summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-07-01Input: tps6507x-ts - convert to polled input device infrastructureDmitry Torokhov
There is no need to roll our own polling scheme when we already have one implemented by the core. Tested-by: Manish Badarkhe <badarkhe.manish@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-25Input: tps6507x-ts - remove vref from platform dataDmitry Torokhov
Although defined in platform data, vref is not used anywhere. Also remove model, irq, and clear_penirq as they are not used either. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-25Input: tps6507x-ts - use bool for booleansDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-25Input: tps6507x-ts - remove bogus unreachable codeAlan Cox
tsc->polling is write only and the poll local is meaningless Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-25Input: samsung-keypad - let device core setup the default pin configurationThomas Abraham
With device core now able to setup the default pin configuration, the pin configuration code based on the deprecated Samsung specific gpio bindings is removed. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-18Input: xpad - fix for "Mad Catz Street Fighter IV FightPad" controllersShawn Joseph
Added MAP_TRIGGERS_TO_BUTTONS for Mad Catz Street Fighter IV FightPad device. This controller model was already supported by the xpad driver, but none of the buttons work correctly without this change. Tested on kernel version 3.9.5. Signed-off-by: Shawn Joseph <jms.576@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-18Input: wacom - add a new stylus (0x100802) for Intuos5 and CintiqsPing Cheng
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-10Input: add missing dependencies on CONFIG_HAS_IOMEMBen Hutchings
Several drivers don't build on s390 with CONFIG_PCI disabled as they require MMIO functions. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: stable@vger.kernel.org # 3.9 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-05Input: cyttsp - fix swapped mfg_stat and mfg_cmd registersMatthias Kaehlcke
The command and status register in the driver were swapped with respect to the order specified in the datasheet (CY8CTMA140). Confirmed with Cypress that the order in the datasheet is correct. Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-05Input: cyttsp - add missing handshakeFerruh Yigit
For the devices that has blocking with timeout communication, these extra handshakes will prevent one timeout delay in startup sequence Tested-by: Ferruh Yigit <fery@cypress.com> on TMA300-DVK Signed-off-by: Ferruh Yigit <fery@cypress.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-05Input: cyttsp - fix memcpy size paramFerruh Yigit
memcpy param is wrong because of offset in bl_cmd, this may corrupt the stack which may cause a crash. Tested-by: Ferruh Yigit <fery@cypress.com> on TMA300-DVK Signed-off-by: Ferruh Yigit <fery@cypress.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-04Input: wacom - fix a typo for Cintiq 22HDTPing Cheng
And make the lines easier to read. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-04Input: synaptics - fix sync lost after resume on some laptopsEric Miao
In summary, the symptom is intermittent key events lost after resume on some machines with synaptics touchpad (seems this is synaptics _only_), and key events loss is due to serio port reconnect after psmouse sync lost. Removing psmouse and inserting it back during the suspend/resume process is able to work around the issue, so the difference between psmouse_connect() and psmouse_reconnect() is the key to the root cause of this problem. After comparing the two different paths, synaptics driver has its own implementation of synaptics_reconnect(), and the missing psmouse_probe() seems significant, the patch below added psmouse_probe() to the reconnect process, and has been verified many times that the issue could not be reliably reproduced. There are two PS/2 commands in psmouse_probe(): 1. PSMOUSE_CMD_GETID 2. PSMOUSE_CMD_RESET_DIS Only the PSMOUSE_CMD_GETID seems to be significant. The PSMOUSE_CMD_RESET_DIS is irrelevant to this issue after trying several times. So we have only implemented this patch to issue the PSMOUSE_CMD_GETID so far. Tested-by: Daniel Manrique <daniel.manrique@canonical.com> Signed-off-by: James M Leddy <james.leddy@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-05-23Input: wacom - add an eraser to DTH2242/DTK2241Ping Cheng
plus send begin and end of express keys events for Cintiq 13HD and DTH2242/DTK2241 Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-05-05Input: wacom - add a few new styli for Cintiq seriesPing Cheng
Add new styli for Cintiq 13HD and 22HD. Update comments for for tools. Check whole 10 nibbles of tool ID for tool types. Remove unuecessary tool type for Intuos series PAD. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-05-05Input: wacom - add three new display tabletsPing Cheng
Cintiq 13HD, DTK 2241, and Cintiq 22HDT are supported. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-05-05Input: egalax_ts - ABS_MT_POSITION_Y not reported wellHeiko Abraham
The egalax_ts touchscreen modul not report ABS_MT_POSITION_Y proper. As result it may be, that upper software levels only receive x coordinates well. Signed-off-by: Heiko Abraham <abrahamh@web.de> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-05-01Merge branch 'next' into for-linusDmitry Torokhov
Prepare first set of updates for 3.10 merge window.
2013-04-19Input: trackpoint - Optimize trackpoint init to use power-on resetShawn Nematbakhsh
The trackpoint driver sets various parameter default values, all of which happen to be power-on defaults (Source: IBM TrackPoint Engineering Specification, Version 4.0. Also confirmed by empirical data). By sending the power-on reset command to reset all parameters to power-on state, we can skip the lengthy process of programming all parameters. In testing, ~2.5 secs of time writing parameters was reduced to .35 seconds waiting for power-on reset to complete. Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-19Input: wacom - fix "can not retrieve extra class descriptor" for DTH2242Ping Cheng
Same as Cintiq 24HDT, DTH2242 has two interfaces sharing one configuration. This patch ignores the second interface. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-19Input: wacom - DTH2242 Grip Pen id was off by one bitPing Cheng
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-15Input: apbps2 - convert to devm_ioremap_resource()Sachin Kamat
Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-15Input: ALPS - use %ph to print buffersDmitry Torokhov
This form is more concise. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-15Input: st1232 - add reset pin handlingBastian Hecht
We add the possibility to hand over a GPIO number for the reset pin. This way we can remove existing board code that takes care of it and group this information properly in the platform data or in the device tree configuration. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-15Input: st1232 - convert to devm_* infrastructureLaurent Pinchart
Use the devm_* managed functions to allocate resources. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-15Input: wacom - correct reported resolution for Intuos4 WirelessJason Gerecke
Reported-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-07Input: wacom - fix "can not retrieve extra class descriptor" for 24HDTJason Gerecke
The MFT device in the Cintiq 24HDT has two interfaces sharing the same configuration. Without this patch, the driver attempts to make use of both interfaces, even though the second interface is not compatible with this driver. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-07Input: MT - handle semi-mt devices in coreHenrik Rydberg
Most semi-mt drivers use the slots in a manual way, but really only need to treat the finger count manually. With this patch, a semi-mt driver may use the input-mt core for everything else. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-07Input: adxl34x - use spi_get_drvdata()Jingoo Han
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-07Input: ad7877 - use spi_get_drvdata() and spi_set_drvdata()Jingoo Han
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-07Input: ads7846 - use spi_get_drvdata() and spi_set_drvdata()Jingoo Han
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-01Input: ims-pcu - fix a memory leak on errorDmitry Torokhov
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-01Input: sysrq - supplement reset sequence with timeout functionalityMathieu J. Poirier
Some devices have too few buttons, which it makes it hard to have a reset combo that won't trigger automatically. As such a timeout functionality that requires the combination to be held for a given amount of time before triggering is introduced. If a key combo is recognized and held for a 'timeout' amount of time, the system triggers a reset. If the timeout value is omitted the driver simply ignores the functionality. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-31Input: tegra-kbc - support for defining row/columns based on SoCLaxman Dewangan
NVIDIA's Tegra20 and Tegra30 supports the 16x8 keyboard matrix and T114 support the 11x8 Key matrix. Add support for defining the maximum row/columns based on SoC through proper compatibility. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-31Input: imx_keypad - switch to using managed resourcesFabio Estevam
Using devm_ functions can make the code cleaner and simpler. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-31Input: arc_ps2 - add support for device treeMischa Jonker
Add match table for device tree binding and dts binding doc. Signed-off-by: Mischa Jonker <mjonker@synopsys.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-31Input: mma8450 - fix signed 12bits to 32bits conversionSebastien Royen
Event value is wrong. Should be in range -2048 to 2047, but is in range 0 to 4095. Use s8 to int conversion and remove 0xfff mask. Signed-off-by: Sebastien Royen <sebastien.royen@armadeus.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-31Input: eeti_ts - remove redundant null checkSachin Kamat
'pdata' is already dereferenced earlier. Hence this check is meaningless. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-31Input: edt-ft5x06 - remove redundant null check before kfreeSachin Kamat
kfree on a null pointer is a no-op. Hence null check is not necessary. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-26Input: ad714x - add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/input/misc/ad714x-i2c.c:17:12: warning: 'ad714x_i2c_suspend' defined but not used [-Wunused-function] drivers/input/misc/ad714x-i2c.c:22:12: warning: 'ad714x_i2c_resume' defined but not used [-Wunused-function] drivers/input/misc/ad714x-spi.c:20:12: warning: 'ad714x_spi_suspend' defined but not used [-Wunused-function] drivers/input/misc/ad714x-spi.c:25:12: warning: 'ad714x_spi_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-26Input: adxl34x - add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/input/misc/adxl34x-spi.c:98:12: warning: 'adxl34x_spi_suspend' defined but not used [-Wunused-function] drivers/input/misc/adxl34x-spi.c:108:12: warning: 'adxl34x_spi_resume' defined but not used [-Wunused-function] drivers/input/misc/adxl34x-i2c.c:109:12: warning: 'adxl34x_i2c_suspend' defined but not used [-Wunused-function] drivers/input/misc/adxl34x-i2c.c:119:12: warning: 'adxl34x_i2c_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: mc13783_ts - use module_platform_driver_probe()Fabio Porcedda
This patch converts the drivers to use the module_platform_driver_probe() macro which makes the code smaller and a bit simpler. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: atmel-wm97xx - use module_platform_driver_probe macroSachin Kamat
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: q40kbd - use module_platform_driver_probe macroSachin Kamat
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: at32psif - use module_platform_driver_probe macroSachin Kamat
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: amimouse - use module_platform_driver_probe macroSachin Kamat
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: nomadik-ske-keypad - use module_platform_driver_probe macroSachin Kamat
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: amikbd - use module_platform_driver_probe macroSachin Kamat
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: twl4030-pwrbutton - use module_platform_driver_probe macroSachin Kamat
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: davinci_keyscan - use module_platform_driver_probe macroSachin Kamat
module_platform_driver_probe() simplifies the code by eliminating boilerplate code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-06 15:19:15 +0000