summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-09-15Staging: rtl8192e: fix lots of sparse warningsGreg Kroah-Hartman
This removes a number of static and extern warnings that sparse complains about. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: add Realtek 8192 PCI wireless driverGreg Kroah-Hartman
This wireless driver should work for the Realtek 8192 PCI devices. It comes directly from Realtek and has been tested to work on at least one laptop in the wild. Cc: Anthony Wong <awong1@novell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: pohmelfs: sync with the development treeEvgeniy Polyakov
* cache coherency protocol fix * proper timeout handling * implement dump/del all config group command (Signed-off-by: Pierpaolo Giacomin <yrz@anche.no>) Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: agnx: remove flush_workqueue()Alexander Beregalov
mac80211 already does flush_workqueue() at stop/start and suspend\resume. (fix build error) Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: comedi: apci3200: fix test of ui_DelayTime range in ↵Roel Kluin
i_APCI3200_CommandTestAnalogInput() For ui_DelayTime to be less than 1 and greater than 1023 is logically impossible. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: rspiusb: Check usb_buffer_map_sg() retvalRoel Kluin
usb_buffer_map_sg() may return -1, check this directly. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Reviewed-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: panel: Add support for TI CLCD interfaceSudhakar Rajashekhara
On TI DA850/OMAP-L138 EVM, HD44780 (24x2) LCD panel is being used[1], but it is interfaced through the SoC specific LCD interface and not through parallel port. A parallel port driver has been developed which interfaces to the panel driver through the SoC specific LCD interface. Basically, both the serial and parallel interfaces supported by the panel driver do not suit the specific interface SoC is supporting so, a new interface type has been introduced. Ideally the panel driver should be de-coupled from parallel and serial port related items but this patch is something that can be merged in the meantime. [1]Specification of the character LCD interface on TI DA850/OMAP-L138: http://www.ti.com/litv/pdf/sprufm0a. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: kill off the TXDMA CSR typeAlan Cox
Go to a u32 and masks Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: kill off the TXDMA error typeAlan Cox
This isn't actually used properly anyway Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: re-order the initpci code to match usual Linux styleAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: prune all the debug codeAlan Cox
We don't need it, we have a perfectly good set of debug tools. For this pass keep a few debug printks around which are "should not happen" items Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: kill the loopback typeAlan Cox
Kill off the loopback type in the driver Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: kill MSI typeAlan Cox
Kill off the MSI structure Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: put the jagcore routines in with their usersAlan Cox
We have two trivial IRQ routines, a single statement and a real function - relocate them. While we are at it kill the trivial to sort out soft reset and slv bits in the same areas of code. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: kill the interrupt magic define and typesAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: clean up MP_FLAG macrosAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: clean up DMA10/DMA4 typesAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: clean up PM_CSR_tAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: kill the Q_ADDR structAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: quick tidy of the debug codeAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: clean up MMC_SRAM_Alan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: sort out the mmc enable routineAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: eeprom remove featuresAlan Cox
We only read eeprom id 0, in byte mode - so the rest can go away Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: remove unused PCI identifiersAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: continue pruning unused fieldsAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: de-hungarianise a bitAlan Cox
bOverrideAddress is write only so kill it rather than fix it Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: fold the diet config into the other codeAlan Cox
No point having a file just for that Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: config is already zeroedAlan Cox
Adapter was cleared by netdev allocation so any zero defaults do not need writing. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: attack the config stuffAlan Cox
Prune this back as most of it isn't relevant or used Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: clean up constant rx/tx registry fieldsAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: eliminate write only registry fieldsAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: Eliminate RegistryDMA CacheAlan Cox
One writer, of a constant, one user .. it can go. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: CSRAddress to regsAlan Cox
Switch this to a Linux like naming as it occurs all over. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: Take a kref for the PCI pointer we cacheAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: kill copied PCI fieldsAlan Cox
They are all in the pcidev anyway plus are not used by the code Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: MPSend macrosAlan Cox
Most are unused, one is used and can be replaced with the definition Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging et131x: kill refcountAlan Cox
The RefCount field is accessed only by a macro and the only use of it in the tree is to read it, so it can go Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: kill unused RCV_REF macrosAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: power stateAlan Cox
This is assigned once to ndis d0, and then never changes so it is a constant and we can zap it Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et131x: spinlocksAlan Cox
Switch to the more normal "flags" naming. Also fix up the nested use of spin_lock_irqsave Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: et1310: kill pAdapter in favour of a sane nameAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: pohmelfs: fix type errorsAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: pohmelfs: fix atomic type spewAlan Cox
atomic_long != atomic Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: altpciechdma: 64bit type warning fixAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: iio: fix duplicate dev_attr_nameRandy Dunlap
device attr's should be static, otherwise duplicate identifiers are created: drivers/staging/iio/trigger/iio-trig-gpio.o:(.data+0x1c): multiple definition of `dev_attr_name' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: iio: Fix type warningsAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: IIO: Add todo list for stagingJonathan Cameron
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: IIO: Initial documentationJonathan Cameron
This needs considerably more work, all comments / suggestions welcomed. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: IIO: Proof of concept gpio triggerJonathan Cameron
Simple example of how a gpio trigger driver would work. Things to be added include interupt type control (high, low). Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: IIO: Periodic timer based triggerJonathan Cameron
The original posting of this driver led to a discussion in which it was commented that a better system was needed for dealing with the many possible periodic interrupt sources available on some SoCs. Unfortunately that is a big task and as far as I know, no-one has taken it on as yet. So in the meantime this driver is still in here. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 13:36:05 +0000