summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-03-13usb: host: xhci: add platform driver supportSebastian Andrzej Siewior
This adds a fairly simple xhci-platform driver support. Currently it is used by the dwc3 driver for supporting host mode. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-03-13xHCI: update sg tablesizeAndiry Xu
Update sg tablesize as we can expand the ring now. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13xHCI: check enqueue pointer advance into dequeue segAndiry Xu
When a urb is submitted to xHCI driver, check if queueing the urb will make the enqueue pointer advance into dequeue seg and expand the ring if it occurs. This is to guarantee the safety of ring expansion. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13xHCI: Allocate 2 segments for transfer ringAndiry Xu
Allocate 2 segments for transfer ring by default, so we can expand the ring when the enqueue pointer and dequeue pointer are in different segments. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13xHCI: dynamic ring expansionAndiry Xu
If room_on_ring() check fails, try to expand the ring and check again. When expand a ring, use a cached ring or allocate new segments, link the original ring and the new ring or segments, update the original ring's segment numbers and the last segment pointer. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13xHCI: set cycle state when allocate ringsAndiry Xu
In the past all the rings were allocated with cycle state equal to 1. Now the driver may expand an existing ring, and the new segments shall be allocated with the same cycle state as the old one. This affects ring allocation and cached ring re-initialization. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13xHCI: factor out segments allocation and free functionAndiry Xu
Factor out the segments allocation and free part from ring allocation and free routines since driver may call them directly when try to expand a ring. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13xHCI: count free TRBs on transfer ringAndiry Xu
In the past, the room_on_ring() check was implemented by walking all over the ring, which is wasteful and complicated. Count the number of free TRBs instead. The free TRBs number should be updated when enqueue/dequeue pointer is updated, or upon the completion of a set dequeue pointer command. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13xHCI: store ring's last segment and segment numbersAndiry Xu
Store the ring's last segment pointer and number of segments for ring expansion usage. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-12xHCI: store ring's typeAndiry Xu
When allocate a ring, store its type - four transfer types for endpoint, TYPE_STREAM for stream transfer, and TYPE_COMMAND/TYPE_EVENT for xHCI host. This helps to get rid of three bool function parameters: link_trbs, isoc and consumer. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-12usb: host: xhci: use __ffs() instead of hardcoding shiftFelipe Balbi
__ffs() can tell us which is the SEGMENT_SHIFT value to be used. This will prevent problems when users are too fast and don't pay attention to the need of fixing the Shift after changing TRBS_PER_SEGMENT. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-03-12xHCI: BESL calculation based on USB2.0 LPM errataAndiry Xu
The latest released errata for USB2.0 ECN LPM adds new fields to USB2.0 extension descriptor, defines two BESL values for device: baseline BESL and deep BESL. Baseline BESL value communicates a nominal power savings design point and the deep BESL value communicates a significant power savings design point. If device indicates BESL value, driver will use a value count in both host BESL and device BESL. Use baseline BESL value as default. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Tested-by: Jason Fan <jcfan@qca.qualcomm.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-03-12Merge 3.3-rc7 into usb-nextGreg Kroah-Hartman
This resolves the conflict with drivers/usb/host/ehci-fsl.h that happened with changes in Linus's and this branch at the same time. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09net: qmi_wwan: add Gobi and Pantech UML290 device IDsBjørn Mork
Adding the Pantech UML290 and all non-QDL Gobi device IDs from the qcserial driver now that we have support for shared net/QMI USB interfaces. Most of these are not yet tested with this driver, but should be mostly identical to tested devices, except for device IDs. Gobi devices provide several different interfaces (serial/net/other) using the exact same class, subclass and protocol values. This driver will only support the net/QMI function while there are other drivers supporting other device functions. The net/QMI interface number may also differ from device to device. It has been noted that all the other interfaces have additional functional descriptors, so we use that to detect the interface supported by this driver. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09net: qmi_wwan: support devices having a shared QMI/wwan interfaceBjørn Mork
Use the new cdc-wdm subdriver interface to create a device management device even for USB devices having a single combined QMI/wwan USB interface with three endpoints (int, bulk in, bulk out) instead of separate data and control interfaces. Some Huawei devices can be switched to a single interface mode for use with other operating systems than Linux. This adds support for these devices when they run in such non-Linux modes. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devicesBjørn Mork
Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09USB: ftdi_sio: new PID: Distortec JTAG-lock-pickMichał Wróbel
Signed-off-by: Michał Wróbel <michal.wrobel@flytronic.pl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09Merge tag 'iommu-fixes-v3.3-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull two IOMMU fixes from Joerg Roedel: "The first is an additional fix for the OMAP initialization order issue and the second patch fixes a possible section mismatch which can lead to a kernel crash in the AMD IOMMU driver when suspend/resume is used and the compiler has not inlined the iommu_set_device_table function." * tag 'iommu-fixes-v3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: x86/amd: iommu_set_device_table() must not be __init ARM: OMAP: fix iommu, not mailbox
2012-03-09Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull radeon drm stuff from Dave Airlie: "Just some radeon fixes, one is for an oops where we run out of ioremap space on some big hardware systems in 32-bit mode, stuff doesn't work properly but at least the machine will boot. One regression fix, and two bugs, one hw, one blit code." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms: fix hdmi duallink checks drm/radeon/kms: set SX_MISC in the r6xx blit code (v2) drm/radeon: deal with errors from framebuffer init path. drm/radeon: fix a semaphore deadlock on pre cayman asics
2012-03-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking from David Miller: 1) IPV4 routing metrics can become stale when routes are changed by the administrator, fix from Steffen Klassert. 2) atl1c does "val |= XXX;" where XXX is a bit number not a bit mask, fix by using set_bit. From Dan Carpenter. 3) Memory accounting bug in carl9170 driver results in wedged TX queue. Fix from Nicolas Cavallari. 4) iwlwifi accidently uses "sizeof(ptr)" instead of "sizeof(*ptr)", fix from Johannes Berg. 5) Openvswitch doesn't honor dp_ifindex when doing vport lookups, fix from Ben Pfaff. 6) ehea conversion to 64-bit stats lost multicast and rx_errors accounting, fix from Eric Dumazet. 7) Bridge state transition logging in br_stp_disable_port() is busted, it's emitted at the wrong time and the message is in the wrong tense, fix from Paulius Zaleckas. 8) mlx4 device erroneously invokes the queue resize firmware operation twice, fix from Jack Morgenstein. 9) Fix deadlock in usbnet, need to drop lock when invoking usb_unlink_urb() otherwise we recurse into taking it again. Fix from Sebastian Siewior. 10) hyperv network driver uses the wrong driver name string, fix from Haiyang Zhang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net/hyperv: Use the built-in macro KBUILD_MODNAME for this driver net/usbnet: avoid recursive locking in usbnet_stop() route: Remove redirect_genid inetpeer: Invalidate the inetpeer tree along with the routing cache mlx4_core: fix bug in modify_cq wrapper for resize flow. atl1c: set ATL1C_WORK_EVENT_RESET bit correctly bridge: fix state reporting when port is disabled bridge: br_log_state() s/entering/entered/ ehea: restore multicast and rx_errors fields openvswitch: Fix checksum update for actions on UDP packets. openvswitch: Honor dp_ifindex, when specified, for vport lookup by name. iwlwifi: fix wowlan suspend mwifiex: reset encryption mode flag before association carl9170: fix frame delivery if sta is in powersave mode carl9170: Fix memory accounting when sta is in power-save mode.
2012-03-08Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fix from Mark Brown: "Another small, clear fix in a specific driver." * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: tps65910: Configure correct value for VDDCTRL vout reg
2012-03-08Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Pull minor devicetree bug fixes and documentation updates from Grant Likely: "Fixes up a duplicate #include, adds an empty implementation of of_find_compatible_node() and make git ignore .dtb files. And fix up bus name on OF described PHYs. Nothing exciting here." * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6: doc: dt: Fix broken reference in gpio-leds documentation of/mdio: fix fixed link bus name of/fdt.c: asm/setup.h included twice of: add picochip vendor prefix dt: add empty of_find_compatible_node function ARM: devicetree: Add .dtb files to arch/arm/boot/.gitignore
2012-03-08Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Pull SPI section mismatch bug fix for v3.3-rc3 from Grant Likely: "Minor fix for pl022_dma_probe() function which was put in the wrong section." * tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6: Fix section mismatch in spi-pl022.c
2012-03-08Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull four hwmon patches from Guenter Roeck * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804 hwmon: (zl6100) Maintain delay parameter in driver instance data hwmon: (pmbus_core) Fix maximum number of POUT alarm attributes hwmon: (jc42) Add support for ST Microelectronics STTS2002 and STTS3000
2012-03-08Merge tag 'dm-3.3-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull device-mapper fixes for 3.3 from Alasdair Kergon Eight small device-mapper bug fixes. * tag 'dm-3.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm raid: fix flush support dm raid: set MD_CHANGE_DEVS when rebuilding dm thin metadata: decrement counter after removing mapped block dm thin metadata: unlock superblock in init_pmd error path dm thin metadata: remove incorrect close_device on creation error paths dm flakey: fix crash on read when corrupt_bio_byte not set dm io: fix discard support dm ioctl: do not leak argv if target message only contains whitespace
2012-03-08USB: serial: metro-usb: move to use dev_dbg() instead of dbg()Greg Kroah-Hartman
This properly ties the driver into the dynamic debug system and provides the needed device identification when the messages are printed out. It also removes a ton of checkpatch warnings as well, which is always a nice validation that it's the correct thing to do. Cc: Aleksey Babahin <tamerlan311@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: serial: metro-usb: remove unneeded cast and function callGreg Kroah-Hartman
We should use kzalloc() instead of kmalloc() and memset(), and remove an unneeded void * cast as well. Cc: Aleksey Babahin <tamerlan311@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: serial: metro-usb: remove function header commentsGreg Kroah-Hartman
They aren't needed, make the checkpatch tool unhappy, and in some places, aren't even correct. So just remove them, they get in the way and are messy. Cc: Aleksey Babahin <tamerlan311@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: serial: metro-usb: remove function prototypesGreg Kroah-Hartman
By rearranging the functions a bit, we can remove all function prototypes. Note, this also deleted the _close function, as it wasn't needed, it was doing the same thing the cleanup function did, so just call that instead. Cc: Aleksey Babahin <tamerlan311@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08net/hyperv: Use the built-in macro KBUILD_MODNAME for this driverHaiyang Zhang
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: Olaf Hering <olaf@aepfle.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08USB: serial: metro-usb: fix up coding style errorsGreg Kroah-Hartman
This fixes up all of the coding style errors, and removes the initial, unneeded comments on how to load the module and the old changelog which are no longer needed. There are still a number of coding style warnings left, I'll get to them later. Cc: Aleksey Babahin <tamerlan311@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: serial: metro-usb: remove the .h fileGreg Kroah-Hartman
A driver doesn't need a .h file just for simple things like vendor ids and a private structure. So move it into the .c file instead, saving some overall lines. Cc: Aleksey Babahin <tamerlan311@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: serial: metro-usb: convert to use module_usb_serial_driverGreg Kroah-Hartman
Now that we aren't doing anything special in the init function, move to use the easier module_usb_serial_driver() call instead, saving a lot of lines of unnecessary code. Cc: Aleksey Babahin <tamerlan311@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: serial: metro-usb: remove vendor and product module parametersGreg Kroah-Hartman
All new usb serial drivers should be using the dynamic id function, not having module parameters for this type of thing. So remove them before anyone gets used to them being there. Cc: Aleksey Babahin <tamerlan311@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: serial: metro-usb: add to the buildGreg Kroah-Hartman
This adds the metro-usb driver to the build system properly. Cc: Aleksey Babahin <tamerlan311@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: serial: metro-usb: fix up usb_serial_register callsGreg Kroah-Hartman
The usb serial core has changed how the driver is to be registered and unregistered recently. Make these changes to the driver so that it will properly build and work. Cc: Aleksey Babahin <tamerlan311@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: serial: add metro-usb driver to the treeAleksey Babahin
This driver is for the Metrologic barcode scanner. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: gadget: Make g_hid device class conform to spec.Orjan Friberg
HID devices should specify this in their interface descriptors, not in the device descriptor. This fixes a "missing hardware id" bug under Windows 7 with a VIA VL800 (3.0) controller. Signed-off-by: Orjan Friberg <of@flatfrog.com> Cc: Felipe Balbi <balbi@ti.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08usb: cdc-wdm: adding usb_cdc_wdm_register subdriver supportBjørn Mork
This driver can be used as a subdriver of another USB driver, allowing it to export a Device Managment interface consisting of a single interrupt endpoint with no dedicated USB interface. Some devices provide a Device Management function combined with a wwan function in a single USB interface having three endpoints (bulk in/out + interrupt). If the interrupt endpoint is used exclusively for DM notifications, then this driver can support that as a subdriver provided that the wwan driver calls the appropriate entry points on probe, suspend, resume, pre_reset, post_reset and disconnect. The main driver must have full control over all interface related settings, including the needs_remote_wakeup flag. A manage_power function must be provided by the main driver. A manage_power stub doing direct flag manipulation is used in normal driver mode. Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08usb: cdc-wdm: adding list lookup indirectionBjørn Mork
Register all interfaces handled by this driver in a list, getting rid of the dependency on usb_set_intfdata. This allows further generalization and simplification of the probe/create functions. This is needed to decouple wdm_open from the driver owning the interface, and it also allows us to share all the code in wdm_create with drivers unable to do usb_set_intfdata. Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08usb: cdc-wdm: split out reusable parts of probeBjørn Mork
Preparing for the addition of subdriver registering as an alternative to probe for interface-less usage. This should not change anything apart from minor code reordering. Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: Microchip VID mislabeled as Hornby VID in ftdi_sio.Bruno Thomsen
Microchip VID (0x04d8) was mislabeled as Hornby VID according to USB-IDs. A Full Speed USB Demo Board PID (0x000a) was mislabeled as Hornby Elite (an Digital Command Controller Console for model railways). Most likely the Hornby based their design on PIC18F87J50 Full Speed USB Demo Board. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: ehci-s5p: add DMA burst supportJingoo Han
DMA burst support is added to improve performance in EHCI data transfer. The USB EHCI controller on Exynos SoCs can use INCR16, INCR8, and INCR4 mode. These modes of INSNREG00 register should be set in order to enable DMA burst transfer. This feature is also related to AHB spec. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Sangwook Lee <sangwook.lee@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08x86/amd: iommu_set_device_table() must not be __initJan Beulich
This function is called from enable_iommus(), which in turn is used from amd_iommu_resume(). Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-03-08drm/radeon/kms: fix hdmi duallink checksAlex Deucher
All pre-SI chips are limited to 165 Mhz for single link. Code in question will be re-enabled when SI support is added. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=44755 https://bugzilla.kernel.org/show_bug.cgi?id=42887 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-08drm/radeon/kms: set SX_MISC in the r6xx blit code (v2)Marek Olšák
Mesa may set it to 1, causing all primitives to be killed. v2: also update the r7xx code Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-08net/usbnet: avoid recursive locking in usbnet_stop()Sebastian Siewior
|kernel BUG at kernel/rtmutex.c:724! |[<c029599c>] (rt_spin_lock_slowlock+0x108/0x2bc) from [<c01c2330>] (defer_bh+0x1c/0xb4) |[<c01c2330>] (defer_bh+0x1c/0xb4) from [<c01c3afc>] (rx_complete+0x14c/0x194) |[<c01c3afc>] (rx_complete+0x14c/0x194) from [<c01cac88>] (usb_hcd_giveback_urb+0xa0/0xf0) |[<c01cac88>] (usb_hcd_giveback_urb+0xa0/0xf0) from [<c01e1ff4>] (musb_giveback+0x34/0x40) |[<c01e1ff4>] (musb_giveback+0x34/0x40) from [<c01e2b1c>] (musb_advance_schedule+0xb4/0x1c0) |[<c01e2b1c>] (musb_advance_schedule+0xb4/0x1c0) from [<c01e2ca8>] (musb_cleanup_urb.isra.9+0x80/0x8c) |[<c01e2ca8>] (musb_cleanup_urb.isra.9+0x80/0x8c) from [<c01e2ed0>] (musb_urb_dequeue+0xec/0x108) |[<c01e2ed0>] (musb_urb_dequeue+0xec/0x108) from [<c01cbb90>] (unlink1+0xbc/0xcc) |[<c01cbb90>] (unlink1+0xbc/0xcc) from [<c01cc2ec>] (usb_hcd_unlink_urb+0x54/0xa8) |[<c01cc2ec>] (usb_hcd_unlink_urb+0x54/0xa8) from [<c01c2a84>] (unlink_urbs.isra.17+0x2c/0x58) |[<c01c2a84>] (unlink_urbs.isra.17+0x2c/0x58) from [<c01c2b44>] (usbnet_terminate_urbs+0x94/0x10c) |[<c01c2b44>] (usbnet_terminate_urbs+0x94/0x10c) from [<c01c2d68>] (usbnet_stop+0x100/0x15c) |[<c01c2d68>] (usbnet_stop+0x100/0x15c) from [<c020f718>] (__dev_close_many+0x94/0xc8) defer_bh() takes the lock which is hold during unlink_urbs(). The safe walk suggest that the skb will be removed from the list and this is done by defer_bh() so it seems to be okay to drop the lock here. Cc: stable@kernel.org Reported-by: Aníbal Almeida Pinto <anibal.pinto@efacec.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08mlx4_core: fix bug in modify_cq wrapper for resize flow.Jack Morgenstein
The actual FW command is called in procedure "handle_resize". Code incorrectly invoked the FW command again (in good flow), in the modify_cq wrapper function. Fix by skipping second FW invocation unconditionally for resize. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08atl1c: set ATL1C_WORK_EVENT_RESET bit correctlyDan Carpenter
ATL1C_WORK_EVENT_RESET is zero so the original code here is a nop. The intent was to set the zero bit. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08ehea: restore multicast and rx_errors fieldsEric Dumazet
Commit 239c562c94d (ehea: Add 64bit statistics) added a regression, since we no longer report multicast & rx_errors fields, taken from port->stats structure. These fields are updated in ehea_update_stats() every second. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Tested-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-15 18:30:01 +0000