summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-06-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix cfg80211 deadlock, from Johannes Berg. 2) RXRPC fails to send norigications, from David Howells. 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from Geliang Tang. 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu. 5) The ucc_geth driver needs __netdev_watchdog_up exported, from Valentin Longchamp. 6) Fix hashtable memory leak in dccp, from Wang Hai. 7) Fix how nexthops are marked as FDB nexthops, from David Ahern. 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni. 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien. 10) Fix link speed reporting in iavf driver, from Brett Creeley. 11) When a channel is used for XSK and then reused again later for XSK, we forget to clear out the relevant data structures in mlx5 which causes all kinds of problems. Fix from Maxim Mikityanskiy. 12) Fix memory leak in genetlink, from Cong Wang. 13) Disallow sockmap attachments to UDP sockets, it simply won't work. From Lorenz Bauer. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) net: ethernet: ti: ale: fix allmulti for nu type ale net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init net: atm: Remove the error message according to the atomic context bpf: Undo internal BPF_PROBE_MEM in BPF insns dump libbpf: Support pre-initializing .bss global variables tools/bpftool: Fix skeleton codegen bpf: Fix memlock accounting for sock_hash bpf: sockmap: Don't attach programs to UDP sockets bpf: tcp: Recv() should return 0 when the peer socket is closed ibmvnic: Flush existing work items before device removal genetlink: clean up family attributes allocations net: ipa: header pad field only valid for AP->modem endpoint net: ipa: program upper nibbles of sequencer type net: ipa: fix modem LAN RX endpoint id net: ipa: program metadata mask differently ionic: add pcie_print_link_status rxrpc: Fix race between incoming ACK parser and retransmitter net/mlx5: E-Switch, Fix some error pointer dereferences net/mlx5: Don't fail driver on failure to create debugfs net/mlx5e: CT: Fix ipv6 nat header rewrite actions ...
2020-06-13net: ethernet: ti: ale: fix allmulti for nu type aleGrygorii Strashko
On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow unregistered mcast packets to pass. This happens, because ALE VLAN entries on these SoCs do not contain port masks for reg/unreg mcast packets, but instead store indexes of ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for reg/unreg mcast packets. This path was missed by commit 9d1f6447274f ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled"). Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti(). Fixes: 9d1f6447274f ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-13net: ethernet: ti: am65-cpsw-nuss: fix ale parameters initGrygorii Strashko
The ALE parameters structure is created on stack, so it has to be reset before passing to cpsw_ale_create() to avoid garbage values. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-13Merge tag 'kbuild-v5.8-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - fix build rules in binderfs sample - fix build errors when Kbuild recurses to the top Makefile - covert '---help---' in Kconfig to 'help' * tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: treewide: replace '---help---' in Kconfig files with 'help' kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables samples: binderfs: really compile this sample and fix build issues
2020-06-13Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "This is the set of changes collected since just before the merge window opened. It's mostly minor fixes in drivers. The one non-driver set is the three optical disk (sr) changes where two are error path fixes and one is a helper conversion. The big driver change is the hpsa compat_alloc_userspace rework by Al so he can kill the remaining user. This has been tested and acked by the maintainer" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits) scsi: acornscsi: Fix an error handling path in acornscsi_probe() scsi: storvsc: Remove memset before memory freeing in storvsc_suspend() scsi: cxlflash: Remove an unnecessary NULL check scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM scsi: sr: Fix sr_probe() missing deallocate of device minor scsi: sr: Fix sr_probe() missing mutex_destroy scsi: st: Convert convert get_user_pages() --> pin_user_pages() scsi: target: Rename target_setup_cmd_from_cdb() to target_cmd_parse_cdb() scsi: target: Fix NULL pointer dereference scsi: target: Initialize LUN in transport_init_se_cmd() scsi: target: Factor out a new helper, target_cmd_init_cdb() scsi: hpsa: hpsa_ioctl(): Tidy up a bit scsi: hpsa: Get rid of compat_alloc_user_space() scsi: hpsa: Don't bother with vmalloc for BIG_IOCTL_Command_struct scsi: hpsa: Lift {BIG_,}IOCTL_Command_struct copy{in,out} into hpsa_ioctl() scsi: ufs: Remove redundant urgent_bkop_lvl initialization scsi: ufs: Don't update urgent bkops level when toggling auto bkops scsi: qedf: Remove redundant initialization of variable rc scsi: mpt3sas: Fix memset() in non-RDPQ mode scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj ...
2020-06-13Merge branch 'i2c/for-5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has quite some patches for you this time. I hope it is the move to per-driver-maintainers which is now showing results. We will see. The big news is two new drivers (Nuvoton NPCM and Qualcomm CCI), larger refactoring of the Designware, Tegra, and PXA drivers, the Cadence driver supports being a slave now, and there is support to instanciate SPD eeproms for well-known cases (which will be user-visible because the i801 driver supports it), and some devm_platform_ioremap_resource() conversions which blow up the diffstat. Note that I applied the Nuvoton driver quite late, so some minor fixup patches arrived during the merge window. I chose to apply them right away because they were trivial" * 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (109 commits) i2c: Drop stray comma in MODULE_AUTHOR statements i2c: npcm7xx: npcm_i2caddr[] can be static MAINTAINERS: npcm7xx: Add maintainer for Nuvoton NPCM BMC i2c: npcm7xx: Fix a couple of error codes in probe i2c: icy: Fix build with CONFIG_AMIGA_PCMCIA=n i2c: npcm7xx: Remove unnecessary parentheses i2c: npcm7xx: Add support for slave mode for Nuvoton i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver dt-bindings: i2c: npcm7xx: add NPCM I2C controller i2c: pxa: don't error out if there's no pinctrl i2c: add 'single-master' property to generic bindings i2c: designware: Add Baikal-T1 System I2C support i2c: designware: Move reg-space remapping into a dedicated function i2c: designware: Retrieve quirk flags as early as possible i2c: designware: Convert driver to using regmap API i2c: designware: Discard Cherry Trail model flag i2c: designware: Add Baytrail sem config DW I2C platform dependency i2c: designware: slave: Set DW I2C core module dependency i2c: designware: Use `-y` to build multi-object modules dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller ...
2020-06-13Merge tag 'media/v5.8-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull more media updates from Mauro Carvalho Chehab: - a set of atomisp patches. They remove several abstraction layers, and fixes clang and gcc warnings (that were hidden via some macros that were disabling 4 or 5 types of warnings there). There are also some important fixes and sensor auto-detection on newer BIOSes via ACPI _DCM tables. - some fixes * tag 'media/v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (95 commits) media: rkvdec: Fix H264 scaling list order media: v4l2-ctrls: Unset correct HEVC loop filter flag media: videobuf2-dma-contig: fix bad kfree in vb2_dma_contig_clear_max_seg_size media: v4l2-subdev.rst: correct information about v4l2 events media: s5p-mfc: Properly handle dma_parms for the allocated devices media: medium: cec: Make MEDIA_CEC_SUPPORT default to n if !MEDIA_SUPPORT media: cedrus: Implement runtime PM media: cedrus: Program output format during each run media: atomisp: improve ACPI/DMI detection logs media: Revert "media: atomisp: add Asus Transform T101HA ACPI vars" media: Revert "media: atomisp: Add some ACPI detection info" media: atomisp: improve sensor detection code to use _DSM table media: atomisp: get rid of an iomem abstraction layer media: atomisp: get rid of a string_support.h abstraction layer media: atomisp: use strscpy() instead of less secure variants media: atomisp: set DFS to MAX if sensor doesn't report fps media: atomisp: use different dfs failed messages media: atomisp: change the detection of ISP2401 at runtime media: atomisp: use macros from intel-family.h media: atomisp: don't set hpll_freq twice with different values ...
2020-06-13Merge tag 'libnvdimm-for-5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "Small collection of cleanups to rework usage of ->queuedata and the GUID api" * tag 'libnvdimm-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nvdimm/pmem: stop using ->queuedata nvdimm/btt: stop using ->queuedata nvdimm/blk: stop using ->queuedata libnvdimm: Replace guid_copy() with import_guid() where it makes sense
2020-06-13Merge tag 'ras-core-2020-06-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 RAS updates from Thomas Gleixner: "RAS updates from Borislav Petkov: - Unmap a whole guest page if an MCE is encountered in it to avoid follow-on MCEs leading to the guest crashing, by Tony Luck. This change collided with the entry changes and the merge resolution would have been rather unpleasant. To avoid that the entry branch was merged in before applying this. The resulting code did not change over the rebase. - AMD MCE error thresholding machinery cleanup and hotplug sanitization, by Thomas Gleixner. - Change the MCE notifiers to denote whether they have handled the error and not break the chain early by returning NOTIFY_STOP, thus giving the opportunity for the later handlers in the chain to see it. By Tony Luck. - Add AMD family 0x17, models 0x60-6f support, by Alexander Monakov. - Last but not least, the usual round of fixes and improvements" * tag 'ras-core-2020-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) x86/mce/dev-mcelog: Fix -Wstringop-truncation warning about strncpy() x86/{mce,mm}: Unmap the entire page if the whole page is affected and poisoned EDAC/amd64: Add AMD family 17h model 60h PCI IDs hwmon: (k10temp) Add AMD family 17h model 60h PCI match x86/amd_nb: Add AMD family 17h model 60h PCI IDs x86/mcelog: Add compat_ioctl for 32-bit mcelog support x86/mce: Drop bogus comment about mce.kflags x86/mce: Fixup exception only for the correct MCEs EDAC: Drop the EDAC report status checks x86/mce: Add mce=print_all option x86/mce: Change default MCE logger to check mce->kflags x86/mce: Fix all mce notifiers to update the mce->kflags bitmask x86/mce: Add a struct mce.kflags field x86/mce: Convert the CEC to use the MCE notifier x86/mce: Rename "first" function as "early" x86/mce/amd, edac: Remove report_gart_errors x86/mce/amd: Make threshold bank setting hotplug robust x86/mce/amd: Cleanup threshold device remove path x86/mce/amd: Straighten CPU hotplug path x86/mce/amd: Sanitize thresholding device creation hotplug path ...
2020-06-13Merge tag 'x86-entry-2020-06-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 entry updates from Thomas Gleixner: "The x86 entry, exception and interrupt code rework This all started about 6 month ago with the attempt to move the Posix CPU timer heavy lifting out of the timer interrupt code and just have lockless quick checks in that code path. Trivial 5 patches. This unearthed an inconsistency in the KVM handling of task work and the review requested to move all of this into generic code so other architectures can share. Valid request and solved with another 25 patches but those unearthed inconsistencies vs. RCU and instrumentation. Digging into this made it obvious that there are quite some inconsistencies vs. instrumentation in general. The int3 text poke handling in particular was completely unprotected and with the batched update of trace events even more likely to expose to endless int3 recursion. In parallel the RCU implications of instrumenting fragile entry code came up in several discussions. The conclusion of the x86 maintainer team was to go all the way and make the protection against any form of instrumentation of fragile and dangerous code pathes enforcable and verifiable by tooling. A first batch of preparatory work hit mainline with commit d5f744f9a2ac ("Pull x86 entry code updates from Thomas Gleixner") That (almost) full solution introduced a new code section '.noinstr.text' into which all code which needs to be protected from instrumentation of all sorts goes into. Any call into instrumentable code out of this section has to be annotated. objtool has support to validate this. Kprobes now excludes this section fully which also prevents BPF from fiddling with it and all 'noinstr' annotated functions also keep ftrace off. The section, kprobes and objtool changes are already merged. The major changes coming with this are: - Preparatory cleanups - Annotating of relevant functions to move them into the noinstr.text section or enforcing inlining by marking them __always_inline so the compiler cannot misplace or instrument them. - Splitting and simplifying the idtentry macro maze so that it is now clearly separated into simple exception entries and the more interesting ones which use interrupt stacks and have the paranoid handling vs. CR3 and GS. - Move quite some of the low level ASM functionality into C code: - enter_from and exit to user space handling. The ASM code now calls into C after doing the really necessary ASM handling and the return path goes back out without bells and whistels in ASM. - exception entry/exit got the equivivalent treatment - move all IRQ tracepoints from ASM to C so they can be placed as appropriate which is especially important for the int3 recursion issue. - Consolidate the declaration and definition of entry points between 32 and 64 bit. They share a common header and macros now. - Remove the extra device interrupt entry maze and just use the regular exception entry code. - All ASM entry points except NMI are now generated from the shared header file and the corresponding macros in the 32 and 64 bit entry ASM. - The C code entry points are consolidated as well with the help of DEFINE_IDTENTRY*() macros. This allows to ensure at one central point that all corresponding entry points share the same semantics. The actual function body for most entry points is in an instrumentable and sane state. There are special macros for the more sensitive entry points, e.g. INT3 and of course the nasty paranoid #NMI, #MCE, #DB and #DF. They allow to put the whole entry instrumentation and RCU handling into safe places instead of the previous pray that it is correct approach. - The INT3 text poke handling is now completely isolated and the recursion issue banned. Aside of the entry rework this required other isolation work, e.g. the ability to force inline bsearch. - Prevent #DB on fragile entry code, entry relevant memory and disable it on NMI, #MC entry, which allowed to get rid of the nested #DB IST stack shifting hackery. - A few other cleanups and enhancements which have been made possible through this and already merged changes, e.g. consolidating and further restricting the IDT code so the IDT table becomes RO after init which removes yet another popular attack vector - About 680 lines of ASM maze are gone. There are a few open issues: - An escape out of the noinstr section in the MCE handler which needs some more thought but under the aspect that MCE is a complete trainwreck by design and the propability to survive it is low, this was not high on the priority list. - Paravirtualization When PV is enabled then objtool complains about a bunch of indirect calls out of the noinstr section. There are a few straight forward ways to fix this, but the other issues vs. general correctness were more pressing than parawitz. - KVM KVM is inconsistent as well. Patches have been posted, but they have not yet been commented on or picked up by the KVM folks. - IDLE Pretty much the same problems can be found in the low level idle code especially the parts where RCU stopped watching. This was beyond the scope of the more obvious and exposable problems and is on the todo list. The lesson learned from this brain melting exercise to morph the evolved code base into something which can be validated and understood is that once again the violation of the most important engineering principle "correctness first" has caused quite a few people to spend valuable time on problems which could have been avoided in the first place. The "features first" tinkering mindset really has to stop. With that I want to say thanks to everyone involved in contributing to this effort. Special thanks go to the following people (alphabetical order): Alexandre Chartre, Andy Lutomirski, Borislav Petkov, Brian Gerst, Frederic Weisbecker, Josh Poimboeuf, Juergen Gross, Lai Jiangshan, Macro Elver, Paolo Bonzin,i Paul McKenney, Peter Zijlstra, Vitaly Kuznetsov, and Will Deacon" * tag 'x86-entry-2020-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (142 commits) x86/entry: Force rcu_irq_enter() when in idle task x86/entry: Make NMI use IDTENTRY_RAW x86/entry: Treat BUG/WARN as NMI-like entries x86/entry: Unbreak __irqentry_text_start/end magic x86/entry: __always_inline CR2 for noinstr lockdep: __always_inline more for noinstr x86/entry: Re-order #DB handler to avoid *SAN instrumentation x86/entry: __always_inline arch_atomic_* for noinstr x86/entry: __always_inline irqflags for noinstr x86/entry: __always_inline debugreg for noinstr x86/idt: Consolidate idt functionality x86/idt: Cleanup trap_init() x86/idt: Use proper constants for table size x86/idt: Add comments about early #PF handling x86/idt: Mark init only functions __init x86/entry: Rename trace_hardirqs_off_prepare() x86/entry: Clarify irq_{enter,exit}_rcu() x86/entry: Remove DBn stacks x86/entry: Remove debug IDT frobbing x86/entry: Optimize local_db_save() for virt ...
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-12ibmvnic: Flush existing work items before device removalThomas Falcon
Ensure that all scheduled work items have completed before continuing with device removal and after further event scheduling has been halted. This patch fixes a bug where a scheduled driver reset event is processed following device removal. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-12Merge tag 'thermal-v5.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Add the hwmon support on the i.MX SC (Anson Huang) - Thermal framework cleanups (self-encapsulation, pointless stubs, private structures) (Daniel Lezcano) - Use the PM QoS frequency changes for the devfreq cooling device (Matthias Kaehlcke) - Remove duplicate error messages from platform_get_irq() error handling (Markus Elfring) - Add support for the bandgap sensors (Keerthy) - Statically initialize .get_mode/.set_mode ops (Andrzej Pietrasiewicz) - Add Renesas R-Car maintainer entry (Niklas Söderlund) - Fix error checking after calling ti_bandgap_get_sensor_data() for the TI SoC thermal (Sudip Mukherjee) - Add latency constraint for the idle injection, the DT binding and the change the registering function (Daniel Lezcano) - Convert the thermal framework binding to the Yaml schema (Amit Kucheria) - Replace zero-length array with flexible-array on i.MX 8MM (Gustavo A. R. Silva) - Thermal framework cleanups (alphabetic order for heads, replace module.h by export.h, make file naming consistent) (Amit Kucheria) - Merge tsens-common into the tsens driver (Amit Kucheria) - Fix platform dependency for the Qoriq driver (Geert Uytterhoeven) - Clean up the rcar_thermal_update_temp() function in the rcar thermal driver (Niklas Söderlund) - Fix the TMSAR register for the TMUv2 on the Qoriq platform (Yuantian Tang) - Export GDDV, OEM vendor variables, and don't require IDSP for the int340x thermal driver - trivial conflicts fixed (Matthew Garrett) * tag 'thermal-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (48 commits) thermal/int340x_thermal: Don't require IDSP to exist thermal/int340x_thermal: Export OEM vendor variables thermal/int340x_thermal: Export GDDV thermal: qoriq: Update the settings for TMUv2 thermal: rcar_thermal: Clean up rcar_thermal_update_temp() thermal: qoriq: Add platform dependencies drivers: thermal: tsens: Merge tsens-common.c into tsens.c thermal/of: Rename of-thermal.c thermal/governors: Prefix all source files with gov_ thermal/drivers/user_space: Sort headers alphabetically thermal/drivers/of-thermal: Sort headers alphabetically thermal/drivers/cpufreq_cooling: Replace module.h with export.h thermal/drivers/cpufreq_cooling: Sort headers alphabetically thermal/drivers/clock_cooling: Include export.h thermal/drivers/clock_cooling: Sort headers alphabetically thermal/drivers/thermal_hwmon: Include export.h thermal/drivers/thermal_hwmon: Sort headers alphabetically thermal/drivers/thermal_helpers: Include export.h thermal/drivers/thermal_helpers: Sort headers alphabetically thermal/core: Replace module.h with export.h ...
2020-06-12Merge tag 'pwm/for-5.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "Nothing too exciting for this cycle. A couple of fixes across the board, and Lee volunteered to help with patch review" * tag 'pwm/for-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: Add missing "CONFIG_" prefix MAINTAINERS: Add Lee Jones as reviewer for the PWM subsystem pwm: imx27: Fix rounding behavior pwm: rockchip: Simplify rockchip_pwm_get_state() pwm: img: Call pm_runtime_put() in pm_runtime_get_sync() failed case pwm: tegra: Support dynamic clock frequency configuration pwm: jz4740: Add support for the JZ4725B pwm: jz4740: Make PWM start with the active part pwm: jz4740: Enhance precision in calculation of duty cycle pwm: jz4740: Drop dependency on MACH_INGENIC pwm: lpss: Fix get_state runtime-pm reference handling pwm: sun4i: Support direct clock output on Allwinner A64 pwm: Add support for Azoteq IQS620A PWM generator dt-bindings: pwm: rcar: add r8a77961 support pwm: Add missing '\n' in log messages
2020-06-12Merge tag 'iommu-drivers-move-v5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu driver directory structure cleanup from Joerg Roedel: "Move the Intel and AMD IOMMU drivers into their own subdirectory. Both drivers consist of several files by now and giving them their own directory unclutters the IOMMU top-level directory a bit" * tag 'iommu-drivers-move-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Move Intel IOMMU driver into subdirectory iommu/amd: Move AMD IOMMU driver into subdirectory
2020-06-12Merge tag 'for-linus-5.8b-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - several smaller cleanups - a fix for a Xen guest regression with CPU offlining - a small fix in the xen pvcalls backend driver - an update of MAINTAINERS * tag 'for-linus-5.8b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: MAINTAINERS: Update PARAVIRT_OPS_INTERFACE and VMWARE_HYPERVISOR_INTERFACE xen/pci: Get rid of verbose_request and use dev_dbg() instead xenbus: Use dev_printk() when possible xen-pciback: Use dev_printk() when possible xen: enable BALLOON_MEMORY_HOTPLUG by default xen: expand BALLOON_MEMORY_HOTPLUG description xen/pvcalls: Make pvcalls_back_global static xen/cpuhotplug: Fix initial CPU offlining for PV(H) guests xen-platform: Constify dev_pm_ops xen/pvcalls-back: test for errors when calling backend_connect()
2020-06-11Merge tag 'locking-kcsan-2020-06-11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull the Kernel Concurrency Sanitizer from Thomas Gleixner: "The Kernel Concurrency Sanitizer (KCSAN) is a dynamic race detector, which relies on compile-time instrumentation, and uses a watchpoint-based sampling approach to detect races. The feature was under development for quite some time and has already found legitimate bugs. Unfortunately it comes with a limitation, which was only understood late in the development cycle: It requires an up to date CLANG-11 compiler CLANG-11 is not yet released (scheduled for June), but it's the only compiler today which handles the kernel requirements and especially the annotations of functions to exclude them from KCSAN instrumentation correctly. These annotations really need to work so that low level entry code and especially int3 text poke handling can be completely isolated. A detailed discussion of the requirements and compiler issues can be found here: https://lore.kernel.org/lkml/CANpmjNMTsY_8241bS7=XAfqvZHFLrVEkv_uM4aDUWE_kh3Rvbw@mail.gmail.com/ We came to the conclusion that trying to work around compiler limitations and bugs again would end up in a major trainwreck, so requiring a working compiler seemed to be the best choice. For Continous Integration purposes the compiler restriction is manageable and that's where most xxSAN reports come from. For a change this limitation might make GCC people actually look at their bugs. Some issues with CSAN in GCC are 7 years old and one has been 'fixed' 3 years ago with a half baken solution which 'solved' the reported issue but not the underlying problem. The KCSAN developers also ponder to use a GCC plugin to become independent, but that's not something which will show up in a few days. Blocking KCSAN until wide spread compiler support is available is not a really good alternative because the continuous growth of lockless optimizations in the kernel demands proper tooling support" * tag 'locking-kcsan-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (76 commits) compiler_types.h, kasan: Use __SANITIZE_ADDRESS__ instead of CONFIG_KASAN to decide inlining compiler.h: Move function attributes to compiler_types.h compiler.h: Avoid nested statement expression in data_race() compiler.h: Remove data_race() and unnecessary checks from {READ,WRITE}_ONCE() kcsan: Update Documentation to change supported compilers kcsan: Remove 'noinline' from __no_kcsan_or_inline kcsan: Pass option tsan-instrument-read-before-write to Clang kcsan: Support distinguishing volatile accesses kcsan: Restrict supported compilers kcsan: Avoid inserting __tsan_func_entry/exit if possible ubsan, kcsan: Don't combine sanitizer with kcov on clang objtool, kcsan: Add kcsan_disable_current() and kcsan_enable_current_nowarn() kcsan: Add __kcsan_{enable,disable}_current() variants checkpatch: Warn about data_race() without comment kcsan: Use GFP_ATOMIC under spin lock Improve KCSAN documentation a bit kcsan: Make reporting aware of KCSAN tests kcsan: Fix function matching in report kcsan: Change data_race() to no longer require marking racing accesses kcsan: Move kcsan_{disable,enable}_current() to kcsan-checks.h ...
2020-06-11net: ipa: header pad field only valid for AP->modem endpointAlex Elder
Only QMAP endpoints should be configured to find a pad size field within packet headers. They are found in the first byte of the QMAP header (and the hardware fills only the 6 bits in that byte that constitute the pad_len field). The RMNet driver assumes the pad_len field is valid for received packets, so we want to ensure the pad_len field is filled in that case. That driver also assumes the length in the QMAP header includes the pad bytes. The RMNet driver does *not* pad the packets it sends, so the pad_len field can be ignored. Fix ipa_endpoint_init_hdr_ext() so it only marks the pad field offset valid for QMAP RX endpoints, and in that case indicates that the length field in the header includes the pad bytes. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-11net: ipa: program upper nibbles of sequencer typeAlex Elder
The upper two nibbles of the sequencer type were not used for SDM845, and were assumed to be 0. But for SC7180 they are used, and so they must be programmed by ipa_endpoint_init_seq(). Fix this bug. IPA_SEQ_PKT_PROCESS_NO_DEC_NO_UCP_DMAP doesn't have a descriptive comment, so add one. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-11net: ipa: fix modem LAN RX endpoint idAlex Elder
The endpoint id assigned to the modem LAN RX endpoint for the SC7180 SoC is incorrect. The erroneous value might have been copied from SDM845 and never updated. The correct endpoint id to use for this SoC is 11. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-11net: ipa: program metadata mask differentlyAlex Elder
The way the mask value is programmed for QMAP RX endpoints was based on some wrong assumptions about the way metadata containing the QMAP mux_id value is formatted. The metadata value supplied by the modem is *not* in QMAP format, and in fact contains the mux_id we want in its (big endian) low-order byte. That byte must be written by the IPA into offset 1 of the QMAP header it inserts before the received packet. QMAP TX endpoints *do* use a QMAP header as the metadata sent with each packet. The modem assumes this, and based on that assumes the mux_id is in the second byte. To match those assumptions we must program the modem TX (QMAP) endpoint HDR register to indicate the metadata will be found at offset 0 in the message header. The previous configuration managed to work, but it was not working correctly. This patch fixes a bug whose symptom was receipt of messages containing the wrong QMAP mux_id. In fixing this, get rid of ipa_rmnet_mux_id_metadata_mask(), which was more or less defined so there was a separate place to explain what was happening as we generated the mask value. Instead, put a longer description of how this works above ipa_endpoint_init_hdr(), and define the metadata mask to use as a simple constant. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-11ionic: add pcie_print_link_statusShannon Nelson
Print the PCIe link information for our device. Fixes: 77f972a7077d ("ionic: remove support for mgmt device") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-11Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2020-06-11 This series contains fixes to the iavf driver. Brett fixes the supported link speeds in the iavf driver, which was only able to report speeds that the i40e driver supported and was missing the speeds supported by the ice driver. In addition, fix how 2.5 and 5.0 GbE speeds are reported. Alek fixes a enum comparison that was comparing two different enums that may have different values, so update the comparison to use matching enums. Paul increases the time to complete a reset to allow for 128 VFs to complete a reset. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-11Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Pull updates from Andrew Morton: "A few fixes and stragglers. Subsystems affected by this patch series: mm/memory-failure, ocfs2, lib/lzo, misc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: amdgpu: a NULL ->mm does not mean a thread is a kthread lib/lzo: fix ambiguous encoding bug in lzo-rle ocfs2: fix build failure when TCP/IP is disabled mm/memory-failure: send SIGBUS(BUS_MCEERR_AR) only to current thread mm/memory-failure: prioritize prctl(PR_MCE_KILL) over vm.memory_failure_early_kill
2020-06-11amdgpu: a NULL ->mm does not mean a thread is a kthreadChristoph Hellwig
Use the proper API instead. Fixes: 70539bd795002 ("drm/amd: Update MEC HQD loading code for KFD") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: http://lkml.kernel.org/r/20200404094101.672954-1-hch@lst.de Link: http://lkml.kernel.org/r/20200404094101.672954-2-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-11Merge tag 'block-5.8-2020-06-11' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Some followup fixes for this merge window. In particular: - Seqcount write missing preemption disable for stats (Ahmed) - blktrace fixes (Chaitanya) - Redundant initializations (Colin) - Various small NVMe fixes (Chaitanya, Christoph, Daniel, Max, Niklas, Rikard) - loop flag bug regression fix (Martijn) - blk-mq tagging fixes (Christoph, Ming)" * tag 'block-5.8-2020-06-11' of git://git.kernel.dk/linux-block: umem: remove redundant initialization of variable ret pktcdvd: remove redundant initialization of variable ret nvmet: fail outstanding host posted AEN req nvme-pci: use simple suspend when a HMB is enabled nvme-fc: don't call nvme_cleanup_cmd() for AENs nvmet-tcp: constify nvmet_tcp_ops nvme-tcp: constify nvme_tcp_mq_ops and nvme_tcp_admin_mq_ops nvme: do not call del_gendisk() on a disk that was never added blk-mq: fix blk_mq_all_tag_iter blk-mq: split out a __blk_mq_get_driver_tag helper blktrace: fix endianness for blk_log_remap() blktrace: fix endianness in get_pdu_int() blktrace: use errno instead of bi_status block: nr_sects_write(): Disable preemption on seqcount write block: remove the error argument to the block_bio_complete tracepoint loop: Fix wrong masking of status flags block/bio-integrity: don't free 'buf' if bio_integrity_add_page() failed
2020-06-11net/mlx5: E-Switch, Fix some error pointer dereferencesDan Carpenter
We can't leave "counter" set to an error pointer. Otherwise either it will lead to an error pointer dereference later in the function or it leads to an error pointer dereference when we call mlx5_fc_destroy(). Fixes: 07bab9502641d ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-06-11net/mlx5: Don't fail driver on failure to create debugfsLeon Romanovsky
Clang warns: drivers/net/ethernet/mellanox/mlx5/core/main.c:1278:6: warning: variable 'err' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (!priv->dbg_root) { ^~~~~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlx5/core/main.c:1303:9: note: uninitialized use occurs here return err; ^~~ drivers/net/ethernet/mellanox/mlx5/core/main.c:1278:2: note: remove the 'if' if its condition is always false if (!priv->dbg_root) { ^~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlx5/core/main.c:1259:9: note: initialize the variable 'err' to silence this warning int err; ^ = 0 1 warning generated. The check of returned value of debugfs_create_dir() is wrong because by the design debugfs failures should never fail the driver and the check itself was wrong too. The kernel compiled without CONFIG_DEBUG_FS will return ERR_PTR(-ENODEV) and not NULL as expected. Fixes: 11f3b84d7068 ("net/mlx5: Split mdev init and pci init") Link: https://github.com/ClangBuiltLinux/linux/issues/1042 Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-06-11net/mlx5e: CT: Fix ipv6 nat header rewrite actionsOz Shlomo
Set the ipv6 word fields according to the hardware definitions. Fixes: ac991b48d43c ("net/mlx5e: CT: Offload established flows") Signed-off-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-06-11net/mlx5: Fix devlink objects and devlink device unregister sequenceParav Pandit
Current below problems exists. 1. devlink device is registered by mlx5_load_one(). But it is not unregistered by mlx5_unload_one(). This is incorrect. 2. Above issue leads to, When mlx5 PCI device is removed, currently devlink device is unregistered before devlink ports are unregistered in below ladder diagram. remove_one() mlx5_devlink_unregister() [..] devlink_unregister() <- ports are still registered! mlx5_unload_one() mlx5_unregister_device() mlx5_remove_device() mlx5e_remove() mlx5e_devlink_port_unregister() devlink_port_unregister() 3. Condition checking for registering and unregister device are not symmetric either in these routines. Hence, fix the sequence by having load and unload routines symmetric and in right order. i.e. (a) register devlink device followed by registering devlink ports (b) unregister devlink ports followed by devlink device Do this based on boot and cleanup flags instead of different conditions. Fixes: c6acd629eec7 ("net/mlx5e: Add support for devlink-port in non-representors mode") Fixes: f60f315d339e ("net/mlx5e: Register devlink ports for physical link, PCI PF, VFs") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-06-11net/mlx5: Disable reload while removing the deviceParav Pandit
While unregistration is in progress, user might be reloading the interface. This can race with unregistration in below flow which uses the resources which are getting disabled by reload flow. Hence, disable the devlink reloading first when removing the device. CPU0 CPU1 ---- ---- local_pci_remove() devlink_mutex remove_one() devlink_nl_cmd_reload() mlx5_unregister_device() devlink_reload() ops->reload_down() mlx5_unload_one() Fixes: 4383cfcc65e7 ("net/mlx5: Add devlink reload") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-06-11net/mlx5e: Fix ethtool hfunc configuration changeAya Levin
Changing RX hash function requires rearranging of RQT internal indexes, the user isn't exposed to such changes and these changes do not affect the user configured indirection table. Rebuild RQ table on hfunc change. Fixes: bdfc028de1b3 ("net/mlx5e: Fix ethtool RX hash func configuration change") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-06-11net/mlx5e: Fix repeated XSK usage on one channelMaxim Mikityanskiy
After an XSK is closed, the relevant structures in the channel are not zeroed. If an XSK is opened the second time on the same channel without recreating channels, the stray values in the structures will lead to incorrect operation of queues, which causes CQE errors, and the new socket doesn't work at all. This patch fixes the issue by explicitly zeroing XSK-related structs in the channel on XSK close. Note that those structs are zeroed on channel creation, and usually a configuration change (XDP program is set) happens on XSK open, which leads to recreating channels, so typical XSK usecases don't suffer from this issue. However, if XSKs are opened and closed on the same channel without removing the XDP program, this bug reproduces. Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-06-11net/mlx5: DR, Fix freeing in dr_create_rc_qp()Denis Efremov
Variable "in" in dr_create_rc_qp() is allocated with kvzalloc() and should be freed with kvfree(). Fixes: 297cccebdc5a ("net/mlx5: DR, Expose an internal API to issue RDMA operations") Cc: stable@vger.kernel.org Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-06-11net/mlx5: Fix fatal error handling during device loadShay Drory
Currently, in case of fatal error during mlx5_load_one(), we cannot enter error state until mlx5_load_one() is finished, what can take several minutes until commands will get timeouts, because these commands can't be processed due to the fatal error. Fix it by setting dev->state as MLX5_DEVICE_STATE_INTERNAL_ERROR before requesting the lock. Fixes: c1d4d2e92ad6 ("net/mlx5: Avoid calling sleeping function by the health poll thread") Signed-off-by: Shay Drory <shayd@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-06-11net/mlx5: drain health workqueue in case of driver load errorShay Drory
In case there is a work in the health WQ when we teardown the driver, in driver load error flow, the health work will try to read dev->iseg, which was already unmap in mlx5_pci_close(). Fix it by draining the health workqueue first thing in mlx5_pci_close(). Trace of the error: BUG: unable to handle page fault for address: ffffb5b141c18014 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 1fe95d067 P4D 1fe95d067 PUD 1fe95e067 PMD 1b7823067 PTE 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 6755 Comm: kworker/u128:2 Not tainted 5.2.0-net-next-mlx5-hv_stats-over-last-worked-hyperv #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006 04/28/2016 Workqueue: mlx5_healtha050:00:02.0 mlx5_fw_fatal_reporter_err_work [mlx5_core] RIP: 0010:ioread32be+0x30/0x40 Code: 00 77 27 48 81 ff 00 00 01 00 76 07 0f b7 d7 ed 0f c8 c3 55 48 c7 c6 3b ee d5 9f 48 89 e5 e8 67 fc ff ff b8 ff ff ff ff 5d c3 <8b> 07 0f c8 c3 66 66 2e 0f 1f 84 00 00 00 00 00 48 81 fe ff ff 03 RSP: 0018:ffffb5b14c56fd78 EFLAGS: 00010292 RAX: ffffb5b141c18000 RBX: ffff8e9f78a801c0 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff8e9f7ecd7628 RDI: ffffb5b141c18014 RBP: ffffb5b14c56fd90 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8e9f372a2c30 R11: ffff8e9f87f4bc40 R12: ffff8e9f372a1fc0 R13: ffff8e9f78a80000 R14: ffffffffc07136a0 R15: ffff8e9f78ae6f20 FS: 0000000000000000(0000) GS:ffff8e9f7ecc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffb5b141c18014 CR3: 00000001c8f82006 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? mlx5_health_try_recover+0x4d/0x270 [mlx5_core] mlx5_fw_fatal_reporter_recover+0x16/0x20 [mlx5_core] devlink_health_reporter_recover+0x1c/0x50 devlink_health_report+0xfb/0x240 mlx5_fw_fatal_reporter_err_work+0x65/0xd0 [mlx5_core] process_one_work+0x1fb/0x4e0 ? process_one_work+0x16b/0x4e0 worker_thread+0x4f/0x3d0 kthread+0x10d/0x140 ? process_one_work+0x4e0/0x4e0 ? kthread_cancel_delayed_work_sync+0x20/0x20 ret_from_fork+0x1f/0x30 Modules linked in: nfsv3 rpcsec_gss_krb5 nfsv4 nfs fscache 8021q garp mrp stp llc ipmi_devintf ipmi_msghandler rpcrdma rdma_ucm ib_iser rdma_cm ib_umad iw_cm ib_ipoib libiscsi scsi_transport_iscsi ib_cm mlx5_ib ib_uverbs ib_core mlx5_core sb_edac crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 mlxfw crypto_simd cryptd glue_helper input_leds hyperv_fb intel_rapl_perf joydev serio_raw pci_hyperv pci_hyperv_mini mac_hid hv_balloon nfsd auth_rpcgss nfs_acl lockd grace sunrpc sch_fq_codel ip_tables x_tables autofs4 hv_utils hid_generic hv_storvsc ptp hid_hyperv hid hv_netvsc hyperv_keyboard pps_core scsi_transport_fc psmouse hv_vmbus i2c_piix4 floppy pata_acpi CR2: ffffb5b141c18014 ---[ end trace b12c5503157cad24 ]--- RIP: 0010:ioread32be+0x30/0x40 Code: 00 77 27 48 81 ff 00 00 01 00 76 07 0f b7 d7 ed 0f c8 c3 55 48 c7 c6 3b ee d5 9f 48 89 e5 e8 67 fc ff ff b8 ff ff ff ff 5d c3 <8b> 07 0f c8 c3 66 66 2e 0f 1f 84 00 00 00 00 00 48 81 fe ff ff 03 RSP: 0018:ffffb5b14c56fd78 EFLAGS: 00010292 RAX: ffffb5b141c18000 RBX: ffff8e9f78a801c0 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff8e9f7ecd7628 RDI: ffffb5b141c18014 RBP: ffffb5b14c56fd90 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8e9f372a2c30 R11: ffff8e9f87f4bc40 R12: ffff8e9f372a1fc0 R13: ffff8e9f78a80000 R14: ffffffffc07136a0 R15: ffff8e9f78ae6f20 FS: 0000000000000000(0000) GS:ffff8e9f7ecc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffb5b141c18014 CR3: 00000001c8f82006 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 BUG: sleeping function called from invalid context at ./include/linux/percpu-rwsem.h:38 in_atomic(): 0, irqs_disabled(): 1, pid: 6755, name: kworker/u128:2 INFO: lockdep is turned off. CPU: 3 PID: 6755 Comm: kworker/u128:2 Tainted: G D 5.2.0-net-next-mlx5-hv_stats-over-last-worked-hyperv #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006 04/28/2016 Workqueue: mlx5_healtha050:00:02.0 mlx5_fw_fatal_reporter_err_work [mlx5_core] Call Trace: dump_stack+0x63/0x88 ___might_sleep+0x10a/0x130 __might_sleep+0x4a/0x80 exit_signals+0x33/0x230 ? blocking_notifier_call_chain+0x16/0x20 do_exit+0xb1/0xc30 ? kthread+0x10d/0x140 ? process_one_work+0x4e0/0x4e0 Fixes: 52c368dc3da7 ("net/mlx5: Move health and page alloc init to mdev_init") Signed-off-by: Shay Drory <shayd@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-06-11iavf: increase reset complete wait timePaul Greenwalt
With an increased number of VFs, it's possible to encounter the following issue during reset. iavf b8d4:00:02.0: Hardware reset detected iavf b8d4:00:02.0: Reset never finished (0) iavf b8d4:00:02.0: Reset task did not complete, VF disabled Increase the reset complete wait count to allow for 128 VFs to complete reset. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-11iavf: Fix reporting 2.5 Gb and 5Gb speedsBrett Creeley
Commit 4ae4916b5643 ("i40e: fix 'Unknown bps' in dmesg for 2.5Gb/5Gb speeds") added the ability for the PF to report 2.5 and 5Gb speeds, however, the iavf driver does not recognize those speeds as the values were not added there. Add the proper enums and values so that iavf can properly deal with those speeds. Fixes: 4ae4916b5643 ("i40e: fix 'Unknown bps' in dmesg for 2.5Gb/5Gb speeds") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Witold Fijalkowski <witoldx.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-11iavf: use appropriate enum for comparisonAleksandr Loktionov
adapter->link_speed has type enum virtchnl_link_speed but our comparisons are against enum iavf_aq_link_speed. Though they are, currently, the same values, change the comparison to the matching enum virtchnl_link_speed since that may not always be the case. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-11iavf: fix speed reporting over virtchnlBrett Creeley
Link speeds are communicated over virtchnl using an enum virtchnl_link_speed. Currently, the highest link speed is 40Gbps which leaves us unable to reflect some speeds that an ice VF is capable of. This causes link speed to be misreported on the iavf driver. Allow for communicating link speeds using Mbps so that the proper speed can be reported for an ice VF. Moving away from the enum allows us to communicate future speed changes without requiring a new enum to be added. In order to support communicating link speeds over virtchnl in Mbps the following functionality was added: - Added u32 link_speed_mbps in the iavf_adapter structure. - Added the macro ADV_LINK_SUPPORT(_a) to determine if the VF driver supports communicating link speeds in Mbps. - Added the function iavf_get_vpe_link_status() to fill the correct link_status in the event_data union based on the ADV_LINK_SUPPORT(_a) macro. - Added the function iavf_set_adapter_link_speed_from_vpe() to determine whether or not to fill the u32 link_speed_mbps or enum virtchnl_link_speed link_speed field in the iavf_adapter structure based on the ADV_LINK_SUPPORT(_a) macro. - Do not free vf_res in iavf_init_get_resources() as vf_res will be accessed in iavf_get_link_ksettings(); memset to 0 instead. This memory is subsequently freed in iavf_remove(). Fixes: 7c710869d64e ("ice: Add handlers for VF netdevice operations") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Sergey Nemov <sergey.nemov@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-06-11Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge some more updates from Andrew Morton: - various hotfixes and minor things - hch's use_mm/unuse_mm clearnups Subsystems affected by this patch series: mm/hugetlb, scripts, kcov, lib, nilfs, checkpatch, lib, mm/debug, ocfs2, lib, misc. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: kernel: set USER_DS in kthread_use_mm kernel: better document the use_mm/unuse_mm API contract kernel: move use_mm/unuse_mm to kthread.c kernel: move use_mm/unuse_mm to kthread.c stacktrace: cleanup inconsistent variable type lib: test get_count_order/long in test_bitops.c mm: add comments on pglist_data zones ocfs2: fix spelling mistake and grammar mm/debug_vm_pgtable: fix kernel crash by checking for THP support lib: fix bitmap_parse() on 64-bit big endian archs checkpatch: correct check for kernel parameters doc nilfs2: fix null pointer dereference at nilfs_segctor_do_construct() lib/lz4/lz4_decompress.c: document deliberate use of `&' kcov: check kcov_softirq in kcov_remote_stop() scripts/spelling: add a few more typos khugepaged: selftests: fix timeout condition in wait_for_scan()
2020-06-11Merge tag 'riscv-for-linus-5.8-mw1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - Kconfig select statements are now sorted alphanumerically - first-level interrupts are now handled via a full irqchip driver - CPU hotplug is fixed - vDSO calls now use the common vDSO infrastructure * tag 'riscv-for-linus-5.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: set the permission of vdso_data to read-only riscv: use vDSO common flow to reduce the latency of the time-related functions riscv: fix build warning of missing prototypes RISC-V: Don't mark init section as non-executable RISC-V: Force select RISCV_INTC for CONFIG_RISCV RISC-V: Remove do_IRQ() function clocksource/drivers/timer-riscv: Use per-CPU timer interrupt irqchip: RISC-V per-HART local interrupt controller driver RISC-V: Rename and move plic_find_hart_id() to arch directory RISC-V: self-contained IPI handling routine RISC-V: Sort select statements alphanumerically
2020-06-11Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "arm64 fixes that came in during the merge window. There will probably be more to come, but it doesn't seem like it's worth me sitting on these in the meantime. - Fix SCS debug check to report max stack usage in bytes as advertised - Fix typo: CONFIG_FTRACE_WITH_REGS => CONFIG_DYNAMIC_FTRACE_WITH_REGS - Fix incorrect mask in HiSilicon L3C perf PMU driver - Fix compat vDSO compilation under some toolchain configurations - Fix false UBSAN warning from ACPI IORT parsing code - Fix booting under bootloaders that ignore TEXT_OFFSET - Annotate debug initcall function with '__init'" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: warn on incorrect placement of the kernel by the bootloader arm64: acpi: fix UBSAN warning arm64: vdso32: add CONFIG_THUMB2_COMPAT_VDSO drivers/perf: hisi: Fix wrong value for all counters enable arm64: ftrace: Change CONFIG_FTRACE_WITH_REGS to CONFIG_DYNAMIC_FTRACE_WITH_REGS arm64: debug: mark a function as __init to save some memory scs: Report SCS usage in bytes rather than number of entries
2020-06-11ionic: remove support for mgmt deviceShannon Nelson
We no longer support the mgmt device in the ionic driver, so remove the device id and related code. Fixes: b3f064e9746d ("ionic: add support for device id 0x1004") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-11Merge tag 'mailbox-v5.8' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: "qcom: - new controller driver for IPCC - reorg the of_device data - add support for ipq6018 platform spreadtrum: - new sprd controller driver imx: - implement suspend/resume PM support misc: - make pcc driver struct static - fix return value in imx_mu_scu - disable clock before bailout in imx probe - remove duplicate error mssg in zynqmp probe - fix header size in imx.scu - check for null instead of is-err in zynqmp" * tag 'mailbox-v5.8' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: qcom: Add ipq6018 apcs compatible mailbox: qcom: Add clock driver name in apcs mailbox driver data dt-bindings: mailbox: Add YAML schemas for QCOM APCS global block mailbox: imx: ONLY IPC MU needs IRQF_NO_SUSPEND flag mailbox: imx: Add runtime PM callback to handle MU clocks mailbox: imx: Add context save/restore for suspend/resume MAINTAINERS: Add entry for Qualcomm IPCC driver mailbox: Add support for Qualcomm IPCC dt-bindings: mailbox: Add devicetree binding for Qcom IPCC mailbox: zynqmp-ipi: Fix NULL vs IS_ERR() check in zynqmp_ipi_mbox_probe() mailbox: imx-mailbox: fix scu msg header size check mailbox: sprd: Add Spreadtrum mailbox driver dt-bindings: mailbox: Add the Spreadtrum mailbox documentation mailbox: ZynqMP IPI: Delete an error message in zynqmp_ipi_probe() mailbox: imx: Disable the clock on devm_mbox_controller_register() failure mailbox: imx: Fix return in imx_mu_scu_xlate() mailbox: imx: Support runtime PM mailbox: pcc: make pcc_mbox_driver static
2020-06-11drivers: dpaa2: Use devm_kcalloc() in setup_dpni()Xu Wang
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kcalloc". Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-11Merge tag 'drm-next-2020-06-11-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "One sun4i fix and a connector hotplug race The ast fix is for a regression in 5.6, and one of the i915 ones fixes an oops reported by dhowells. core: - fix race in connectors sending hotplug i915: - Avoid use after free in cmdparser - Avoid NULL dereference when probing all display encoders - Fixup to module parameter type sun4i: - clock divider fix ast: - 24/32 bpp mode setting fix" * tag 'drm-next-2020-06-11-1' of git://anongit.freedesktop.org/drm/drm: drm/ast: fix missing break in switch statement for format->cpp[0] case 4 drm/sun4i: hdmi ddc clk: Fix size of m divider drm/i915/display: Only query DP state of a DDI encoder drm/i915/params: fix i915.reset module param type drm/i915/gem: Mark the buffer pool as active for the cmdparser drm/connector: notify userspace on hotplug after register complete
2020-06-11Rebase locking/kcsan to locking/urgentThomas Gleixner
Merge the state of the locking kcsan branch before the read/write_once() and the atomics modifications got merged. Squash the fallout of the rebase on top of the read/write once and atomic fallback work into the merge. The history of the original branch is preserved in tag locking-kcsan-2020-06-02. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2020-06-11Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "A number of fixes to the omap and nitrox drivers" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: cavium/nitrox - Fix 'nitrox_get_first_device()' when ndevlist is fully iterated crypto: omap-sham - add proper load balancing support for multicore crypto: omap-aes - prevent unregistering algorithms twice crypto: omap-sham - fix very small data size handling crypto: omap-sham - huge buffer access fixes crypto: omap-crypto - fix userspace copied buffer access crypto: omap-sham - force kernel driver usage for sha algos crypto: omap-aes - avoid spamming console with self tests
2020-06-11media: rkvdec: Fix H264 scaling list orderJonas Karlman
The Rockchip Video Decoder driver is expecting that the values in a scaling list are in zig-zag order and applies the inverse scanning process to get the values in matrix order. Commit 0b0393d59eb4 ("media: uapi: h264: clarify expected scaling_list_4x4/8x8 order") clarified that the values in the scaling list should already be in matrix order. Fix this by removing the reordering and change to use two memcpy. Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> [hverkuil-cisco@xs4all.nl: rkvdec_scaling_matrix -> rkvdec_h264_scaling_list] Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>