression introduced by 4c2ef25fe0b "mmc: fix all hangs related to mmc/sd card insert/removal during suspend/resume": PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) pm_op(): platform_pm_suspend+0x0/0x5c returns -38 PM: Device pxa2xx-mci.0 failed to suspend: error -38 PM: Some devices failed to suspend 4c2ef25fe0b moved the card removal/insertion mechanism out of MMC's suspend/resume path and into pm notifiers (mmc_pm_notify), and that broke SDIO's expectation that mmc_suspend_host() will remove the card, and squash the error, in case -ENOSYS is returned from the bus suspend handler (mmc_sdio_suspend() in this case). mmc_sdio_suspend() is using this whenever at least one of the card's SDIO function drivers does not have suspend/resume handlers - in that case it is agreed to force removal of the entire card. This patch fixes this regression by trivially bringing back that part of mmc_suspend_host(), which was removed by 4c2ef25fe0b. Reported-and-tested-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: <stable@kernel.org> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-15Merge branch 'upstream-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Add Cando touch screen 15.6-inch product id HID: Add MULTI_INPUT quirk for turbox/mosart touchscreen HID: hidraw, fix a NULL pointer dereference in hidraw_write HID: hidraw, fix a NULL pointer dereference in hidraw_ioctl
2010-10-15Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: ubd: fix incorrect sector handling during request restart ps3disk: passing wrong variable to bvec_kunmap_irq()
2010-10-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: ehea: Fix a checksum issue on the receive path net: allow FEC driver to use fixed PHY support tg3: restore rx_dropped accounting b44: fix carrier detection on bind net: clear heap allocations for privileged ethtool actions NET: wimax, fix use after free ATM: iphase, remove sleep-inside-atomic ATM: mpc, fix use after free ATM: solos-pci, remove use after free net/fec: carrier off initially to avoid root mount failure r8169: use device model DMA API r8169: allocate with GFP_KERNEL flag when able to sleep
2010-10-13Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: ioat2: fix performance regression
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 19:07:46 +0000