summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-08-31net: dsa: ocelot: use the Lynx PCS helpers in Felix and SevilleIoana Ciornei
Use the helper functions introduced by the newly added Lynx PCS MDIO module in the Felix VSC9959 and Seville VSC9953. Instead of representing the PCS as a phy_device, a mdio_device structure will be passed to the Lynx module which is now actually implementing all the PCS configuration and status reporting. All code previously used for PCS monitoring and runtime configuration is removed and replaced will calls to the Lynx PCS operations. Tested on the following SERDES protocols of LS1028A: 0x7777 (2500Base-X), 0x85bb (QSGMII), 0x9999 (SGMII) and 0x13bb (USXGMII). Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net: phy: add Lynx PCS moduleIoana Ciornei
Add a Lynx PCS module which exposes the necessary operations to drive the PCS using phylink. The majority of the code is extracted from the Felix DSA driver, which will be also modified in a later patch, and exposed as a separate module for code reusability purposes. As such, this aims at feature and bug parity with the existing Felix DSA driver, and thus USXGMII, SGMII, QSGMII and 2500Base-X (only w/o in-band AN) are supported by the Lynx PCS module since these were also supported by Felix. The module can only be enabled by the drivers in need and not user selectable. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net: phylink: consider QSGMII interface mode in phylink_mii_c22_pcs_get_stateIoana Ciornei
The same link partner advertisement word is used for both QSGMII and SGMII, thus treat both interface modes using the same phylink_decode_sgmii_word() function. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net: phylink: add helper function to decode USXGMII wordIoana Ciornei
With the new addition of the USXGMII link partner ability constants we can now introduce a phylink helper that decodes the USXGMII word and populates the appropriate fields in the phylink_link_state structure based on them. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net/wan/fsl_ucc_hdlc: Add MODULE_DESCRIPTIONYueHaibing
Add missing MODULE_DESCRIPTION. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net: hns: Remove unused macro AE_NAME_PORT_ID_IDXYueHaibing
There is no caller in tree. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net: dl2k: Remove unused macro DRV_NAMEYueHaibing
There is no caller in tree any more. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net: wan: slic_ds26522: Remove unused macro DRV_NAMEYueHaibing
There is no caller in tree any more. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net: ethernet: ti: am65-cpts: fix i2083 genf (and estf) Reconfiguration IssueGrygorii Strashko
The new bit TX_GENF_CLR_EN has been added in AM65x SR2.0 to fix i2083 errata, which can be just set unconditionally for all SoCs. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31sfc: return errors from efx_mcdi_set_id_led, and de-indirectEdward Cree
W=1 warnings indicated that 'rc' was unused in efx_mcdi_set_id_led(); change the function to return int instead of void and plumb the rc through the caller efx_ethtool_phys_id(). Since (post-Falcon) all sfc NICs use MCDI for this, there's no point in indirecting through a nic_type method, so remove that and just call efx_mcdi_set_id_led() directly. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31sfc: fix kernel-doc on struct efx_loopback_stateEdward Cree
Missing 'struct' keyword caused "cannot understand function prototype" warnings. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31sfc: fix unused-but-set-variable warning in efx_farch_filter_remove_safeEdward Cree
Thanks to some past refactor, 'spec' is not actually used in this function; the code using it moved to the callee efx_farch_filter_remove. Remove the variable to fix a W=1 warning. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31sfc: fix W=1 warnings in efx_farch_handle_rx_not_okEdward Cree
Some of these RX-event flags aren't used at all, so remove them. Others are used only #ifdef DEBUG to log a message; suppress the unused-var warnings #ifndef DEBUG with a void cast. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31gtp: relax alloc constraint when adding a pdpNicolas Dichtel
When a PDP context is added, the rtnl lock is held, thus no need to force a GFP_ATOMIC. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31gtp: remove useless rcu_read_lock()Nicolas Dichtel
The rtnl lock is taken just the line above, no need to take the rcu also. Fixes: 1788b8569f5d ("gtp: fix use-after-free in gtp_encap_destroy()") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net: phylink: avoid oops during initialisationRussell King
If we intend to use PCS operations, mac_pcs_get_state() will not be implemented, so will be NULL. If we also intend to register the PCS operations in mac_prepare() or mac_config(), then this leads to an attempt to call NULL function pointer during phylink_start(). Avoid this, but we must report the link is down. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31hinic: add support to query function tableLuo bin
add debugfs node for querying function table, for example: cat /sys/kernel/debug/hinic/0000:15:00.0/func_table/valid Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31hinic: add support to query rq infoLuo bin
add debugfs node for querying rq info, for example: cat /sys/kernel/debug/hinic/0000:15:00.0/RQs/0x0/rq_hw_pi Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31hinic: add support to query sq infoLuo bin
add debugfs node for querying sq info, for example: cat /sys/kernel/debug/hinic/0000:15:00.0/SQs/0x0/sq_pi Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28ionic: pull reset_queues into tx_timeout handlerShannon Nelson
Convert tx_timeout handler to not do the full reset. As this was the last user of ionic_reset_queues(), we can drop it. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28ionic: change queue count with no resetShannon Nelson
Add to our new ionic_reconfigure_queues() to also be able to change the number of queues in use, and to change the queue interrupt layout between split and combined. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28ionic: change the descriptor ring length without full resetShannon Nelson
The original way of changing ring length was to completely tear down the lif's queue structure and then rebuild it, while running the risk of allocations that might fail in the middle and leave us with a broken driver. Instead, we can set up all the new queue and descriptor allocations first, then swap them out and delete the old allocations. If the new allocations fail, we report the error, stay with the old setup and continue running. This gives us a safer path, and a smaller window of time where we're not processing traffic. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28ionic: change mtu without full queue rebuildShannon Nelson
We really don't need to tear down and rebuild the whole queue structure when changing the MTU; we can simply stop the queues, clean and refill, then restart the queues. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28ionic: use index not pointer for queue trackingShannon Nelson
Use index counters rather than pointers for tracking head and tail in the queues to save a little memory and to perhaps slightly faster queue processing. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28ionic: reduce contiguous memory allocation requirementShannon Nelson
Split out the queue descriptor blocks into separate dma allocations to make for smaller blocks. Co-developed-by: Neel Patel <neel@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28ionic: clean up unnecessary non-static functionsShannon Nelson
ionic_open() and ionic_stop() are not referenced outside of their defining file, so make them static. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28ionic: rework and simplify handling of the queue stats blockShannon Nelson
Use a block of stats structs attached to the lif instead of little ones attached to each qcq. This simplifies our memory management and gets rid of a lot of unnecessary indirection. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28ionic: remove lif list conceptShannon Nelson
As we aren't yet supporting multiple lifs, we can remove complexity by removing the list concept and related code, to be re-engineered later when actually needed. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28ionic: use kcalloc for new arraysShannon Nelson
Use kcalloc for allocating arrays of structures. Following along after commit e71642009cbdA ("ionic_lif: Use devm_kcalloc() in ionic_qcq_alloc()") there are a couple more array allocations that can be converted to using devm_kcalloc(). Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28ionic: fix up a couple of debug stringsShannon Nelson
Fix the queue name displayed. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28ionic: set MTU floor at ETH_MIN_MTUShannon Nelson
The NIC might tell us its minimum MTU, but let's be sure not to use something smaller than ETH_MIN_MTU. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28net: phy: DP83822: Add ability to advertise Fiber connectionDan Murphy
The DP83822 can be configured to use a Fiber connection. The strap register is read to determine if the device has been configured to use a fiber connection. With the fiber connection the PHY can be configured to detect whether the fiber connection is active by either a high signal or a low signal. Fiber mode is only applicable to the DP83822 so rework the PHY match table so that non-fiber PHYs can still use the same driver but not call or use any of the fiber features. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28smsc95xx: add phylib supportAndre Edich
Generally, each PHY has their own configuration and it can be done through an external PHY driver. The smsc95xx driver uses only the hard-coded internal PHY configuration. This patch adds phylib support to probe external PHY drivers for configuring external PHYs. The MDI-X configuration for the internal PHYs moves from drivers/net/usb/smsc95xx.c to drivers/net/phy/smsc.c. Signed-off-by: Andre Edich <andre.edich@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28smsc95xx: use usbnet->driver_privAndre Edich
Using `void *driver_priv` instead of `unsigned long data[]` is more straightforward way to recover the `struct smsc95xx_priv *` from the `struct net_device *`. Signed-off-by: Andre Edich <andre.edich@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28smsc95xx: remove redundant function argumentsAndre Edich
This patch removes arguments netdev and phy_id from the functions smsc95xx_mdio_read_nopm and smsc95xx_mdio_write_nopm. Both removed arguments are recovered from a new argument `struct usbnet *dev`. Signed-off-by: Andre Edich <andre.edich@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28Merge tag 'mac80211-next-for-davem-2020-08-28' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This time we have: * some code to support SAE (WPA3) offload in AP mode * many documentation (wording) fixes/updates * netlink policy updates, including the use of NLA_RANGE with binary attributes * regulatory improvements for adjacent frequency bands * and a few other small additions/refactorings/cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27gtp: add notification mechanismNicolas Dichtel
Like all other network functions, let's notify gtp context on creation and deletion. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: Gabriel Ganne <gabriel.ganne@6wind.com> Acked-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27s390/qeth: strictly order bridge address eventsJulian Wiedmann
The current code for bridge address events has two shortcomings in its control sequence: 1. after disabling address events via PNSO, we don't flush the remaining events from the event_wq. So if the feature is re-enabled fast enough, stale events could leak over. 2. PNSO and the events' arrival via the READ ccw device are unordered. So even if we flushed the workqueue, it's difficult to say whether the READ device might produce more events onto the workqueue afterwards. Fix this by 1. explicitly fencing off the events when we no longer care, in the READ device's event handler. This ensures that once we flush the workqueue, it doesn't get additional address events. 2. Flush the workqueue after disabling the events & fencing them off. As the code that triggers the flush will typically hold the sbp_lock, we need to rework the worker code to avoid a deadlock here in case of a 'notifications-stopped' event. In case of lock contention, requeue such an event with a delay. We'll eventually aquire the lock, or spot that the feature has been disabled and the event can thus be discarded. This leaves the theoretical race that a stale event could arrive _after_ we re-enabled ourselves to receive events again. Such an event would be impossible to distinguish from a 'good' event, nothing we can do about it. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27s390/qeth: unify structs for bridge port stateJulian Wiedmann
The data returned from IPA_SBP_QUERY_BRIDGE_PORTS and IPA_SBP_BRIDGE_PORT_STATE_CHANGE has the same format. Use a single struct definition for it. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27s390/qeth: copy less data from bridge state eventsJulian Wiedmann
Current code copies _all_ entries from the event into a worker, when we later only need specific data from the first entry. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27s390/qeth: don't let HW override the configured port roleJulian Wiedmann
The only time that our Bridgeport role should change is when we change the configuration ourselves. In which case we also adjust our internal state tracking, no need to do it again when we receive the corresponding event. Removing the locked section helps a subsequent patch that needs to flush the workqueue while under sbp_lock. It would be nice to raise a warning here in case HW does weird things after all, but this could end up generating false-positives when we change the configuration ourselves. Suggested-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27s390/qeth: don't disable address events during initializationJulian Wiedmann
A newly initialized device is disabled for address events, there's no need to explicitly disable them. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27s390/qeth: make queue lock a proper spinlockJulian Wiedmann
queue->state is a ternary spinlock in disguise, used by OSA's TX completion path to lock the Output Queue and flush any pending packets on it to the device. If the Queue is already locked by our TX code, setting the lock word to QETH_OUT_Q_LOCKED_FLUSH lets the TX completion code move on - the TX path will later take care of things when it unlocks the Queue. This sort of DIY locking is a non-starter of course, just let the TX completion path block on the spinlock when necessary. If that ends up causing additional latency due to lock contention, then converting the OSA path to use xmit_more is the right way to go forward. Also slightly expand the locked section and capture all of qeth_do_send_packet(), so that the update for the 'bufs_pack' statistics is done race-free. While reworking the TX completion path's code, remove a barrier() that doesn't make any sense. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27s390/qeth: use to_delayed_work()Julian Wiedmann
Avoid poking around in the delayed_work struct's internals. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27s390/qeth: clean up qeth_l3_send_setdelmc()'s declarationJulian Wiedmann
Clarify that the 'ipacmd' parameter is an enum, and thus compatible to what qeth_ipa_alloc_cmd() expects as input. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27net: phy: Sort Kconfig and MakefileAndrew Lunn
Sort the Kconfig based on the text shown in make menuconfig and sort the Makefile by CONFIG symbol. Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27net: mdio: Move MDIO drivers into a new subdirectoryAndrew Lunn
Move all the MDIO drivers and multiplexers into drivers/net/mdio. The mdio core is however left in the phy directory, due to mutual dependencies between the MDIO core and the PHY core. Take this opportunity to sort the Kconfig based on the menuconfig strings, and move the multiplexers to the end with a separating comment. v2: Fix typo in commit message Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27net: xgene: Move shared header file into include/linuxAndrew Lunn
This header file is currently included into the ethernet driver via a relative path into the PHY subsystem. This is bad practice, and causes issues for the upcoming move of the MDIO driver. Move the header file into include/linux to clean this up. v2: Move header to include/linux/mdio Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27net/phy/mdio-i2c: Move header file to include/linux/mdioAndrew Lunn
In preparation for moving all MDIO drivers into drivers/net/mdio, move the mdio-i2c header file into include/linux/mdio so it can be used by both the MDIO driver and the SFP code which instantiates I2C MDIO busses. v2: Add include/linux/mdio Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27net: pcs: Move XPCS into new PCS subdirectoryAndrew Lunn
Create drivers/net/pcs and move the Synopsys DesignWare XPCS into the new directory. Move the header file into a subdirectory include/linux/pcs Start a naming convention of all PCS files use the prefix pcs-, and rename the XPCS files to fit. v2: Add include/linux/pcs v4: Fix include path in stmmac. Remove PCS_DEVICES to avoid new prompts Cc: Jose Abreu <Jose.Abreu@synopsys.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 19:11:37 +0000