summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-08-04nbd: fix race in ioctlVegard Nossum
Quentin ran into this bug: WARNING: CPU: 64 PID: 10085 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x65/0x80 sysfs: cannot create duplicate filename '/devices/virtual/block/nbd3/pid' Modules linked in: nbd CPU: 64 PID: 10085 Comm: qemu-nbd Tainted: G D 4.6.0+ #7 0000000000000000 ffff8820330bba68 ffffffff814b8791 ffff8820330bbac8 0000000000000000 ffff8820330bbab8 ffffffff810d04ab ffff8820330bbaa8 0000001f00000296 0000000000017681 ffff8810380bf000 ffffffffa0001790 Call Trace: [<ffffffff814b8791>] dump_stack+0x4d/0x6c [<ffffffff810d04ab>] __warn+0xdb/0x100 [<ffffffff810d0574>] warn_slowpath_fmt+0x44/0x50 [<ffffffff81218c65>] sysfs_warn_dup+0x65/0x80 [<ffffffff81218a02>] sysfs_add_file_mode_ns+0x172/0x180 [<ffffffff81218a35>] sysfs_create_file_ns+0x25/0x30 [<ffffffff81594a76>] device_create_file+0x36/0x90 [<ffffffffa0000e8d>] __nbd_ioctl+0x32d/0x9b0 [nbd] [<ffffffff814cc8e8>] ? find_next_bit+0x18/0x20 [<ffffffff810f7c29>] ? select_idle_sibling+0xe9/0x120 [<ffffffff810f6cd7>] ? __enqueue_entity+0x67/0x70 [<ffffffff810f9bf0>] ? enqueue_task_fair+0x630/0xe20 [<ffffffff810efa76>] ? resched_curr+0x36/0x70 [<ffffffff810f0078>] ? check_preempt_curr+0x78/0x90 [<ffffffff810f00a2>] ? ttwu_do_wakeup+0x12/0x80 [<ffffffff810f01b1>] ? ttwu_do_activate.constprop.86+0x61/0x70 [<ffffffff810f0c15>] ? try_to_wake_up+0x185/0x2d0 [<ffffffff810f0d6d>] ? default_wake_function+0xd/0x10 [<ffffffff81105471>] ? autoremove_wake_function+0x11/0x40 [<ffffffffa0001577>] nbd_ioctl+0x67/0x94 [nbd] [<ffffffff814ac0fd>] blkdev_ioctl+0x14d/0x940 [<ffffffff811b0da2>] ? put_pipe_info+0x22/0x60 [<ffffffff811d96cc>] block_ioctl+0x3c/0x40 [<ffffffff811ba08d>] do_vfs_ioctl+0x8d/0x5e0 [<ffffffff811aa329>] ? ____fput+0x9/0x10 [<ffffffff810e9092>] ? task_work_run+0x72/0x90 [<ffffffff811ba627>] SyS_ioctl+0x47/0x80 [<ffffffff8185f5df>] entry_SYSCALL_64_fastpath+0x17/0x93 ---[ end trace 7899b295e4f850c8 ]--- It seems fairly obvious that device_create_file() is not being protected from being run concurrently on the same nbd. Quentin found the following relevant commits: 1a2ad21 nbd: add locking to nbd_ioctl 90b8f28 [PATCH] end of methods switch: remove the old ones d4430d6 [PATCH] beginning of methods conversion 08f8585 [PATCH] move block_device_operations to blkdev.h It would seem that the race was introduced in the process of moving nbd from BKL to unlocked ioctls. By setting nbd->task_recv while the mutex is held, we can prevent other processes from running concurrently (since nbd->task_recv is also checked while the mutex is held). Reported-and-tested-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Markus Pargmann <mpa@pengutronix.de> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Pavel Machek <pavel@suse.cz> Cc: Jens Axboe <axboe@fb.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04floppy: fix open(O_ACCMODE) for ioctl-only openJiri Kosina
Commit 09954bad4 ("floppy: refactor open() flags handling"), as a side-effect, causes open(/dev/fdX, O_ACCMODE) to fail. It turns out that this is being used setfdprm userspace for ioctl-only open(). Reintroduce back the original behavior wrt !(FMODE_READ|FMODE_WRITE) modes, while still keeping the original O_NDELAY bug fixed. Cc: stable@vger.kernel.org # v4.5+ Reported-by: Wim Osterholt <wim@djo.tudelft.nl> Tested-by: Wim Osterholt <wim@djo.tudelft.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04Input: silead - remove some dead codeDan Carpenter
buf[0] is an unsigned char. touch_nr is an int. The test for negative here doesn't make sense so I have removed it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-04Input: sis-i2c - select CONFIG_CRC_ITU_TArnd Bergmann
The newly added sis_i2c driver fails to link without the CRC_ITU_T driver enabled: drivers/input/touchscreen/sis_i2c.o: In function `sis_ts_irq_handler': sis_i2c.c:(.text+0xc0): undefined reference to `crc_itu_t' This adds a Kconfig select statement. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: a485cb037fe6 ("Input: add driver for SiS 9200 family I2C touchscreen controllers") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-04Merge branches 'misc' and 'rxe' into k.o/for-4.8-1Doug Ledford
2016-08-04Soft RoCE driverMoni Shoua
Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-04dm raid: fix use of wrong status char during resynchronizationHeinz Mauelshagen
During a resynchronization, device status char 'a' is output on the raid status line for every device of a RAID set. It changes from 'a' to 'A' (unless device failure) when the resynchronization completes. Interrupting and restarting a resynchronization, by reloading the DM table, erroneously lead to status char 'A'. Fix this by avoiding setting the MD_RECOVERY_REQUESTED flag in raid_preresume(). Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-08-04Merge tag 'media/v4.8-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media DocBook removal and some fixups from Mauro Carvalho Chehab: - removal of the media DocBook (since it's all in Sphinx now) - videobuf2: Fix an allocation regression - a few fixes related to the CEC drivers * tag 'media/v4.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] cec: fix off-by-one memset [media] staging: add MEDIA_SUPPORT dependency [media] vivid: don't handle CEC_MSG_SET_STREAM_PATH [media] media: adv7180: Fix broken interrupt register access [media] vb2: Fix allocation size of dma_parms [media] vim2m: copy the other colorspace-related fields as well [media] adv7511: fix VIC autodetect doc-rst: Remove the media docbook
2016-08-04Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge even more updates from Andrew Morton: - dma-mapping API cleanup - a few cleanups and misc things - use jump labels in dynamic-debug * emailed patches from Andrew Morton <akpm@linux-foundation.org>: dynamic_debug: add jump label support jump_label: remove bug.h, atomic.h dependencies for HAVE_JUMP_LABEL arm: jump label may reference text in __exit tile: support static_key usage in non-module __exit sections sparc: support static_key usage in non-module __exit sections powerpc: add explicit #include <asm/asm-compat.h> for jump label drivers/media/dvb-frontends/cxd2841er.c: avoid misleading gcc warning MAINTAINERS: update email and list of Samsung HW driver maintainers block: remove BLK_DEV_DAX config option samples/kretprobe: fix the wrong type samples/kretprobe: convert the printk to pr_info/pr_err samples/jprobe: convert the printk to pr_info/pr_err samples/kprobe: convert the printk to pr_info/pr_err dma-mapping: use unsigned long for dma_attrs media: mtk-vcodec: remove unused dma_attrs include/linux/bitmap.h: cleanup tree-wide: replace config_enabled() with IS_ENABLED() drivers/fpga/Kconfig: fix build failure
2016-08-04drivers/media/dvb-frontends/cxd2841er.c: avoid misleading gcc warningArnd Bergmann
The addition of jump label support in dynamic_debug caused an unexpected warning in exactly one file in the kernel: drivers/media/dvb-frontends/cxd2841er.c: In function 'cxd2841er_tune_tc': include/linux/dynamic_debug.h:134:3: error: 'carrier_offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] __dynamic_dev_dbg(&descriptor, dev, fmt, \ ^~~~~~~~~~~~~~~~~ drivers/media/dvb-frontends/cxd2841er.c:3177:11: note: 'carrier_offset' was declared here int ret, carrier_offset; ^~~~~~~~~~~~~~ The problem seems to be that the compiler gets confused by the extra conditionals in static_branch_unlikely, to the point where it can no longer keep track of which branches have already been taken, and it doesn't realize that this variable is now always initialized when it gets used. I have done lots of randconfig kernel builds and could not find any other file with this behavior, so I assume it's a rare enough glitch that we don't need to change the jump label support but instead just work around the warning in the driver. To achieve that, I'm moving the check for the return value into the switch() statement, which is an obvious transformation, but is enough to un-confuse the compiler here. The resulting code is not as nice to read, but at least we retain the behavior of warning if it gets changed to actually access an uninitialized carrier offset value in the future. Link: http://lkml.kernel.org/r/20160713204342.1221511-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Abylay Ospan <aospan@netup.ru> Cc: Sergey Kozlov <serjk@netup.ru> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04dma-mapping: use unsigned long for dma_attrsKrzysztof Kozlowski
The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04media: mtk-vcodec: remove unused dma_attrsKrzysztof Kozlowski
The local variable dma_attrs is set but never read. Link: http://lkml.kernel.org/r/1468399300-5399-1-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04tree-wide: replace config_enabled() with IS_ENABLED()Masahiro Yamada
The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04drivers/fpga/Kconfig: fix build failureSudip Mukherjee
While building m32r allmodconfig the build is failing with the error: ERROR: "bad_dma_ops" [drivers/fpga/zynq-fpga.ko] undefined! Xilinx Zynq FPGA is using DMA but there was no dependency while building. Link: http://lkml.kernel.org/r/1464346526-13913-1-git-send-email-sudipm.mukherjee@gmail.com Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Cc: Alan Tull <atull@opensource.altera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03Revert "ACPI / hotplug / PCI: Runtime resume bridge before rescan"Linus Torvalds
This reverts commit 16468c783cb4cf72475dcda23fabecb4a4bb0e17. Bisection showed that it was the root cause for a resume hang on a bog-standard all-Intel laptop (Sony Vaio Pro 11), and reverting fixes the hang. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03Merge branches 'hfi1' and 'sge-limit' into k.o/for-4.8-2Doug Ledford
2016-08-03Merge branch 'next' into for-linusDmitry Torokhov
Prepare second round of input updates for 4.8 merge window.
2016-08-03IB/core: Support for CMA multicast join flagsAlex Vesker
Added UCMA and CMA support for multicast join flags. Flags are passed using UCMA CM join command previously reserved fields. Currently supporting two join flags indicating two different multicast JoinStates: 1. Full Member: The initiator creates the Multicast group(MCG) if it wasn't previously created, can send Multicast messages to the group and receive messages from the MCG. 2. Send Only Full Member: The initiator creates the Multicast group(MCG) if it wasn't previously created, can send Multicast messages to the group but doesn't receive any messages from the MCG. IB: Send Only Full Member requires a query of ClassPortInfo to determine if SM/SA supports this option. If SM/SA doesn't support Send-Only there will be no join request sent and an error will be returned. ETH: When Send Only Full Member is requested no IGMP join will be sent. Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed by: Hal Rosenstock <hal@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03IB/sa: Add cached attribute containing SM information to SA portAlex Vesker
Added a new SA port attribute containing SM ClassPortInfo fields, (ClassPortInfo fields: Table 126 IB Spec 1.3.). This is useful for checking SM support for specific features. The attribute is cached to avoid resending queries, caching is done when a successful ClassPortInfo reply is received on the port. Invalidation of the attribute is done on SM change events, SM re-registration events, and SM LID change events. The fields in ClassPortInfo should not change during SM runtime without an event. Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed by: Hal Rosenstock <hal@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03IB/uverbs: Fix race between uverbs_close and remove_oneJason Gunthorpe
Fixes an oops that might happen if uverbs_close races with remove_one. Both contexts may run ib_uverbs_cleanup_ucontext, it depends on the flow. Currently, there is no protection for a case that remove_one didn't make the cleanup it runs to its end, the underlying ib_device was freed then uverbs_close will call ib_uverbs_cleanup_ucontext and OOPs. Above might happen if uverbs_close deleted the file from the list then remove_one didn't find it and runs to its end. Fixes to protect against that case by a new cleanup lock so that ib_uverbs_cleanup_ucontext will be called always before that remove_one is ended. Fixes: 35d4a0b63dc0 ("IB/uverbs: Fix race between ib_uverbs_open and remove_one") Reported-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03IB/mthca: Clean up error unwind flow in mthca_reset()Markus Elfring
The kfree() function was called in a few cases by the mthca_reset() function during error handling even if the passed variables "bridge_header" and "hca_header" contained a null pointer. Adjust jump targets according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03IB/mthca: NULL arg to pci_dev_put is OKMarkus Elfring
The pci_dev_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03IB/hfi1: NULL arg to sc_return_credits is OKMarkus Elfring
The sc_return_credits() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03IB/mlx4: Add diagnostic hardware countersMark Bloch
Expose IB diagnostic hardware counters. The counters count IB events and are applicable for IB and RoCE. The counters can be divided into two groups, per device and per port. Device counters are always exposed. Port counters are exposed only if the firmware supports per port counters. rq_num_dup and sq_num_to are only exposed if we have firmware support for them, if we do, we expose them per device and per port. rq_num_udsdprd and num_cqovf are device only counters. rq - denotes responder. sq - denotes requester. |-----------------------|---------------------------------------| | Name | Description | |-----------------------|---------------------------------------| |rq_num_lle | Number of local length errors | |-----------------------|---------------------------------------| |sq_num_lle | number of local length errors | |-----------------------|---------------------------------------| |rq_num_lqpoe | Number of local QP operation errors | |-----------------------|---------------------------------------| |sq_num_lqpoe | Number of local QP operation errors | |-----------------------|---------------------------------------| |rq_num_lpe | Number of local protection errors | |-----------------------|---------------------------------------| |sq_num_lpe | Number of local protection errors | |-----------------------|---------------------------------------| |rq_num_wrfe | Number of CQEs with error | |-----------------------|---------------------------------------| |sq_num_wrfe | Number of CQEs with error | |-----------------------|---------------------------------------| |sq_num_mwbe | Number of Memory Window bind errors | |-----------------------|---------------------------------------| |sq_num_bre | Number of bad response errors | |-----------------------|---------------------------------------| |sq_num_rire | Number of Remote Invalid request | | | errors | |-----------------------|---------------------------------------| |rq_num_rire | Number of Remote Invalid request | | | errors | |-----------------------|---------------------------------------| |sq_num_rae | Number of remote access errors | |-----------------------|---------------------------------------| |rq_num_rae | Number of remote access errors | |-----------------------|---------------------------------------| |sq_num_roe | Number of remote operation errors | |-----------------------|---------------------------------------| |sq_num_tree | Number of transport retries exceeded | | | errors | |-----------------------|---------------------------------------| |sq_num_rree | Number of RNR NAK retries exceeded | | | errors | |-----------------------|---------------------------------------| |rq_num_rnr | Number of RNR NAKs sent | |-----------------------|---------------------------------------| |sq_num_rnr | Number of RNR NAKs received | |-----------------------|---------------------------------------| |rq_num_oos | Number of Out of Sequence requests | | | received | |-----------------------|---------------------------------------| |sq_num_oos | Number of Out of Sequence NAKs | | | received | |-----------------------|---------------------------------------| |rq_num_udsdprd | Number of UD packets silently | | | discarded on the Receive Queue due to | | | lack of receive descriptor | |-----------------------|---------------------------------------| |rq_num_dup | Number of duplicate requests received | |-----------------------|---------------------------------------| |sq_num_to | Number of time out received | |-----------------------|---------------------------------------| |num_cqovf | Number of CQ overflows | |-----------------------|---------------------------------------| Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03net/mlx4: Query performance and diagnostics countersMark Bloch
Add a function to query diagnostics counters from the firmware. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03net/mlx4: Add diagnostic counters capability bitMark Bloch
Add a bit that indicates if the firmware supports per port diagnostic counters. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03Use smaller 512 byte messages for portmapper messagesMustafa Ismail
Portmapper messages are short and do not occupy more than 512 bytes. Lower portmapper message size to 512 bytes. This change significantly reduces the amount of memory needed when trying to establish a large number of connections simultaneously. The old value is based on page size. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03IB/ipoib: Report SG feature regardless of HW UD CSUM capabilityYuval Shaia
Decouple SG support from HW ability to do UD checksum. This coupling is for historical reasons and removed with 'commit ec5f06156423 ("net: Kill link between CSUM and SG features.")' During driver load it is assumed that device does not supports SG. The final decision is taken after creating UD QP based on device capability. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03IB/mlx4: Don't use GFP_ATOMIC for CQ resize structRoland Dreier
We allocate a small tracking structure as part of mlx4_ib_resize_cq(). However, we don't need to use GFP_ATOMIC -- immediately after the allocation, we call mlx4_cq_resize(), which allocates a command mailbox with GFP_KERNEL and then sleeps on a firmware command, so we better not be in an atomic context. This actually has a real impact, because when this GFP_ATOMIC allocation fails (and GFP_ATOMIC does fail in practice) then a userspace consumer resizing a CQ will get a spurious failure that we can easily avoid. Signed-off-by: Roland Dreier <roland@purestorage.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03IB/hfi1: Disable by defaultBart Van Assche
There is a strict policy in the Linux kernel that new drivers must be disabled by default. Hence leave out the "default m" line from Kconfig. Fixes: f48ad614c100 ("IB/hfi1: Move driver out of staging") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Jubin John <jubin.john@intel.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: <stable@vger.kernel.org> # v4.7+ Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03IB/rdmavt: Disable by defaultBart Van Assche
There is a strict policy in the Linux kernel that new drivers must be disabled by default. Hence leave out the "default m" line from Kconfig. Fixes: 0194621b2253 ("IB/rdmavt: Create module framework and handle driver registration") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Jubin John <jubin.john@intel.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-03Merge branch 'i40iw' into k.o/for-4.8Doug Ledford
2016-08-03Merge branches 'cxgb4' and 'mlx5' into k.o/for-4.8Doug Ledford
2016-08-04ACPI / EC: Work around method reentrancy limit in ACPICA for _QxxLv Zheng
A regression is caused by the following commit: Commit: 02b771b64b73226052d6e731a0987db3b47281e9 Subject: ACPI / EC: Fix an issue caused by the serialized _Qxx evaluations In this commit, using system workqueue causes that the maximum parallel executions of _Qxx can exceed 255. This violates the method reentrancy limit in ACPICA and generates the following error log: ACPI Error: Method reached maximum reentrancy limit (255) (20150818/dsmethod-341) This patch creates a seperate workqueue and limits the number of parallel _Qxx evaluations down to a configurable value (can be tuned against number of online CPUs). Since EC events are handled after driver probe, we can create the workqueue in acpi_ec_init(). Fixes: 02b771b64b73 (ACPI / EC: Fix an issue caused by the serialized _Qxx evaluations) Link: https://bugzilla.kernel.org/show_bug.cgi?id=135691 Cc: 4.3+ <stable@vger.kernel.org> # 4.3+ Reported-and-tested-by: Helen Buus <ubuntu@hbuus.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-03drm: i915: fix build when DEBUG_FS is disabledLinus Torvalds
This clearly had never gotten tested, probably because you need a fairly minimal configuration in order to disable DEBUG_FS (several other options select it). The dummy inline functions that were used for the no-DEBUG_FS case were missing the argument names in the declarations. Fixes: 1dac891c1c95 ("drm/i915: Register debugfs interface last") Reported-and-tested-by: Jörg Otte <jrg.otte@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03dm raid: constructor fails on non-zero incompat_featuresHeinz Mauelshagen
When lvm2 userspace requests a RaidLV repair, it sets the rebuild constructor flag on the new replacement DataLVs but does not clear the respective MetaLVs. Hence the superblock that is loaded from such new MetaLVs may have a non-zero incompat_features member and the constructor will fail with false-positive on incompat_features. Solve by initializing the incompat_features member properly. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-08-03dm raid: fix processing of max_recovery_rate constructor flagHeinz Mauelshagen
__CTR_FLAG_MIN_RECOVERY_RATE was used instead of __CTR_FLAG_MAX_RECOVERY_RATE thus causing max_recovery_rate to be rejected in case min_recovery_rate was already set. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix several cases of missing of_node_put() calls in various networking drivers. From Peter Chen. 2) Don't try to remove unconfigured VLANs in qed driver, from Yuval Mintz. 3) Unbalanced locking in TIPC error handling, from Wei Yongjun. 4) Fix lockups in CPDMA driver, from Grygorii Strashko. 5) More MACSEC refcount et al fixes, from Sabrina Dubroca. 6) Fix MAC address setting in r8169 during runtime suspend, from Chun-Hao Lin. 7) Various printf format specifier fixes, from Heinrich Schuchardt. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits) qed: Fail driver load in 100g MSI mode. ethernet: ti: davinci_emac: add missing of_node_put after calling of_parse_phandle ethernet: stmicro: stmmac: add missing of_node_put after calling of_parse_phandle ethernet: stmicro: stmmac: dwmac-socfpga: add missing of_node_put after calling of_parse_phandle ethernet: renesas: sh_eth: add missing of_node_put after calling of_parse_phandle ethernet: renesas: ravb_main: add missing of_node_put after calling of_parse_phandle ethernet: marvell: pxa168_eth: add missing of_node_put after calling of_parse_phandle ethernet: marvell: mvpp2: add missing of_node_put after calling of_parse_phandle ethernet: marvell: mvneta: add missing of_node_put after calling of_parse_phandle ethernet: hisilicon: hns: hns_dsaf_main: add missing of_node_put after calling of_parse_phandle ethernet: hisilicon: hns: hns_dsaf_mac: add missing of_node_put after calling of_parse_phandle ethernet: cavium: octeon: add missing of_node_put after calling of_parse_phandle ethernet: aurora: nb8800: add missing of_node_put after calling of_parse_phandle ethernet: arc: emac_main: add missing of_node_put after calling of_parse_phandle ethernet: apm: xgene: add missing of_node_put after calling of_parse_phandle ethernet: altera: add missing of_node_put 8139too: fix system hang when there is a tx timeout event. qed: Fix error return code in qed_resc_alloc() net: qlcnic: avoid superfluous assignement dsa: b53: remove redundant if ...
2016-08-03Merge branch '4.7-fixes' into mips-for-linux-nextRalf Baechle
2016-08-03Input: add driver for SiS 9200 family I2C touchscreen controllersMika Penttilä
This is a driver for SiS 9200 family touchscreen controllers using I2C bus. Signed-off-by: Mika Penttilä <mika.penttila@nextfour.com> Acked-by: Tammy Tseng <tammy_tseng@sis.com> Acked-by: Yuger Yu <yuger_yu@sis.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-02Input: ili210x - fix permissions on "calibrate" attributeDmitry Torokhov
"calibrate" attribute does not provide "show" methods and thus we should not mark it as readable. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-02Input: elan_i2c - properly wake up touchpad on ASUS laptopsKT Liao
Some ASUS laptops were shipped with touchpads that require to be woken up first, before trying to switch them into absolute reporting mode, otherwise touchpad would fail to work while flooding the logs with: elan_i2c i2c-ELAN1000:00: invalid report id data (1) Among affected devices are Asus E202SA, N552VW, X456UF, UX305CA, and others. We detect such devices by checking the IC type and product ID numbers and adjusting order of operations accordingly. Signed-off-by: KT Liao <kt.liao@emc.com.tw> Reported-by: Chris Chiu <chiu@endlessm.com> Reported-by: Vlad Glagolev <stealth@vaygr.net> Tested-by: Vlad Glagolev <stealth@vaygr.net> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-02Input: add driver for Silead touchscreensRobert Dolca
This driver adds support for Silead touchscreens. It has been tested with GSL1680 and GSL3680 touch panels. It supports ACPI and device tree enumeration. Screen resolution, the maximum number of fingers supported and firmware name are configurable. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Daniel Jansen <djaniboe@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-02Input: elantech - fix debug dump of the current packetBenjamin Tissoires
The use of mixed psmouse_printk() and printk creates 2 lines in the log, while the use of %*ph solves everything. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-02IB/hfi1: Add cache evict LRU listDean Luick
The original code used a LRU list to evict nodes which were least recently used. For correctness the evict code was moved under the handler->lock, now add back the LRU list. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-02IB/hfi1: Fix memory leak during unexpected shutdownIra Weiny
During an unexpected shutdown, references to tid_rb_node were NULL'ed out without properly being released. Fix this by calling clear_tid_node in the mmu notifier remove callback rather than after these callbacks are called. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-02IB/hfi1: Remove unneeded mm argument in remove functionDean Luick
The reworked mmu_rb interface allows the unused mm argument to be removed. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-02IB/hfi1: Consistently call ops->remove outside spinlockDean Luick
The ops->remove() callback was called by hfi1_mmu_unregister() with a NULL mm argument while holding a spinlock. In the case of sdma_rb_remove() this caused it to pass current->mm to hfi1_release_user_pages() This had 2 problems. First this would attempt to acquire the mmap_sem under a spin lock. Second the use of current->mm is not always guaranteed to be the proper mm when the fd is being closed. Rather than depend on this implicit behavior we move all calls to ops->remove outside of the spinlock. This also allows the correct mm to be used in the remove callback without fear of deadlock. Because the MMU notifier is not guaranteed to hold mm->mmap_sem, but usually does, we must delay all remove callbacks until out of the notifier, when the callbacks can take the mmap_sem if they need to. Code comments were added to clarify what the expectations are for the users of the mmu rb tree. Suggested-by: Jim Foraker <foraker1@llnl.gov> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-02IB/hfi1: Use evict mmu rb operationDean Luick
Use the new cache evict operation in the SDMA code. This allows the cache to properly coordinate evicts and removes, preventing any race. With this change, the separate list, lock, and race flag are not needed. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-02IB/hfi1: Add evict operation to the mmu rb handlerDean Luick
Allow users to clear nodes from the rb tree based on their evict callback. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 10:38:44 +0000