summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-10-16drm/i915/selftests: Teach guc to take intel_gt as its argumentChris Wilson
The guc selftests are hardware^W firmare centric and so want to use the gt as its target. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191016115311.12894-1-chris@chris-wilson.co.uk
2019-10-16drm/i915/selftests: Teach execlists to take intel_gt as its argumentChris Wilson
The execlists selftests are hardware centric and so want to use the gt as its target. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191016120249.22714-1-chris@chris-wilson.co.uk
2019-10-16drm/i915: Introduce Jasper Lake PCHMatt Roper
The Jasper Lake PCH follows ICP/TGP's south display behavior and is identical to MCC graphics-wise except that it does not use the unusual (port C -> TC1) pin mapping that MCC does. Also, it turns out the extra PCH ID that we had previously thought was a form of MCC is actually a second ID for JSP (i.e., port C uses the port C pins instead of the TC1 pins). v2: - Also update the port masks (not just the pin table) in mcc_hpd_irq_setup. (Vivek) v3: - Break jsp_hpd_irq_setup out into its own function for clarity. (Vivek) Cc: José Roberto de Souza <jose.souza@intel.com> Cc: James Ausmus <james.ausmus@intel.com> Cc: Vivek Kasireddy <vivek.kasireddy@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191015162854.30546-1-matthew.d.roper@intel.com
2019-10-16drm/i915/ehl: Don't forget to set TC long detect functionMatt Roper
Since EHL's MCC PCH reuses one of the TC pins we need to supply a TC long detect function when handling the interrupts. Fixes: 53448aed7b80 ("drm/i915/ehl: Port C's hotplug interrupt is associated with TC1 bits") Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Vivek Kasireddy <vivek.kasireddy@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191015161131.21239-1-matthew.d.roper@intel.com Reviewed-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
2019-10-16drm/i915: Prepare the mode readout for hw vs. uapi state splitVille Syrjälä
Prepare the mode readout for the uapi vs. hw state split. We'll want to do all readout into the hw state. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190927131432.15978-4-ville.syrjala@linux.intel.com
2019-10-16drm/i915: Prepare the connector/encoder mask readout for hw vs. uapi state splitVille Syrjälä
Prepare the connector/encoder mask readout for the uapi vs. hw state split. We'll want to do all readout into the hw state. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190927131432.15978-2-ville.syrjala@linux.intel.com
2019-10-16drm/i915: Switch intel_legacy_cursor_update() to intel_ typesVille Syrjälä
Prefer the intel_ types in intel_legacy_cursor_update() over the drm_ types. Should make it easier to adapt this to the uapi vs. hw state split. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190927131432.15978-1-ville.syrjala@linux.intel.com
2019-10-16drm/i915: Refactor timestamping constants updateVille Syrjälä
Once we do the hw vs. uapi split we can no longer use drm_atomic_helper_calc_timestamping_constants() as it'll consult the uapi state instead of the hw state. So let's just update the vblank timestamping constants whenever we update the scanline offset. We use both to convert the hw scanline count to something which matches the software timing values. First I thought to put these into intel_crtc_vblank_on() but we may want to get the scanline counter value before that (eg. from some early tracepoints), so let's stick to updating them a bit earlier than intel_crtc_vblank_on(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191007114943.29307-3-ville.syrjala@linux.intel.com
2019-10-16drm/i915/execlist: Trim immediate timeslice expiryChris Wilson
We perform timeslicing immediately upon receipt of a request that may be put into the second ELSP slot. The idea behind this was that since we didn't install the timer if the second ELSP slot was empty, we would not have any idea of how long ELSP[0] had been running and so giving the newcomer a chance on the GPU was fair. However, this causes us extra busy work that we may be able to avoid if we wait a jiffie for the first timeslice as normal. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191016100851.4979-1-chris@chris-wilson.co.uk
2019-10-16drm/i915/selftests: Drop stale struct_mutexChris Wilson
A lately added test was missed when applying the struct_mutex removal patches. Do so now. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191015085911.10317-1-chris@chris-wilson.co.uk
2019-10-15drm/i915/tgl: Wa_1607138340Mika Kuoppala
Avoid possible cs hang with semaphores by disabling lite restore. Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-11-mika.kuoppala@linux.intel.com
2019-10-15drm/i915/tgl: Wa_1607030317, Wa_1607186500, Wa_1607297627Mika Kuoppala
Disable semaphore idle messages and wait for event power downs. Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-10-mika.kuoppala@linux.intel.com
2019-10-15drm/i915/tgl: Wa_1607138336Mika Kuoppala
Avoid possible deadlock on context switch. Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-9-mika.kuoppala@linux.intel.com
2019-10-15drm/i915/tgl: Wa_1409600907Mika Kuoppala
To avoid possible hang, we need to add depth stall if we flush the depth cache. Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-8-mika.kuoppala@linux.intel.com
2019-10-15drm/i915/tgl: Wa_1409170338Mika Kuoppala
Avoid possible hang in tsg,vfe units by keeping l3 clocks runnings. Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-7-mika.kuoppala@linux.intel.com
2019-10-15drm/i915/tgl: Wa_1409420604Mika Kuoppala
Avoid possible hang in CPSS unit. Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-6-mika.kuoppala@linux.intel.com
2019-10-15drm/i915/tgl: Keep FF dop clock enabled for A0Mika Kuoppala
To ensure correct state data for compute workloads, we need to keep the ff dop clock enabled. References: HSDES#1606700617 Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-5-mika.kuoppala@linux.intel.com
2019-10-15drm/i915/tgl: Add extra hdc flush workaroundMika Kuoppala
In order to ensure constant caches are invalidated properly with a0, we need extra hdc flush after invalidation. v2: use IS_TGL_REVID (Chris) References: HSDES#1604544889 Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-4-mika.kuoppala@linux.intel.com
2019-10-15drm/i915/tgl: Add HDC Pipeline FlushMika Kuoppala
Add hdc pipeline flush to ensure memory state is coherent in L3 when we are done. v2: Flush also in breadcrumbs (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-3-mika.kuoppala@linux.intel.com
2019-10-15drm/i915/tgl: Include ro parts of l3 to invalidateMika Kuoppala
Aim for completeness and invalidate also the ro parts in l3 cache. This might allow to get rid of the preparser disable/enable workaround on invalidation path. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-2-mika.kuoppala@linux.intel.com
2019-10-15drm/i915/tgl: Add IS_TGL_REVIDMika Kuoppala
We are going to need this macro on limiting the workaround scope. Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-1-mika.kuoppala@linux.intel.com
2019-10-15drm/i915/icl: Wa_1607087056Mika Kuoppala
Avoid possible hang in tsg,vfe units by keeping l3 clocks runnings. Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191015154411.9984-1-mika.kuoppala@linux.intel.com
2019-10-15drm/i915: Flush tasklet submission before sleeping on i915_request_waitChris Wilson
If the system is being slow and userspace is racing ahead of the GPU and finds itself waiting for the GPU to catch up, before the process sleeps give the tasklet a kick, bypassing ksoftirqd. If the system is overloaded, then ksoftirqd may be delayed incurring additional latency to our user. This should not be a frequent problem, but in the past we have observed several hundred millisecond delays before ksoftirqd services an interrupt, so burn a few cycles to lend a helping hand. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191015132606.14349-1-chris@chris-wilson.co.uk
2019-10-15drm/i915: Use drm_rect_init()Ville Syrjälä
Use the new drm_rect_init() helper where appropriate. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190930134214.24702-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2019-10-15drm/i915: Use drm_rect_translate_to()Ville Syrjälä
Use the newly introduced drm_rect_translate_to() instead of hand rolling it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190930134214.24702-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2019-10-15drm/i915: Make .modeset_calc_cdclk() mandatoryVille Syrjälä
While not all platforms allow us to change the cdclk frequency we should still verify that the fixed cdclk frequency isn't too low. To that end let's cook up a .modeset_calc_cdclk() implementation that only does the min_cdclk vs. actual cdclk frequency check for such platforms. Also we mustn't forget about double wide pipe on gen2/3 when doing this. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190708125325.16576-11-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2019-10-15drm/i915: Stop using drm_atomic_helper_check_planes()Ville Syrjälä
We need to insert stuff between the plane and crtc .atomic_check() drm_atomic_helper_check_planes() doesn't allow us to do that so stop using it and hand roll the loops instead. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190708125325.16576-9-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
2019-10-15drm/i915: Switch to using DP_MSA_MISC_* definesVille Syrjälä
Now that we have standard defines for the MSA MISC bits lets use them on HSW+ where we program these directly into the TRANS_MSA_MISC register. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190718145053.25808-7-ville.syrjala@linux.intel.com Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
2019-10-15drm/i915/dp: Attach HDR metadata property to DP connectorGwan-gyeong Mun
It attaches HDR metadata property to DP connector on GLK+. It enables HDR metadata infoframe sdp on GLK+ to be used to send HDR metadata to DP sink. v2: Minor style fix Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-9-gwan-gyeong.mun@intel.com
2019-10-15drm/i915/dp: Program an Infoframe SDP Header and DB for HDR Static MetadataGwan-gyeong Mun
Function intel_dp_setup_hdr_metadata_infoframe_sdp handles Infoframe SDP header and data block setup for HDR Static Metadata. It enables writing of HDR metadata infoframe SDP to panel. Support for HDR video was introduced in DisplayPort 1.4. It implements the CTA-861-G standard for transport of static HDR metadata. The HDR Metadata will be provided by userspace compositors, based on blending policies and passed to the driver through a blob property. Because each of GEN11 and prior GEN11 have different register size for HDR Metadata Infoframe SDP packet, it adds and uses different register size. Setup Infoframe SDP header and data block in function intel_dp_setup_hdr_metadata_infoframe_sdp for HDR Static Metadata as per dp 1.4 spec and CTA-861-F spec. As per DP 1.4 spec, 2.2.2.5 SDP Formats. It enables Dynamic Range and Mastering Infoframe for HDR content, which is defined in CTA-861-F spec. According to DP 1.4 spec and CEA-861-F spec Table 5, in order to transmit static HDR metadata, we have to use Non-audio INFOFRAME SDP v1.3. +--------------------------------+-------------------------------+ | [ Packet Type Value ] | [ Packet Type ] | +--------------------------------+-------------------------------+ | 80h + Non-audio INFOFRAME Type | CEA-861-F Non-audio INFOFRAME | +--------------------------------+-------------------------------+ | [Transmission Timing] | +----------------------------------------------------------------+ | As per CEA-861-F for INFOFRAME, including CEA-861.3 within | | which Dynamic Range and Mastering INFOFRAME are defined | +----------------------------------------------------------------+ v2: Add a missed blank line after function declaration. v3: Remove not handled return values from intel_dp_setup_hdr_metadata_infoframe_sdp(). [Uma] v9: Addressed review comments from Ville. - Add BUILD_BUG_ON to check a changing of struct dp_sdp size. - Change a passed size toward write_infoframe() for DP infoframe sdp packet for HDR static metadata. Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-8-gwan-gyeong.mun@intel.com
2019-10-15drm/i915: Add new GMP register size for GEN11Gwan-gyeong Mun
According to Bspec, GEN11 and prior GEN11 have different register size for HDR Metadata Infoframe SDP packet. It adds new VIDEO_DIP_GMP_DATA_SIZE for GEN11. And it makes handle different register size for HDMI_PACKET_TYPE_GAMUT_METADATA on hsw_dip_data_size() for each GEN platforms. It addresses Uma's review comments. v9: Add WARN_ON() when buffer size if larger than register size. [Ville] Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-7-gwan-gyeong.mun@intel.com
2019-10-15drm/i915/dp: Attach colorspace propertyGwan-gyeong Mun
It attaches the colorspace connector property to a DisplayPort connector. Based on colorspace change, modeset will be triggered to switch to a new colorspace. And in order to distinguish colorspace bwtween DP and HDMI connector, it adds a handling of drm_mode_create_dp_colorspace_property() to intel_attach_colorspace_property(). Based on colorspace property value create a VSC SDP packet with appropriate colorspace. This would help to enable wider color gamut like BT2020 on a sink device. v9: Addressed review comments from Ville - Add a handling of drm_mode_create_dp_colorspace_property() to intel_attach_colorspace_property(). This hunk moved from the previous commit. Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-6-gwan-gyeong.mun@intel.com
2019-10-15drm/i915/dp: Add support of BT.2020 Colorimetry to DP MSAGwan-gyeong Mun
When BT.2020 Colorimetry output is used for DP, we should program BT.2020 Colorimetry to MSA and VSC SDP. In order to handle colorspace of drm_connector_state, it moves a calling of intel_ddi_set_pipe_settings() function into intel_ddi_pre_enable_dp(). And it also rename intel_ddi_set_pipe_settings() to intel_ddi_set_dp_msa(). As per DP 1.4a spec section 2.2.4 [MSA Data Transport] The MSA data that the DP Source device transports for reproducing the main video stream. Attribute data is sent once per frame during the main video stream’s vertical blanking period. In order to distinguish needed colorimetry for VSC SDP, it adds intel_dp_needs_vsc_sdp function. If the output colorspace requires vsc sdp or output format is YCbCr 4:2:0, it uses MSA with VSC SDP. As per DP 1.4a spec section 2.2.4.3 [MSA Field for Indication of Color Encoding Format and Content Color Gamut] while sending BT.2020 Colorimetry signals we should program MSA MISC1 fields which indicate VSC SDP for the Pixel Encoding/Colorimetry Format. v2: Remove useless parentheses v3: Addressed review comments from Ville - In order to checking output format and output colorspace on intel_dp_needs_vsc_sdp(), it passes entire intel_crtc_state struct value. - Remove a pointless variable. v9: Addressed review comments from Ville - Remove a duplicated output color space from intel_crtc_state. - In order to handle colorspace of drm_connector_state, it moves a calling of intel_ddi_set_pipe_settings() function into intel_ddi_pre_enable_dp(). Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-3-gwan-gyeong.mun@intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2019-10-15drm/i915/dp: Extend program of VSC Header and DB for Colorimetry FormatGwan-gyeong Mun
It refactors and renames a function which handled vsc sdp header and data block setup for supporting colorimetry format. Function intel_dp_setup_vsc_sdp handles vsc sdp header and data block setup for pixel encoding / colorimetry format. In order to use colorspace information of a connector, it adds an argument of drm_connector_state type. Setup VSC header and data block in function intel_dp_setup_vsc_sdp for pixel encoding / colorimetry format as per dp 1.4a spec, section 2.2.5.7.1, table 2-119: VSC SDP Header Bytes, section 2.2.5.7.5, table 2-120: VSC SDP Payload for DB16 through DB18. Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-2-gwan-gyeong.mun@intel.com
2019-10-15drm/i915/execlists: Clear semaphore immediately upon ELSP promotionChris Wilson
There is no significance to our delay before clearing the semaphore the engine is waiting on, so release it as soon as we acknowledge the CS update following our preemption request. This should allow the GPU to resume work earlier, if it was stuck on the semaphore at the end of a request. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191015093204.25693-1-chris@chris-wilson.co.uk
2019-10-15drm/i915: Remove leftover vma->obj->pages_pin_count on insert/removeChris Wilson
We now do the page pin count upfront in vma_get_pages/vma_put_pages, so that we do the allocations before we enter the vm->mutex. Our vma page references we are tracked in vma->pages_count and the extra obj->pages_pin_count being performed later in i915_vma_insert and i915_vma_remove is redundant, and worse throws off the shrinker's logic on when it can free an object by unbinding it. Reported-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reported-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191015100155.10376-1-chris@chris-wilson.co.uk
2019-10-15drm/i915: Drop obj.page_pin_count after a failed vma->set_pages()Chris Wilson
Before we attempt to set_pages on the vma, we claim a obj.pages_pin_count for it. If we subsequently fail to set the pages on the vma, we need to drop our pinning before returning the error. Reported-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191015093915.3995-1-chris@chris-wilson.co.uk
2019-10-15Merge drm/drm-next into drm-intel-next-queuedJoonas Lahtinen
Backmerging to pull in HDR DP code: https://lists.freedesktop.org/archives/dri-devel/2019-September/236453.html Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-10-14drm/i915/perf: allow holding preemption on filtered ctxLionel Landwerlin
We would like to make use of perf in Vulkan. The Vulkan API is much lower level than OpenGL, with applications directly exposed to the concept of command buffers (pretty much equivalent to our batch buffers). In Vulkan, queries are always limited in scope to a command buffer. In OpenGL, the lack of command buffer concept meant that queries' duration could span multiple command buffers. With that restriction gone in Vulkan, we would like to simplify measuring performance just by measuring the deltas between the counter snapshots written by 2 MI_RECORD_PERF_COUNT commands, rather than the more complex scheme we currently have in the GL driver, using 2 MI_RECORD_PERF_COUNT commands and doing some post processing on the stream of OA reports, coming from the global OA buffer, to remove any unrelated deltas in between the 2 MI_RECORD_PERF_COUNT. Disabling preemption only apply to a single context with which want to query performance counters for and is considered a privileged operation, by default protected by CAP_SYS_ADMIN. It is possible to enable it for a normal user by disabling the paranoid stream setting. v2: Store preemption setting in intel_context (Chris) v3: Use priorities to avoid preemption rather than the HW mechanism v4: Just modify the port priority reporting function v5: Add nopreempt flag on gem context and always flag requests appropriately, regarless of OA reconfiguration. Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/932 Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191014201404.22468-4-chris@chris-wilson.co.uk
2019-10-14drm/i915/perf: Allow dynamic reconfiguration of the OA streamChris Wilson
Introduce a new perf_ioctl command to change the OA configuration of the active stream. This allows the OA stream to be reconfigured between batch buffers, giving greater flexibility in sampling. We inject a request into the OA context to reconfigure the stream asynchronously on the GPU in between and ordered with execbuffer calls. Original patch for dynamic reconfiguration by Lionel Landwerlin. Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/932 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191014201404.22468-3-chris@chris-wilson.co.uk
2019-10-14drm/i915: add support for perf configuration queriesLionel Landwerlin
Listing configurations at the moment is supported only through sysfs. This might cause issues for applications wanting to list configurations from a container where sysfs isn't available. This change adds a way to query the number of configurations and their content through the i915 query uAPI. v2: Fix sparse warnings (Lionel) Add support to query configuration using uuid (Lionel) v3: Fix some inconsistency in uapi header (Lionel) Fix unlocking when not locked issue (Lionel) Add debug messages (Lionel) v4: Fix missing unlock (Dan) v5: Drop lock when copying config content to userspace (Chris) v6: Drop lock when copying config list to userspace (Chris) Fix deadlock when calling i915_perf_get_oa_config() under perf.metrics_lock (Lionel) Add i915_oa_config_get() (Chris) Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/932 Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191014201404.22468-2-chris@chris-wilson.co.uk
2019-10-14drm/i915/perf: introduce a versioning of the i915-perf uapiLionel Landwerlin
Reporting this version will help application figure out what level of the support the running kernel provides. v2: Add i915_perf_ioctl_version() (Chris) Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191014201404.22468-1-chris@chris-wilson.co.uk
2019-10-14drm/i915/execlists: Assert tasklet is locked for process_csb()Chris Wilson
We rely on only the tasklet being allowed to call into process_csb(), so assert that is locked when we do. As the tasklet uses a simple bitlock, there is no strong lockdep checking so we must make do with a plain assertion that the tasklet is running and assume that we are the tasklet! v2: Fixup intel_gt_sanitize() to prepare each engine for the reset so that the locks are marked as held during the reset v3: Check for existent function pointers for very early sanitisation. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191014121336.30137-1-chris@chris-wilson.co.uk
2019-10-14drm/i915/ehl: Port C's hotplug interrupt is associated with TC1 bitsVivek Kasireddy
On platforms that have the MCC PCH, Port C's hotplug interrupt bits are mapped to TC1 bits. Suggested-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191011002618.3087-1-vivek.kasireddy@intel.com
2019-10-14drm/i915: Favor last VBT child device with conflicting AUX ch/DDC pinVille Syrjälä
The first come first served apporoach to handling the VBT child device AUX ch conflicts has backfired. We have machines in the wild where the VBT specifies both port A eDP and port E DP (in that order) with port E being the real one. So let's try to flip the preference around and let the last child device win once again. Cc: stable@vger.kernel.org Cc: Jani Nikula <jani.nikula@intel.com> Tested-by: Masami Ichikawa <masami256@gmail.com> Tested-by: Torsten <freedesktop201910@liggy.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111966 Fixes: 36a0f92020dc ("drm/i915/bios: make child device order the priority order") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191011202030.8829-1-ville.syrjala@linux.intel.com Acked-by: Jani Nikula <jani.nikula@intel.com>
2019-10-14drm/i915/execlists: Tweak virtual unsubmissionChris Wilson
Since commit e2144503bf3b ("drm/i915: Prevent bonded requests from overtaking each other on preemption") we have restricted requests to run on their chosen engine across preemption events. We can take this restriction into account to know that we will want to resubmit those requests onto the same physical engine, and so can shortcircuit the virtual engine selection process and keep the request on the same engine during unwind. References: e2144503bf3b ("drm/i915: Prevent bonded requests from overtaking each other on preemption") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Ramlingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191013203012.25208-1-chris@chris-wilson.co.uk
2019-10-14drm/i915/selftests: Check that GPR are cleared for new contextsChris Wilson
We want the general purpose registers to be clear in all new contexts so that we can be confident that no information is leaked from one to the next. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191014090757.32111-7-chris@chris-wilson.co.uk
2019-10-14drm/i915/selftests: Check known register values within the contextChris Wilson
Check the logical ring context by asserting that the registers hold expected start during execution. (It's a bit chicken-and-egg for how could we manage to execute our request if the registers were not being updated. Still, it's nice to verify that the HW is working as expected.) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191014090757.32111-6-chris@chris-wilson.co.uk
2019-10-14drm/i915/display: Squelch kerneldoc warningsChris Wilson
Just a parameter rename, drivers/gpu/drm/i915/display/intel_display.c:14425: warning: Function parameter or member '_new_plane_state' not described in 'intel_prepare_plane_fb' drivers/gpu/drm/i915/display/intel_display.c:14425: warning: Excess function parameter 'new_state' description in 'intel_prepare_plane_fb' drivers/gpu/drm/i915/display/intel_display.c:14534: warning: Function parameter or member '_old_plane_state' not described in 'intel_cleanup_plane_fb' drivers/gpu/drm/i915/display/intel_display.c:14534: warning: Excess function parameter 'old_state' description in 'intel_cleanup_plane_fb' Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191012080208.18774-1-chris@chris-wilson.co.uk
2019-10-14drm/i915/selftests: Fixup naked 64b divideChris Wilson
drivers/gpu/drm/i915/intel_memory_region.o: in function `igt_mock_contiguous': drivers/gpu/drm/i915/selftests/intel_memory_region.c:166: undefined reference to `__umoddi3' v2: promote target to u64 for consistency across all builds Reported-by: kbuild test robot <lkp@intel.com> Fixes: 2f0b97ca0211 ("drm/i915/region: support contiguous allocations") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191013114509.3405-1-chris@chris-wilson.co.uk
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-21 20:06:21 +0000