summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-06-16drm/msm: update generated headersRob Clark
Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-06-16drm/msm: remove address-space idRob Clark
Now that the msm_gem supports an arbitrary number of vma's, we no longer need to assign an id (index) to each address space. So rip out the associated code. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-06-16drm/msm: support for an arbitrary number of address spacesRob Clark
It means we have to do a list traversal where we once had an index into a table. But the list will normally have one or two entries. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-06-16drm/msm: refactor how we handle vram carveout buffersRob Clark
Pull some of the logic out into msm_gem_new() (since we don't need to care about the imported-bo case), and don't defer allocating pages. The latter is generally a good idea, since if we are using VRAM carveout to allocate contiguous buffers (ie. no IOMMU), the allocation is more likely to fail. So failing at allocation time is a more sane option. Plus this simplifies things in the next patch. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-06-16drm/msm: pass address-space to _get_iova() and friendsRob Clark
No functional change, that will come later. But this will make it easier to deal with dynamically created address spaces (ie. per- process pagetables for gpu). Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-06-16drm/msm/mdp4+5: move aspace/id to base classRob Clark
Before we can shift to passing the address-space object to _get_iova(), we need to fix a few places (dsi+fbdev) that were hard-coding the adress space id. That gets somewhat easier if we just move these to the kms base class. Prep work for next patch. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-06-16drm/msm/mdp5: kill pipe_lockRob Clark
It serves no purpose, things should be sufficiently synchronized already by atomic framework. And it is somewhat awkward to be holding a spinlock when msm_gem_iova() is going to start needing to grab a mutex. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-06-16drm/msm: fix locking inconsistency for gpu->hw_init()Rob Clark
Most, but not all, paths where calling the with struct_mutex held. The fast-path in msm_gem_get_iova() (plus some sub-code-paths that only run the first time) was masking this issue. So lets just always hold struct_mutex for hw_init(). And sprinkle some WARN_ON()'s and might_lock() to avoid this sort of problem in the future. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-06-16drm/msm: Remove memptrs->wptrJordan Crouse
memptrs->wptr seems to be unused. Remove it to avoid confusing the upcoming preemption code. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-06-16drm/msm: Add a struct to pass configuration to msm_gpu_init()Jordan Crouse
The amount of information that we need to pass into msm_gpu_init() is steadily increasing, so add a new struct to stabilize the function call and make it easier to add new configuration down the line. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-06-16drm/msm: Add hint to DRM_IOCTL_MSM_GEM_INFO to return an object IOVAJordan Crouse
Modify the 'pad' member of struct drm_msm_gem_info to 'flags'. If the user sets 'flags' to non-zero it means that they want a IOVA for the GEM object instead of a mmap() offset. Return the iova in the 'offset' member. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> [robclark: s/hint/flags in commit msg] Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-06-16drm/msm: Remove idle function hookJordan Crouse
There isn't any generic code that uses ->idle so remove it. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-06-16drm/msm: Remove DRM_MSM_NUM_IOCTLSJordan Crouse
The ioctl array is sparsely populated but the compiler will make sure that it is sufficiently sized for all the values that we have so we can safely use ARRAY_SIZE() instead of having a constantly changing #define in the uapi header. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-06-16drm/msm: gpu: Enable zap shader for A5XXJordan Crouse
The A5XX GPU powers on in "secure" mode. In secure mode the GPU can only render to buffers that are marked as secure and inaccessible to the kernel and user through a series of hardware protections. In practice secure mode is used to draw things like a UI on a secure video frame. In order to switch out of secure mode the GPU executes a special shader that clears out the GMEM and other sensitve registers and then writes a register. Because the kernel can't be trusted the shader binary is signed and verified and programmed by the secure world. To do this we need to read the MDT header and the segments from the firmware location and put them in memory and present them for approval. For targets without secure support there is an out: if the secure world doesn't support secure then there are no hardware protections and we can freely write the SECVID_TRUST register from the CPU. We don't have 100% confidence that we can query the secure capabilities at run time but we have enough calls that need to go right to give us some confidence that we're at least doing something useful. Of course if we guess wrong you trigger a permissions violation which usually ends up in a system crash but thats a problem that shows up immediately. [v2: use child device per Bjorn] [v3: use generic MDT loader per Bjorn] [v4: use managed dma functions and ifdefs for the MDT loader] [v5: Add depends for QCOM_MDT_LOADER] Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> [robclark: fix Kconfig to use select instead of depends + #if IS_ENABLED()] Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-06-16BackMerge tag 'v4.12-rc5' into drm-nextDave Airlie
Linux 4.12-rc5 for nouveau fixes
2017-06-16Merge tag 'imx-drm-next-2017-06-08' of ↵Dave Airlie
git://git.pengutronix.de/git/pza/linux into drm-next imx-drm: cleanups and YUV 4:2:0 memory read/write reduction support - Remove counter load enable form PRE, which has no effect. - Add support for setting the double read/write reduction flag in channel parameter memory. This can be used to save some memory bandwidth when capturing in YUV 4:2:0 chroma subsampled formats. - Allocate DMA channel structures as needed, most of the 64 channels are unused or even reserved. - Remove unused interrupt busy waiting routine. - Set VDIC field order for both AUTO and MAN inputs simultaneously as both can't be active at the same time. * tag 'imx-drm-next-2017-06-08' of git://git.pengutronix.de/git/pza/linux: gpu: ipu-v3: vdic: include AUTO field order bit in ipu_vdi_set_field_order gpu: ipu-v3: remove interrupt busy waiting routine gpu: ipu-v3: allocate ipuv3_channels as needed gpu: ipu-v3: Add support for double read/write reduction gpu: ipu-v3: prg: remove counter load enable
2017-06-16Merge tag 'drm-fsl-dcu-for-v4.13' of ↵Dave Airlie
http://git.agner.ch/git/linux-drm-fsl-dcu into drm-next some fsl-dcu cleanups * tag 'drm-fsl-dcu-for-v4.13' of http://git.agner.ch/git/linux-drm-fsl-dcu: drm/fsl-dcu: use new drm_atomic_helper_shutdown drm/fsl-dcu: implement irq_preinstall/uninstall callbacks drm/fsl: Drop drm_vblank_cleanup
2017-06-16Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/media into drm-nextDave Airlie
The series interleaves DRM and V4L2 patches due to dependencies between the R- Car DU and VSP drivers. Mauro has acked all the V4L2 patches to go through your tree, and they don't conflict with anything queued for v4.13 in his tree. If I need to send any conflicting patches through Mauro's tree for v4.13, I'll make sure to base them on this branch. * 'drm/next/du' of git://linuxtv.org/pinchartl/media: drm: rcar-du: Map memory through the VSP device v4l: vsp1: Add API to map and unmap DRM buffers through the VSP v4l: vsp1: Map the DL and video buffers through the proper bus master v4l: rcar-fcp: Add an API to retrieve the FCP device v4l: rcar-fcp: Don't get/put module reference drm: rcar-du: Register a completion callback with VSP1 v4l: vsp1: Extend VSP1 module API to allow DRM callbacks v4l: vsp1: Postpone frame end handling in event of display list race drm: rcar-du: Arm the page flip event after queuing the page flip
2017-06-16Merge tag 'sunxi-drm-for-4.13' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next sun4i-drm changes for 4.13 An unusually big pull request for this merge window, with three notable features: - V3s display engine support. This is especially notable because it uses a different display engine used on the newer Allwinner SoCs (H3, A64 and the likes) that will be quite easily supported now. - HDMI support for the old Allwinner SoCs. This is enabled only on the A10s for now, but should be really easy to extend to deal with A10, A20 and A31 - Preliminary work to deal with dual-pipeline SoCs (A10, A20, A31, H3, etc.). It currently ignores the second pipeline, but we can use the dual-pipelines bindings. This will be useful to enable the display pipeline while we work on the dual-pipeline. * tag 'sunxi-drm-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (27 commits) drm/sun4i: Add compatible for the A10s pipeline drm/sun4i: Add HDMI support dt-bindings: display: sun4i: Add allwinner,tcon-channel property dt-bindings: display: sun4i: Add HDMI display bindings drm/sun4i: Ignore the generic connectors for components drm/sun4i: tcon: multiply the vtotal when not in interlace drm/sun4i: tcon: Change vertical total size computation inconsistency drm/sun4i: tcon: Fix tcon channel 1 backporch calculation drm/sun4i: tcon: Switch mux on only for composite drm/sun4i: tcon: Move the muxing out of the mode set function drm/sun4i: tcon: Add channel debug drm/sun4i: tcon: add support for V3s TCON drm/sun4i: Add compatible string for V3s display engine drm/sun4i: add support for Allwinner DE2 mixers drm/sun4i: add a Kconfig option for sun4i-backend drm/sun4i: abstract a engine type drm/sun4i: return only planes for layers created dt-bindings: add bindings for DE2 on V3s SoC drm/sun4i: backend: Clarify sun4i_backend_layer_enable debug message drm/sun4i: Set TCON clock inside sun4i_tconX_mode_set ...
2017-06-16Merge branch 'drm-next-4.13' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next New radeon and amdgpu features for 4.13: - Lots of Vega10 bug fixes - Preliminary Raven support - KIQ support for compute rings - MEC queue management rework from Andres - Audio support for DCE6 - SR-IOV improvements - Improved module parameters for controlling radeon vs amdgpu support for SI and CIK - Bug fixes - General code cleanups [airlied: dropped drmP.h header from one file was needed and build broke] * 'drm-next-4.13' of git://people.freedesktop.org/~agd5f/linux: (362 commits) drm/amdgpu: Fix compiler warnings drm/amdgpu: vm_update_ptes remove code duplication drm/amd/amdgpu: Port VCN over to new SOC15 macros drm/amd/amdgpu: Port PSP v10.0 over to new SOC15 macros drm/amd/amdgpu: Port PSP v3.1 over to new SOC15 macros drm/amd/amdgpu: Port NBIO v7.0 driver over to new SOC15 macros drm/amd/amdgpu: Port NBIO v6.1 driver over to new SOC15 macros drm/amd/amdgpu: Port UVD 7.0 over to new SOC15 macros drm/amd/amdgpu: Port MMHUB over to new SOC15 macros drm/amd/amdgpu: Cleanup gfxhub read-modify-write patterns drm/amd/amdgpu: Port GFXHUB over to new SOC15 macros drm/amd/amdgpu: Add offset variant to SOC15 macros drm/amd/powerplay: add avfs control for Vega10 drm/amdgpu: add virtual display support for raven drm/amdgpu/gfx9: fix compute ring doorbell index drm/amd/amdgpu: Rename KIQ ring to avoid spaces drm/amd/amdgpu: gfx9 tidy ups (v2) drm/amdgpu: add contiguous flag in ucode bo create drm/amdgpu: fix missed gpu info firmware when cache firmware during S3 drm/amdgpu: export test ib debugfs interface ...
2017-06-16Merge tag 'drm-misc-next-2017-06-15' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-next Cross-subsystem Changes: - dt-bindings: add vendor prefix for NLT Technologies, Ltd. (Lucas) - dt-bindings: Add support for samsung s6e3hf2 panel (Hoegeun) Core Changes: - Add drm_panel_bridge to avoid connector boilerplate in drivers (Eric) - Trival fixes for dupe forward decl and reduce scope of variable (Dawid) Driver Changes: - dw-hdmi: Use mode_valid hook on bridge instead of connector (Jose) - vc4,atmel-hlcdc: Use drm_panel_bridge where appropriate (Eric) - panel: Add Innolux P079ZCA panel driver (Chris) - panel-simple: Add NL12880B20-05, NL192108AC18-02D, P320HVN03 panels (Lucas) - panel-samsung-s6e3ha2: Add s6e3hf2 panel support (Hoegeun) - zte,vc4,pl111,panel,mxsfb: Miscellaneous fixes Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Eric Anholt <eric@anholt.net> Cc: Chris Zhong <zyw@rock-chips.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Hoegeun Kwon <hoegeun.kwon@samsung.com> Cc: Dawid Kurek <dawikur@gmail.com> * tag 'drm-misc-next-2017-06-15' of git://anongit.freedesktop.org/git/drm-misc: (26 commits) drm: Reduce scope of 'state' variable drm: mxsfb_crtc: Reset the eLCDIF controller drm: Remove duplicate forward declaration drm/panel: s6e3ha2: Add support for s6e3hf2 panel on TM2e board dt-bindings: Add support for samsung s6e3hf2 panel drm/panel: add backlight dependency for sitronix-st7789v drm/panel: S6E3HA2 needs backlight code drm/panel: simple: add support for AUO P320HVN03 drm/panel: simple: add support for NLT NL192108AC18-02D dt-bindings: add vendor prefix for NLT Technologies, Ltd. drm/panel: simple: add support for NEC NL12880B20-05 drm/panel: add Innolux P079ZCA panel driver dt-bindings: Add INNOLUX P079ZCA panel bindings drm/vc4: Fix resource leak in 'vc4_get_hang_state_ioctl()' in error handling path drm/vc4/vc4_bo.c: always set bo->resv drm: Add const to name field declaration in struct drm_prop_enum_list drm/pl111: Fix offset calculation for the primary plane. drm/atmel-hlcdc: Fix panel registration drm/bridge: Build the panel wrapper in drm_kms_helper drm/atmel-hlcdc: Replace the panel usage with drm_panel_bridge. ...
2017-06-15drm: Reduce scope of 'state' variableDawid Kurek
Smaller scope reduces visibility of variable and makes usage of uninitialized variable less possible. Changes in v2: - separate declaration and initialization Changes in v3: - add missing signed-off-by tag Signed-off-by: Dawid Kurek <dawikur@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170615174556.GA8872@gmail.com
2017-06-15drm: mxsfb_crtc: Reset the eLCDIF controllerFabio Estevam
According to the eLCDIF initialization steps listed in the MX6SX Reference Manual the eLCDIF block reset is mandatory. Without performing the eLCDIF reset the display shows garbage content when the kernel boots. In earlier tests this issue has not been observed because the bootloader was previously showing a splash screen and the bootloader display driver does properly implement the eLCDIF reset. Add the eLCDIF reset to the driver, so that it can operate correctly independently of the bootloader. Tested on a imx6sx-sdb board. Cc: <stable@vger.kernel.org> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1494007301-14535-1-git-send-email-fabio.estevam@nxp.com
2017-06-15drm/amdgpu: Fix compiler warningsHarish Kasiviswanathan
Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-15drm/amdgpu: vm_update_ptes remove code duplicationHarish Kasiviswanathan
CPU and GPU paths were mostly the same. Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-15drm/amd/amdgpu: Port VCN over to new SOC15 macrosTom St Denis
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-15drm/amd/amdgpu: Port PSP v10.0 over to new SOC15 macrosTom St Denis
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-15drm/amd/amdgpu: Port PSP v3.1 over to new SOC15 macrosTom St Denis
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-15drm/amd/amdgpu: Port NBIO v7.0 driver over to new SOC15 macrosTom St Denis
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-15drm/amd/amdgpu: Port NBIO v6.1 driver over to new SOC15 macrosTom St Denis
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-15drm/amd/amdgpu: Port UVD 7.0 over to new SOC15 macrosTom St Denis
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-15drm/amd/amdgpu: Port MMHUB over to new SOC15 macrosTom St Denis
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-15drm/amd/amdgpu: Cleanup gfxhub read-modify-write patternsTom St Denis
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-15drm/amd/amdgpu: Port GFXHUB over to new SOC15 macrosTom St Denis
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-15drm/amd/amdgpu: Add offset variant to SOC15 macrosTom St Denis
Allows reading/writing via SOC15 macros with offset for various register banks. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-15drm/amd/powerplay: add avfs control for Vega10Eric Huang
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-15drm/amdgpu: add virtual display support for ravenAlex Deucher
Same as other asics. If enabled, exposes a user selectable number of virtual displays. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-15drm/amdgpu/gfx9: fix compute ring doorbell indexAlex Deucher
This got lost when the code was revamped. Copy/paste bug from gfx8. Reported-by: Evan Quan <evan.quan@amd.com> Fixes: 78c168342 (drm/amdgpu: allow split of queues with kfd at queue granularity v4) Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-15drm/amd/amdgpu: Rename KIQ ring to avoid spacesTom St Denis
Swap space for underscore in ring name. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-15drm/amd/amdgpu: gfx9 tidy ups (v2)Tom St Denis
A couple of simple tidy ups to register programming. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v2): Avoid using 'data' uninitialized Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-15drm/amdgpu: add contiguous flag in ucode bo createhorchen
Under VF environment, the ucode would be settled to the visible VRAM, As it would be pinned to the visible VRAM, it's better to add contiguous flag,otherwise it need to move gpu address during the pin process. This movement is not necessary. Signed-off-by: horchen <horace.chen@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-15drm/amdgpu: fix missed gpu info firmware when cache firmware during S3Huang Rui
gpu_info firmware is released after data is used. But when system enters into suspend, upper class driver will cache all firmware names. At that time, gpu_info will be failing to load. It seems an upper class issue, that we should not release gpu_info firmware until device finished. [ 903.236589] cache_firmware: amdgpu/vega10_sdma1.bin [ 903.236590] fw_set_page_data: fw-amdgpu/vega10_sdma1.bin buf=ffff88041eee10c0 data=ffffc90002561000 size=17408 [ 903.236591] cache_firmware: amdgpu/vega10_sdma1.bin ret=0 [ 903.464160] __allocate_fw_buf: fw-amdgpu/vega10_gpu_info.bin buf=ffff88041eee2c00 [ 903.471815] (NULL device *): loading /lib/firmware/updates/4.11.0-custom/amdgpu/vega10_gpu_info.bin failed with error -2 [ 903.482870] (NULL device *): loading /lib/firmware/updates/amdgpu/vega10_gpu_info.bin failed with error -2 [ 903.492716] (NULL device *): loading /lib/firmware/4.11.0-custom/amdgpu/vega10_gpu_info.bin failed with error -2 [ 903.503156] (NULL device *): direct-loading amdgpu/vega10_gpu_info.bin Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-15drm/amdgpu: export test ib debugfs interfaceHuang Rui
As Christian and David's suggestion, submit the test ib ring debug interfaces. It's useful for debugging with the command submission without VM case. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-15drm/amd/powerplay: add GPU power display for vega10Eric Huang
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-15drm/amd/powerplay: update vega10_ppsmc.hEric Huang
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-15drm/amdgpu: avoid to reset wave_front_size to 0Hawking Zhang
No need to clear it. The values are set explicitly. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-15drm/amdgpu: add new member in gpu_info fwHawking Zhang
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-06-14drm/panel: s6e3ha2: Add support for s6e3hf2 panel on TM2e boardHoegeun Kwon
This patch supports TM2e panel and the panel has 1600x2560 resolution in 5.65" physical. This identify panel type with compatibility string, also invoke display mode that matches the type. So add the check code for s6e3ha2 compatibility and s6e3hf2 type and select the drm_display_mode of default and edge type. Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Inki Dae <inki.dae@samsung.com> [treding@nvidia.com: fixup checkpatch warnings] Signed-off-by: Thierry Reding <treding@nvidia.com> Link: http://patchwork.freedesktop.org/patch/msgid/1492504836-19225-3-git-send-email-hoegeun.kwon@samsung.com
2017-06-14drm/panel: add backlight dependency for sitronix-st7789vArnd Bergmann
Without the dependency, we run into a link error: drivers/gpu/drm/panel/panel-sitronix-st7789v.o: In function `st7789v_probe': panel-sitronix-st7789v.c:(.text.st7789v_probe+0xc0): undefined reference to `of_find_backlight_by_node' Fixes: 7142afb3a186 ("drm/panel: Add driver for sitronix ST7789V LCD controller") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170419180326.303994-1-arnd@arndb.de
2017-06-14drm/panel: S6E3HA2 needs backlight codeArnd Bergmann
The new S6E3HA2 driver fails to link when backlight is disabled: ERROR: "backlight_device_register" [drivers/gpu/drm/panel/panel-samsung-s6e3ha2.ko] undefined! ERROR: "backlight_device_unregister" [drivers/gpu/drm/panel/panel-samsung-s6e3ha2.ko] undefined! This adds a Kconfig dependency like we have it for some other panel drivers. Fixes: ed29f9426d9b ("drm/panel: Add support for S6E3HA2 panel driver on TM2 board") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170419175939.189098-2-arnd@arndb.de
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 05:44:37 +0000