summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2014-05-29wil6210: inline functions for vring hi/lo watermarksVladimir Kondratiev
Provide clear definition of the watermarks for the vring descriptor space. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29wil6210: limit fw error recovery attemptsVladimir Kondratiev
In case there is something fundamentally wrong with the firmware (example: RF cable disconnected), FW will always crash immediately after reset. This leads to infinite fw error recovery loop. Count consecutive unsuccessful error recovery attempts in a short period of time, and stop doing recovery after some reasonable count. It is still possible to manually reset fw doing interface down/up sequence. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29wil6210: limit MTUVladimir Kondratiev
Obey 802.11 spec that defines max. data size 7920 bytes Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29ath9k: Fix deadlock while updating p2p beacon timerRajkumar Manoharan
pm_lock is taken twice while syncing HW TSF of p2p vif. Fix this by taking the lock at caller side. Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29brcmfmac: remove firmware list from USB driverArend van Spriel
The USB driver was using a list for firmware info that was used in suspend/resume scenario. Now that brcmfmac is using the asynchronous firmware request this is no longer needed. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29brcmfmac: Remove interrupt endpoint usage from USB driver.Hante Meuleman
The USB bus driver always configured an USB intr EP urb. The driver did not use the result at all and with newer firmware it is causing continues errors on this EP. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29brcmfmac: Increase max buffer size for receiving control message from dongleDaniel Kim
The max buffer size for receiving control message from dongle needs to be increased considering possible block padding. Otherwise some big control message can't be received due to buffer overrun check. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Daniel Kim <dekim@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29brcmutil: assure unused bits are cleared in 11n chanspecArend van Spriel
The firmware channel specification is a bitfield using a 16-bit integer, but only 14 lsb are used. Upon encoding this value assure all 16 bits are cleared. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29brcmfmac: make brcmf_fw_nvram_strip() staticArend van Spriel
The function brcmf_fw_nvram_strip() is no longer called so it does not need to be exposed. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29brcmfmac: use asynchronous firmware request in USBArend van Spriel
This patch adds use of asynchronous firmware request to the driver USB layer. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29brcmfmac: use asynchronous firmware request in SDIOArend van Spriel
This patch adds use of asynchronous firmware request to the driver SDIO layer. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29brcmfmac: introduce asynchronous firmware loadingArend van Spriel
The driver needs firmware to be loaded to the device, which is done through the firmware class API. The synchronous call request_firmware() need root filesystem to be mounted and/or user-mode helper. These may not be avaliable on the moment it is called. Instead use request_firmware_nowait(). Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29brcmfmac: Add log of superspeed device detection to USB probe.Hante Meuleman
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29brcmfmac: rework usb callback operationsArend van Spriel
The resume callbacks do partly the same a the probe callback so put common code in separate function for use in the callbacks. This also fixes suspend/resume regression introduced by brcmfmac: remove .init() callback for internal bus interface The .init() callback was the first function called by the common bus function brcmf_bus_start(). Given that it is not really necessary and the bus layer can call it before calling the brcmf_bus_start() function. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29brcmfmac: call brcmf_detach() unconditional in sdio .remove() callbackArend van Spriel
The function brcmf_detach() checks whether it needs to do his stuff or can return immediately. No need to have the same check in the calling code. Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29brcmfmac: rename nvram.[ch] for upcoming firmware handling functionsArend van Spriel
The firmware processing will be modified to use asynchronous request firmware api. In preparation this patch is simple rename of source and header file to which the functionality will be added. Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29brcmfmac: remove .init() callback for internal bus interfaceArend van Spriel
The .init() callback was the first function called by the common bus function brcmf_bus_start(). Given that it is not really necessary and the bus layer can call it before calling the brcmf_bus_start() function. Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29brcmfmac: make chandef_to_chanspec() function staticArend van Spriel
The function chandef_to_chanspec() was added by brcmfmac: determine chanspec from struct cfg80211_chan_def info The struct cfg80211_chan_def contains additional info to derive the bandwidth and side-band information of the chanspec. This patch adds chandef_to_chanspec() function used in IBSS join and starting AP operation. However, it introduced a sparse warning because the function is only called from within the source file wl_cfg80211.c. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29brcmfmac: restore mpc before passing scan status to cfg80211Arend van Spriel
Before informing cfg80211 about the scan status the device should be put back in mpc state. If done after user-space may initiate another (scheduled) scan and fail because scan is still busy as shown in logging below: [ 3301.367376] brcmfmac: brcmf_fweh_event_worker event ESCAN_RESULT (69) [ 3301.377305] brcmfmac: brcmf_fweh_event_worker version 2 flags 0 status 0 [ 3301.384993] brcmutil: event payload, len=12 [ 3301.389208] 00000000: 0c 00 00 00 6d 00 00 00 34 12 00 00 [ 3301.389214] brcmfmac: brcmf_sdio_kso_control Enter: on=0 [ 3301.402196] brcmfmac: brcmf_inform_bss scanned AP count (0) [ 3301.407808] brcmfmac: brcmf_notify_escan_complete Enter [ 3301.413064] brcmfmac: brcmf_notify_escan_complete ESCAN Completed scan: Done [ 3301.420137] brcmfmac: brcmf_sdio_bus_txctl Enter [ 3301.420368] brcmfmac: brcmf_cfg80211_sched_scan_start Enter [ 3301.420370] brcmfmac: brcmf_cfg80211_sched_scan_start: Scanning already: status (1) [ 3301.440190] brcmfmac: brcmf_sdio_kso_control Enter: on=1 [ 3301.448695] brcmfmac: brcmf_sdio_tx_ctrlframe Enter [ 3301.453662] brcmfmac: brcmf_sdio_bus_rxctl Enter [ 3301.458326] brcmfmac: brcmf_sdio_isr Enter [ 3301.462523] brcmfmac: brcmf_sdio_dpc Enter [ 3301.466632] brcmfmac: brcmf_sdio_readframes Enter [ 3301.471431] brcmfmac: brcmf_sdio_read_control Enter [ 3301.476340] brcmfmac: brcmf_set_mpc MPC : 1 Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29brcmfmac: reduce log level for invalid scheduled scan requestArend van Spriel
When a regular scan does not return any networks user-space does request a scheduled scan without any matchset or ssid. This can not be handled by the firmware so we return -EINVAL. However, as this request is done let us not add an error message to the log. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29wcn36xx: Use kmemdup instead of kmalloc + memcpyBenoit Taine
This issue was reported by coccicheck using the semantic patch at scripts/coccinelle/api/memdup.cocci Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29mwifiex: use time_after()Manuel Schölling
To be future-proof and for better readability the time comparisons are modified to use time_after() instead of plain, error-prone math. Signed-off-by: Manuel Schölling <manuel.schoelling@gmx.de> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29at76c50x-usb: Make WEP encryption working.Andrea Merello
Currently the driver uses HW encryption. Whenever mac80211 calls the set_key() callback the driver restarts the whole HW configuration procedure, in order to set (also) the new WEP key. However, by doing this, it causes the card to loose association information, and the HW becomes unable to communicate with the BSS. This patch adds support for sending another HW command, that sets only the wep key, instead of resetting all. Mac80211 key-set requests are thus handled via this new command. Tested on my at76c503 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29at76c50x-usb: Don't perform DMA from stack memoryAndrea Merello
Loading the driver with DMA debugging enabled makes the kernel to complain about the ehci driver trying to perform DMA from memory from the stack. [ 9848.229514] WARNING: CPU: 1 PID: 627 at lib/dma-debug.c:1153 check_for_stack+0xa4/0xf0() [ 9848.237678] ehci-pci 0000:00:04.1: DMA-API: device driver maps memory fromstack [addr=ffff88006c80da01] This is due to at76c50x-usb driver passing buffers allocated on the stack to the USB layer, that attempts DMA. This occurs is several places. This patch fixes the problem by allocating those buffers via kmalloc. Since this adds some kfree() before leaving a couple of functions, I caught the occasion to clean-up the exit path on error. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29ath9k: avoid passing buffers to the hardware during flushFelix Fietkau
The commit "ath9k: fix possible hang on flush" changed the receive code to always link rx descriptors of processed frames, even when flushing. In some cases, this leads to flushed rx buffers being passed to the hardware while rx is already stopped. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29ath9k: simplify DFS pulse interval debug printingZefir Kurtisi
Make DFS pulse interval calculation independent from CONFIG_ATH9K_DEBUGFS. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29rsi: avoid format string leak to thread nameKees Cook
Since the rsi_create_kthread interface does not include any format string arguments, make sure that the resulting thread name can never accidentally process the name as a format string. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29Merge branch 'for-upstream' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Conflicts: drivers/bluetooth/btusb.c
2014-05-27Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-05-22mwifiex: use 'const' qualifier for 2nd arg of mwifiex_tdls_add_ht_operJohn W. Linville
Fixes the following warning: CC drivers/net/wireless/mwifiex/tdls.o drivers/net/wireless/mwifiex/tdls.c: In function ‘mwifiex_prep_tdls_encap_data’: drivers/net/wireless/mwifiex/tdls.c:475:4: warning: passing argument 2 of ‘mwifiex_tdls_add_ht_oper’ discards ‘const’ qualifier from pointer target type [enabled by default] ret = mwifiex_tdls_add_ht_oper(priv, peer, 1, skb); ^ drivers/net/wireless/mwifiex/tdls.c:190:1: note: expected ‘u8 *’ but argument is of type ‘const u8 *’ mwifiex_tdls_add_ht_oper(struct mwifiex_private *priv, u8 *mac, ^ drivers/net/wireless/mwifiex/tdls.c:481:4: warning: passing argument 2 of ‘mwifiex_tdls_add_ht_oper’ discards ‘const’ qualifier from pointer target type [enabled by default] ret = mwifiex_tdls_add_ht_oper(priv, peer, 0, skb); ^ drivers/net/wireless/mwifiex/tdls.c:190:1: note: expected ‘u8 *’ but argument is of type ‘const u8 *’ mwifiex_tdls_add_ht_oper(struct mwifiex_private *priv, u8 *mac, ^ Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22ath9k: fix sleep timer during suspendRajkumar Manoharan
On idle state, sleep timer is scheduled to put the chip into fullsleep. But during suspend, this timer is scheduled after the chip is moved to fullsleep forcibily. This is causing below unnecessary error messages in kernel log during suspend. ath: phy2: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 ath: phy2: RX failed to go idle in 10 ms RXSM=0xdeadbeef ath: phy2: DMA failed to stop in 10 ms AR_CR=0xdeadbeef AR_DIAG_SW=0xdeadbeef DMADBG_7=0xdeadbeef Reported-by: Arkh4mKn1ght <arkh4mkn1ght@gmail.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22ath9k: Handle multiple keys while setting tx filtersRajkumar Manoharan
The keycache index is used to abort transmission for given station when it goes to sleep state. But the commit "ath9k_hw: Abort transmission for sleeping station" is not handling multi-key station. Fix that. Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22mwifiex: update seq number correctly for packets from TDLS peerAvinash Patil
This patch adds handling of updating rx sequence number for packets received from TDLS peer. Current implementation of mwifiex_queueing_ra_based assumes station would always receive packets from AP which is not true in case of TDLS. Fix this by adding this case. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22mwifiex: set TDLS flags for AMSDU packetsAvinash Patil
This patch fixes an issue where AMSDU packets for TDLS link would flow over infra link. This happened because we were missing setting TDLS flag in TxPD on AMSDU packets. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22mwifiex: delete TDLS link upon Teardown eventAvinash Patil
If userspace application does not take care of TDLS teardown event, TDLS link would be present in driver database and thus driver would send such packets on direct link while peer has already severed link causing data traffic failure. Disable TDLS link upon teardown event so as to ensure this does not happen. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22mwifiex: silence TDLS link delete failure for nonexistent linkAvinash Patil
If TDLS link delete command fails because of non-existent peer or TDLS peer is absent from driver's entry, it means link was already deleted. In such case print debug messages with lower severity. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22mwifiex: avoid TDLS check for packets destined to APAvinash Patil
In station role if TDLS is supported, we traverse TDLS peer list to see if packet's destination address matches with TDLS peer. Packets destined to AP are not sent over TDLS link and hence avoid this list traversal for such packets. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22ath9k: fix build error with disabled debugZefir Kurtisi
DFS pulse interval printing is only available when CONFIG_ATH9K_DEBUGFS is set. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22b43: N-PHY: add missing calib values for radio 0x2026 rev 11Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22b43: fix list of 5 GHz channels for 802.11n cardsRafał Miłecki
Broadcom hardware uses a bit tricky hw_value-s for 5 GHz channels, values 184-228 are used for 4920-5140 MHz center frequencies. Normally you expect channels 7-16 (e.g. 5060 MHz is channel 12, not 212). We never meant to register hw_value 228 with freq 6140 MHz (5000 + 228 * 5). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22b43: fix typo in define name for 2 GHz channels (s/CHAN4G/CHAN2G/)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22libertas: fix return value when processing invalid packetDan Williams
Nothing actually uses the return value yet, but we might as well make it correct, like process_rxed_802_11_packet() does for the same case. Also ensure that if monitor mode is enabled (and thus process_rxed_802_11_packet() is called) that the debugging enter/leave functions are balanced. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22rt2x00: Endless loop on hub port power downRichard Genoud
I've met an endless (or at least very long) loop if I power down the usb port on witch a usb wifi key is plugged. (Ok, it's not very smart to power down a usb port when a usb key is in used... but still, I think that should not lead to an endless loop). I have a lot of: ieee80211 phy1: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0438 with error -71 (-71==-EPROTO) How to reproduce: - plug an usb wifi key - ip link set wlan0 up - hub-ctrl -b usb_bus -d usb_device -P usb_port -p 0 hub-ctrl source: https://github.com/codazoda/hub-ctrl.c/blob/master/hub-ctrl.c The following patch prevents the endless loop, but I'm really not sure that The Right Way To Do It (R) Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22carl9170: fix leaks at failure path in carl9170_usb_probe()Alexey Khoroshilov
carl9170_usb_probe() does not handle request_firmware_nowait() failure that leads to several leaks in this case. The patch adds all required deallocations. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2014-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJohn W. Linville
2014-05-22Merge tag 'nfc-next-3.16-1' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel Ortiz <sameo@linux.intel.com> says: "NFC: 3.16: First pull request This is the NFC pull request for 3.16. We have: - STMicroeectronics st21nfca support. The st21nfca is an HCI chipset and thus relies on the HCI stack. This submission provides support for tag redaer/writer mode (including Type 5) and device tree bindings. - PM runtime support and a bunch of bug fixes for TI's trf7970a. - Device tree support for NXP's pn544. Legacy platform data support is obviously kept intact. - NFC Tag type 4B support to the NFC Digital stack. - SOCK_RAW type support to the raw NFC socket, and allow NCI sniffing from that. This can be extended to report HCI frames and also proprietarry ones like e.g. the pn533 ones." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2014-05-22iwlwifi: mvm: remove vif argument from power_update_macArik Nemtsov
The power update function looks at all current vifs to determine the power policy. It doesn't use the current vif. Instead the value was overwritten and used internally. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-22iwlwifi: mvm: make iwl_mvm_update_beacon_abort staticEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 20:59:47 +0000