summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-09-17hwmon: (lis3lv02d) Prevent NULL pointer dereferenceKuninori Morimoto
If CONFIG_PM was selected and lis3lv02d_platform_data was NULL, the kernel will be panic when halt command run. Reported-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Samu Onkalo <samu.p.onkalo@nokia.com> Sigend-off-by: Jean Delvare <khali@linux-fr.org>
2010-09-16Merge branch '2.6.36-fixes' of git://github.com/schandinat/linux-2.6Linus Torvalds
* '2.6.36-fixes' of git://github.com/schandinat/linux-2.6: drivers/video/via/ioctl.c: prevent reading uninitialized stack memory
2010-09-16Merge branch 'urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia pcnet_cs: try setting io_lines to 16 if card setup fails pcmcia: per-device, not per-socket debug messages pcmcia serial_cs.c: fix multifunction card handling
2010-09-16Merge git://git.infradead.org/users/cbou/battery-2.6.36Linus Torvalds
* git://git.infradead.org/users/cbou/battery-2.6.36: apm_power: Add missing break statement intel_pmic_battery: Fix battery charging status on mrst
2010-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: Enable NXP LPC32XX support in Kconfig (resend) watchdog: ts72xx_wdt: disable watchdog at probe watchdog: sb_wdog: release irq and reboot notifier in error path and module_exit()
2010-09-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator: wm8350-regulator - fix the logic of checking REGULATOR_MODE_STANDBY mode regulator: wm831x-ldo - fix the logic to set REGULATOR_MODE_IDLE and REGULATOR_MODE_STANDBY modes regulator: ab8500 - fix off-by-one value range checking for selector regulator: 88pm8607 - fix value range checking for accessing info->vol_table regulator: isl6271a-regulator - fix regulator_desc parameter for regulator_register() regulator: ad5398 - fix a memory leak regulator: Update e-mail address for Liam Girdwood regulator: set max8998->dev to &pdev->dev. regulator: tps6586x-regulator - fix bit_mask parameter for tps6586x_set_bits() regulator: tps6586x-regulator - fix value range checking for val regulator: max8998 - set max8998->num_regulators regulator: max8998 - fix memory allocation size for max8998->rdev regulator: tps6507x - remove incorrect comments regulator: max1586 - improve the logic of choosing selector regulator: ab8500 - fix the logic to remove already registered regulators in error path regulator: ab3100 - fix the logic to remove already registered regulators in error path regulator/ab8500: move dereference below the check for NULL
2010-09-16Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: only warn on mipmap size checks in r600 cs checker (v2) drm/radeon/kms: force legacy pll algo for RV620 LVDS drm: fix race between driver loading and userspace open. drm: Use a nondestructive mode for output detect when polling (v2) drm/radeon/kms: fix the colorbuffer CS checker for r300-r500 drm/radeon/kms: increase lockup detection interval to 10 sec for r100-r500 drm/radeon/kms/evergreen: fix backend setup drm: Use a nondestructive mode for output detect when polling drm/radeon: add some missing copyright headers drm: Only decouple the old_fb from the crtc is we call mode_set* drm/radeon/kms: don't enable underscan with interlaced modes drm/radeon/kms: add connector table for Mac x800 drm/radeon/kms: fix regression in RMX code (v2) drm: Fix regression in disable polling e58f637
2010-09-15drivers/video/via/ioctl.c: prevent reading uninitialized stack memoryDan Rosenberg
The VIAFB_GET_INFO device ioctl allows unprivileged users to read 246 bytes of uninitialized stack memory, because the "reserved" member of the viafb_ioctl_info struct declared on the stack is not altered or zeroed before being copied back to the user. This patch takes care of it. Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2010-09-15watchdog: Enable NXP LPC32XX support in Kconfig (resend)Kevin Wells
The NXP LPC32XX processor use the same watchdog as the Philips PNX4008 processor. Signed-off-by: Kevin Wells <wellsk40@gmail.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-09-15watchdog: ts72xx_wdt: disable watchdog at probeMika Westerberg
Since it may be already enabled by bootloader or some other utility. This patch makes sure that the watchdog is disabled before any userspace daemon opens the device. It is also required by the watchdog API. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-09-15watchdog: sb_wdog: release irq and reboot notifier in error path and ↵Akinobu Mita
module_exit() irq and reboot notifier are acquired in module_init() but never released. They should be released correctly, otherwise reloading the module or error during module_init() will cause a problem. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Andrew Sharp <andy.sharp@lsi.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-09-15pcmcia pcnet_cs: try setting io_lines to 16 if card setup failsDominik Brodowski
Some pcnet_cs compatible cards require an exact 16-lines match of the ioport areas specified in CIS, but set the "iolines" value in the CIS incorrectly. We can easily work around this issue -- same as we do in serial_cs -- by first trying setting iolines to the CIS-specified value, and then trying a 16-line match. Reported-and-tested-by: Wolfram Sang <w.sang@pengutronix.de> Hardware-supplied-by: Jochen Frieling <j.frieling@pengutronix.de> CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-15pcmcia: per-device, not per-socket debug messagesDominik Brodowski
As the iomem / ioport setup differs per device, it is much better to print out the device instead of the socket. Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-15pcmcia serial_cs.c: fix multifunction card handlingDominik Brodowski
We shouldn't overwrite pre-set values, and we should also set the port address to the beginning, and not the end of the 8-port range. CC: linux-serial@vger.kernel.org Reported-by: Komuro <komurojun-mbn@nifty.com> Hardware-supplied-by: Jochen Frieling <j.frieling@pengutronix.de> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-15drm/radeon/kms: only warn on mipmap size checks in r600 cs checker (v2)Alex Deucher
The texture base address registers are in units of 256 bytes. The original CS checker treated these offsets as bytes, so the original check was wrong. I fixed the units in a patch during the 2.6.36 cycle, but this ended up breaking some existing userspace (probably due to a bug in either userspace texture allocation or the drm texture mipmap checker). So for now, until we come up with a better fix, just warn if the mipmap size it too large. This will keep existing userspace working and it should be just as safe as before when we were checking the wrong units. These are GPU MC addresses, so if they fall outside of the VRAM or GART apertures, they end up at the GPU default page, so this should be safe from a security perspective. v2: Just disable the warning. It just spams the log and there's nothing the user can do about it. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: Jerome Glisse <glisse@freedesktop.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-14Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: mtd: pxa3xx: fix build error when CONFIG_MTD_PARTITIONS is not defined mtd: mxc_nand: configure pages per block for v2 controller mtd: OneNAND: Fix loop hang when DMA error at Samsung SoCs mtd: OneNAND: Fix 2KiB pagesize handling at Samsung SoCs mtd: Blackfin NFC: fix invalid free in remove() mtd: Blackfin NFC: fix build error after nand_scan_ident() change mxc_nand: Do not do byte accesses to the NFC buffer.
2010-09-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: fix hiddev's use of usb_find_interface HID: fixup blacklist entry for Asus T91MT HID: add device ID for new Asus Multitouch Controller HID: add no-get quirk for eGalax touch controller HID: Add quirk for eGalax touch controler. HID: add support for another BTC Emprex remote control HID: Set Report ID properly for Output reports on the Control endpoint. HID: Kanvus Note A5 tablet needs HID_QUIRK_MULTI_INPUT HID: Add support for chicony multitouch screens.
2010-09-14drm/radeon/kms: force legacy pll algo for RV620 LVDSAlex Deucher
There has been periodic evidence that LVDS, on at least some panels, prefers the dividers selected by the legacy pll algo. This patch forces the use of the legacy pll algo on RV620 LVDS panels. The old behavior (new pll algo) can be selected by setting the new_pll module parameter to 1. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=30029 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-14drm: fix race between driver loading and userspace open.Dave Airlie
Not 100% sure this is due to BKL removal, its most likely a combination of that + userspace timing changes in udev/plymouth. The drm adds the sysfs device before the driver has completed internal loading, this causes udev to make the node and plymouth to open it before we've completed loading. The proper solution is to delay the sysfs manipulation until later in loading however this causes knock on issues with sysfs connector nodes, so we can use the global mutex to serialise loading and userspace opens. Reported-by: Toni Spets (hifi on #radeon) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-14drm: Use a nondestructive mode for output detect when polling (v2)Chris Wilson
v2: Julien Cristau pointed out that @nondestructive results in double-negatives and confusion when trying to interpret the parameter, so use @force instead. Much easier to type as well. ;-) And fix the miscompilation of vmgfx reported by Sedat Dilek. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-14HID: fix hiddev's use of usb_find_interfaceGuillaume Chazarain
My macbook infrared remote control was broken by commit bd25f4dd6972755579d0ea50d1a5ace2e9b00d1a ("HID: hiddev: use usb_find_interface, get rid of BKL"). This device appears in dmesg as: apple 0003:05AC:8242.0001: hiddev0,hidraw0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0 It stopped working as lircd was getting ENODEV when opening /dev/usb/hiddev0. AFAICS hiddev_driver is a dummy driver so usb_find_interface(&hiddev_driver) does not find anything. The device is associated with the usbhid driver, so let's do usb_find_interface(&hid_driver) instead. $ ls -l /sys/devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/usb/hiddev0/device/driver lrwxrwxrwx 1 root root 0 2010-09-12 16:28 /sys/devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/usb/hiddev0/device/driver -> ../../../../../../bus/usb/drivers/usbhid Signed-off-by: Guillaume Chazarain <guichaz@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-13Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: spi/pl022: move probe call to subsys_initcall() powerpc/5200: mpc52xx_uart.c: Add of_node_put to avoid memory leak spi/pl022: fix APB pclk power regression on U300 spi/spi_s3c64xx: Warn if PIO transfers time out spi/s3c64xx: Fix incorrect reuse of 'val' local variable. spi/s3c64xx: Fix compilation warning spi/dw_spi: clean the cs_control code spi/dw_spi: Allow interrupt sharing spi/spi_s3c64xx: Increase dead reckoning time in wait_for_xfer() spi/spi_s3c64xx: Move to subsys_initcall() spi: free children in spi_unregister_master, not siblings gpiolib: Add 'struct gpio_chip' forward declaration for !GPIOLIB case of: Fix missing includes - ll_temac spi/spi_s3c64xx: Staticise non-exported functions spi/spi_s3c64xx: Make probe more robust against missing board config
2010-09-13drm/radeon/kms: fix the colorbuffer CS checker for r300-r500Marek Olšák
This commit fixes bogus CS rejection if it contains a sequence of the following operations: - Set the color buffer 0. track->cb[i].robj becomes non-NULL. - Render. - Set a larger zbuffer than the previously-set color buffer. - Set a larger scissor area as well. - Set the color channel mask to 0 to do depth-only rendering. - Render. --> rejected, because track->cb[i].robj remained non-NULL, therefore the conditional checking for the color channel mask and friends is not performed, and the larger scissor area causes the rejection. This fixes bugs: - https://bugs.freedesktop.org/show_bug.cgi?id=29762 - https://bugs.freedesktop.org/show_bug.cgi?id=28869 And maybe some others which seem to look the same. If possible, this commit should go to stable as well. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-13drm/radeon/kms: increase lockup detection interval to 10 sec for r100-r500Marek Olšák
One subtest of mesa/demos/gltestperf takes 9 seconds to complete, so to prevent an unnecessary gpu reset followed by a hardlock, I am increasing the interval to 10 seconds after which a GPU is considered in a locked-up state. This is on RV530. However, with a little slower GPU, we would surpass the interval easily, so this is not a good fix for gltestperf. Nevertheless, this commit also fixes hardlocks in the applications which render at speed of less than 1 frame per second, where the whole frame consists of only one command stream. The game Tiny & Big is an example. This bar is now lowered to 0.1 fps. Now the question comes down to whether we should (often unsuccessfully) reset the GPU at all? Once we have stable enough drivers, we won't have to. Has the time come already? If possible, this commit should go to stable as well. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-13drm/radeon/kms/evergreen: fix backend setupAlex Deucher
This patch fixes rendering errors on some evergreen boards. Hardcoding the backend map is not an optimal solution, but a better fix is being worked on. Similar to the fix for rv740 (6271901d828b34b27607314026deaf417f9f9b75). Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=29986 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-13drm: Use a nondestructive mode for output detect when pollingChris Wilson
Destructive load-detection is very expensive and due to failings elsewhere can trigger system wide stalls of up to 600ms. A simple first step to correcting this is not to invoke such an expensive and destructive load-detection operation automatically. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29536 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16265 Reported-by: Bruno Prémont <bonbons@linux-vserver.org> Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-13drm/radeon: add some missing copyright headersAlex Deucher
Noticed while adding evergreen blit support. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-13drm: Only decouple the old_fb from the crtc is we call mode_set*Chris Wilson
Otherwise when disabling the output we switch to the new fb (which is likely NULL) and skip the call to mode_set -- leaking driver private state on the old_fb. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29857 Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Airlie <airlied@redhat.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-13drm/radeon/kms: don't enable underscan with interlaced modesAlex Deucher
They aren't compatible. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-13drm/radeon/kms: add connector table for Mac x800Alex Deucher
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=28671 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-13drm/radeon/kms: fix regression in RMX code (v2)Alex Deucher
caused by d65d65b175a29bd7ea2bb69c046419329c4a5db7 need to update the radeon crtc priv native mode before using it. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=30049 v2: integrate v/h copy paste typo Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-13drm: Fix regression in disable polling e58f637Chris Wilson
I broke out my trusty i845 and found a new boot failure, which upon inspection turned out to be a recursion within: drm_helper_probe_single_connector_modes() -> drm_helper_hpd_irq_event() -> intel_crt_detect() -> drm_helper_probe_single_connector_modes() Calling drm_kms_helper_poll_enable() instead performs the desired re-initialisation of the polling should the user have toggled the parameter, without the recursive side-effect. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-13mtd: pxa3xx: fix build error when CONFIG_MTD_PARTITIONS is not definedMark F. Brown
Signed-off-by: Mark F. Brown <mark.brown314@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-13mtd: mxc_nand: configure pages per block for v2 controllerSascha Hauer
This patch initializes the pages per block field in CONFIG1 for v2 controllers. It also sets the FP_INT field. This is the last field not correctly initialized, so we can switch from read/modify/write the CONFIG1 reg to just write the correct value. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: John Ogness <john.ogness@linutronix.de> Tested-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-13mtd: OneNAND: Fix loop hang when DMA error at Samsung SoCsKyungmin Park
When DMA error occurs. it's loop hang since it can't exit the loop. and it's the right DMA handling code as Spec. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-13mtd: OneNAND: Fix 2KiB pagesize handling at Samsung SoCsKyungmin Park
Wrong assumption bufferram can be switched between BufferRAM0 and BufferRAM1 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-13mtd: Blackfin NFC: fix invalid free in remove()Mike Frysinger
Since info->mtd isn't dynamically allocated, we shouldn't attempt to kfree() it. Otherwise we get random fun corruption when unloading the driver built as a module. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-13mtd: Blackfin NFC: fix build error after nand_scan_ident() changeMike Frysinger
Seems some patches got out sync when being merged. The Blackfin NFC driver was updated to use nand_scan_ident(), but it missed the change where nand_scan_ident() now takes 3 arguments. So update this driver to fix build failures. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-11Merge branch 'pm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / Hibernate: Avoid hitting OOM during preallocation of memory PM QoS: Correct pr_debug() misuse and improve parameter checks PM: Prevent waiting forever on asynchronous resume after failing suspend
2010-09-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] fix use-after-free in scsi_init_io() [SCSI] sd: fix medium-removal bug [SCSI] qla2xxx: Update version number to 8.03.04-k0. [SCSI] qla2xxx: Check for empty slot in request queue before posting Command type 6 request. [SCSI] qla2xxx: Cover UNDERRUN case where SCSI status is set. [SCSI] qla2xxx: Correctly set fw hung and complete only waiting mbx. [SCSI] qla2xxx: Reset seconds_since_last_heartbeat correctly. [SCSI] qla2xxx: make rport deletions explicit during vport removal [SCSI] qla2xxx: Fix vport delete issues [SCSI] sd, sym53c8xx: Remove warnings after vsprintf %pV introducation. [SCSI] Fix warning: zero-length gnu_printf format string [SCSI] hpsa: disable doorbell reset on reset_devices [SCSI] be2iscsi: Fix for Login failure [SCSI] fix bio.bi_rw handling
2010-09-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (28 commits) ipheth: remove incorrect devtype to WWAN MAINTAINERS: Add CAIF sctp: fix test for end of loop KS8851: Correct RX packet allocation udp: add rehash on connect() net: blackhole route should always be recalculated ipv4: Suppress lockdep-RCU false positive in FIB trie (3) niu: Fix kernel buffer overflow for ETHTOOL_GRXCLSRLALL ipvs: fix active FTP gro: Re-fix different skb headrooms via-velocity: Turn scatter-gather support back off. ipv4: Fix reverse path filtering with multipath routing. UNIX: Do not loop forever at unix_autobind(). PATCH: b44 Handle RX FIFO overflow better (simplified) irda: off by one 3c59x: Fix deadlock in vortex_error() netfilter: discard overlapping IPv6 fragment ipv6: discard overlapping fragment net: fix tx queue selection for bridged devices implementing select_queue bonding: Fix jiffies overflow problems (again) ... Fix up trivial conflicts due to the same cgroup API thinko fix going through both Andrew and the networking tree. However, there were small differences between the two, with Andrew's version generally being the nicer one, and the one I merged first. So pick that one. Conflicts in: include/linux/cgroup.h and kernel/cgroup.c
2010-09-10Merge branch 'drm-intel-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel: drm/i915: don't enable self-refresh on Ironlake drm/i915: Double check that the wait_request is not pending before warning Revert "drm/i915: Warn if we run out of FIFO space for a mode" Revert "drm/i915: Allow LVDS on pipe A on gen4+" Revert "drm/i915: Enable RC6 on Ironlake."
2010-09-10Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: Range check cpu in blk_cpu_to_group scatterlist: prevent invalid free when alloc fails writeback: Fix lost wake-up shutting down writeback thread writeback: do not lose wakeup events when forking bdi threads cciss: fix reporting of max queue depth since init block: switch s390 tape_block and mg_disk to elevator_change() block: add function call to switch the IO scheduler from a driver fs/bio-integrity.c: return -ENOMEM on kmalloc failure bio-integrity.c: remove dependency on __GFP_NOFAIL BLOCK: fix bio.bi_rw handling block: put dev->kobj in blk_register_queue fail path cciss: handle allocation failure cfq-iosched: Documentation help for new tunables cfq-iosched: blktrace print per slice sector stats cfq-iosched: Implement tunable group_idle cfq-iosched: Do group share accounting in IOPS when slice_idle=0 cfq-iosched: Do not idle if slice_idle=0 cciss: disable doorbell reset on reset_devices blkio: Fix return code for mkdir calls
2010-09-10drm/i915: don't enable self-refresh on IronlakeJesse Barnes
We don't know how to enable it safely, especially as outputs turn on and off. When disabling LP1 we also need to make sure LP2 and 3 are already disabled. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29173 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29082 Reported-by: Chris Lord <chris@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@kernel.org Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-09Merge branch 'vhost-net' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
2010-09-09ipheth: remove incorrect devtype to WWANDan Williams
The 'wwan' devtype is meant for devices that require preconfiguration and *every* time setup before the ethernet interface can be used, like cellular modems which require a series of setup commands on serial ports or other mechanisms before the ethernet interface will handle packets. As ipheth only requires one-per-hotplug pairing setup with no preconfiguration (like APN, phone #, etc) and the network interface is usable at any time after that initial setup, remove the incorrect devtype wwan. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata-sff: Reenable Port Multiplier after libata-sff remodeling. libata: skip EH autopsy and recovery during suspend ahci: AHCI and RAID mode SATA patch for Intel Patsburg DeviceIDs ata_piix: IDE Mode SATA patch for Intel Patsburg DeviceIDs libata,pata_via: revert ata_wait_idle() removal from ata_sff/via_tf_load() ahci: fix hang on failed softreset pata_artop: Fix device ID parity check
2010-09-09libata-sff: Reenable Port Multiplier after libata-sff remodeling.Gwendal Grignou
Keep track of the link on the which the current request is in progress. It allows support of links behind port multiplier. Not all libata-sff is PMP compliant. Code for native BMDMA controller does not take in accound PMP. Tested on Marvell 7042 and Sil7526. Signed-off-by: Gwendal Grignou <gwendal@google.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-09-09libata: skip EH autopsy and recovery during suspendTejun Heo
For some mysterious reason, certain hardware reacts badly to usual EH actions while the system is going for suspend. As the devices won't be needed until the system is resumed, ask EH to skip usual autopsy and recovery and proceed directly to suspend. Signed-off-by: Tejun Heo <tj@kernel.org> Tested-by: Stephan Diestelhorst <stephan.diestelhorst@amd.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-09-09ahci: AHCI and RAID mode SATA patch for Intel Patsburg DeviceIDsSeth Heasley
This patch adds the Intel Patsburg (PCH) SATA AHCI and RAID Controller DeviceIDs. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 19:15:10 +0000