summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-01-20mlxsw: spectrum: Set RIF ops per ASIC typeNir Dotan
Set RIF ops array as member of mlxsw_sp in order to control which RIF operations callbacks are called per ASIC type. This is needed to control per ASIC handling of loopback RIF configurations. Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-20mlxsw: spectrum_router: Split RIF ops array for Spectrum-2 supportNir Dotan
Split RIF ops array for Spectrum-1 and Spectrum-2 callbacks in order to support different sets of operations for loopback RIF handling, as underlying implementation differs between the ASICs. Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-20mlxsw: reg: Add underlay egress RIF field in RTDP registerIdo Schimmel
In Spectrum-2 we need to specify the underlay egress router interface when performing IP-in-IP and NVE packet decapsulation in the underlay router. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-20mlxsw: reg: Add fields to RITR - Router Interface Table RegisterNir Dotan
Add fields relevant for Spectrum-2 Loopback IPinIP router interface creation. Add additional Loopback RIF protocol value - Generic, used for creation of an explicit underlay RIF, and also add a field named underlay_rif used for specifying the underlay RIF of a tunnel. Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-21Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio/vhost fixes and cleanups from Michael Tsirkin: "Fixes and cleanups all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost/scsi: Use copy_to_iter() to send control queue response vhost: return EINVAL if iovecs size does not match the message size virtio-balloon: tweak config_changed implementation virtio: don't allocate vqs when names[i] = NULL virtio_pci: use queue idx instead of array idx to set up the vq virtio: document virtio_config_ops restrictions virtio: fix virtio_config_ops description
2019-01-19r8169: factor out getting ether_clkHeiner Kallweit
rtl_init_one() is complex enough, so we better factor out getting the ether_clk. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19r8169: replace mii_bus member with phy_device member in struct rtl8169_privateHeiner Kallweit
Accessing the phy_device indirectly via the netdevice causes few issues: - Accessing the phy_device when it's not attached may cause a NPE. - If we have to access the phy_device when it's not attached we have to use mdiobus_get_phy() to get a reference to the phy_device. Therefore store a phy_device reference in struct rtl8169_private directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19r8169: reset chip synchronously in __rtl8169_resumeHeiner Kallweit
Triggering an asynchronous reset is problematic for the following reasons, therefore reset the chip synchronously. - The reset routine resets registers and parameters behind our back what may collide with code executed after triggering the reset. - __rtl8169_resume() is called as part of pm_runtime_get_sync() and callers expect that the chip is fully resumed afterwards. In context of this driver triggering an asynchonous reset should be considered an emergency procedure. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19r8169: add helpers for locking / unlocking the config registersHeiner Kallweit
Add helpers for locking / unlocking the config registers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19r8169: improve rtl_pcie_state_l2l3_enableHeiner Kallweit
All calls to this function have the enable parameter set to false. So we can replace the function with a disable-only version. v2: - fixed copy & paste error Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19r8169: initialize task workqueue only onceHeiner Kallweit
It's sufficient to initialize the workqueue once, therefore remove the additional initialization whenever rtl_open() is called. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19r8169: remove unneeded call in pcierrHeiner Kallweit
rtl8169_hw_reset() is called as part of the reset routine which is scheduled in the line after. So we can remove the call to rtl8169_hw_reset() here. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19r8169: remove rtl_get_eventsHeiner Kallweit
This helper is used only once, so remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19virtio_net: bulk free tx skbsMichael S. Tsirkin
Use napi_consume_skb() to get bulk free. Note that napi_consume_skb is safe to call in a non-napi context as long as the napi_budget flag is correct. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-20Merge tag 'libnvdimm-fixes-5.0-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "A crash fix, a build warning fix, a miscellaneous small cleanups. In case anyone is looking for them, there was a regression caught by testing that caused two patches to be dropped from this update. Those patches have been reworked and will soak for another week / re-target 5.0-rc4. - Fix driver initialization crash due to the inability to report an 'error' state for a DIMM's security capability. - Build warning fix for little-endian ARM64 builds - Fix a potential race between the EDAC driver's usage of the NFIT SMBIOS id for a DIMM and the driver shutdown path. - A small collection of one-line benign cleanups for duplicate variable assignments, a duplicate header include and a mis-typed function argument" * tag 'libnvdimm-fixes-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm/security: Fix nvdimm_security_state() state request selection acpi/nfit: Remove duplicate set nd_set in acpi_nfit_init_interleave_set() acpi/nfit: Fix race accessing memdev in nfit_get_smbios_id() libnvdimm/dimm: Fix security capability detection for non-Intel NVDIMMs nfit: Mark some functions as __maybe_unused ACPI/nfit: delete the function to_acpi_nfit_desc ACPI/nfit: delete the redundant header file
2019-01-20Merge tag 'linux-watchdog-5.0-rc-fixes' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog fixes from Wim Van Sebroeck: - mt7621_wdt/rt2880_wdt: Fix compilation problem - tqmx86: Fix a couple IS_ERR() vs NULL bugs * tag 'linux-watchdog-5.0-rc-fixes' of git://www.linux-watchdog.org/linux-watchdog: watchdog: tqmx86: Fix a couple IS_ERR() vs NULL bugs watchdog: mt7621_wdt/rt2880_wdt: Fix compilation problem
2019-01-20Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "A set of 17 fixes. Most of these are minor or trivial. The one fix that may be serious is the isci one: the bug can cause hba parameters to be set from uninitialized memory. I don't think it's exploitable, but you never know" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: cxgb4i: add wait_for_completion() scsi: qla1280: set 64bit coherent mask scsi: ufs: Fix geometry descriptor size scsi: megaraid_sas: Retry reads of outbound_intr_status reg scsi: qedi: Add ep_state for login completion on un-reachable targets scsi: ufs: Fix system suspend status scsi: qla2xxx: Use correct number of vectors for online CPUs scsi: hisi_sas: Set protection parameters prior to adding SCSI host scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comes scsi: isci: initialize shost fully before calling scsi_add_host() scsi: lpfc: lpfc_sli: Mark expected switch fall-throughs scsi: smartpqi_init: fix boolean expression in pqi_device_remove_start scsi: core: Synchronize request queue PM status only on successful resume scsi: pm80xx: reduce indentation scsi: qla4xxx: check return code of qla4xxx_copy_from_fwddb_param scsi: megaraid_sas: correct an info message scsi: target/iscsi: fix error msg typo when create lio_qr_cache failed scsi: sd: Fix cache_type_store()
2019-01-20Merge tag 'for-linus-20190118' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - block size setting fixes for loop/nbd (Jan Kara) - md bio_alloc_mddev() cleanup (Marcos) - Ensure we don't lose the REQ_INTEGRITY flag (Ming) - Two NVMe fixes by way of Christoph: - Fix NVMe IRQ calculation (Ming) - Uninitialized variable in nvmet-tcp (Sagi) - BFQ comment fix (Paolo) - License cleanup for recently added blk-mq-debugfs-zoned (Thomas) * tag 'for-linus-20190118' of git://git.kernel.dk/linux-block: block: Cleanup license notice nvme-pci: fix nvme_setup_irqs() nvmet-tcp: fix uninitialized variable access block: don't lose track of REQ_INTEGRITY flag blockdev: Fix livelocks on loop device nbd: Use set_blocksize() to set device blocksize md: Make bio_alloc_mddev use bio_alloc_bioset block, bfq: fix comments on __bfq_deactivate_entity
2019-01-19isdn: remove unneeded semicolonYueHaibing
remove unneeded semicolon Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19net: usb: rtl8150: remove set but not used variable 'rx_stat'Yue Haibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/usb/rtl8150.c: In function 'read_bulk_callback': drivers/net/usb/rtl8150.c:391:6: warning: variable 'rx_stat' set but not used [-Wunused-but-set-variable] Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19dpaa2-eth: add debugfs statisticsIoana Radulescu
Export detailed driver counters through debugfs. Statistics already available in ethtool are presented in a structured manner. Includes per-core, per-FQ and per-channel statistics. Also transition from module_fsl_mc_driver to explicit module_init/exit in order to create the debugfs directory besides registering the driver. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19dpaa2-eth: transform dpaa2_eth_queue_count into a macroIoana Ciornei
Transform dpaa2_eth_queue_count into a macro to follow the the convention used by dpaa2_eth_fs_count and other functions. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19virtio-net: per-queue RPS configWillem de Bruijn
On multiqueue network devices, RPS maps are configured independently for each receive queue through /sys/class/net/$DEV/queues/rx-*. On virtio-net currently all packets use the map from rx-0, because the real rx queue is not known at time of map lookup by get_rps_cpu. Call skb_record_rx_queue in the driver rx path to make lookup work. Recording the receive queue has ramifications beyond RPS, such as in sticky load balancing decisions for sockets (skb_tx_hash) and XPS. Reported-by: Mark Hlady <mhlady@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19net: phy: phy driver features are mandatoryCamelia Groza
Since phy driver features became a link_mode bitmap, phy drivers that don't have a list of features configured will cause the kernel to crash when probed. Prevent the phy driver from registering if the features field is missing. Fixes: 719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap") Reported-by: Scott Wood <oss@buserror.net> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19isdn: avm: Fix string plus integer warning from ClangNathan Chancellor
A recent commit in Clang expanded the -Wstring-plus-int warning, showing some odd behavior in this file. drivers/isdn/hardware/avm/b1.c:426:30: warning: adding 'int' to a string does not append to the string [-Wstring-plus-int] cinfo->version[j] = "\0\0" + 1; ~~~~~~~^~~ drivers/isdn/hardware/avm/b1.c:426:30: note: use array indexing to silence this warning cinfo->version[j] = "\0\0" + 1; ^ & [ ] 1 warning generated. This is equivalent to just "\0". Nick pointed out that it is smarter to use "" instead of "\0" because "" is used elsewhere in the kernel and can be deduplicated at the linking stage. Link: https://github.com/ClangBuiltLinux/linux/issues/309 Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18Merge tag 'mlx5-fixes-2019-01-18' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-01-18 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v4.18 ('net/mlx5e: Force CHECKSUM_UNNECESSARY for short ethernet frames') The patch doesn't apply cleanly to 4.18.y, but it is very simple to resolve, what should be the procedure here ? ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net/mlx5e: Fix cb_ident duplicate in indirect block registerEli Britstein
Previously the identifier used for indirect block callback registry and for block rule cb registry (when done via indirect blocks) was the pointer to the tunnel netdev we were interested in receiving updates on. This worked fine if a single PF existed that registered one callback for the tunnel netdev of interest. However, if multiple PFs are in place then the 2nd PF tries to register with the same tunnel netdev identifier. This leads to EEXIST errors and/or incorrect cb deletions. Prevent this conflict by using the rpriv pointer as the identifier for netdev indirect block cb registry, allowing each PF to register a unique callback per tunnel netdev. For block cb registry, the same PF may register multiple cbs to the same block if using TC shared blocks. Instead of the rpriv, use the pointer to the allocated indr_priv data as the identifier here. This means that there can be a unique block callback for each PF/tunnel netdev combo. Fixes: f5bc2c5de101 ("net/mlx5e: Support TC indirect block notifications for eswitch uplink reprs") Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-01-18net/mlx5e: Fix wrong (zero) TX drop counter indication for representorTariq Toukan
For representors, the TX dropped counter is not folded from the per-ring counters. Fix it. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-01-18net/mlx5e: Fix wrong error code return on FEC query failureShay Agroskin
Advertised and configured FEC query failure resulted in printing wrong error code. Fixes: 6cfa94605091 ("net/mlx5e: Ethtool driver callback for query/set FEC policy") Signed-off-by: Shay Agroskin <shayag@mellanox.com> Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-01-18net/mlx5e: Force CHECKSUM_UNNECESSARY for short ethernet framesCong Wang
When an ethernet frame is padded to meet the minimum ethernet frame size, the padding octets are not covered by the hardware checksum. Fortunately the padding octets are usually zero's, which don't affect checksum. However, we have a switch which pads non-zero octets, this causes kernel hardware checksum fault repeatedly. Prior to: commit '88078d98d1bb ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE ...")' skb checksum was forced to be CHECKSUM_NONE when padding is detected. After it, we need to keep skb->csum updated, like what we do for RXFCS. However, fixing up CHECKSUM_COMPLETE requires to verify and parse IP headers, it is not worthy the effort as the packets are so small that CHECKSUM_COMPLETE can't save anything. Fixes: 88078d98d1bb ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"), Cc: Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-01-18mlxsw: spectrum_switchdev: Do not treat static FDB entries as stickyIdo Schimmel
The driver currently treats static FDB entries as both static and sticky. This is incorrect and prevents such entries from being roamed to a different port via learning. Fix this by configuring static entries with ageing disabled and roaming enabled. In net-next we can add proper support for the newly introduced 'sticky' flag. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alexander Petrovskiy <alexpe@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18mlxsw: spectrum_fid: Update dummy FID indexNir Dotan
When using a tc flower action of egress mirred redirect, the driver adds an implicit FID setting action. This implicit action sets a dummy FID to the packet and is used as part of a design for trapping unmatched flows in OVS. While this implicit FID setting action is supposed to be a NOP when a redirect action is added, in Spectrum-2 the FID record is consulted as the dummy FID index is an 802.1D FID index and the packet is dropped instead of being redirected. Set the dummy FID index value to be within 802.1Q range. This satisfies both Spectrum-1 which ignores the FID and Spectrum-2 which identifies it as an 802.1Q FID and will then follow the redirect action. Fixes: c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC") Signed-off-by: Nir Dotan <nird@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18mlxsw: pci: Return error on PCI reset timeoutNir Dotan
Return an appropriate error in the case when the driver timeouts on waiting for firmware to go out of PCI reset. Fixes: 233fa44bd67a ("mlxsw: pci: Implement reset done check") Signed-off-by: Nir Dotan <nird@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18mlxsw: pci: Increase PCI SW reset timeoutNir Dotan
Spectrum-2 PHY layer introduces a calibration period which is a part of the Spectrum-2 firmware boot process. Hence increase the SW timeout waiting for the firmware to come out of boot. This does not increase system boot time in cases where the firmware PHY calibration process is done quickly. Fixes: c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC") Signed-off-by: Nir Dotan <nird@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18mlxsw: pci: Ring CQ's doorbell before RDQ'sIdo Schimmel
When a packet should be trapped to the CPU the device consumes a WQE (work queue element) from an RDQ (receive descriptor queue) and copies the packet to the address specified in the WQE. The device then tries to post a CQE (completion queue element) that contains various metadata (e.g., ingress port) about the packet to a CQ (completion queue). In case the device managed to consume a WQE, but did not manage to post the corresponding CQE, it will get stuck. This unlikely situation can be triggered due to the scheme the driver is currently using to process CQEs. The driver will consume up to 512 CQEs at a time and after processing each corresponding WQE it will ring the RDQ's doorbell, letting the device know that a new WQE was posted for it to consume. Only after processing all the CQEs (up to 512), the driver will ring the CQ's doorbell, letting the device know that new ones can be posted. Fix this by having the driver ring the CQ's doorbell for every processed CQE, but before ringing the RDQ's doorbell. This guarantees that whenever we post a new WQE, there is a corresponding CQE available. Copy the currently processed CQE to prevent the device from overwriting it with a new CQE after ringing the doorbell. Note that the driver still arms the CQ only after processing all the pending CQEs, so that interrupts for this CQ will only be delivered after the driver finished its processing. Before commit 8404f6f2e8ed ("mlxsw: pci: Allow to use CQEs of version 1 and version 2") the issue was virtually impossible to trigger since the number of CQEs was twice the number of WQEs and the number of CQEs processed at a time was equal to the number of available WQEs. Fixes: 8404f6f2e8ed ("mlxsw: pci: Allow to use CQEs of version 1 and version 2") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Semion Lisyansky <semionl@mellanox.com> Tested-by: Semion Lisyansky <semionl@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: hns3: add HNAE3_RESTORE_CLIENT interface in enet moduleYunsheng Lin
The HNAE3_INIT_CLIENT interface is also used when changing tc configuration, vlan/mac hardware table does not need to be restored when tc configuration changes. This patch adds a HNAE3_RESTORE_CLIENT interface to restore the vlan/mac hardware table when resetting. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: hns3: do reinitialization while ETS configuration changedHuazhong Tan
When the ETS information is changed, the network device needs to be re-initialized, otherwise the information such as the receiving queue will be incorrect. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: hns3: fix wrong combined count returned by ethtool -lHuazhong Tan
The current code returns the number of all queues that can be used and the number of queues that have been allocated, which is incorrect. What should be returned is the number of queues allocated for each enabled TC and the number of queues that can be allocated. This patch fixes it. Fixes: 482d2e9c1cc7 ("net: hns3: add support to query tqps number") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: hns3: adjust the use of alloc_tqps and num_tqpsHuazhong Tan
The alloc_tqps field of struct hclge_vport represents the total number of tqps allocated to the vport. The num_tqps of struct hnae3_knic_private_info indicates the total number of all enabled tqps, which needs to be distinguished during use. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: hns3: fix user configuration loss for ethtool -LHuazhong Tan
Ethtool -L option with the combined parameter is for changing the number of multi-purpose channels of the specified network device. Under the current scheme, the user configuration information will be lost after the reset or TC information changed. This patch fixes this issue. By default, this configuration is set to the minimum between the number of queues for each enabled TCs and the maximum number support available in the hardware. When there is a user configuration, regardless of the reset or TC information change, it should keep the user's configuration while it is under the hardware limits, otherwise set to the maximum number support available in the hardware. Fixes: 09f2af6405b8 ("net: hns3: add support to modify tqps number") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: hns3: remove redundant codes in hclge_knic_setupHuazhong Tan
The TC info will be updated in hclge_tm_vport_tc_info_update(), so hclge_knic_setup() no need to do it again. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: hns3: modify parameter checks in the hns3_set_channelsHuazhong Tan
The number of queues for each enabled TC should range from 1 to the maximum available value, and return directly if the value is same as the current one. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: hns3: add interface hclge_tm_bp_setupHuazhong Tan
Provide a common interface to complete the back pressure settings of all enabled TCs. So other functions directly call this interface to complete the corresponding operation. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: hns3: reuse reinitialization interface in the hns3_set_channelsHuazhong Tan
There is already common interface for network device reinitialization, so hns3_set_channels() should just call them. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: hns3: remove unnecessary hns3_adjust_tqps_numHuazhong Tan
The parameter passed to hns3_set_channels() are already the number of queues per channel of the enabled TC, so it is not need to divide the number of enabled TCs. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: hns3: remove unused member in struct hns3_enet_ringHuazhong Tan
The irq_init_flag field in struct hns3_enet_ring is unnecessary. This patch removes it. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: hns3: modify enet reinitialization interfaceHuazhong Tan
hns3_reset_notify_init_enet and hns3_reset_notify_uninit_enet are the reinitialization interface that will be called when the device reset, the number of TC changed, or the queue length changed. So these two function should call hns3_get_ring_config() and hns3_put_ring_config() to allocate and free memory for the ring with the correct number. Also this patch fixes a double free problem when hns3_reset_notify_uninit_enet calling hns3_nic_dealloc_vector_data Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net/mlx5e: Add TX timeout support for mlx5e TX reporterEran Ben Elisha
With this patch, ndo_tx_timeout callback will be redirected to the TX reporter in order to detect a TX timeout error and report it to the devlink health. (The watchdog detects TX timeouts, but the driver verify the issue still exists before launching any recover method). In addition, recover from TX timeout in case of lost interrupt was added to the TX reporter recover method. The TX timeout recover from lost interrupt is not a new feature in the driver, this patch re-organize the functionality and move it to the TX reporter recovery flow. TX timeout example: (with auto_recover set to false, if set to true, the manual recover and diagnose sections are irrelevant) $cat /sys/kernel/debug/tracing/trace ... devlink_health_report: bus_name=pci dev_name=0000:00:09.0 driver_name=mlx5_core reporter_name=TX: TX timeout on queue: 0, SQ: 0xd8a, CQ: 0x406, SQ Cons: 0x2 SQ Prod: 0x2, usecs since last trans: 13972000 $devlink health diagnose pci/0000:00:09 reporter TX SQ 0xd8a: HW state: 1, stopped: 1 SQ 0xe44: HW state: 1, stopped: 0 SQ 0xeb4: HW state: 1, stopped: 0 SQ 0xf1f: HW state: 1, stopped: 0 SQ 0xf80: HW state: 1, stopped: 0 SQ 0xfe5: HW state: 1, stopped: 0 $devlink health recover pci/0000:00:09 reporter TX $devlink health show pci/0000:00:09.0: name TX state healthy #err 1 #recover 1 last_dump_ts N/A dump_available false attributes: grace_period 500 auto_recover false Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net/mlx5e: Add TX reporter supportEran Ben Elisha
Add mlx5e tx reporter to devlink health reporters. This reporter will be responsible for diagnosing, reporting and recovering of TX errors. This patch declares the TX reporter operations and allocate it using the devlink health API. Currently, this reporter supports reporting and recovering from send error CQE only. In addition, it adds diagnose information for the open SQs. For a local SQ recover (due to driver error report), in case of SQ recover failure, the recover operation will be considered as a failure. For a full TX recover, an attempt to close and open the channels will be done. If this one passed successfully, it will be considered as a successful recover. The SQ recover from error CQE flow is not a new feature in the driver, this patch re-organize the functions and adapt them for the devlink health API. For this purpose, move code from en_main.c to a new file named reporter_tx.c. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18net: phy: remove phy_stop_interruptsHeiner Kallweit
Interrupts have been disabled in phy_stop() already. So we can remove phy_stop_interrupts() and free the interrupt in phy_disconnect() directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 15:36:07 +0000