| Age | Commit message (Collapse) | Author |
|---|
|
Export rt2x00soc_probe from rt2x00soc as it is used in rt2800pci.
Otherwise loading rt2800pci gives "rt2800pci: Unknown symbol
rt2x00soc_probe".
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Handling HT configuration changes involved setting the channel
with the new HT parameters and then issuing a rate_update()
notification to the driver.
This behavior changed after the off-channel changes. Now, the channel
is not updated with the new HT params in enable_ht() - instead, it
is now done when the scan work terminates. This results in the driver
depending on stale information, defaulting to non-HT mode always.
Fix this by passing the new channel type to the driver.
Cc: stable@kernel.org
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
At the wireless summit in Portland we discussed a way of
loading firmware asynchronously from ->probe() before
registration to mac80211, in order to register with the
wireless subsystems with complete information in cases
where firmware is required to know parameters.
This is not yet the case in iwlwifi, but for some new
features we're working on it will be the case since
those will only be supported by new firmware images.
Hence, to start with, convert iwlwifi to load firmware
asynchronously from probe, unbinding the device when
firmware loading fails, and only registering with the
wireless subsystems after firmware has been loaded
successfully.
Future patches will hook into this to register the
new firmware capabilities, depending on the firmware
API version.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This converts ar9170 to load firmware asynchronously
out of ->probe() and only register with mac80211 when
all firmware has been loaded successfully. If, on the
other hand, any firmware fails to load, it will now
unbind from the device.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Compiling rt2800pci with CONFIG_RT2800PCI_SOC fails with "... rt2880pci.c:
error: incompatible type for argument 2 of 'rt2x00soc_probe'".
Fix this by using &rt2800pci_ops instead of rt2800pci_ops.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This adds support for CEIVA USB wireless adapters to the rt73usb driver.
Signed-off-by: Bryan Polk <sainth@eidolons.org>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Since txq->axq_lock may be hold in softirq context, it must be
acquired with spin_lock_bh() instead of spin_lock() if softieq is
enabled.
The patch fixes the lockdep warning below when unloading ath9k modules.
=================================
[ INFO: inconsistent lock state ]
2.6.33-wl #12
---------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
rmmod/3642 [HC0[0]:SC0[0]:HE1:SE1] takes:
(&(&txq->axq_lock)->rlock){+.?...}, at: [<ffffffffa03568c3>] ath_tx_node_cleanup+0x62/0x180 [ath9k]
{IN-SOFTIRQ-W} state was registered at:
[<ffffffff8107577d>] __lock_acquire+0x2f6/0xd35
[<ffffffff81076289>] lock_acquire+0xcd/0xf1
[<ffffffff813a7486>] _raw_spin_lock_bh+0x3b/0x6e
[<ffffffffa0356b49>] spin_lock_bh+0xe/0x10 [ath9k]
[<ffffffffa0358ec7>] ath_tx_tasklet+0xcd/0x391 [ath9k]
[<ffffffffa0354f5f>] ath9k_tasklet+0x70/0xc8 [ath9k]
[<ffffffff8104e601>] tasklet_action+0x8c/0xf4
[<ffffffff8104f459>] __do_softirq+0xf8/0x1cd
[<ffffffff8100ab1c>] call_softirq+0x1c/0x30
[<ffffffff8100c2cf>] do_softirq+0x4b/0xa3
[<ffffffff8104f045>] irq_exit+0x4a/0x8c
[<ffffffff813acccc>] do_IRQ+0xac/0xc3
[<ffffffff813a7d53>] ret_from_intr+0x0/0x16
[<ffffffff81302d52>] cpuidle_idle_call+0x9e/0xf8
[<ffffffff81008be7>] cpu_idle+0x62/0x9d
[<ffffffff81391c1a>] rest_init+0x7e/0x80
[<ffffffff818bbd38>] start_kernel+0x3e8/0x3f3
[<ffffffff818bb2bc>] x86_64_start_reservations+0xa7/0xab
[<ffffffff818bb3b8>] x86_64_start_kernel+0xf8/0x107
irq event stamp: 42037
hardirqs last enabled at (42037): [<ffffffff813a7b21>] _raw_spin_unlock_irqrestore+0x47/0x56
hardirqs last disabled at (42036): [<ffffffff813a72f4>] _raw_spin_lock_irqsave+0x2b/0x88
softirqs last enabled at (42000): [<ffffffffa0353ea6>] spin_unlock_bh+0xe/0x10 [ath9k]
softirqs last disabled at (41998): [<ffffffff813a7463>] _raw_spin_lock_bh+0x18/0x6e
other info that might help us debug this:
4 locks held by rmmod/3642:
#0: (rtnl_mutex){+.+.+.}, at: [<ffffffff8132c10d>] rtnl_lock+0x17/0x19
#1: (&wdev->mtx){+.+.+.}, at: [<ffffffffa01e53f2>] cfg80211_netdev_notifier_call+0x28d/0x46d [cfg80211]
#2: (&ifmgd->mtx){+.+.+.}, at: [<ffffffffa0260834>] ieee80211_mgd_deauth+0x3f/0x17e [mac80211]
#3: (&local->sta_mtx){+.+.+.}, at: [<ffffffffa025a381>] sta_info_destroy_addr+0x2b/0x5e [mac80211]
stack backtrace:
Pid: 3642, comm: rmmod Not tainted 2.6.33-wl #12
Call Trace:
[<ffffffff81074469>] valid_state+0x178/0x18b
[<ffffffff81014f94>] ? save_stack_trace+0x2f/0x4c
[<ffffffff81074e08>] ? check_usage_backwards+0x0/0x88
[<ffffffff8107458f>] mark_lock+0x113/0x230
[<ffffffff810757f1>] __lock_acquire+0x36a/0xd35
[<ffffffff8101018d>] ? native_sched_clock+0x2d/0x5f
[<ffffffffa03568c3>] ? ath_tx_node_cleanup+0x62/0x180 [ath9k]
[<ffffffff81076289>] lock_acquire+0xcd/0xf1
[<ffffffffa03568c3>] ? ath_tx_node_cleanup+0x62/0x180 [ath9k]
[<ffffffff810732eb>] ? trace_hardirqs_off+0xd/0xf
[<ffffffff813a7193>] _raw_spin_lock+0x36/0x69
[<ffffffffa03568c3>] ? ath_tx_node_cleanup+0x62/0x180 [ath9k]
[<ffffffffa03568c3>] ath_tx_node_cleanup+0x62/0x180 [ath9k]
[<ffffffff810749ed>] ? trace_hardirqs_on+0xd/0xf
[<ffffffffa0353950>] ath9k_sta_remove+0x22/0x26 [ath9k]
[<ffffffffa025a08f>] __sta_info_destroy+0x1ad/0x38c [mac80211]
[<ffffffffa025a394>] sta_info_destroy_addr+0x3e/0x5e [mac80211]
[<ffffffffa02605d6>] ieee80211_set_disassoc+0x175/0x180 [mac80211]
[<ffffffffa026084d>] ieee80211_mgd_deauth+0x58/0x17e [mac80211]
[<ffffffff813a60c1>] ? __mutex_lock_common+0x37f/0x3a4
[<ffffffffa01e53f2>] ? cfg80211_netdev_notifier_call+0x28d/0x46d [cfg80211]
[<ffffffffa026786e>] ieee80211_deauth+0x1e/0x20 [mac80211]
[<ffffffffa01f47f9>] __cfg80211_mlme_deauth+0x130/0x13f [cfg80211]
[<ffffffffa01e53f2>] ? cfg80211_netdev_notifier_call+0x28d/0x46d [cfg80211]
[<ffffffff810732eb>] ? trace_hardirqs_off+0xd/0xf
[<ffffffffa01f7eee>] __cfg80211_disconnect+0x111/0x189 [cfg80211]
[<ffffffffa01e5433>] cfg80211_netdev_notifier_call+0x2ce/0x46d [cfg80211]
[<ffffffff813aa9ea>] notifier_call_chain+0x37/0x63
[<ffffffff81068c98>] raw_notifier_call_chain+0x14/0x16
[<ffffffff81322e97>] call_netdevice_notifiers+0x1b/0x1d
[<ffffffff8132386d>] dev_close+0x6a/0xa6
[<ffffffff8132395f>] rollback_registered_many+0xb6/0x2f4
[<ffffffff81323bb8>] unregister_netdevice_many+0x1b/0x66
[<ffffffffa026494f>] ieee80211_remove_interfaces+0xc5/0xd0 [mac80211]
[<ffffffffa02580a2>] ieee80211_unregister_hw+0x47/0xe8 [mac80211]
[<ffffffffa035290e>] ath9k_deinit_device+0x7a/0x9b [ath9k]
[<ffffffffa035bc26>] ath_pci_remove+0x38/0x76 [ath9k]
[<ffffffff8120940a>] pci_device_remove+0x2d/0x51
[<ffffffff8129d797>] __device_release_driver+0x7b/0xd1
[<ffffffff8129d885>] driver_detach+0x98/0xbe
[<ffffffff8129ca7a>] bus_remove_driver+0x94/0xb7
[<ffffffff8129ddd6>] driver_unregister+0x6c/0x74
[<ffffffff812096d2>] pci_unregister_driver+0x46/0xad
[<ffffffffa035bae1>] ath_pci_exit+0x15/0x17 [ath9k]
[<ffffffffa035e1a2>] ath9k_exit+0xe/0x2f [ath9k]
[<ffffffff8108050a>] sys_delete_module+0x1c7/0x236
[<ffffffff813a7df5>] ? retint_swapgs+0x13/0x1b
[<ffffffff810749b5>] ? trace_hardirqs_on_caller+0x119/0x144
[<ffffffff8109b9f6>] ? audit_syscall_entry+0x11e/0x14a
[<ffffffff81009bb2>] system_call_fastpath+0x16/0x1b
wlan1: deauthenticating from 00:23:cd:e1:f9:b2 by local choice (reason=3)
PM: Removing info for No Bus:wlan1
cfg80211: Calling CRDA to update world regulatory domain
PM: Removing info for No Bus:rfkill2
PM: Removing info for No Bus:phy1
ath9k 0000:16:00.0: PCI INT A disabled
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
The first chunk fixes a debugging assert to print a warning about array underflows.
The second chunk corrects a potential array underflow. I also removed an assert
in the second chunk because it can no longer happen.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Benoit Papillault <benoit.papillault@free.fr>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Even if keylen == 0 is a bug and should not really happen, better avoid
possibility of passing bad value to firmware.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This is no longer needed. I missed to remove this in
567ec874d15b478c8eda7e9a5d2dcb05f13f1fb5 ("net: convert multiple
drivers to use netdev_for_each_mc_addr, part6")
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In tx/mcc polling, napi_complete() is being incorrectly called
before reaping tx completions. This can cause tx compl processing
to be scheduled on another cpu concurrently which can result in a panic.
This if fixed by calling napi complete() after tx/mcc compl processing
but before re-enabling interrupts (via a cq notify).
Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some sis190 devices don't report LinkChange, so do polling for
link status.
Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11926
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Conflicts:
drivers/firmware/iscsi_ibft.c
|
|
[Resending with the proper subject. Sorry for the mess. ]
This patch is based on the RFC of Stanislaw Gruszka.
More specifically it fixes two possible races:
- One, described by Stanislaw, may lead to permanent disabling of the Tx
queue.
This is fixed by adding the smp_wmb() to propagate the BD consumer
change towards the memory.
- Second may lead to bnx2x_start_xmit() returning NETDEV_TX_BUSY.
This is fixed by taking a tx_lock() before rechecking the number of
available Tx BDs.
thanks,
vlad
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-pci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Enable NMI on all cpus on UV
vgaarb: Add user selectability of the number of GPUS in a system
vgaarb: Fix VGA arbiter to accept PCI domains other than 0
x86, uv: Update UV arch to target Legacy VGA I/O correctly.
pci: Update pci_set_vga_state() to call arch functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, cacheinfo: Enable L3 CID only on AMD
x86, cacheinfo: Remove NUMA dependency, fix for AMD Fam10h rev D1
x86, cpu: Print AMD virtualization features in /proc/cpuinfo
x86, cacheinfo: Calculate L3 indices
x86, cacheinfo: Add cache index disable sysfs attrs only to L3 caches
x86, cacheinfo: Fix disabling of L3 cache indices
intel-agp: Switch to wbinvd_on_all_cpus
x86, lib: Add wbinvd smp helpers
|
|
guest to remote communication with vhost net sometimes stops until
guest driver is restarted. This happens when we get guest kick precisely
when the backend send queue is full, as a result handle_tx() returns without
polling backend. This patch fixes this by restarting tx poll on this condition.
Signed-off-by: Sridhar Samudrala <samudrala@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Tom Lendacky <toml@us.ibm.com>
|
|
get_user_pages_fast returns number of pages on success, negative value
on failure, but never 0. Fix vhost code to match this logic.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
vq log eventfd context pointer needs to be initialized, otherwise
operation may fail or oops if log is enabled but log eventfd not set by
userspace. When log_ctx for device is created, it is copied to the vq.
This reset was missing.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
vhost was dong some complex math to get
offset to log at, and got it wrong by a couple of bytes,
while in fact it's simple: get address where we write,
subtract start of buffer, add log base.
Do it this way.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
also added missed locking in rndis_wlan.c
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Apparently bogus mc address can break IPOIB multicast processing. Therefore
returning the check for addrlen back until this is resolved in bonding (I don't
see any other point from where mc address with non-dev->addr_len length can came
from).
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
axnet_cs:
add new id (corega PCC-TXM)
Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-next-2.6
|
|
Now that the VPD searching code is abstracted away, the outer loop used
to detect the read-only large resource data type section is useless.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that the VPD searching code is abstracted away, the outer loop used
to detect the read-only large resource data type section is useless.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the pci_vpd_find_info_keyword() helper function to
find information field keywords within read-only and read-write large
resource data type sections.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a preprocessor constant to describe the PCI VPD
information field header size and an inline function to extract the
size of the information field itself.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the pci_vpd_find_tag() helper function to find VPD
resource data types in a buffer.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch introduces more VPD preprocessor definitions to identify some
small and large resource data type item names. The patch then continues
to correct how the tg3 and bnx2 drivers search for the "read-only data"
large resource data type.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a preprocessor constant to describe the PCI VPD large
resource data type tag size and an inline function to extract the large
resource section size from the large resource data type tag.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (24 commits)
m68k: Define sigcontext ABI of ColdFire
m68knommu: NPTL support for uClinux
m68k: Add NPTL support
m68k: Eliminate unused variable in page_to_phys()
m68k: Switch to generic siginfo layout
macfb: fix 24-bit visual and stuff
macfb: cleanup
fbdev: add some missing mac modes
mac68k: start CUDA early
valkyriefb: various fixes
fbdev: mac_var_to_mode() fix
mac68k: move macsonic and macmace platform devices
mac68k: move mac_esp platform device
mac68k: replace mac68k SCC code with platform device
pmac-zilog: add platform driver
pmac-zilog: cleanup
mac68k: rework SWIM platform device
mac68k: cleanup
ataflop: Killl warning about unused variable flags
m68k: Use DIV_ROUND_CLOSEST
...
|
|
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (35 commits)
[S390] time: remove unused code
[S390] zcore: Add prefix registers to dump header
[S390] correct vdso version string
[S390] add support for compressed kernels
[S390] Define new s390 ELF note sections in elf.h
[S390] codepage conversion of kernel parameter line
[S390] seq_file: convert drivers/s390/
[S390] add z9-ec/z10 instruction to kernel disassembler
[S390] dasd: correct offline processing
[S390] dasd: fix refcounting.
[S390] dasd: fix online/offline race
[S390] use kprobes_built_in() in mm/fault code
[S390] bug: use relative pointers in bug table entries
[S390] Cleanup struct _lowcore usage and defines.
[S390] free_initmem: reduce code duplication
[S390] Replace ENOTSUPP usage with EOPNOTSUPP
[S390] spinlock: check virtual cpu running status
[S390] sysinfo: fix SYSIB 3,2,2 structure
[S390] add MACHINE_IS_LPAR flag
[S390] qdio: optimize cache line usage of struct qdio_irq
...
|
|
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (141 commits)
MIPS: Alchemy: defconfig updates
MIPS: Alchemy: Fix Au1100 ethernet build failure
MIPS: Alchemy: Repair db1500/bosporus builds
MIPS: ARC: Cleanup unused definitions from sgialib.h
MIPS: Cobalt: convert legacy port addresses to GT-64111 bus addresses
MIPS: Alchemy: use 36bit addresses for PCMCIA resources.
MIPS: Cobalt: Fix theoretical port aliasing issue
MIPS: Use ALIGN(x, bytes) instead of __ALIGN_MASK(x, bytes - 1)
MIPS: Crazy spinlock speed test.
MIPS: Optimize spinlocks.
MIPS: Alchemy: devboard PM needs to save CPLD registers.
MIPS: PowerTV: Eliminate duplicate opcode definition macros
MIPS: Lemote 2F: Move printks out of port_access_lock.
MIPS: PNX833x: Convert IRQ controller locks to raw spinlocks.
MIPS: Octeon: Replace spinlock with raw_spinlocks in dma-octeon.c.
MIPS: Octeon: Replace rwlocks in irq_chip handlers with raw_spinlocks.
MIPS: Octeon: Convert octeon_irq_msi_lock to raw spinlock.
MIPS: Loongson: Remove pointless sample_lock from oprofile code.
MIPS: SNI: Convert sni_rm200_i8259A_lock to raw spinlock.
MIPS: i8259: Convert IRQ controller lock to raw spinlock.
...
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (49 commits)
pcmcia: validate late-added resources
pcmcia: allow for extension of resource interval
pcmcia: remove useless msleep in ds.c
pcmcia: use read_cis_mem return value
pcmcia: handle error in serial_cs config calls
pcmcia: add locking to pcmcia_{read,write}_cis_mem
pcmcia: avoid prod_id memleak
pcmcia: avoid sysfs-related lockup for cardbus
pcmcia: use state machine for extended requery
pcmcia: delay re-scanning and re-querying of PCMCIA bus
pcmcia: use pccardd to handle eject, insert, suspend and resume requests
pcmcia: use ops_mutex for rsrc_{mgr,nonstatic} locking
pcmcia: use mutex for dynid lock
pcmcia: assert locking to struct pcmcia_device
pcmcia: add locking documentation
pcmcia: simplify locking
pcmcia: add locking to struct pcmcia_socket->pcmcia_state()
pcmcia: protect s->device_count
pcmcia: properly lock skt->irq, skt->irq_mask
pcmcia: lock ops->set_socket
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (88 commits)
powerpc: Fix lwsync feature fixup vs. modules on 64-bit
powerpc: Convert pmc_owner_lock to raw_spinlock
powerpc: Convert die.lock to raw_spinlock
powerpc: Convert tlbivax_lock to raw_spinlock
powerpc: Convert mpic locks to raw_spinlock
powerpc: Convert pmac_pic_lock to raw_spinlock
powerpc: Convert big_irq_lock to raw_spinlock
powerpc: Convert feature_lock to raw_spinlock
powerpc: Convert i8259_lock to raw_spinlock
powerpc: Convert beat_htab_lock to raw_spinlock
powerpc: Convert confirm_error_lock to raw_spinlock
powerpc: Convert ipic_lock to raw_spinlock
powerpc: Convert native_tlbie_lock to raw_spinlock
powerpc: Convert beatic_irq_mask_lock to raw_spinlock
powerpc: Convert nv_lock to raw_spinlock
powerpc: Convert context_lock to raw_spinlock
powerpc/85xx: Add NOR, LEDs and PIB support for MPC8568E-MDS boards
powerpc/86xx: Enable VME driver on the GE SBC610
powerpc/86xx: Enable VME driver on the GE PPC9A
powerpc/86xx: Add MSI section to GE PPC9A DTS
...
|
|
Lots of changes. Remove volatile keywords. Take the advice in the comments
and change video_slot to slot_addr. Factor out fifteen or so "channel >>
8" shifts into three shifts higher up the call graph. Make
csc_setpalette() atomic, pass the correct color values. Check for
ioremap() failure. Add missing break statement, thus fixing 24 bit console
visual (blue background bug). Remove some uninformative printk() noise.
Add a description for powerbook 140/170 graphics.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Cleanup whitespace and code style. Remove unused #includes and prototypes.
Remove obsolete, redundant or misleading comments. Remove dead code and
redundant initialisers.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Add the missing mac video modes for the Portrait and 12" RGB displays. The
specs come from the Mac LC III developer note.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
The valkyriefb driver needs the CUDA to work in order to set the video
mode at boot. So initialise the device earlier, and bring the m68k code
closer to the powermac code.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Valkyriefb and macfb will adopt the same card if they get the chance, so
remove valkyrie support from macfb. Also fix the "valkyriefb: can't do
832x624x8" problem reported by Raylynn Knight some time ago, by adding
vmode 13 support for CONFIG_MAC. Also add vmode 11 since that works too.
Make use of the monitor sense lines on 68k Macs too. Also some cleanups.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
The valkyriefb driver assumes that this logic holds:
mac_vmode_to_var(X, cmode, &var);
mac_var_to_vmode(&var, &vmode, &cmode);
assert(vmode == X);
But it doesn't hold because mac_var_to_vmode() can return a mode with a
slower pixel clock, even when a match is available. So we end up with this
failure:
using video mode 11 and color mode 0.
valkyriefb: vmode 12 not valid.
valkyriefb: can't set default video mode
valkyriefb: vmode 12 not valid.
Rather than have mac_var_to_mode() return the first reasonable mode it
finds, have it return the mode that is closest to the requested one (or
the mode with the closest longer pixel clock period if there is no exact
match).
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Move platform device code from the drivers to the platform init function.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Move platform device code from the driver to the platform init function.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Add platform driver support to the pmac-zilog driver, for m68k macs.
Place the powermac-specific code inside #ifdef CONFIG_PPC_PMAC.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Whitespace cleanups and comment typo fix.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Adjust the platform device code to conform with the code style used in the
rest of this patch series. No need to name resources nor to register
devices which are not applicable.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
After commit e0c0978699a83f26f2341f7eedc1463b79e31aff ("ataflop: remove
buggy/commented-out IRQ disable from do_fd_request()") the `flags' variable
became unused:
drivers/block/ataflop.c:1473: warning: unused variable 'flags'
Hence remove it.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Trivial patch which adds the __init macro to the module_init
function and all of its helper functions of drivers/char/vme_scc.c
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
The debugfs support of the Marvell driver is buggy. It is limited to one
controller per system. Fix this by using the controller specific debugfs
directory as parent.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
