summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-09-07drm/i915: Avoid use of uninitialised values when disabling panel-fitterChris Wilson
We were passing garbage values into the panel-fitter control register when disabling it on Ironlake - those values (filter modes and reserved MBZ bits) would have then be re-used the next time panel-fitting was enabled. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07drm/i915: Avoid pageflipping freeze when we miss the flip prepare interruptSimon Farnsworth
When we miss the flip prepare interrupt, we never get into the software state needed to restart userspace, resulting in a freeze of a full-screen OpenGL application (such as a compositor). Work around this by checking DSPxSURF/DSPxBASE to see if the page flip has actually happened. If it has, do the work we would have done when the flip prepare interrupt comes in. Also, add debugfs information to tell us what's going on (based on the patch from Chris Wilson attached to bugs.fdo bug #29798). Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07drm/i915: Tightly scope intel_encoder to prevent invalid useChris Wilson
We reset intel_encoder for every matching encoder whilst iterating over the encoders attached to this crtc when changing mode. As such in a cloned configuration intel_encoder may not correspond to the correct is_edp encoder. By scoping intel_encoder to the loop, not only is the compiler able to spot this mistake, we also improve readiability for ourselves. [It might not be a mistake, within this function it is unclear as to whether it is permissable for eDP to be cloned...] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07drm/i915: Allocate the PCI resource for the MCHBARChris Wilson
We were failing when trying to allocate the resource for MMIO of the MCHBAR because we forgot to specify what type of resource we wanted. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: stable@kernel.org Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-07drm/i915/dp: Really try 5 times before giving up.Chris Wilson
Only stop trying if the aux channel sucessfully reports that the transmission was completed, otherwise try again. On the 5th failure, bail and report that something is amiss. This fixes a sporadic failure in reading the EDID for my external panel over DP. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-09-07drm/i915/sdvo: Restore guess of the DDC bus in absence of VBIOSChris Wilson
If the VBIOS tells us the mapping of the SDVO device onto the DDC bus, use it. However, if there is no VBIOS available that mapping is uninitialised and we should fallback to our earlier guess. Fix regression introduced in b1083333 (which in turn is a fix for the regression caused by the introduction of this guess, 14571b4). References: Bug 29499 - [945GM] Screen disconnected because of missing VBIOS https://bugs.freedesktop.org/show_bug.cgi?id=29499 Bug 15109 - i945GM fails to detect EDID on DVI port https://bugzilla.kernel.org/show_bug.cgi?id=15109 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Cc: Adam Jackson <ajax@redhat.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: stable@kernel.org
2010-09-07drm/i915/dp: Boost timeout for enabling transcoder to 100msChris Wilson
Adam Hill reported that his Arrandale system required a much longer, up to 200x500us, wait for the panel to initialise or else modesetting would fail. References: https://bugs.freedesktop.org/show_bug.cgi?id=29141 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reported-and-tested-by: Adam Hill <sidepipeuk@yahoo.co.uk>
2010-09-07drm/i915: Re-use set_base_atomic to share setting of the display registersChris Wilson
Lets try to avoid repeating old bugs. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-07drm/i915: Fix offset page-flips on i965+Chris Wilson
i965 uses the Display Registers to compute the offset from the display base so the new base does not need adjusting when flipping. The older chipsets use a fence to access the display and so do perceive the surface as linear and have a single base register which is reprogrammed using the flip. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Reported-by: Marty Jack <martyj19@comcast.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-07drm/i915: Include a generation number in the device infoChris Wilson
To simplify the IS_GEN[234] macros and to enable switching. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-06i915: return -EFAULT if copy_to_user failsDan Carpenter
copy_to_user() returns the number of bytes remaining to be copied and I'm pretty sure we want to return a negative error code here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-09-06i915: return -EFAULT if copy_to_user failsDan Carpenter
copy_to_user returns the number of bytes remaining to be copied, but we want to return a negative error code here. These are returned to userspace. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-09-06agp/intel: Promote warning about failure to setup flush to error.Chris Wilson
Make sure we always detect when we fail to correctly allocate the Isoch Flush Page and print an error to warn the user about the likely memory corruption that will result in invalid rendering or worse. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-09-06drm/i915: overlay on gen2 can't address above 1GDaniel Vetter
So set the coherent dma mask accordingly. This dma mask is only used for physical objects, so it won't really matter allocation-wise. Now this never really surfaced because sane 32bit kernels only have 1G of lowmem. But some eager testers (distros?) still carry around the patch to adjust lowmem via a kconfig option. And the kernel seems to favour high allocations on boot-up, hence the overlay blowing up reliably. Because the patch is tiny and nicely shows how broken gen2 is it's imho worth to merge despite the fact that mucking around with the lowmem/ highmem division is (no longer) supported. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=28318 Cc: stable@kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-06drm/i915: Clear the vblank status bit before polling for the next vblankChris Wilson
The vblank status bit is a sticky bit that must be cleared with a write of '1' prior to polling for the next vblank. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com> jbarnes: I'd still rather see a lock, but I think you're right that we don't generally wait in code that needs not to miss an interrupt. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-06i915: Fix spurious TV detection after 9d0498a2bf + 9559fcdbffPekka Enberg
Partial revert of 9d0498a2bf. Signed-off-by: Pekka Enberg <penberg@kernel.org> Tested-by: Hugh Dickins <hughd@google.com> Tested-by: Sven Joachim <svenjoac@gmx.de> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-06i915: revert some checks added by commit 32aad86fPavel Roskin
This fixes blur-like screen corruption on the following card: VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 10) intel_sdvo_mode_set() should not return prematurely just because some features are not supported. https://bugzilla.kernel.org/show_bug.cgi?id=17151 Signed-off-by: Pavel Roskin <proski@gnu.org> Reported-by: Jonathan Corbet <corbet@lwn.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> [ickle: Relax a couple more checks for failing LVDS modesetting] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-06Revert "drm/i915: Unreference object not handle on creation"Chris Wilson
This reverts commit 86f100b136626e91f4f66f3776303475e2e58998. The kref API requires the handlecount to be initialised to one on object creation (so that kref_get() doesn't complain upon first use) so the dalliance in the drivers is required in order to sink the initial floating reference. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-09-06drivers/gpu/drm/i915/intel_overlay.c needs seq_file.hAndrew Morton
drivers/gpu/drm/i915/intel_overlay.c: In function 'intel_overlay_print_error_state': drivers/gpu/drm/i915/intel_overlay.c:1467: error: implicit declaration of function 'seq_printf' Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16811 Reported-by: Martin Ziegler <ziegler@uni-freiburg.de> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: Dave Airlie <airlied@linux.ie> Cc: Andre Muller <andremuellerster@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-08-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: work around VIA and NEC PHY packet reception bug firewire: core: do not use del_timer_sync() in interrupt context firewire: net: fix unicast reception RCODE in failure paths firewire: sbp2: fix stall with "Unsolicited response" firewire: sbp2: fix memory leak in sbp2_cancel_orbs or at send error ieee1394: Adjust confusing if indentation
2010-08-29firewire: ohci: work around VIA and NEC PHY packet reception bugStefan Richter
VIA VT6306, VIA VT6308, and NEC OrangeLink controllers do not write packet event codes for received PHY packets (or perhaps write evt_no_status, hard to tell). Work around it by overwriting the packet's ACK by ack_complete, so that upper layers that listen to PHY packet reception get to see these packets. (Also tested: TI TSB82AA2, TI TSB43AB22/A, TI XIO2213A, Agere FW643, JMicron JMB381 --- these do not exhibit this bug.) Clemens proposed a quirks flag for that, IOW whitelist known misbehaving controllers for this workaround. Though to me it seems harmless enough to enable for all controllers. The log_ar_at_event() debug log will continue to show the original status from the DMA unit. Reported-by: Clemens Ladisch <clemens@ladisch.de> (VT6308) Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-08-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net/ipv4: Eliminate kstrdup memory leak net/caif/cfrfml.c: use asm/unaligned.h ax25: missplaced sock_put(sk) qlge: reset the chip before freeing the buffers l2tp: test for ethernet header in l2tp_eth_dev_recv() tcp: select(writefds) don't hang up when a peer close connection tcp: fix three tcp sysctls tuning tcp: Combat per-cpu skew in orphan tests. pxa168_eth: silence gcc warnings pxa168_eth: update call to phy_mii_ioctl() pxa168_eth: fix error handling in prope pxa168_eth: remove unneeded null check phylib: Fix race between returning phydev and calling adjust_link caif-driver: add HAS_DMA dependency 3c59x: Fix deadlock between boomerang_interrupt and boomerang_start_tx qlcnic: fix poll implementation netxen: fix poll implementation bridge: netfilter: fix a memory leak
2010-08-28Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: vgaarb: Wrap vga_(get|put) in CONFIG_VGA_ARB drm/radeon/kms: add missing scratch update in dp_detect drm/modes: Fix CVT-R modeline generation drm: fix regression in drm locking since BKL removal. drm/radeon/kms: remove stray radeon_i2c_destroy drm: mm: fix range restricted allocations drm/nouveau: drop drm_global_mutex before sleeping in submission path drm: export drm_global_mutex for drivers to use drm/nv20: Don't use pushbuf calls on the original nv20. drm/nouveau: Fix TMDS on some DCB1.5 boards. drm/nouveau: Fix backlight control on PPC machines with an internal TMDS panel. drm/nv30: Apply modesetting to the correct slave encoder drm/nouveau: Use a helper function to match PCI device/subsystem IDs. drm/nv50: add dcb type 14 to enum to prevent compiler complaint
2010-08-28Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Do not report error overflow as a separate error MCE, AMD: Limit MCE decoding to current families for now
2010-08-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: pxa27x_keypad - remove input_free_device() in pxa27x_keypad_remove() Input: mousedev - fix regression of inverting axes Input: uinput - add devname alias to allow module on-demand load Input: hil_kbd - fix compile error USB: drop tty argument from usb_serial_handle_sysrq_char() Input: sysrq - drop tty argument form handle_sysrq() Input: sysrq - drop tty argument from sysrq ops handlers
2010-08-27drm/radeon/kms: add missing scratch update in dp_detectAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-27drm/modes: Fix CVT-R modeline generationAdam Jackson
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16651 Signed-off-by: Adam Jackson <ajax@redhat.com> Tested-by: Adam Serbinski <adam@serbinksi.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-27drm: fix regression in drm locking since BKL removal.Arnd Bergmann
This locking path needs proper auditing but probably too late for changes at this point for 2.6.36, so lets go with the quick fix, which is to drop the lock around schedule. Reported-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-27drm/radeon/kms: remove stray radeon_i2c_destroyAlex Deucher
I missed this one in the i2c unification patch. This is handled in the core radeon i2c code now. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-27drm: mm: fix range restricted allocationsDaniel Vetter
With the code cleanup in 7a6b2896f261894dde287d3faefa4b432cddca53 is the first bad commit commit 7a6b2896f261894dde287d3faefa4b432cddca53 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Jul 2 15:02:15 2010 +0100 drm_mm: extract check_free_mm_node I've botched up the range-restriction checks. The result is usually an X server dying with SIGBUS in libpixman (software fallback rendering). Change the code to adjust the start and end for range restricted allocations. IMHO this even makes the code a bit clearer. Fixes regression bug: https://bugs.freedesktop.org/show_bug.cgi?id=29738 Reported-by-Tested-by: Till MAtthiesen <entropy@everymail.net> Acked-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-27Merge remote branch 'nouveau/for-airlied' of /ssd/git/drm-nouveau-next into ↵Dave Airlie
drm-fixes * 'nouveau/for-airlied' of /ssd/git/drm-nouveau-next: drm/nouveau: drop drm_global_mutex before sleeping in submission path drm: export drm_global_mutex for drivers to use drm/nv20: Don't use pushbuf calls on the original nv20. drm/nouveau: Fix TMDS on some DCB1.5 boards. drm/nouveau: Fix backlight control on PPC machines with an internal TMDS panel. drm/nv30: Apply modesetting to the correct slave encoder drm/nouveau: Use a helper function to match PCI device/subsystem IDs. drm/nv50: add dcb type 14 to enum to prevent compiler complaint
2010-08-27drm/nouveau: drop drm_global_mutex before sleeping in submission pathBen Skeggs
If we keep hold of the mutex here, the process which currently holds the buffer object will never be able to release it, causing a deadlock. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-08-27drm: export drm_global_mutex for drivers to useBen Skeggs
Nouveau needs to be able to drop the mutex before sleeping to prevent a deadlock from occuring. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-08-26qlge: reset the chip before freeing the buffersBreno Leitao
Qlge is freeing the buffers before stopping the card DMA, and this can cause some severe error, as a EEH event on PPC. This patch just stop the card and then free the resources. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-26amd64_edac: Do not report error overflow as a separate errorBorislav Petkov
When the Overflow MCi_STATUS bit is set, EDAC reports the lost error with a "no information available" message which often puzzles users parsing the dmesg. This doesn't make much sense since this error has been lost anyway so no need for reporting it separately. Thus, report the overflow bit setting in the MCE dump instead. While at it, remove reporting of MiscV and ErrorEnable (en) which are superfluous. Now it looks like this: [ 1501.650024] MC4_STATUS: Corrected error, other errors lost: yes, CPU context corrupt: no, CECC Error [ 1501.666887] Northbridge Error, node 2 Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-08-26drm/nv20: Don't use pushbuf calls on the original nv20.Francisco Jerez
The "return" command is buggy on the original nv20, it jumps back to the caller address as expected, but it doesn't clear the subroutine active bit making the subsequent pushbuf calls fail with a "stack" overflow. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-08-26drm/nouveau: Fix TMDS on some DCB1.5 boards.Francisco Jerez
The TMDS output of an nv11 was being detected as LVDS, because it uses DCB type 2 for TMDS instead of type 4. Reported-by: Bertrand VIEILLE <Vieille.Bertrand@free.fr> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-08-26drm/nouveau: Fix backlight control on PPC machines with an internal TMDS panel.Francisco Jerez
This commit fixes fdo bug 29685. Reported-by: Vlado Plaga <rechner@vlado-do.de> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-08-26drm/nv30: Apply modesetting to the correct slave encoderPatrice Mandin
Signed-off-by: Patrice Mandin <patmandin@gmail.com> Reviewed-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-08-26drm/nouveau: Use a helper function to match PCI device/subsystem IDs.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-08-26drm/nv50: add dcb type 14 to enum to prevent compiler complaintBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-08-25libata-sff: remove harmful BUG_ON from ata_bmdma_qc_issueMark Lord
Remove harmful BUG_ON() from ata_bmdma_qc_issue(), as it casts too wide of a net and breaks sata_mv. It also crashes the kernel while doing the BUG_ON(). There's already a WARN_ON_ONCE() further down to catch the case of POLLING for a BMDMA operation. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Cc: stable@kernel.org
2010-08-25sata_mv: fix broken DSM/TRIM support (v2)Mark Lord
Fix DSM/TRIM commands in sata_mv (v2). These need to be issued using old-school "BM DMA", rather than via the EDMA host queue. Since the chips don't have proper BM DMA status, we need to be more careful with setting the ATA_DMA_INTR bit, since DSM/TRIM often has a long delay between "DMA complete" and "command complete". GEN_I chips don't have BM DMA, so no TRIM for them. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Cc: stable@kernel.org
2010-08-25libata: be less of a drama queen on empty data commandsTejun Heo
ata_qc_issue() BUG_ON()s on data commands w/o data, which may be submitted via SG_IO. Be less of a drama queen and just trigger WARN_ON_ONCE() and fail the command with AC_ERR_SYSTEM. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Stefan Hübner <stefan.huebner@stud.tu-ilmenau.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-08-25[libata] sata_dwc_460ex: signdness bugDan Carpenter
dma_dwc_xfer_setup() returns an int and "dma_chan" needs to be signed for the error handling to work. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-08-25ahci: add HFLAG_YES_FBS and apply it to 88SE9128Tejun Heo
88SE9128 can do FBS and sets it in HOST_CAP but forgets to set FBSCP in PORT_CMD. Implement AHCI_HFLAG_YES_FBS and apply it to 88SE9128. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-08-25libata: remove no longer needed pata_winbond driverBartlomiej Zolnierkiewicz
Winbond W83759A controller is fully supported by pata_legacy driver so remove no longer needed pata_winbond driver. Leave PATA_WINBOND_VLB config option for compatibility reasons and teach pata_legacy to preserve the old behavior of pata_winbond driver. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-08-25pata_cmd64x: revert commit d62f5576Tejun Heo
Commit d62f5576 (pata_cmd64x: fix handling of address setup timings) incorrectly called ata_timing_compute() on UDMA mode on 0 @UT leading to devide by zero fault. Revert it until better fix is available. This is reported in bko#16607 by Milan Kocian who also root caused it. https://bugzilla.kernel.org/show_bug.cgi?id=16607 Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-root-caused-by: Milan Kocian <milan.kocian@wq.cz> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-08-25Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: MAINTAINERS: hwmon/coretemp: Change maintainers hwmon: (k8temp) Differentiate between AM2 and ASB1 hwmon: (ads7871) Fix ads7871_probe error paths hwmon: (coretemp) Fix harmless build warning
2010-08-25Merge branch 'upstream/core' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen: handle events as edge-triggered xen: use percpu interrupts for IPIs and VIRQs
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 14:58:37 +0000