| Age | Commit message (Collapse) | Author |
|---|
|
Pull more block updates from Jens Axboe:
"Some later additions that weren't quite done for the first pull
request, and also a few fixes that have arrived since.
This contains:
- Kill silly pktcdvd warning on attempting to register a non-scsi
passthrough device (me)
- Use symbolic constants for the block t10 protection types, and
switch to handling it in core rather than in the drivers (Max)
- libahci platform missing node put fix (Nishka)
- Small series of fixes for BFQ (Paolo)
- Fix possible nbd crash (Xiubo)"
* tag 'for-5.4/post-2019-09-24' of git://git.kernel.dk/linux-block:
block: drop device references in bsg_queue_rq()
block: t10-pi: fix -Wswitch warning
pktcdvd: remove warning on attempting to register non-passthrough dev
ata: libahci_platform: Add of_node_put() before loop exit
nbd: fix possible page fault for nbd disk
nbd: rename the runtime flags as NBD_RT_ prefixed
block, bfq: push up injection only after setting service time
block, bfq: increase update frequency of inject limit
block, bfq: reduce upper bound for inject limit to max_rq_in_driver+1
block, bfq: update inject limit only after injection occurred
block: centralize PI remapping logic to the block layer
block: use symbolic constants for t10_pi type
|
|
Merge updates from Andrew Morton:
- a few hot fixes
- ocfs2 updates
- almost all of -mm (slab-generic, slab, slub, kmemleak, kasan,
cleanups, debug, pagecache, memcg, gup, pagemap, memory-hotplug,
sparsemem, vmalloc, initialization, z3fold, compaction, mempolicy,
oom-kill, hugetlb, migration, thp, mmap, madvise, shmem, zswap,
zsmalloc)
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (132 commits)
mm/zsmalloc.c: fix a -Wunused-function warning
zswap: do not map same object twice
zswap: use movable memory if zpool support allocate movable memory
zpool: add malloc_support_movable to zpool_driver
shmem: fix obsolete comment in shmem_getpage_gfp()
mm/madvise: reduce code duplication in error handling paths
mm: mmap: increase sockets maximum memory size pgoff for 32bits
mm/mmap.c: refine find_vma_prev() with rb_last()
riscv: make mmap allocation top-down by default
mips: use generic mmap top-down layout and brk randomization
mips: replace arch specific way to determine 32bit task with generic version
mips: adjust brk randomization offset to fit generic version
mips: use STACK_TOP when computing mmap base address
mips: properly account for stack randomization and stack guard gap
arm: use generic mmap top-down layout and brk randomization
arm: use STACK_TOP when computing mmap base address
arm: properly account for stack randomization and stack guard gap
arm64, mm: make randomization selected by generic topdown mmap layout
arm64, mm: move generic mmap layout functions to mm
arm64: consider stack randomization for mmap base only when necessary
...
|
|
In preparation for non-shmem THP, this patch adds a few stats and exposes
them in /proc/meminfo, /sys/bus/node/devices/<node>/meminfo, and
/proc/<pid>/task/<tid>/smaps.
This patch is mostly a rewrite of Kirill A. Shutemov's earlier version:
https://lkml.kernel.org/r/20170126115819.58875-5-kirill.shutemov@linux.intel.com/
Link: http://lkml.kernel.org/r/20190801184244.3169074-5-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Rik van Riel <riel@surriel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Each memory block spans the same amount of sections/pages/bytes. The size
is determined before the first memory block is created. No need to store
what we can easily calculate - and the calculations even look simpler now.
Michal brought up the idea of variable-sized memory blocks. However, if
we ever implement something like this, we will need an API compatibility
switch and reworks at various places (most code assumes a fixed memory
block size). So let's cleanup what we have right now.
While at it, fix the variable naming in register_mem_sect_under_node() -
we no longer talk about a single section.
Link: http://lkml.kernel.org/r/20190809110200.2746-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Let's validate the memory block size early, when initializing the memory
device infrastructure. Fail hard in case the value is not suitable.
As nobody checks the return value of memory_dev_init(), turn it into a
void function and fail with a panic in all scenarios instead. Otherwise,
we'll crash later during boot when core/drivers expect that the memory
device infrastructure (including memory_block_size_bytes()) works as
expected.
I think long term, we should move the whole memory block size
configuration (set_memory_block_size_order() and
memory_block_size_bytes()) into drivers/base/memory.c.
Link: http://lkml.kernel.org/r/20190806090142.22709-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
removable/phys_index/block_size_bytes
Let's rephrase to memory block terminology and add some further
clarifications.
Link: http://lkml.kernel.org/r/20190806080826.5963-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We don't allow to offline memory block devices that belong to multiple
numa nodes. Therefore, such devices can never get removed. It is
sufficient to process a single node when removing the memory block. No
need to iterate over each and every PFN.
We already have the nid stored for each memory block. Make sure that the
nid always has a sane value.
Please note that checking for node_online(nid) is not required. If we
would have a memory block belonging to a node that is no longer offline,
then we would have a BUG in the node offlining code.
Link: http://lkml.kernel.org/r/20190719135244.15242-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For pages that were retained via get_user_pages*(), release those pages
via the new put_user_page*() routines, instead of via put_page() or
release_pages().
This is part a tree-wide conversion, as described in fc1d8e7cca2d ("mm:
introduce put_user_page*(), placeholder versions").
Also reverse the order of a comparison, in order to placate checkpatch.pl.
Link: http://lkml.kernel.org/r/20190724044537.10458-3-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
[11~From: John Hubbard <jhubbard@nvidia.com>
Subject: mm/gup: add make_dirty arg to put_user_pages_dirty_lock()
Patch series "mm/gup: add make_dirty arg to put_user_pages_dirty_lock()",
v3.
There are about 50+ patches in my tree [2], and I'll be sending out the
remaining ones in a few more groups:
* The block/bio related changes (Jerome mostly wrote those, but I've had
to move stuff around extensively, and add a little code)
* mm/ changes
* other subsystem patches
* an RFC that shows the current state of the tracking patch set. That
can only be applied after all call sites are converted, but it's good to
get an early look at it.
This is part a tree-wide conversion, as described in fc1d8e7cca2d ("mm:
introduce put_user_page*(), placeholder versions").
This patch (of 3):
Provide more capable variation of put_user_pages_dirty_lock(), and delete
put_user_pages_dirty(). This is based on the following:
1. Lots of call sites become simpler if a bool is passed into
put_user_page*(), instead of making the call site choose which
put_user_page*() variant to call.
2. Christoph Hellwig's observation that set_page_dirty_lock() is
usually correct, and set_page_dirty() is usually a bug, or at least
questionable, within a put_user_page*() calling chain.
This leads to the following API choices:
* put_user_pages_dirty_lock(page, npages, make_dirty)
* There is no put_user_pages_dirty(). You have to
hand code that, in the rare case that it's
required.
[jhubbard@nvidia.com: remove unused variable in siw_free_plist()]
Link: http://lkml.kernel.org/r/20190729074306.10368-1-jhubbard@nvidia.com
Link: http://lkml.kernel.org/r/20190724044537.10458-2-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Replace PAGE_SHIFT + compound_order(page) with the new page_shift()
function. Minor improvements in readability.
[akpm@linux-foundation.org: fix build in tce_page_is_contained()]
Link: http://lkml.kernel.org/r/201907241853.yNQTrJWd%25lkp@intel.com
Link: http://lkml.kernel.org/r/20190721104612.19120-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Make working with compound pages easier", v2.
These three patches add three helpers and convert the appropriate
places to use them.
This patch (of 3):
It's unnecessarily hard to find out the size of a potentially huge page.
Replace 'PAGE_SIZE << compound_order(page)' with page_size(page).
Link: http://lkml.kernel.org/r/20190721104612.19120-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform-drivers fixes from Andy Shevchenko:
- Fix compilation error of ASUS WMI driver when CONFIG_ACPI_BATTERY=n
- Fix I²C multi-instantiate driver to work with several USB PD devices
- Fix boot issue on Siemens SIMATIC IPC277E when PMC critical clock is
being disabled
- Plenty of fixes to Intel Speed-Select Technology tools
* tag 'platform-drivers-x86-v5.4-2' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: i2c-multi-instantiate: Derive the device name from parent
platform/x86: pmc_atom: Add Siemens SIMATIC IPC277E to critclk_systems DMI table
tools/power/x86/intel-speed-select: Fix perf-profile command output
tools/power/x86/intel-speed-select: Extend core-power command set
tools/power/x86/intel-speed-select: Fix some debug prints
tools/power/x86/intel-speed-select: Format get-assoc information
tools/power/x86/intel-speed-select: Allow online/offline based on tdp
tools/power/x86/intel-speed-select: Fix high priority core mask over count
platform/x86: asus-wmi: Make it depend on ACPI battery API
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Sasha Levin:
- first round of vmbus hibernation support (Dexuan Cui)
- remove dependencies on PAGE_SIZE (Maya Nakamura)
- move the hyper-v tools/ code into the tools build system (Andy
Shevchenko)
- hyper-v balloon cleanups (Dexuan Cui)
* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Resume after fixing up old primary channels
Drivers: hv: vmbus: Suspend after cleaning up hv_sock and sub channels
Drivers: hv: vmbus: Clean up hv_sock channels by force upon suspend
Drivers: hv: vmbus: Suspend/resume the vmbus itself for hibernation
Drivers: hv: vmbus: Ignore the offers when resuming from hibernation
Drivers: hv: vmbus: Implement suspend/resume for VSC drivers for hibernation
Drivers: hv: vmbus: Add a helper function is_sub_channel()
Drivers: hv: vmbus: Suspend/resume the synic for hibernation
Drivers: hv: vmbus: Break out synic enable and disable operations
HID: hv: Remove dependencies on PAGE_SIZE for ring buffer
Tools: hv: move to tools buildsystem
hv_balloon: Reorganize the probe function
hv_balloon: Use a static page for the balloon_up send buffer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more mount API conversions from Al Viro:
"Assorted conversions of options parsing to new API.
gfs2 is probably the most serious one here; the rest is trivial stuff.
Other things in what used to be #work.mount are going to wait for the
next cycle (and preferably go via git trees of the filesystems
involved)"
* 'work.mount3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
gfs2: Convert gfs2 to fs_context
vfs: Convert spufs to use the new mount API
vfs: Convert hypfs to use the new mount API
hypfs: Fix error number left in struct pointer member
vfs: Convert functionfs to use the new mount API
vfs: Convert bpf to use the new mount API
|
|
load different cp firmware according to the DID and RID
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It's apparently needed in some configurations.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some environments want to use a host tmpfs/ramdisk to back guest pmem.
While the data is not persisted relative to the host it *is* persisted
relative to guest crashes / reboots. The guest is free to use dax and
MAP_SYNC to keep filesystem metadata consistent with dax accesses
without requiring guest fsync(). The guest can also observe that the
region is volatile and skip cache flushing as global visibility is
enough to "persist" data relative to the host staying alive over guest
reset events.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Link: https://lore.kernel.org/r/20190924114327.14700-1-aneesh.kumar@linux.ibm.com
[djbw: reword the changelog]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Current implementation attempts to request keys from the keyring even when
security is not enabled. Change behavior so when security is disabled it
will skip key request.
Error messages seen when no keys are installed and libnvdimm is loaded:
request-key[4598]: Cannot find command to construct key 661489677
request-key[4606]: Cannot find command to construct key 34713726
Cc: stable@vger.kernel.org
Fixes: 4c6926a23b76 ("acpi/nfit, libnvdimm: Add unlock of nvdimm support for Intel DIMMs")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/156934642272.30222.5230162488753445916.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
We do check for a bad block during namespace init and that use
region bad block list. We need to initialize the bad block
for volatile regions for this to work. We also observe a lockdep
warning as below because the lock is not initialized correctly
since we skip bad block init for volatile regions.
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.3.0-rc1-15699-g3dee241c937e #149
Call Trace:
[c0000000f95cb250] [c00000000147dd84] dump_stack+0xe8/0x164 (unreliable)
[c0000000f95cb2a0] [c00000000022ccd8] register_lock_class+0x308/0xa60
[c0000000f95cb3a0] [c000000000229cc0] __lock_acquire+0x170/0x1ff0
[c0000000f95cb4c0] [c00000000022c740] lock_acquire+0x220/0x270
[c0000000f95cb580] [c000000000a93230] badblocks_check+0xc0/0x290
[c0000000f95cb5f0] [c000000000d97540] nd_pfn_validate+0x5c0/0x7f0
[c0000000f95cb6d0] [c000000000d98300] nd_dax_probe+0xd0/0x1f0
[c0000000f95cb760] [c000000000d9b66c] nd_pmem_probe+0x10c/0x160
[c0000000f95cb790] [c000000000d7f5ec] nvdimm_bus_probe+0x10c/0x240
[c0000000f95cb820] [c000000000d0f844] really_probe+0x254/0x4e0
[c0000000f95cb8b0] [c000000000d0fdfc] driver_probe_device+0x16c/0x1e0
[c0000000f95cb930] [c000000000d10238] device_driver_attach+0x68/0xa0
[c0000000f95cb970] [c000000000d1040c] __driver_attach+0x19c/0x1c0
[c0000000f95cb9f0] [c000000000d0c4c4] bus_for_each_dev+0x94/0x130
[c0000000f95cba50] [c000000000d0f014] driver_attach+0x34/0x50
[c0000000f95cba70] [c000000000d0e208] bus_add_driver+0x178/0x2f0
[c0000000f95cbb00] [c000000000d117c8] driver_register+0x108/0x170
[c0000000f95cbb70] [c000000000d7edb0] __nd_driver_register+0xe0/0x100
[c0000000f95cbbd0] [c000000001a6baa4] nd_pmem_driver_init+0x34/0x48
[c0000000f95cbbf0] [c0000000000106f4] do_one_initcall+0x1d4/0x4b0
[c0000000f95cbcd0] [c0000000019f499c] kernel_init_freeable+0x544/0x65c
[c0000000f95cbdb0] [c000000000010d6c] kernel_init+0x2c/0x180
[c0000000f95cbe20] [c00000000000b954] ret_from_kernel_thread+0x5c/0x68
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/20190919083355.26340-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
With PFN_MODE_PMEM namespace, the memmap area is allocated from the device
area. Some architectures map the memmap area with large page size. On
architectures like ppc64, 16MB page for memap mapping can map 262144 pfns.
This maps a namespace size of 16G.
When populating memmap region with 16MB page from the device area,
make sure the allocated space is not used to map resources outside this
namespace. Such usage of device area will prevent a namespace destroy.
Add resource end pnf in altmap and use that to check if the memmap area
allocation can map pfn outside the namespace. On ppc64 in such case we fallback
to allocation from memory.
This fix kernel crash reported below:
[ 132.034989] WARNING: CPU: 13 PID: 13719 at mm/memremap.c:133 devm_memremap_pages_release+0x2d8/0x2e0
[ 133.464754] BUG: Unable to handle kernel data access at 0xc00c00010b204000
[ 133.464760] Faulting instruction address: 0xc00000000007580c
[ 133.464766] Oops: Kernel access of bad area, sig: 11 [#1]
[ 133.464771] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
.....
[ 133.464901] NIP [c00000000007580c] vmemmap_free+0x2ac/0x3d0
[ 133.464906] LR [c0000000000757f8] vmemmap_free+0x298/0x3d0
[ 133.464910] Call Trace:
[ 133.464914] [c000007cbfd0f7b0] [c0000000000757f8] vmemmap_free+0x298/0x3d0 (unreliable)
[ 133.464921] [c000007cbfd0f8d0] [c000000000370a44] section_deactivate+0x1a4/0x240
[ 133.464928] [c000007cbfd0f980] [c000000000386270] __remove_pages+0x3a0/0x590
[ 133.464935] [c000007cbfd0fa50] [c000000000074158] arch_remove_memory+0x88/0x160
[ 133.464942] [c000007cbfd0fae0] [c0000000003be8c0] devm_memremap_pages_release+0x150/0x2e0
[ 133.464949] [c000007cbfd0fb70] [c000000000738ea0] devm_action_release+0x30/0x50
[ 133.464955] [c000007cbfd0fb90] [c00000000073a5a4] release_nodes+0x344/0x400
[ 133.464961] [c000007cbfd0fc40] [c00000000073378c] device_release_driver_internal+0x15c/0x250
[ 133.464968] [c000007cbfd0fc80] [c00000000072fd14] unbind_store+0x104/0x110
[ 133.464973] [c000007cbfd0fcd0] [c00000000072ee24] drv_attr_store+0x44/0x70
[ 133.464981] [c000007cbfd0fcf0] [c0000000004a32bc] sysfs_kf_write+0x6c/0xa0
[ 133.464987] [c000007cbfd0fd10] [c0000000004a1dfc] kernfs_fop_write+0x17c/0x250
[ 133.464993] [c000007cbfd0fd60] [c0000000003c348c] __vfs_write+0x3c/0x70
[ 133.464999] [c000007cbfd0fd80] [c0000000003c75d0] vfs_write+0xd0/0x250
djbw: Aneesh notes that this crash can likely be triggered in any kernel that
supports 'papr_scm', so flagging that commit for -stable consideration.
Fixes: b5beae5e224f ("powerpc/pseries: Add driver for PAPR SCM regions")
Cc: <stable@vger.kernel.org>
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Tested-by: Santosh Sivaraj <santosh@fossix.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Link: https://lore.kernel.org/r/20190910062826.10041-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
nd_label->dpa issue was observed when trying to enable the namespace created
with little-endian kernel on a big-endian kernel. That made me run
`sparse` on the rest of the code and other changes are the result of that.
Fixes: d9b83c756953 ("libnvdimm, btt: rework error clearing")
Fixes: 9dedc73a4658 ("libnvdimm/btt: Fix LBA masking during 'free list' population")
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/20190809074726.27815-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Allow arch to provide the supported alignments and use hugepage alignment only
if we support hugepage. Right now we depend on compile time configs whereas this
patch switch this to runtime discovery.
Architectures like ppc64 can have THP enabled in code, but then can have
hugepage size disabled by the hypervisor. This allows us to create dax devices
with PAGE_SIZE alignment in this case.
Existing dax namespace with alignment larger than PAGE_SIZE will fail to
initialize in this specific case. We still allow fsdax namespace initialization.
With respect to identifying whether to enable hugepage fault for a dax device,
if THP is enabled during compile, we default to taking hugepage fault and in dax
fault handler if we find the fault size > alignment we retry with PAGE_SIZE
fault size.
This also addresses the below failure scenario on ppc64
ndctl create-namespace --mode=devdax | grep align
"align":16777216,
"align":16777216
cat /sys/devices/ndbus0/region0/dax0.0/supported_alignments
65536 16777216
daxio.static-debug -z -o /dev/dax0.0
Bus error (core dumped)
$ dmesg | tail
lpar: Failed hash pte insert with error -4
hash-mmu: mm: Hashing failure ! EA=0x7fff17000000 access=0x8000000000000006 current=daxio
hash-mmu: trap=0x300 vsid=0x22cb7a3 ssize=1 base psize=2 psize 10 pte=0xc000000501002b86
daxio[3860]: bus error (7) at 7fff17000000 nip 7fff973c007c lr 7fff973bff34 code 2 in libpmem.so.1.0.0[7fff973b0000+20000]
daxio[3860]: code: 792945e4 7d494b78 e95f0098 7d494b78 f93f00a0 4800012c e93f0088 f93f0120
daxio[3860]: code: e93f00a0 f93f0128 e93f0120 e95f0128 <f9490000> e93f0088 39290008 f93f0110
The failure was due to guest kernel using wrong page size.
The namespaces created with 16M alignment will appear as below on a config with
16M page size disabled.
$ ndctl list -Ni
[
{
"dev":"namespace0.1",
"mode":"fsdax",
"map":"dev",
"size":5351931904,
"uuid":"fc6e9667-461a-4718-82b4-69b24570bddb",
"align":16777216,
"blockdev":"pmem0.1",
"supported_alignments":[
65536
]
},
{
"dev":"namespace0.0",
"mode":"fsdax", <==== devdax 16M alignment marked disabled.
"map":"mem",
"size":5368709120,
"uuid":"a4bdf81a-f2ee-4bc6-91db-7b87eddd0484",
"state":"disabled"
}
]
Cc: linux-mm@kvack.org
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/20190905154603.10349-8-aneesh.kumar@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Running old skge driver on PowerPC causes checksum errors
because hardware reported 1's complement checksum is in little-endian
byte order.
Reported-by: Benoit <benoit.sansoni@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
struct archdr is only big enough to hold the header of various types of
arcnet packets. So to provide enough space to hold the data read from
hardware provide a buffer large enough to hold a packet with maximal
size.
The problem was noticed by the stack protector which makes the kernel
oops.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The intention was to have the GEO_TX_POWER_LIMIT command in FW version
36 as well, but not all 8000 family got this feature enabled. The
8000 family is the only one using version 36, so skip this version
entirely. If we try to send this command to the firmwares that do not
support it, we get a BAD_COMMAND response from the firmware.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=204151.
Cc: stable@vger.kernel.org # 4.19+
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
mt7615 patch/n9/cr4 firmwares are available in mediatek folder in
linux-firmware repository. Because of this mt7615 won't work on regular
distributions like Ubuntu. Fix path definitions. Moreover remove useless
firmware name pointers and use definitions directly
Fixes: 04b8e65922f6 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets")
Cc: stable@vger.kernel.org
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
When creating a raw AF_ISDN socket, CAP_NET_RAW needs to be checked
first.
Signed-off-by: Ori Nimron <orinimron123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use proper helper for 32 bit.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To make sure the domain tlb flush completes before the
function returns, explicitly wait for its completion.
Signed-off-by: Filippo Sironi <sironi@amazon.de>
Fixes: 42a49f965a8d ("amd-iommu: flush domain tlb when attaching a new device")
[joro: Added commit message and fixes tag]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
In mlx5 parse_tunnel_attr() function dispatch on encap IP address type
is performed by directly checking flow_rule_match_key() on
FLOW_DISSECTOR_KEY_ENC_IPV4_ADDRS, and then on
FLOW_DISSECTOR_KEY_ENC_IPV6_ADDRS. However, since those are stored in
union, first check is always true if any type of encap address is set,
which leads to IPv6 tunnel encap address being parsed as IPv4 by mlx5.
Determine correct IP address type by checking control key first and if
it set, take address type from match.key->addr_type.
Fixes: d1bda7eecd88 ("net/mlx5e: Allow matching only enc_key_id/enc_dst_port for decapsulation action")
Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Before this patch, when adding multiple ethtool steering rules with
identical classification, the driver used to append the new destination
to the already existing hw rule, which caused the hw to forward the
traffic to all destinations (rx queues).
Here we avoid this by setting the "no append" mlx5 fs core flag when
adding a new ethtool rule.
Fixes: 6dc6071cfcde ("net/mlx5e: Add ethtool flow steering support")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Add the device ID of upcoming BlueField-2 integrated ConnectX-6 Dx
network controller. Its VFs will be using the generic VF device ID:
0x101e "ConnectX Family mlx5Gen Virtual Function".
Fixes: 2e9d3e83ab82 ("net/mlx5: Update the list of the PCI supported devices")
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
In case source_eswitch_owner_vhca_id is given as a match,
the source_vport (vhca_id) will be set in case vhca_id_valid.
This will allow matching on peer vports, vports that belong
to the other pf.
Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When we free an STE and the STE is in the middle of collision
list, the prev_ste was obtained incorrectly from the list.
To avoid such issues list_entry calls replaced with standard list API.
Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The vport number is part of the vport_cap, there is no reason
to store in a separate variable on the vport.
Fixes: 9db810ed2d37 ("net/mlx5: DR, Expose steering action functionality")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When replacing a large mapping created with page-mode 7 (i.e.
non-default page size), tear down the entire series of replicated PTEs.
Besides providing access to the old mapping, another thing that might go
wrong with this issue is on the fetch_pte() code path that can return a
PDE entry of the newly re-mapped range.
While at it, make sure that we flush the TLB in case alloc_pte() fails
and returns NULL at a lower level.
Fixes: 6d568ef9a622 ("iommu/amd: Allow downgrading page-sizes in alloc_pte()")
Signed-off-by: Andrei Dulea <adulea@amazon.de>
|
|
Given an arbitrary pte that is part of a large mapping, this function
returns the first pte of the series (and optionally the mapped size and
number of PTEs)
It will be re-used in a subsequent patch to replace an existing L7
mapping.
Fixes: 6d568ef9a622 ("iommu/amd: Allow downgrading page-sizes in alloc_pte()")
Signed-off-by: Andrei Dulea <adulea@amazon.de>
|
|
Downgrading an existing large mapping to a mapping using smaller
page-sizes works only for the mappings created with page-mode 7 (i.e.
non-default page size).
Treat large mappings created with page-mode 0 (i.e. default page size)
like a non-present mapping and allow to overwrite it in alloc_pte().
While around, make sure that we flush the TLB only if we change an
existing mapping, otherwise we might end up acting on garbage PTEs.
Fixes: 6d568ef9a622 ("iommu/amd: Allow downgrading page-sizes in alloc_pte()")
Signed-off-by: Andrei Dulea <adulea@amazon.de>
|
|
Take into account the gathered freelist in free_sub_pt(), otherwise we
end up leaking all that pages.
Fixes: 409afa44f9ba ("iommu/amd: Introduce free_sub_pt() function")
Signed-off-by: Andrei Dulea <adulea@amazon.de>
|
|
After firmware has been downloaded, driver should send
some information to it through H2C commands. Those H2C
commands are transmitted through TX path.
But before HCI has been started, the TX path is not
working completely. Such as PCI interfaces, the interrupts
are not enabled, hence TX interrupts will not be issued
after H2C skb has been DMAed to the device. And the H2C
skbs will not be released until the device is powered off.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Merrifield Basin Cove PMIC
New Device Support:
- Add support for Intel Tiger Lake to Intel LPSS PCI
- Add support for Intel Sky Lake to Intel LPSS PCI
- Add support for ST-Ericsson DB8520 to DB8500 PRCMU
New Functionality:
- Add RTC and PWRC support to MT6323
Fix-ups:
- Clean-up include files; davinci_voicecodec, asic3, sm501, mt6397
- Ignore return values from debugfs_create*(); ab3100-*, ab8500-debugfs, aat2870-core
- Device Tree changes; rn5t618, mt6397
- Use new I2C API; tps80031, 88pm860x-core, ab3100-core, bcm590xx,
da9150-core, max14577, max77693, max77843, max8907,
max8925-i2c, max8997, max8998, palmas, twl-core,
- Remove obsolete code; da9063, jz4740-adc
- Simplify semantics; timberdale, htc-i2cpld
- Add 'fall-through' tags; omap-usb-host, db8500-prcmu
- Remove superfluous prints; ab8500-debugfs, db8500-prcmu, fsl-imx25-tsadc,
intel_soc_pmic_bxtwc, qcom_rpm, sm501
- Trivial rename/whitespace/typo fixes; mt6397-core, MAINTAINERS
- Reorganise code structure; mt6397-*
- Improve code consistency; intel-lpss
- Use MODULE_SOFTDEP() helper; intel-lpss
- Use DEFINE_RES_*() helpers; mt6397-core
Bug Fixes:
- Clean-up resources; max77620
- Prevent input events being dropped on resume; intel-lpss-pci
- Prevent sleeping in IRQ context; ezx-pcap"
* tag 'mfd-next-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (48 commits)
mfd: mt6323: Add MT6323 RTC and PWRC
mfd: mt6323: Replace boilerplate resource code with DEFINE_RES_* macros
mfd: mt6397: Add mutex include
dt-bindings: mfd: mediatek: Add MT6323 Power Controller
dt-bindings: mfd: mediatek: Update RTC to include MT6323
dt-bindings: mfd: mediatek: mt6397: Change to relative paths
mfd: db8500-prcmu: Support the higher DB8520 ARMSS
mfd: intel-lpss: Use MODULE_SOFTDEP() instead of implicit request
mfd: htc-i2cpld: Drop check because i2c_unregister_device() is NULL safe
mfd: sm501: Include the GPIO driver header
mfd: intel-lpss: Add Intel Skylake ACPI IDs
mfd: intel-lpss: Consistently use GENMASK()
mfd: Add support for Merrifield Basin Cove PMIC
mfd: ezx-pcap: Replace mutex_lock with spin_lock
mfd: asic3: Include the right header
MAINTAINERS: altera-sysmgr: Fix typo in a filepath
mfd: mt6397: Extract IRQ related code from core driver
mfd: mt6397: Rename macros to something more readable
mfd: Remove dev_err() usage after platform_get_irq()
mfd: db8500-prcmu: Mark expected switch fall-throughs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Core Frameworks
- Obtain scale type through sysfs
New Functionality:
- Provide Device Tree functionality in rave-sp-backlight
- Calculate if scale type is (non-)linear in pwm_bl
Fix-ups:
- Simplify code in lm3630a_bl
- Trivial rename/whitespace/typo fixes in lms283gf05
- Remove superfluous NULL check in tosa_lcd
- Fix power state initialisation in gpio_backlight
- List supported file in MAINTAINERS
Bug Fixes:
- Kconfig - default to not building unless requested in
{LED,BACKLIGHT}_CLASS_DEVICE"
* tag 'backlight-next-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: pwm_bl: Set scale type for brightness curves specified in the DT
backlight: pwm_bl: Set scale type for CIE 1931 curves
backlight: Expose brightness curve type through sysfs
MAINTAINERS: Add entry for stable backlight sysfs ABI documentation
backlight: gpio-backlight: Correct initial power state handling
video: backlight: tosa_lcd: drop check because i2c_unregister_device() is NULL safe
video: backlight: Drop default m for {LCD,BACKLIGHT_CLASS_DEVICE}
backlight: lms283gf05: Fix a typo in the description passed to 'devm_gpio_request_one()'
backlight: lm3630a: Switch to use fwnode_property_count_uXX()
backlight: rave-sp: Leave initial state and register with correct device
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it
(Krzysztof Wilczynski)
- Fix incorrect PCIe device types and remove dev->has_secondary_link
to simplify code that deals with upstream/downstream ports (Mika
Westerberg)
- After suspend, restore Resizable BAR size bits correctly for 1MB
BARs (Sumit Saxena)
- Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra)
Virtualization:
- Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna
Labs (Ali Saidi)
- Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg)
- Remove group write permissions from sysfs sriov_numvfs,
sriov_drivers_autoprobe (Kelsey Skunberg)
Hotplug:
- Simplify pciehp indicator control (Denis Efremov)
Peer-to-peer DMA:
- Allow P2P DMA between root ports for whitelisted bridges (Logan
Gunthorpe)
- Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe)
- DMA map P2P DMA requests that traverse host bridge (Logan
Gunthorpe)
Amazon Annapurna Labs host bridge driver:
- Add DT binding and controller driver (Jonathan Chocron)
Hyper-V host bridge driver:
- Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui)
- Fix PCI domain number collisions (Haiyang Zhang)
- Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang)
- Fix build errors on non-SYSFS config (Randy Dunlap)
i.MX6 host bridge driver:
- Limit DBI register length (Stefan Agner)
Intel VMD host bridge driver:
- Fix config addressing issues (Jon Derrick)
Layerscape host bridge driver:
- Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao)
- Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately
(Xiaowei Bao)
Mediatek host bridge driver:
- Add MT7629 controller support (Jianjun Wang)
Mobiveil host bridge driver:
- Fix CPU base address setup (Hou Zhiqiang)
- Make "num-lanes" property optional (Hou Zhiqiang)
Tegra host bridge driver:
- Fix OF node reference leak (Nishka Dasgupta)
- Disable MSI for root ports to work around design problem (Vidya
Sagar)
- Add Tegra194 DT binding and controller support (Vidya Sagar)
- Add support for sideband pins and slot regulators (Vidya Sagar)
- Add PIPE2UPHY support (Vidya Sagar)
Misc:
- Remove unused pci_block_cfg_access() et al (Kelsey Skunberg)
- Unexport pci_bus_get(), etc (Kelsey Skunberg)
- Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in
the PCI core (Kelsey Skunberg)
- Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg)
- Mark expected switch fall-through (Gustavo A. R. Silva)
- Propagate errors for optional regulators and PHYs (Thierry Reding)
- Fix kernel command line resource_alignment parameter issues (Logan
Gunthorpe)"
* tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits)
PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI
arm64: tegra: Add PCIe slot supply information in p2972-0000 platform
arm64: tegra: Add configuration for PCIe C5 sideband signals
PCI: tegra: Add support to enable slot regulators
PCI: tegra: Add support to configure sideband pins
PCI: vmd: Fix shadow offsets to reflect spec changes
PCI: vmd: Fix config addressing when using bus offsets
PCI: dwc: Add validation that PCIe core is set to correct mode
PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver
dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding
PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port
PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port
PCI: Add ACS quirk for Amazon Annapurna Labs root ports
PCI: Add Amazon's Annapurna Labs vendor ID
MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer
PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers
dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries
dt-bindings: PCI: tegra: Add sideband pins configuration entries
PCI: tegra: Add Tegra194 PCIe support
PCI: Get rid of dev->has_secondary_link flag
...
|
|
|
|
When registering a thermal zone device, we currently return -EINVAL in
four cases. This makes it a little hard to debug the real cause of the
failure.
Print some error messages to make it easier for developer to figure out
what happened.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
thermal_zone_device_unregister() cancels the delayed work that polls the
thermal zone, but it does not wait for it to finish. This is racy with
respect to the freeing of the thermal zone device, which can result in a
use-after-free [1].
Fix this by waiting for the delayed work to finish before freeing the
thermal zone device. Note that thermal_zone_device_set_polling() is
never invoked from an atomic context, so it is safe to call
cancel_delayed_work_sync() that can block.
[1]
[ +0.002221] ==================================================================
[ +0.000064] BUG: KASAN: use-after-free in __mutex_lock+0x1076/0x11c0
[ +0.000016] Read of size 8 at addr ffff8881e48e0450 by task kworker/1:0/17
[ +0.000023] CPU: 1 PID: 17 Comm: kworker/1:0 Not tainted 5.2.0-rc6-custom-02495-g8e73ca3be4af #1701
[ +0.000010] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016
[ +0.000016] Workqueue: events_freezable_power_ thermal_zone_device_check
[ +0.000012] Call Trace:
[ +0.000021] dump_stack+0xa9/0x10e
[ +0.000020] print_address_description.cold.2+0x9/0x25e
[ +0.000018] __kasan_report.cold.3+0x78/0x9d
[ +0.000016] kasan_report+0xe/0x20
[ +0.000016] __mutex_lock+0x1076/0x11c0
[ +0.000014] step_wise_throttle+0x72/0x150
[ +0.000018] handle_thermal_trip+0x167/0x760
[ +0.000019] thermal_zone_device_update+0x19e/0x5f0
[ +0.000019] process_one_work+0x969/0x16f0
[ +0.000017] worker_thread+0x91/0xc40
[ +0.000014] kthread+0x33d/0x400
[ +0.000015] ret_from_fork+0x3a/0x50
[ +0.000020] Allocated by task 1:
[ +0.000015] save_stack+0x19/0x80
[ +0.000015] __kasan_kmalloc.constprop.4+0xc1/0xd0
[ +0.000014] kmem_cache_alloc_trace+0x152/0x320
[ +0.000015] thermal_zone_device_register+0x1b4/0x13a0
[ +0.000015] mlxsw_thermal_init+0xc92/0x23d0
[ +0.000014] __mlxsw_core_bus_device_register+0x659/0x11b0
[ +0.000013] mlxsw_core_bus_device_register+0x3d/0x90
[ +0.000013] mlxsw_pci_probe+0x355/0x4b0
[ +0.000014] local_pci_probe+0xc3/0x150
[ +0.000013] pci_device_probe+0x280/0x410
[ +0.000013] really_probe+0x26a/0xbb0
[ +0.000013] driver_probe_device+0x208/0x2e0
[ +0.000013] device_driver_attach+0xfe/0x140
[ +0.000013] __driver_attach+0x110/0x310
[ +0.000013] bus_for_each_dev+0x14b/0x1d0
[ +0.000013] driver_register+0x1c0/0x400
[ +0.000015] mlxsw_sp_module_init+0x5d/0xd3
[ +0.000014] do_one_initcall+0x239/0x4dd
[ +0.000013] kernel_init_freeable+0x42b/0x4e8
[ +0.000012] kernel_init+0x11/0x18b
[ +0.000013] ret_from_fork+0x3a/0x50
[ +0.000015] Freed by task 581:
[ +0.000013] save_stack+0x19/0x80
[ +0.000014] __kasan_slab_free+0x125/0x170
[ +0.000013] kfree+0xf3/0x310
[ +0.000013] thermal_release+0xc7/0xf0
[ +0.000014] device_release+0x77/0x200
[ +0.000014] kobject_put+0x1a8/0x4c0
[ +0.000014] device_unregister+0x38/0xc0
[ +0.000014] thermal_zone_device_unregister+0x54e/0x6a0
[ +0.000014] mlxsw_thermal_fini+0x184/0x35a
[ +0.000014] mlxsw_core_bus_device_unregister+0x10a/0x640
[ +0.000013] mlxsw_devlink_core_bus_device_reload+0x92/0x210
[ +0.000015] devlink_nl_cmd_reload+0x113/0x1f0
[ +0.000014] genl_family_rcv_msg+0x700/0xee0
[ +0.000013] genl_rcv_msg+0xca/0x170
[ +0.000013] netlink_rcv_skb+0x137/0x3a0
[ +0.000012] genl_rcv+0x29/0x40
[ +0.000013] netlink_unicast+0x49b/0x660
[ +0.000013] netlink_sendmsg+0x755/0xc90
[ +0.000013] __sys_sendto+0x3de/0x430
[ +0.000013] __x64_sys_sendto+0xe2/0x1b0
[ +0.000013] do_syscall_64+0xa4/0x4d0
[ +0.000013] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ +0.000017] The buggy address belongs to the object at ffff8881e48e0008
which belongs to the cache kmalloc-2k of size 2048
[ +0.000012] The buggy address is located 1096 bytes inside of
2048-byte region [ffff8881e48e0008, ffff8881e48e0808)
[ +0.000007] The buggy address belongs to the page:
[ +0.000012] page:ffffea0007923800 refcount:1 mapcount:0 mapping:ffff88823680d0c0 index:0x0 compound_mapcount: 0
[ +0.000020] flags: 0x200000000010200(slab|head)
[ +0.000019] raw: 0200000000010200 ffffea0007682008 ffffea00076ab808 ffff88823680d0c0
[ +0.000016] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000
[ +0.000007] page dumped because: kasan: bad access detected
[ +0.000012] Memory state around the buggy address:
[ +0.000012] ffff8881e48e0300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000012] ffff8881e48e0380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000012] >ffff8881e48e0400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000008] ^
[ +0.000012] ffff8881e48e0480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000012] ffff8881e48e0500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] ==================================================================
Fixes: b1569e99c795 ("ACPI: move thermal trip handling to generic thermal layer")
Reported-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Never directly free @dev after calling device_register(), even if it
returned an error! Always use put_device() to give up the reference
initialized. Clean up the rollback block also.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
When calling thermal_add_hwmon_sysfs(), the device type is sanitized by
replacing '-' with '_'. However tz->type remains unsanitized. Thus
calling thermal_hwmon_lookup_by_type() returns no device. And if there is
no device, thermal_remove_hwmon_sysfs() fails with "hwmon device lookup
failed!".
The result is unregisted hwmon devices in the sysfs.
Fixes: 409ef0bacacf ("thermal_hwmon: Sanitize attribute name passed to hwmon")
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Direct invocation of printk() is not preferred to emit logs.
This commit replaces printk(KERN_WARNING) with corresponding
pr_warn() function call.
Signed-off-by: Rishi Gupta <gupt21@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
