summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-10-13mt76x0: phy: align channel gain logic to mt76x2 oneLorenzo Bianconi
Update vga tuning algorithm to the one used in mt76x2 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: introduce mt76x02_init_agc_gain routineLorenzo Bianconi
Add mt76x02_init_agc_gain routine in mt76x02-lib moudule in order to be reused by mt76x0 for vga initalization Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: move mt76x02_phy_adjust_vga_gain in mt76/mt76x02_phy.cLorenzo Bianconi
Move mt76x02_phy_adjust_vga_gain routine in mt76x02-lib module in order to be reused by mt76x0 driver for vga calibration Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: move rssi_gain_thresh routines in mt76x02-lib moduleLorenzo Bianconi
Move mt76x2_get_rssi_gain_thresh and mt76x2_get_low_rssi_gain_thresh routines in mt76x02-lib module in order to be reused by mt76x0 driver for dynamic vga calibration Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: phy: add phy/vco temperature compensationLorenzo Bianconi
Introduce phy/vco temperature calibration. Moreover fix configuration of register 67 on bank0 during temperature reading and use mt76_poll utility routine to poll core34 register. Furthermore temperature compensation needs to be disabled if the device supports tssi compensation. This issue has never been hit since temperature reading is not actually used by usb code. Fixes: 10de7a8b4ab9 ("mt76x0: phy files") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: eeprom: introduce mt76x0_tssi_enabled routineLorenzo Bianconi
Add mt76x0_tssi_enabled in order to check if tssi compensation is enabled since mt76x0 condition differs from mt76x2 one. Moreover move back mt76x02_temp_tx_alc_enabled and mt76x02_tssi_enabled routines in mt76x2/eeprom.h since they are mt76x2 specific Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: phy: update set_channel for mt76x0e devicesLorenzo Bianconi
Do not run mt76x0_vco_cal and mt76x0_bbp_set_bw routines and configure MT_TX_SW_CFG0 register for pcie devices in mt76x0_phy_set_channel function. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: pci: introduce mt76x0_phy_calirate routineLorenzo Bianconi
Add mt76x0_phy_calirate routine in order to perform phy calibration for mt76x0e devices. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: pci: rename mt76x0_phy_calibrateLorenzo Bianconi
Rename mt76x0_phy_calibrate routine in mt76x0_phy_calibration_work in order to not collide with calibration routine for mt76x0e Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: move mt76x02_phy_set_band in mt76x02-lib moduleLorenzo Bianconi
Move mt76x02_phy_set_band routine in mt76x02_phy.c since it is shared between mt76x0 and mt76x2 drivers and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: move mt76x02_phy_set_bw in mt76x02-lib moduleLorenzo Bianconi
Move mt76x02_phy_set_bw routine in mt76x02_phy.c since it is shared between mt76x0 and mt76x2 drivers and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: phy: remove channel parameter from mt76x0_phy_set_chan_bbp_paramsLorenzo Bianconi
Remove unused channel parameter from mt76x0_phy_set_chan_bbp_params routine signature Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: phy: fix restore phase in mt76x0_phy_recalibrate_after_assocLorenzo Bianconi
Fix restore value configured in MT_BBP(IBI, 9) register in mt76x0_phy_recalibrate_after_assoc routine. Fixes: 10de7a8b4ab9 ("mt76x0: phy files") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: mt76x0e: another fix for the external PA current settingFelix Fietkau
- Use the register number define instead of a magic value - Fix inverted bit test (override needs to be applied if the bit is not set) Fixes: 2b2cb40bcd7d ("mt76x0: pci: add hw initialization at bootstrap") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: pci: fix set external PA I/O currentYueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/mediatek/mt76/mt76x0/pci.c: In function 'mt76x0e_register_device': drivers/net/wireless/mediatek/mt76/mt76x0/pci.c:107:8: warning: variable 'data' set but not used [-Wunused-but-set-variable] It seems correct value to write is 'data' Fixes: 2b2cb40bcd7d ("mt76x0: pci: add hw initialization at bootstrap") Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: do not store aggregation sequence number for null-data framesFelix Fietkau
Fixes a rare corner case where a BlockAckReq might get the wrong sequence number. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: remove dma.hStanislaw Gruszka
dma.h is not used any longer. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: reserve enough room for USB tx skbsStanislaw Gruszka
Reserve enough room for USB skb, so we don not need to check the room every time we send frame. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: pci: add mt76x0_register_device in mt76x0e_register_deviceLorenzo Bianconi
Run mt76x0_register_device routine in mt76x0e_register_device in order to register the device to the mac80211 layer. Moreover init mt76_driver_ops data structure and register interrupt line Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: disable ldpc coding for mt76x0 devicesLorenzo Bianconi
Disable ldpc coding for mt76x0 devices. Morover remove mt76x02_mac_fill_txwi routine since it is used just in mt76x02_mac_write_txwi Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: pci: add missing mac80211 callbacksLorenzo Bianconi
Add missing mac80211 callbacks in mt76x0e_ops data structure Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: pci: report firmware version using ethtoolLorenzo Bianconi
Report via ethtool fw_ver and build_ver members of mt76x02_fw_header data structure similarly to what is reported in the syslog Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_eeprom.cLorenzo Bianconi
Use mt76x02_dev data structure as reference in mt76x02_eeprom.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_txrx.cLorenzo Bianconi
Use mt76x02_dev data structure as reference in mt76x02_txrx.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mac.cLorenzo Bianconi
Use mt76x02_dev data structure as reference in mt76x02_mac.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_usb_mcu.cLorenzo Bianconi
Use mt76x02_dev data structure as reference in mt76x02_usb_mcu.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_util.cLorenzo Bianconi
Use mt76x02_dev data structure as reference in mt76x02_util.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_phy.cLorenzo Bianconi
Use mt76x02_dev data structure as reference in mt76x02_phy.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mcu.cLorenzo Bianconi
Use mt76x02_dev data structure as reference in mt76x02_mcu.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: phy: fix bank check in mt76x0_rf_csr_{wr,rr}Lorenzo Bianconi
Fix typo in bank check in mt76x0_rf_csr_{wr,rr} routines. This issue has never been hit since mt76x0_rf_csr_{wr,rr} are actually used just by pci code Fixes: 10de7a8b4ab9 ("mt76x0: phy files") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: use bus helper to identify rf access methodStanislaw Gruszka
Use mt76_is_usb() to identify RF access method instead of MT76_STATE_MCU_RUNNING flag and add warning since MCU has to be initialized before we can access RF registers via MCU. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: correct RF reg pairs write for PCIeStanislaw Gruszka
We have to use RF CSR method for PCIe. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: allow to identify busStanislaw Gruszka
Add helpers to identify bus type. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: correct RF access via RF_CSR register.Stanislaw Gruszka
PCIe version don't use MCU for RF registers access. We need to correct RF CSR method to support up to 127 RF registers. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: print BBP version only for debugStanislaw Gruszka
Use dev_dbg to print BBP version. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13rtlwifi: rtl8821ae: replace _rtl8821ae_mrate_idx_to_arfr_id with generic versionColin Ian King
Function _rtl8821ae_mrate_idx_to_arfr_id is functionally identical to the generic version rtl_mrate_idx_to_arfr_id, so remove _rtl8821ae_mrate_idx_to_arfr_id and use the generic one instead. This also fixes a missing break statement found by CoverityScan in _rtl8821ae_mrate_idx_to_arfr_id, namely: CID#1167237 ("Missing break in switch") Thanks to Joe Perches for spotting this when I submitted an earlier patch. Fixes: 3c05bedb5fef ("Staging: rtl8812ae: Add Realtek 8821 PCI WIFI driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> ACKed-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13iwlwifi: mvm: check return value of rs_rate_from_ucode_rate()Luca Coelho
The rs_rate_from_ucode_rate() function may return -EINVAL if the rate is invalid, but none of the callsites check for the error, potentially making us access arrays with index IWL_RATE_INVALID, which is larger than the arrays, causing an out-of-bounds access. This will trigger KASAN warnings, such as the one reported in the bugzilla issue mentioned below. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=200659 Cc: stable@vger.kernel.org Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13Merge tag 'iwlwifi-next-for-kalle-2018-10-12' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Fourth set of iwlwifi patches intended for 4.20 * Support for a new scan type; * Clean-up in the queue handling code; * A few bug fixes;
2018-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts were easy to resolve using immediate context mostly, except the cls_u32.c one where I simply too the entire HEAD chunk. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12s390/qeth: add TSO support for L2 devicesJulian Wiedmann
Except for the new HW header id, this works just like TSO6 on L3 devices and reuses all the existing data path support in qeth_xmit(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12s390/qeth: add support for IPv6 TSOJulian Wiedmann
This adds TSO6 support for L3 qeth devices. Just like for standard IPv6 traffic, TSO6 doesn't use IP offload and thus runs over the normal qeth_xmit() path. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12s390/qeth: enhance TSO control sequenceJulian Wiedmann
TSO6 requires the full programming sequence, and not just a simple START command. This implements the additional ENABLE command, and adds some sanity checks that were missing for the START command. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12s390/qeth: make TSO controls protocol-agnosticJulian Wiedmann
In preparation for IPv6 TSO, turn the protocol version into a parameter for the TSO control code. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12net: hns3: Resume promisc mode and vlan filter status after loopback testJian Shen
This patch resumes promisc mode and vlan filter status after loopback test. Fixes: 3b75c3df599d ("net: hns3: net: hns3: Add support for IFF_ALLMULTI flag") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12net: hns3: Resume promisc mode and vlan filter status after resetJian Shen
This patch resumes promisc mode and vlan filter status after reset. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12net: hns3: Enable promisc mode when mac vlan table is fullJian Shen
Currently, the driver does nothing when mac vlan table is full. In this case, the packet with new mac address will be dropped by hardware. This patch adds check for the result of sync mac address, and enable promisc mode when mac vlan table is full. Furtherly, disable vlan filter when enable promisc by user command. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12Merge tag 'mac80211-next-for-davem-2018-10-12' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Highlights: * merge net-next, so I can finish the hwsim workqueue removal * fix TXQ NULL pointer issue that was reported multiple times * minstrel cleanups from Felix * simplify lib80211 code by not using skcipher, note that this will conflict with the crypto tree (and this new code here should be used) * use new netlink policy validation in nl80211 * fix up SAE (part of WPA3) in client-mode * FTM responder support in the stack ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12fore200e: fix sbus compileChristoph Hellwig
Fix a stupid typo introduced in the refactoring. Fixes: 0efe5523 ("fore200e: simplify fore200e_bus usage") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12net: fddi: skfp: Remove unused macros 'PNMI_GET_ID' and 'PNMI_SET_ID'YueHaibing
The two PNMI macros are never used Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12net: cdc_ncm: remove set but not used variable 'ctx'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/usb/cdc_ncm.c: In function 'cdc_ncm_status': drivers/net/usb/cdc_ncm.c:1603:22: warning: variable 'ctx' set but not used [-Wunused-but-set-variable] struct cdc_ncm_ctx *ctx; It not used any more after commit fa83dbeee558 ("net: cdc_ncm: remove redundant "disconnected" flag") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 21:09:44 +0000