summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2015-10-09net/mlx4_core: Fix resource tracker error flow in add_res_rangeSaeed Mahameed
The 'for' loop when undoing rb-tree insertions and list-adds in the error flow in add_res_range had errors, fix them. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/mlx4_core: Fix mailbox leak in error flow when performing update qpJack Morgenstein
The procedure mlx4_update_qp leaks mailboxes in its error-flow, fix that. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/mlx4_en: Add steering rules after RSS creationIdo Shamay
Changed the receive control flow in a way that steering rules are added only when the RSS object is already in RTR/RTS mode. Some optimization features, which are enabled by the device firmware, require this condition in order to be effective. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/mlx5_core: Use private health thread for each deviceEli Cohen
Use a single threaded work queue for each device in the system instead of using one thread for any device. This is required so we can concurrently process system error handling for all the devices that need that. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/mlx5_core: Use accessor functions to read from device memoryEli Cohen
Use ioread function to read health buffer data. In addition, print the firmware version as a string for readability and also use dev_err to have the device string to be printed. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/mlx5_core: Prepare cmd interface to system errors handlingEli Cohen
In preparation to handling system errors at the mlx5_core level, change the interface of cmd_work_handler to accept a 64 bit argument for the vector. This allows to encode a flag that signifies when the handler is called as a result of a driver logic that wishes to terminate commands that the hardware may not be able to terminate. Such command completions are detected at the handler and proper return status is encoded. To be able to terminate page handler commands, we make sure to set the corresponding bit in the bitmask. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/mlx5_core: Improve mlx5 messagesEli Cohen
Improve the messages printed by the mlx5 macros to include the device string. In addition, prefix names used by the macros with two underscores to avoid possible name collisions. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08i40e: print neato new featuresJesse Brandeburg
To help users and developers know what compile options and hardware features are enabled at compile time, print VxLAN is available. Change-ID: I3162f3b7678dc725a597f964217920eb218b480b Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-08i40e/i40evf: pass QOS handle to VFMitch Williams
The VF really doesn't care about the QOS handle but it will in the future. Since the VF only uses TC0, send it that handle. On the VF side, save the handle and use it to populate the QOS params when we call into the client interface. Change-ID: I76f41b070baeaa09b19383e9168bc677837e0761 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-08i40evf: use capabilities flags properlyMitch Williams
Use the capabilities passed to us by the PF driver to control VF driver behavior. In the process, clean up the VLAN add/remove code so it's not a horrible morass of ifdefs. Change-ID: I1050eaf12b658a26fea6813047c9964163c70a73 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-08i40e: refactor code to remove indentJesse Brandeburg
I found a code indent that was avoidable because a whole function is inside an if block, reverse the if and move the code back a tab. Change-ID: I9989c8750ee61678fbf96a3b0fd7bf7cc7ef300a Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-08i40e/i40evf: clean up some codeJesse Brandeburg
Add missings spaces after declarations, remove another __func__ use, remove uncessary braces, remove unneeded breaks, and useless returns, and generally fix up some code. Change-ID: Ie715d6b64976c50e1c21531685fe0a2bd38c4244 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-08i40evf: detect reset more reliablyMitch Williams
Using VFGEN_RSTAT to detect a VF reset is an endeavor that is fraught with peril. It's entirely too easy to miss a reset because none of the bits are sticky. By the time the VF driver reads the register, the reset may have been processed and cleaned up by the PF driver, leaving the register in the same state that it was before the reset. Instead, detect a reset with the VF_ARQLEN register. When the VF is reset, the enable bit in this register is cleared, and it stays cleared until the VF driver processes the reset and re-enables the admin queue. Because we now deal with multiple registers in the reset and watchdog tasks, rename the rstat_val variable to reg_val. Change-ID: Id1df17045c0992e607da0162d31807f7fc20d199 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-08i40e: Support FW CEE DCB UP to TC map nibble swapGreg Bowers
Changes parsing of AQ command Get CEE DCBX OPER CFG (0x0A07). Change is required because FW creates the oper_prio_tc nibbles reversed from those in the CEE Priority Group sub-TLV. Change-ID: I7d9d8641bb430d30e286fc3fac909866ef8a0de8 Signed-off-by: Greg Bowers <gregory.j.bowers@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-08i40e/i40evf: Explicitly assign enum index for VSI typeSerey Kong
Ran into an issue where PF's VSI type list was different from VF's, which was resulted in different enum index. The VSI type list can be different depending on what build flag is used for PF and VF. The change is to explicitly assign enum index for each VSI type so that PF and VF always reference to the same VSI type event if the enum lists are different. Change-ID: I8c0e5fdb515f324f7964df863a458073cf467e57 Signed-off-by: Serey Kong <serey.kong@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-08i40e: add switch for link pollingShannon Nelson
There's been some need for controlling the periodic link polling for debugging link issues. This patch enables switching it off and on through an ethtool private flag. The link poll remains on by default, but can be turned off with ethtool --set-priv-flags p261p1 LinkPolling off and later turned back on with ethtool --set-priv-flags p261p1 LinkPolling on To check the current status, use ethtool --show-priv-flags p261p1 Change-ID: I32e4ab654ff3eec90a06cf144899971b82d71c40 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-08i40e: Fix multiple link up messagesMatt Jared
This patch addresses an issue where multiple link up messages can be logged resulting from aq link status timing when link properties are changed (fc, speed, etc.); solved by using a single function to handle status printing and adding a mechanism to track whether link state (up or down) has actually changed. Change-ID: Ied6ed6e49dc397c77d992adc0bc9ed3767152b9d Signed-off-by: Matt Jared <matthew.a.jared@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-08i40e: Fix for extra Flow Director filter in table after errorCarolyn Wyborny
This patch fixes a problem where the PF's fdir filter table would have an entry that the hw was unable to add. This notification happens in the hot path, so instead of trying to fix it then, we note the location in the failure case and delete it during regular fdir subtask callback. Without this patch, a case can occur where an invalid entry gets replayed and a valid one is not. Change-ID: I67831c183b5d0309876de807cc434809b74c9cb7 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-08i40e/i40evf: Store CEE DCBX DesiredCfg and RemoteCfgNeerav Parikh
This patch adds capability to query and store the CEE DCBX DesiredCfg and RemoteCfg data from the LLDP MIB. Added new member "desired_dcbx_config" in the i40e_hw data structure to hold CEE only DesiredCfg data. Change-ID: I19c550369594384eaff4cc63e690ca740231195d Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-08i40e: Add parsing for CEE DCBX TLVsNeerav Parikh
This patch adds parsing for CEE DCBX TLVs from the LLDP MIB. While the driver gets the DCB CEE operational configuration from Firmware using the "Get CEE DCBX Oper Config" AQ command there is a need to get the CEE DesiredCfg Tx by firmware and DCB configuration Rx from peer; for debug and other application purposes. Change-ID: I9140edf1a25a2852c7eff805d81e5eff6266178d Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-08i40e: add more verbose error messagesMitch Williams
Under certain circumstances, the device may not have enough resources to enable all of the VFs that it advertises in config space. Although the number of supported VFs is reported upon driver init, it is not obvious when this is different from the number reported in config space. To eliminate this confusion, add an error message explaining the problem. Additionally, move the 'Allocating VFs' message down below the error checks so as to prevent further confusion. Change-ID: I45b7efca53a7aebf7777be33a8bc9d615ae48ea1 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-08i40e: inline interrupt enableJesse Brandeburg
The interrupt enable function can be inlined by moving it to the header file, which decreases the function call overhead for a frequently called function. Change-ID: I3214cc99593725768642680e7b8ce7e9bba7e44d Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-08i40e: fix erroneous WARN_ONJesse Brandeburg
The driver was issuing a WARN_ON during ring size changes because the code was cloning the rx_ring struct but not zeroing out the pointers before allocating new memory. Zero out the pointers in the cloned copy before allocating new memory for them. In this case the code was correctly avoiding memory leaks but still triggering the warning. Change-ID: I186dd493948e9b7254ab0593d4aad8b68808918d Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-08net: hns: fix 32-bit build warningArnd Bergmann
The recently added hns driver causes a build warning in ARM allmodconfig builds: drivers/net/ethernet/hisilicon/hns/hnae.c: In function 'handles_show': drivers/net/ethernet/hisilicon/hns/hnae.c:452:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] j, (u64)h->qs[i]->io_base); ^ This removes the pointless cast and prints the pointer address using the "%p" format string in all three locations. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08net: Microchip encx24j600 driverJon Ringle
This ethernet driver supports the Micorchip enc424j600/626j600 Ethernet controller over a SPI bus interface. This driver makes use of the regmap API to optimize access to registers by caching registers where possible. Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/39935b.pdf Signed-off-by: Jon Ringle <jringle@gridpoint.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08net: phy: bcm7xxx: Modified to use global core register definesArun Parameswaran
Modified the bcm7xxx phy driver to remove local core register defines and use the common ones from "include/linux/brcmphy.h" Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08net: phy: Broadcom Cygnus internal Etherent PHY driverArun Parameswaran
Add support for the Broadcom Cygnus SoCs internal PHY's. The PHYs are 1000M/100M/10M capable with support for 'EEE' and 'APD' (Auto Power Down). This driver supports the following Broadcom Cygnus SoCs: - BCM583XX (BCM58300, BCM58302, BCM58303, BCM58305) - BCM113XX (BCM11300, BCM11320, BCM11350, BCM11360) The PHY's on these SoC's require some workarounds for stable operation, both during configuration time and during suspend/resume. This driver handles the application of the workarounds. Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08net: phy: Add Broadcom phy library for common interfacesArun Parameswaran
This patch adds the Broadcom phy library to consolidate common interfaces shared by Broadcom phy's. Moved the common interfaces to the 'bcm-phy-lib.c' and updated the Broadcom PHY drivers to use the new APIs. Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08net: phy: Broadcom iProc MDIO bus driverArun Parameswaran
This patch adds support for the Broadcom iProc MDIO bus interface. The MDIO interface can be found in the Broadcom iProc family Soc's. The MDIO bus is accessed using a combination of command and data registers. This MDIO driver provides access to the Etherent GPHY's connected to the MDIO bus. Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08dst: Pass net into dst->outputEric W. Biederman
The network namespace is already passed into dst_output pass it into dst->output lwt->output and friends. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08ipv4, ipv6: Pass net into ip_local_out and ip6_local_outEric W. Biederman
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08ipv4, ipv6: Pass net into __ip_local_out and __ip6_local_outEric W. Biederman
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08ipvlan: Cache net in ipvlan_process_v4_outbound and ipvlan_process_v6_outboundEric W. Biederman
Compute net once in ipvlan_process_v4_outbound and ipvlan_process_v6_outbound and store it in a variable so that net does not need to be recomputed next time it is used. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08ppp: Cache net in pptp_xmitEric W. Biederman
Compute net and store it in a variable in pptp_xmit, so that the value can be reused the next time it is needed. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08ipv6: Merge ip6_local_out and ip6_local_out_skEric W. Biederman
Stop hidding the sk parameter with an inline helper function and make all of the callers pass it, so that it is clear what the function is doing. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08ipv4: Merge ip_local_out and ip_local_out_skEric W. Biederman
It is confusing and silly hiding a parameter so modify all of the callers to pass in the appropriate socket or skb->sk if no socket is known. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08dst: Pass a sk into .local_outEric W. Biederman
For consistency with the other similar methods in the kernel pass a struct sock into the dst_ops .local_out method. Simplifying the socket passing case is needed a prequel to passing a struct net reference into .local_out. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-10-07 This series contains updates to i40e and i40evf only. Paul updates i40e to simply increase the amount of time we wait for a reset to complete since we have seen in some rare occasions the reset can take longer to complete. Shannon updates the driver to turn on Wake-on-LAN by default if it is enabled in the hardware config to begin with, rather than always disable it and wait for the user to expressly turn it on. Added new device id's and support for future devices. Fixed a possible type compare problem between a size and possible negative number. Also fixed a shift value that was wrong, which ended up with a bad bitmask. Did general house cleaning of the driver to cleanup several low lying fruit in the driver. Fixed an issue where new unicast address's would be added to the VSI list and then immediately removed and would never actually make it down to the hardware. Resolved the issue by removing the separation from unicast and multicast in the search for filters to be deleted. Mitch fixes an issue where the hardware would continue to access the memory formerly used by the rings for a VF which have been removed, causing memory corruption or DMAR errors. To relieve this condition, explicitly stop all rings associated with each VF before releasing its resources. Also fixed a panic if the driver is unable to enable MSI-X or its unable to acquire enough vectors, so propagate interrupt allocation failure information to the calling function. Cleaned up opcode that is not required. Carolyn extends the size of the test available for the interrupt names so that all the descriptive data available for the Flow Director interrupts is not truncated. Catherine fixes an issue where there was a possibility of speed getting set to 0 if advertised is set to 0 (which is the case when autoneg is disabled). Jesse fixes the checksum on big endian machines, so added code to swap it correctly. Also fixed a bug in the return from get_link_status() where only true or false was being returned, but false could mean multiple things. So allow the caller to get all the return values in the call chain bubbled back to the source so that the reason for the failure does not get lost. Anjali adds statistics to keep track of how many times we ask the stack to linearize the SKB because the hardware cannot handle SKBs with more than 8 frags per segment/single packet. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08Merge tag 'regmap-offload-update-bits' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap regmap: Allow buses to provide a custom update_bits() operation Some buses provide a native _update_bits() operation which for uncached registers is faster than doing a read/modify/write cycle as it is a single bus transaction. Add support for implementing this to regmap.
2015-10-07i40e/i40evf: remove unused opcodeMitch Williams
This opcode is not required. VFs that program RSS through the firmware do it by interacting directly with the firmware, and do not need to use the virtual channel for this functionality. Change-ID: Iaf17d2600e28ff1b6be8653f2fe9df1facd23b0e Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40evf: propagate interrupt allocation failureMitch Williams
Lower level functions are properly reporting errors, and higher-level functions are correctly responding to errors, but the errors aren't actually getting through. Typically, the middle-manager function seems to want to shield its boss from any bad news. This change fixes a panic if the driver is unable to enable MSI-X or is unable to acquire enough vectors. Change-ID: Ifd5787ce92519a5d97e4b465902db930d97b71a1 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e: Additional checks for CEE APP priority validityNeerav Parikh
The firmware has added additional status information to allow software to determine if the APP priority for FCoE/iSCSI/FIP is valid or not in CEE DCBX mode. This patch adds to support those additional checks and will only add applications to the software table that have oper and sync bits set without any error. Change-ID: I0a76c52427dadf97d4dba4538a3068d05e4eb56b Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e/i40evf: Add a stat to keep track of linearization countAnjali Singhai Jain
Keep track of how many times we ask the stack to linearize the skb because the HW cannot handle skbs with more than 8 frags per segment/single packet. Change-ID: If455452060963a769bbe6112cba952e79e944b52 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e/i40evf: fix unicast mac address addShannon Nelson
When using something like "ip maddr add ..." to add another unicast mac address to the netdev, the mac address comes into the set_rx_mode handler in the multicast list whether it is a unicast or multicast address. This was confusing the code when it was trying to search for addresses that needed to be deleted from the VSI, because it was looking for the VSI unicast address in the netdev unicast list. The result was that a new unicast address would get added to the VSI list and then immediately removed, and would never actually make it down into the hardware. This patch removes the separation from unicast and multicast in the search for filters to be deleted. It also simplifies the logic a little with a jump to the bottom of the loop when an address is found. Now it doesn't matter which netdev list the address is hiding in, we'll check them all. Change-ID: Ie3685a92427ae7d2212bf948919ce295bc7a874c Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e: fix bug in return from get_link_status and avoid spurious link messagesJesse Brandeburg
Previously, the driver could call this function and have only true/false returned, but false could mean multiple things like failure to read or link was down. This change allows the caller to get all return values in the call chain bubbled back to the source, which keeps information about failures from being lost. Also, in some unlikely scenarios, the firmware can become slow to respond to admin queue (AQ) queries for link state. Should the AQ time out, the driver can detect the state and avoid a link change when there may have been none. Change-ID: Ib2ac38407b7880750fb891b392fa77457fe6c21c Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e: add little endian conversion for checksumJesse Brandeburg
The checksum is not correct on big endian machines so add code to swap it correctly. Change-ID: Ic92b886d172a2cbe49f5d7eee1bc78e447023c7b Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e/i40evf: give up the __func__Shannon Nelson
During early development, we added the function name to all of the error strings to make debugging simpler. Now that we've released the driver, our users should have more comprehensible error messages. So tear the roof off and give up the __func__. Ow. Change-ID: I7e1766252c7a032b9af6520da6aff536bdfd533c Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e: Never let speed get set to 0 in get_settingsCatherine Sullivan
In ethtool, there is a possibility of speed getting set to 0 if advertise is set to 0 (which it is when autoneg is disabled). We never want this to happen as the firmware will actually attempt to set the speed to 0 sending link down, so add an extra check to make sure this doesn't happen. Change-ID: I62e0eeee2cbf043d8e6f5c9c9f0b92794e877f01 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e: Fix for truncated interrupt nameCarolyn Wyborny
This patch extends the size of the text available for the interrupt names. Without this patch, all the descriptive data available for the Flow Director interrupts is truncated. Change-ID: I2ac458f23ac3b4ea8f1edf73edc283b1d3704c7f Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e/i40evf: assure clean asq status reportShannon Nelson
There was a possibility where the asq_last_status could get through without update and thus report a previous error. I don't think we've actually seen this happen, but this patch will help make sure it doesn't. Change-ID: I9e33927052a5ee6ea21f80b66d4c4b76c2760b17 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Christopher Pau <christopher.pau@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-21 14:57:14 +0000