summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-12-29[media] lirc_dev: add some __user annotationsDan Carpenter
Sparse complains because there are no __user annotations. drivers/media/rc/lirc_dev.c:156:27: warning: incorrect type in initializer (incompatible argument 2 (different address spaces)) drivers/media/rc/lirc_dev.c:156:27: expected int ( *read )( ... ) drivers/media/rc/lirc_dev.c:156:27: got int ( extern [toplevel] *<noident> )( ... ) Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc-core: fix some leftovers from the renaming patchesDavid Härdeman
Fix some minor comments etc which are leftover from the old naming scheme. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] bttv: merge ir decoding timersDavid Härdeman
Similarly to saa7134, bttv_ir has two timers, only one of which is used at a time and which serve the same purpose. Merge them. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] bttv: rename struct card_ir to bttv_irDavid Härdeman
bttv_ir is more consistent with all other structs used in the same driver. Also, clean up the struct to remove commented out members and the work_struct which is unused. [mchehab@redhat.com: fix a warning at bttv_rc5_timer_end] Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] saa7134: merge saa7134_card_ir->timer and saa7134_card_ir->timer_endDavid Härdeman
Both timers are used for a similar purpose. Merging them allows for some minor simplifications. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] saa7134: some minor cleanupsDavid Härdeman
Mostly using appropriate data types and constants (e.g. int -> bool). Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] saa7134: use full keycode for BeholdTVDavid Härdeman
Using the full keycode for BeholdTV hardware makes another module parameter unnecessary. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] saa7134: remove unused module parameterDavid Härdeman
ir_rc5_remote_gap is a leftover from ir-common, remove it. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] pwc: failure to submit an urb is a fatal errorHans de Goede
Failure to submit an urb is a fatal error, make isoc_init return an error when this happens rather then only log it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] pwc: Also set alt setting to alt0 when no error occuredHans de Goede
isoc_cleanup contains a check to not set the altsetting to alt0 when the device was unplugged, but the check currently is buggy, and causes the alt setting to only be set to 0 if an error occured while streaming. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] pwc: do not start isoc stream on /dev/video openHans de Goede
pwc was starting streaming on /dev/video# open rather then on STREAM_ON. Now that the v4l1 compat code is removed from the pwc driver there is no reason left to do this. So this patch changes the pwc driver to delay starting the isoc stream (and thus using valuable usb bandwidth) until the application does a STREAM_ON Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] stb6100: warning cleanupMauro Carvalho Chehab
drivers/media/dvb/frontends/stb6100.c:120: warning: ‘stb6100_normalise_regs’ defined but not used Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: Rename IR raw interface to ir-raw.cMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: use rc_map_ prefix for all rc map tablesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: Name RC keymap tables as rc_map_tableMauro Carvalho Chehab
Remote keytables had different names all over the place. Part of the fault is due to a bad naming when rc subsystem was created, but there were lots of old names that were still here. Use a common standard for everything. Patch generated by this script: for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_scancode,rc_map_table,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_codes_,rc_map_,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,rc_key_map,rc_map_table,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,rc_map_table_size,rc_map_size,g <$i >a && mv a $i; done Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: Properly name the rc_map structMauro Carvalho Chehab
The struct that describes a rc mapping had an weird and long name. We should properly name it, to make easier for developers to work with it, and to avoid confusion. Basically, generated by this script: for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_scancode_table,rc_map,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,rc_tab,rc_map,g <$i >a && mv a $i; done (and manually fixed where needed) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: Rename remote controller type to rc_type instead of ir_typeMauro Carvalho Chehab
for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,IR_TYPE,RC_TYPE,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_type,rc_type,g <$i >a && mv a $i; done Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] cx231xx: Properly name rc_map nameMauro Carvalho Chehab
rc_map is confusing, as it may be understood as another thing. Properly rename the field to indicate its usage. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] Rename all public generic RC functions from ir_ to rc_Mauro Carvalho Chehab
Those functions are not InfraRed specific. So, rename them to properly reflect it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: rename the remaining things to rc_coreMauro Carvalho Chehab
The Remote Controller subsystem is meant to be used not only by Infra Red but also for similar types of Remote Controllers. The core is not specific to Infra Red. As such, rename: - ir-core.h to rc-core.h - IR_CORE to RC_CORE - namespace inside rc-core.c/rc-core.h To be consistent with the other changes. No functional change on this patch. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: Remove ir-common.hMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: remove ir-common moduleMauro Carvalho Chehab
Something weird happened with commit 740069e6e043403199dbe2b42256722fb814f6ae. Instead of dong the right thing, it got somehow corrupted and reverted the rc changes. Thanks to David Härdeman for pointing me about the problem. This patch should be merged with 740069e6e04 before sending upstream. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] stb0899: fix diseqc messages getting lostManu Abraham
- Some badly written applications in conjuction with certain SEC devices do send too many messages causing the DiSEqC bus to get congested. As a result, the end devices do get confused and hence do not respond. The issue was found by Julian Scheel. Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] stb6100: Improve tuner performanceManu Abraham
- Reduce the amount of white noise present, which causes the demodulator a significant time to acquire a frontend lock on a whole. Frontend shows a large significant improvement in performance. Thanks to Peter Nayler for helping to identify the potential hotspots and fixing them. Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] Mantis: Rename gpio_set_bits to mantis_gpio_set_bitsBen Hutchings
This function is declared extern and exported, and should not be given a generic name which may conflict with gpiolib in future. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] Mantis: use dvb_attach to avoid double dereferencing on module removalBjørn Mork
Convert the driver to use the dvb_attach macro to avoid the hard dependency on the frontend drivers. The hard dependecy will result in loading a number of unused frontends, and unwanted automatic dereferencing. This fixes a bug where unloading the mantis driver will derefence any attached frontend twice, which will cause an oops if the same frontend is used by another driver. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] Mantis: append tasklet maintenance for DVB stream deliveryMarko Ristola
After dvb-core has called mantis-fe->stop_feed(dvbdmxfeed) the last time (count to zero), no data should ever be copied with dvb_dmx_swfilter() by a tasklet: the target structure might be in an unusable state. Caller of mantis_fe->stop_feed() assumes that feeding is stopped after stop_feed() has been called, ie. dvb_dmx_swfilter() isn't running, and won't be called. There is a risk that dvb_dmx_swfilter() references freed resources (memory or spinlocks or ???) causing instabilities. Thus tasklet_disable(&mantis->tasklet) must be called inside of mantis-fe->stop_feed(dvbdmxfeed) when necessary. Signed-off-by: Marko Ristola <marko.ristola@kolumbus.fi> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] Mantis, hopper: use MODULE_DEVICE_TABLEManu Abraham
use the macro to make modules auto-loadable Thanks to Ozan Çağlayan <ozan@pardus.org.tr> for pointing it out Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] i2c: Remove obsolete cleanup for clientdataWolfram Sang
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit. This is obsolete meanwhile, so fix it and hope the word will spread. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] media: video: do not clear 'driver' from an i2c_clientWolfram Sang
The i2c-core does this already. Reported-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] cx231xx-417: Remove unnecessary casts of void ptr returning alloc ↵Jesper Juhl
function return values Hi, The [vk][cmz]alloc(_node) family of functions return void pointers which it's completely unnecessary/pointless to cast to other pointer types since that happens implicitly. This patch removes such casts from drivers/media/ Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] timblogiw: fix kconfig & build errorRandy Dunlap
timblogiw uses dma() interfaces and it selects TIMB_DMA for that support. However, drivers/dma/ is not built unless CONFIG_DMA_ENGINE is enabled, so select/enable that symbol also. drivers/built-in.o: In function `timblogiw_close': timblogiw.c:(.text+0x4419fe): undefined reference to `dma_release_channel' drivers/built-in.o: In function `buffer_release': timblogiw.c:(.text+0x441a8d): undefined reference to `dma_sync_wait' drivers/built-in.o: In function `timblogiw_open': timblogiw.c:(.text+0x44212b): undefined reference to `__dma_request_channel' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] mfd: Add timberdale video-in driver to timberdaleRichard Röjfors
This patch defines platform data for the video-in driver and adds it to all configurations of timberdale. Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] media: Add timberdale video-in driverRichard Röjfors
This patch adds the timberdale video-in driver. The video IP of timberdale delivers the video data via DMA. The driver uses the DMA api to handle DMA transfers, and make use of the V4L2 video buffers to handle buffers against user space. If available the driver uses an encoder to get/set the video standard Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] drivers/staging/cx25821: Use pr_fmt and pr_<level>Joe Perches
Fix several defects with bad line continuation uses that introduce whitespace. Fix several defects with lines missing "\n". Standardize prefixes via pr_fmt. Remove internal cx25821 prefixes. Standardize :%s():" ... __func__ uses. Coalesce long formats. Add KERN_<level> prefixes via pr_<level> to printks. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] IX2505V: i2c transfer error code ignoredMatthias Schwarzott
It seems that ix2505v driver ignores a i2c error in ix2505v_read_status_reg. This looks like a typing error using (ret = 1) instead of correct (ret == 1). Acked-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] TM6000: Drop unused macroJean Delvare
Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Michel Ludwig <michel.ludwig@gmail.com> Cc: Stefan Ringel <stefan.ringel@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] TM6000: Clean-up i2c initializationJean Delvare
Usage of templates for large structures is a bad idea, as it wastes a lot of space. Manually initializing the few fields we need is way more efficient. Also set the algorithm data const, use strlcpy instead of strcpy, fix a small race (device data must always be set before registering said device) and properly return error on adapter registration failure. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Michel Ludwig <michel.ludwig@gmail.com> Cc: Stefan Ringel <stefan.ringel@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: Remove ir-common moduleMauro Carvalho Chehab
Now, just one old bttv board uses the old RC5 raw decoding routines. Its conversion to rc-core requires the generation of IRQ data for both positive and negative transitions at the IRQ line. I'm not sure if bttv driver supports it or if the transitions will be reliable enough. So, due to the lack of hardware for testing, the better for now is to just move the legacy routines to bttv driver, and wait for someone with a Nebula Digi could help to port it to use also rc-core raw decoders. Acked-by: Hermann Pitton <hermann-pitton@arcor.de> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] saa7134: Remove legacy IR decoding logic inside the moduleMauro Carvalho Chehab
The only IR left still using the old raw decoders on saa7134 is ENCORE FM 5.3. As it is now using the standard rc-core raw decoders, lots of old code can be removed from saa7134. Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] saa7134: use rc-core raw decoders for Encore FM 5.3Mauro Carvalho Chehab
Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] tm6000: add revision checkStefan Ringel
adding chip revision check Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] drivers/media: Use vzallocJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] gspca - ov519: New sensor ov7660 with bridge ov530 (ov519)Jean-François Moine
[mchehab@redhat.com: Some CodingStyle fixes] Tested-by: Anca Emanuel <anca.emanuel@gmail.com> Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] gspca - ov519: Re-initialize the webcam at resume timeJean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] gspca - ov519: Initialize the ov519 snapshot registerJean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] gspca - ov519: Change the ov519 start and stop sequencesJean-François Moine
- start and stop streaming are done via the FRAR - streaming suspend (for control change) is done by video reset Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] gspca - ov519: Simplify the LED control functionsJean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] gspca - ov519: Check the disabled controls at start time onlyJean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] gspca - ov519: Clearer debug and error messagesJean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 16:02:28 +0000