Age | Commit message (Collapse) | Author |
|
$ lsusb:
Bus 001 Device 101: ID 1e0e:9001 Qualcomm / Option
$ usb-devices:
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=101 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 2
P: Vendor=1e0e ProdID=9001 Rev= 2.32
S: Manufacturer=SimTech, Incorporated
S: Product=SimTech, Incorporated
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
The last interface (6) is used for Android Composite ADB interface.
Serial port layout:
0: QCDM/DIAG
1: NMEA
2: AT
3: AT/PPP
4: audio
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are 3 fixes for some reported issues. Two nvmem driver fixes,
and one mei fix. All have been in linux-next just fine"
* tag 'char-misc-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
nvmem: qfprom: Specify LE device endianness
nvmem: core: return error for non word aligned access
mei: validate request value in client notify request ioctl
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are a number of small tty and serial driver fixes for 4.5-rc4
that resolve some reported issues.
One of them got reverted as it wasn't correct based on testing, and
all have been in linux-next for a while"
* tag 'tty-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "8250: uniphier: allow modular build with 8250 console"
pty: make sure super_block is still valid in final /dev/tty close
pty: fix possible use after free of tty->driver_data
tty: Add support for PCIe WCH382 2S multi-IO card
serial/omap: mark wait_for_xmitr as __maybe_unused
serial: omap: Prevent DoS using unprivileged ioctl(TIOCSRS485)
8250: uniphier: allow modular build with 8250 console
tty: Drop krefs for interrupted tty lock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull PHY fixes from Greg KH:
"Here are a couple of PHY driver fixes for 4.5-rc4.
A few small phy issues. All have been in linux-next with no reported
issues"
* tag 'usb-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
phy: twl4030-usb: Fix unbalanced pm_runtime_enable on module reload
phy: twl4030-usb: Relase usb phy on unload
phy: core: fix wrong err handle for phy_power_on
phy: Restrict phy-hi6220-usb to HiSilicon arm64
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irqchip fixes from Thomas Gleixner:
"Another set of ARM SoC related irqchip fixes:
- Plug a memory leak in gicv3-its
- Limit features to the root gic interrupt controller
- Add a missing barrier in the gic-v3 IAR access
- Another compile test fix for sun4i"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3: Make sure read from ICC_IAR1_EL1 is visible on redestributor
irqchip/gic: Only set the EOImodeNS bit for the root controller
irqchip/gic: Only populate set_affinity for the root controller
irqchip/gicv3-its: Fix memory leak in its_free_tables()
irqchip/sun4i: Fix compilation outside of arch/arm
|
|
Pull component helper fixes from Russell King:
"A few fixes for problems people have encountered with the recent
update to the component helpers"
* 'component' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
component: remove device from master match list on failed add
component: Detach components when deleting master struct
component: fix crash on x86_64 with hda audio drivers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull more rdma fixes from Doug Ledford:
"I think we are getting pretty close to done now. There are four
one-off fixes in this update:
- fix ipoib multicast joins
- fix mlx4 error handling
- fix mlx5 size computation
- fix a thinko in core code"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/mlx5: Fix RC transport send queue overhead computation
IB/ipoib: fix for rare multicast join race condition
IB/core: Fix reading capability mask of the port info class
net/mlx4: fix some error handling in mlx4_multi_func_init()
|
|
Pull SCSI target fixes from Nicholas Bellinger:
"This includes the long awaited series to address a set of bugs around
active I/O remote-port LUN_RESET, as well as properly handling this
same case with concurrent fabric driver session disconnect ->
reconnect.
Note this set of LUN_RESET bug-fixes has been surviving extended
testing on both v4.5-rc1 and v3.14.y code over the last weeks, and is
CC'ed for stable as it's something folks using multiple ESX connected
hosts with slow backends can certainly trigger.
The highlights also include:
- Fix WRITE_SAME/DISCARD emulation 4k sector conversion in
target/iblock (Mike Christie)
- Fix TMR abort interaction and AIO type TMR response in qla2xxx
target (Quinn Tran + Swapnil Nagle)
- Fix >= v3.17 stale descriptor pointer regression in qla2xxx target
(Quinn Tran)
- Fix >= v4.5-rc1 return regression with unmap_zeros_data_store new
configfs store handler (nab)
- Add CPU affinity flag + convert qla2xxx to use bit (Quinn + HCH +
Bart)"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
qla2xxx: use TARGET_SCF_USE_CPUID flag to indiate CPU Affinity
target/transport: add flag to indicate CPU Affinity is observed
target: Fix incorrect unmap_zeroes_data_store return
qla2xxx: Use ATIO type to send correct tmr response
qla2xxx: Fix stale pointer access.
target/user: Fix cast from pointer to phys_addr_t
target: Drop legacy se_cmd->task_stop_comp + REQUEST_STOP usage
target: Fix race with SCF_SEND_DELAYED_TAS handling
target: Fix remote-port TMR ABORT + se_cmd fabric stop
target: Fix TAS handling for multi-session se_node_acls
target: Fix LUN_RESET active TMR descriptor handling
target: Fix LUN_RESET active I/O handling for ACK_KREF
qla2xxx: Fix TMR ABORT interaction issue between qla2xxx and TCM
qla2xxx: Fix warning reported by static checker
target: Fix WRITE_SAME/DISCARD conversion to linux 512b sectors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal management fixes from Eduardo Valentin:
"Specifics in this pull request:
- Compilation fixes on SPEAR, and U8500 thermal drivers.
- RCAR thermal driver now recognizes OF-thermal based thermal zones.
- Small code rework on OF-thermal.
- These change have been CI tested using KernelCI bot [1,2]. \o/
I am taking over on Rui's behalf while he is out. Happy New Chinese
Year!
[1] - https://kernelci.org/build/evalenti/kernel/v4.5-rc3-16-ga53b8394ec3c/
[2] - https://kernelci.org/boot/all/job/evalenti/kernel/v4.5-rc3-16-ga53b8394ec3c/"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
thermal: cpu_cooling: fix out of bounds access in time_in_idle
thermal: allow u8500-thermal driver to be a module
thermal: allow spear-thermal driver to be a module
thermal: spear: use __maybe_unused for PM functions
thermal: rcar: enable to use thermal-zone on DT
thermal: of: use for_each_available_child_of_node for child iterator
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"These are some Renesas binding updates for PCI host controllers, a
Broadcom fix for a regression we added in v4.5-rc1, and a fix for an
AER use-after-free problem that can cause memory corruption.
Summary:
AER:
Flush workqueue on device remove to avoid use-after-free (Sebastian Andrzej Siewior)
Broadcom iProc host bridge driver:
Allow multiple devices except on PAXC (Ray Jui)
Renesas R-Car host bridge driver:
Add gen2 device tree support for r8a7793 (Simon Horman)
Add device tree support for r8a7793 (Simon Horman)"
* tag 'pci-v4.5-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: rcar: Add device tree support for r8a7793
PCI: rcar: Add gen2 device tree support for r8a7793
PCI: iproc: Allow multiple devices except on PAXC
PCI/AER: Flush workqueue on device remove to avoid use-after-free
|
|
Fix the RC QPs send queue overhead computation to take into account
two additional segments in the WQE which are needed for registration
operations.
The ATOMIC and UMR segments can't coexist together, so chose maximum out
of them.
The commit 9e65dc371b5c ("IB/mlx5: Fix RC transport send queue overhead
computation") was intended to update RC transport as commit messages
states, but added the code to UC transport.
Fixes: 9e65dc371b5c ("IB/mlx5: Fix RC transport send queue overhead computation")
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
A narrow window for race condition still exist between
multicast join thread and *dev_flush workers.
A kernel crash caused by prolong erratic link state changes
was observed (most likely a faulty cabling):
[167275.656270] BUG: unable to handle kernel NULL pointer dereference at
0000000000000020
[167275.665973] IP: [<ffffffffa05f8f2e>] ipoib_mcast_join+0xae/0x1d0 [ib_ipoib]
[167275.674443] PGD 0
[167275.677373] Oops: 0000 [#1] SMP
...
[167275.977530] Call Trace:
[167275.982225] [<ffffffffa05f92f0>] ? ipoib_mcast_free+0x200/0x200 [ib_ipoib]
[167275.992024] [<ffffffffa05fa1b7>] ipoib_mcast_join_task+0x2a7/0x490
[ib_ipoib]
[167276.002149] [<ffffffff8109d5fb>] process_one_work+0x17b/0x470
[167276.010754] [<ffffffff8109e3cb>] worker_thread+0x11b/0x400
[167276.019088] [<ffffffff8109e2b0>] ? rescuer_thread+0x400/0x400
[167276.027737] [<ffffffff810a5aef>] kthread+0xcf/0xe0
Here was a hit spot:
ipoib_mcast_join() {
..............
rec.qkey = priv->broadcast->mcmember.qkey;
^^^^^^^
.....
}
Proposed patch should prevent multicast join task to continue
if link state change is detected.
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Changes from v4:
- as suggested by Doug Ledford, optimized spinlock usage,
i.e. ipoib_mcast_join() is called with lock held.
Changes from v3:
- sync with priv->lock before flag check.
Chages from v2:
- Move check for OPER_UP flag state to mcast_join() to
ensure no event worker is in progress.
- minor style fixes.
Changes from v1:
- No need to lock again if error detected.
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Pull MMC fixes from Ulf Hansson:
"Here are some mmc fixes intended for v4.5 rc4.
MMC core:
- Fix an sysfs ABI regression
- Return an error in a specific error path dealing with mmc ioctls
MMC host:
- sdhci-pci|acpi: Fix card detect race for Intel BXT/APL
- sh_mmcif: Correct TX DMA channel allocation
- mmc_spi: Fix error handling for dma mapping errors
- sdhci-of-at91: Fix an unbalance issue for the runtime PM usage count
- pxamci: Fix the device-tree probe deferral path
- pxamci: Fix read-only GPIO polarity"
* tag 'mmc-v4.5-rc2' of git://git.linaro.org/people/ulf.hansson/mmc:
Revert "mmc: block: don't use parameter prefix if built as module"
mmc: sdhci-acpi: Fix card detect race for Intel BXT/APL
mmc: sdhci-pci: Fix card detect race for Intel BXT/APL
mmc: sdhci: Allow override of get_cd() called from sdhci_request()
mmc: sdhci: Allow override of mmc host operations
mmc: sh_mmcif: Correct TX DMA channel allocation
mmc: block: return error on failed mmc_blk_get()
mmc: pxamci: fix the device-tree probe deferral path
mmc: mmc_spi: add checks for dma mapping error
mmc: sdhci-of-at91: fix pm runtime unbalanced issue in error path
mmc: pxamci: fix again read-only gpio detection polarity
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux
Pull fbdev fixes from Tomi Valkeinen:
- fix omap2plus_defconfig to enable omapfb as it was in v4.4
- ocfb: fix timings for margins
- s6e8ax0, da8xx-fb: fix compile warnings
- mmp: fix build failure caused by bad printk parameters
- imxfb: fix clock issue which kept the display off
* tag 'fbdev-fixes-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
video: fbdev: imxfb: Provide a reset mechanism
fbdev: mmp: print IRQ resource using %pR format string
fbdev: da8xx-fb: remove incorrect type cast
fbdev: s6e8ax0: avoid unused function warnings
ocfb: fix tgdel and tvdel timing parameters
ARM: omap2plus_defconfig: update display configs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A set of seven fixes:
Two regressions in the new hisi_sas arm driver, a blacklist entry for
the marvell console which was causing a reset cascade without it, a
race fix in the WRITE_SAME/DISCARD routines, a retry fix for the rdac
driver, without which, it would prematurely return EIO and a couple of
fixes for the hyper-v storvsc driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
block/sd: Return -EREMOTEIO when WRITE SAME and DISCARD are disabled
SCSI: Add Marvell Console to VPD blacklist
scsi_dh_rdac: always retry MODE SELECT on command lock violation
storvsc: Use the specified target ID in device lookup
storvsc: Install the storvsc specific timeout handler for FC devices
hisi_sas: fix v1 hw check for slot error
hisi_sas: add dependency for HAS_IOMEM
|
|
Pull drm amd fixes from Dave Airlie:
"Been pretty quiet.
This is an amdgpu fixes pull from AMD, a bunch of powerplay stability
fixes, race fix, hibernate fix, and a possible circular locking fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (21 commits)
drm/amdgpu: fix issue with overlapping userptrs
drm/radeon: hold reference to fences in radeon_sa_bo_new
drm/amdgpu: remove unnecessary forward declaration
drm/amdgpu: hold reference to fences in amdgpu_sa_bo_new (v2)
drm/amdgpu: fix s4 resume
drm/amdgpu/cz: plumb pg flags through to powerplay
drm/amdgpu/tonga: plumb pg flags through to powerplay
drma/dmgpu: move cg and pg flags into shared headers
drm/amdgpu: remove unused cg defines
drm/amdgpu: add a cgs interface to fetch cg and pg flags
drm/amd/powerplay/tonga: disable vce pg
drm/amd/powerplay/tonga: disable uvd pg
drm/amd/powerplay/cz: disable vce pg
drm/amd/powerplay/cz: disable uvd pg
drm/amdgpu: be consistent with uvd cg flags
drm/amdgpu: clean up vce pg flags for cz/st
drm/amdgpu: handle vce pg flags properly
drm/amdgpu: handle uvd pg flags properly
drm/amdgpu/dpm/ci: switch over to the common pcie caps interface
drm/amdgpu/cik: don't mess with aspm if gpu is root bus
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus
Kishon writes:
phy: for 4.5-rc
*) Fix error handling code in phy core [phy_power_on()]
*) phy-twl4030-usb fixes for unloading the module
*) Restrict phy-hi6220-usb to HiSilicon arm64
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
- Probe errorpath fix for the Altera
- irqchip ofnode pointer added to the DaVinci driver
- controller instance number correction for DaVinci
* tag 'gpio-v4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: davinci: Fix the number of controllers allocated
gpio: davinci: Add the missing of-node pointer
gpio: gpio-altera: Remove gpiochip on probe failure.
|
|
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver fixes from Darren Hart:
"Just two small fixes for the 4.5-rc cycle:
intel_scu_ipcutil:
- underflow in scu_reg_access()
intel-hid:
- fix incorrect entries in intel_hid_keymap"
* tag 'platform-drivers-x86-v4.5-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
intel_scu_ipcutil: underflow in scu_reg_access()
intel-hid: fix incorrect entries in intel_hid_keymap
|
|
Pull networking fixes from David Miller:
1) Fix BPF handling of branch offset adjustmnets on backjumps, from
Daniel Borkmann.
2) Make sure selinux knows about SOCK_DESTROY netlink messages, from
Lorenzo Colitti.
3) Fix openvswitch tunnel mtu regression, from David Wragg.
4) Fix ICMP handling of TCP sockets in syn_recv state, from Eric
Dumazet.
5) Fix SCTP user hmacid byte ordering bug, from Xin Long.
6) Fix recursive locking in ipv6 addrconf, from Subash Abhinov
Kasiviswanathan.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
bpf: fix branch offset adjustment on backjumps after patching ctx expansion
vxlan, gre, geneve: Set a large MTU on ovs-created tunnel devices
geneve: Relax MTU constraints
vxlan: Relax MTU constraints
flow_dissector: Fix unaligned access in __skb_flow_dissector when used by eth_get_headlen
of: of_mdio: Add marvell, 88e1145 to whitelist of PHY compatibilities.
selinux: nlmsgtab: add SOCK_DESTROY to the netlink mapping tables
sctp: translate network order to host order when users get a hmacid
enic: increment devcmd2 result ring in case of timeout
tg3: Fix for tg3 transmit queue 0 timed out when too many gso_segs
net:Add sysctl_max_skb_frags
tcp: do not drop syn_recv on all icmp reports
ipv6: fix a lockdep splat
unix: correctly track in-flight fds in sending process user_struct
update be2net maintainers' email addresses
dwc_eth_qos: Reset hardware before PHY start
ipv6: addrconf: Fix recursive spin lock call
|
|
When checking specific attribute from a bit mask, need to use bitwise
AND and not logical AND, fixed that.
Fixes: 145d9c541032 ('IB/core: Display extended counter set if
available')
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The while loop after err_slaves should use post-decrement; otherwise
we'll fail to do the kfrees for i==0, and will run into out-of-bounds
accesses if the setup above failed already at i==0.
[I'm not sure why one even bothers populating the ->vlan_filter array:
mlx4.h isn't #included by anything outside
drivers/net/ethernet/mellanox/mlx4/, and "git grep -C2 -w vlan_filter
drivers/net/ethernet/mellanox/mlx4/" seems to suggest that the
vlan_filter elements aren't used at all.]
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This reverts commit 829b6962f7e3cfc06f7c5c26269fd47ad48cf503.
Revert this change as it causes a sysfs path to change and therefore
introduces and ABI regression. More precisely Android's vold is not being
able to access /sys/module/mmcblk/parameters/perdev_minors any more, since
the path becomes changed to: "/sys/module/mmc_block/..."
Fixes: 829b6962f7e3 ("mmc: block: don't use parameter prefix if built as
module")
Reported-by: John Stultz <john.stultz@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In __cpufreq_cooling_register() we allocate the arrays for time_in_idle
and time_in_idle_timestamp to be as big as the number of cpus in this
cpufreq device. However, in get_load() we access this array using the
cpu number as index, which can result in an out of bound access.
Index time_in_idle{,_timestamp} using the index in the cpufreq_device's
allowed_cpus mask, as we do for the load_cpu array in
cpufreq_get_requested_power()
Reported-by: Nicolas Boichat <drinkcat@chromium.org>
Cc: Amit Daniel Kachhap <amit.kachhap@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
Intel BXT/APL use a card detect GPIO however the host controller
will not enable bus power unless it's card detect also reflects
the presence of a card. Unfortunately those 2 things race which
can result in commands not starting, after which the controller
does nothing and there is a 10 second wait for the driver's
10-second timer to timeout.
That is fixed by having the driver look also at the present state
register to determine if the card is present. Consequently, provide
a 'get_cd' mmc host operation for BXT/APL that does that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Intel BXT/APL use a card detect GPIO however the host controller
will not enable bus power unless it's card detect also reflects
the presence of a card. Unfortunately those 2 things race which
can result in commands not starting, after which the controller
does nothing and there is a 10 second wait for the driver's
10-second timer to timeout.
That is fixed by having the driver look also at the present state
register to determine if the card is present. Consequently, provide
a 'get_cd' mmc host operation for BXT/APL that does that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Drivers may need to provide their own get_cd() mmc host op, but
currently the internals of the current op (sdhci_get_cd()) are
provided by sdhci_do_get_cd() which is also called from
sdhci_request().
To allow override of the get_cd functionality, change sdhci_request()
to call ->get_cd() instead of sdhci_do_get_cd().
Note, in the future the call to ->get_cd() will likely be removed
from sdhci_request() since most drivers don't need actually it.
However this change is being done now to facilitate a subsequent
bug fix.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In the past, fixes for specific hardware devices were implemented
in sdhci using quirks. That approach is no longer accepted because
the growing number of quirks was starting to make the code difficult
to understand and maintain.
One alternative to quirks, is to allow drivers to override the default
mmc host operations. This patch makes it easy to do that, and it is
needed for a subsequent bug fix, for which separate patches are
provided.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
EOImode1 is only used for the root controller and hence only the root
controller uses the eoimode1 functions for handling interrupts. However,
if the root controller supports EOImode1, then the EOImodeNS bit will be
set for all GICs, enabling EOImode1. This is not what we want and this
causes interrupts on non-root GICs to only be dropped in priority but
never deactivated. Therefore, only set the EOImodeNS bit for the root
controller.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Setting the affinity of an IRQ, it only applicable for the root
interrupt controller and so only populate this operator for the root
controller.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Calling component_add() may result in the completion of a set of
devices, which will try to bring up a master. In bringing the master
up, we populate its match array with the current set of children.
If binding any of the devices fails, component_add() itself will fail,
free the struct component entry, and return to the caller. The
now-freed entry is never removed from the master's match array, and
will later be used in a futile attempt to bind to freed memory.
Bring component_add's behaviour on failure to bring up a master into
line with component_del by removing the (to-be-freed) component from
the master's match array.
The specific case which broke was:
- rockchip_drm_drv adds a component master
- dwhdmi_rockchip adds a child component in probe (master incomplete)
- rockchip_drm_vop adds two children in probe, which completes the
set
- inside component_add, we try to bring up the master, having
populated the master's match array, and fail with EPROBE_DEFER from
dwhdmi_rockchip; we delete the putative component
- rockchip_drm_vop's probe fails and returns EPROBE_DEFER
- we later re-probe rockchip_drm_vop and add the component; the
master is complete, so we attempt to bring it up again
- walking the match array, we find the previous child, whose master
pointer doesn't match (as it has been freed in the meantime)
- rockchip_drm_vop probe fails, and will never be attempted again
Fixes: ffc30b74fd6d01588bd3fdebc3b1acc0857e6fc8
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Fixes: fb3269b ("qla2xxx: Add selective command queuing")
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Fixes: fb3269b ("qla2xxx: Add selective command queuing")
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
This patch fixes an incorrect return of zero from the new
unmap_zeroes_data_store() configfs store attribute handler
introduced in v4.5-rc1, to use the correct 'count' bytes
return value.
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"A few more minor fixes for rc3:
- One fix to ipoib
- One fix to core sysfs code
- Four patches that resolve an oops found in testing of ocrdma and a
couple other ocrdma issues"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
RDMA/ocrdma: Fixing ocrdma debugfs directory remove
RDMA/ocrdma: Fix pkey_index returned by driver in rq work completion
RDMA/ocrdma: populate max_sge_rd in device attributes
RDMA/ocrdma: Initialize stats resources in the driver before ib device registration.
IB/sysfs: remove unused va_list args
IB/IPoIB: Do not set skb truesize since using one linearskb
|
|
into drm-fixes
radeon and amdgpu fixes for 4.5. Highlights:
- powerplay fixes for amdgpu
- race fixes in the sub-allocator in radeon and amdgpu
- hibernate fix for amdgpu
- fix a possible circular locking in userptr handling in amdgpu
* 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux: (21 commits)
drm/amdgpu: fix issue with overlapping userptrs
drm/radeon: hold reference to fences in radeon_sa_bo_new
drm/amdgpu: remove unnecessary forward declaration
drm/amdgpu: hold reference to fences in amdgpu_sa_bo_new (v2)
drm/amdgpu: fix s4 resume
drm/amdgpu/cz: plumb pg flags through to powerplay
drm/amdgpu/tonga: plumb pg flags through to powerplay
drma/dmgpu: move cg and pg flags into shared headers
drm/amdgpu: remove unused cg defines
drm/amdgpu: add a cgs interface to fetch cg and pg flags
drm/amd/powerplay/tonga: disable vce pg
drm/amd/powerplay/tonga: disable uvd pg
drm/amd/powerplay/cz: disable vce pg
drm/amd/powerplay/cz: disable uvd pg
drm/amdgpu: be consistent with uvd cg flags
drm/amdgpu: clean up vce pg flags for cz/st
drm/amdgpu: handle vce pg flags properly
drm/amdgpu: handle uvd pg flags properly
drm/amdgpu/dpm/ci: switch over to the common pcie caps interface
drm/amdgpu/cik: don't mess with aspm if gpu is root bus
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
"Just small driver fixups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: colibri-vf50-ts - add missing #include <linux/of.h>
Input: adp5589 - fix row 5 handling for adp5589
Input: edt-ft5x06 - fix setting gain, offset, and threshold via device tree
Input: vmmouse - fix absolute device registration
Input: serio - drop warnings in case of EPROBE_DEFER from serio_find_driver()
Input: cap11xx - add missing of_node_put
Input: sirfsoc-onkey - allow modular build
Input: xpad - remove unused function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
- PORTS_IMPL workaround for very early ahci controllers is misbehaving
on new systems. Disabled on recent ahci versions.
- Old-style PIO state machine had a horrible locking problem. Don't
know how we've been getting away this far. Fixed.
- Other device specific updates.
* 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ahci: Intel DNV device IDs SATA
libata: fix sff host state machine locking while polling
libata-sff: use WARN instead of BUG on illegal host state machine state
libata: disable forced PORTS_IMPL for >= AHCI 1.3
libata: blacklist a Viking flash model for MWDMA corruption
drivers: ata: wake port before DMA stop for ALPM
|
|
Otherwise we could try to evict overlapping userptr BOs in get_user_pages(),
leading to a possible circular locking dependency.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
An arbitrary amount of time can pass between spin_unlock and
radeon_fence_wait_any, so we need to ensure that nobody frees the
fences from under us.
Based on the analogous fix for amdgpu.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
|
|
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
|
|
An arbitrary amount of time can pass between spin_unlock and
fence_wait_any_timeout, so we need to ensure that nobody frees the
fences from under us.
A stress test (rapidly starting and killing hundreds of glxgears
instances) ran into a deadlock in fence_wait_any_timeout after
about an hour, and this race condition appears to be a plausible
cause.
v2: agd: rebase on upstream
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
|
|
No need to re-init asic if it's already been initialized.
Skip IB tests since kernel processes are frozen in thaw.
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Adding Intel codename DNV platform device IDs for SATA.
Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
|
|
Commit 27cbd7e815a8 ("mmc: sh_mmcif: rework dma channel handling")
introduced a typo causing the TX DMA channel allocation to be overwritten
by the requested RX DMA channel.
Fixes: 27cbd7e815a8 ("mmc: sh_mmcif: rework dma channel handling")
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Prior to 4.3, openvswitch tunnel vports (vxlan, gre and geneve) could
transmit vxlan packets of any size, constrained only by the ability to
send out the resulting packets. 4.3 introduced netdevs corresponding
to tunnel vports. These netdevs have an MTU, which limits the size of
a packet that can be successfully encapsulated. The default MTU
values are low (1500 or less), which is awkwardly small in the context
of physical networks supporting jumbo frames, and leads to a
conspicuous change in behaviour for userspace.
Instead, set the MTU on openvswitch-created netdevs to be the relevant
maximum (i.e. the maximum IP packet size minus any relevant overhead),
effectively restoring the behaviour prior to 4.3.
Signed-off-by: David Wragg <david@weave.works>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow the MTU of geneve devices to be set to large values, in order to
exploit underlying networks with larger frame sizes.
GENEVE does not have a fixed encapsulation overhead (an openvswitch
rule can add variable length options), so there is no relevant maximum
MTU to enforce. A maximum of IP_MAX_MTU is used instead.
Encapsulated packets that are too big for the underlying network will
get dropped on the floor.
Signed-off-by: David Wragg <david@weave.works>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow the MTU of vxlan devices without an underlying device to be set
to larger values (up to a maximum based on IP packet limits and vxlan
overhead).
Previously, their MTUs could not be set to higher than the
conventional ethernet value of 1500. This is a very arbitrary value
in the context of vxlan, and prevented vxlan devices from being able
to take advantage of jumbo frames etc.
The default MTU remains 1500, for compatibility.
Signed-off-by: David Wragg <david@weave.works>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Driver only needs to allocate for [ngpio / 32] controllers,
as each controller handles 32 gpios. But the current driver
allocates for ngpio of which the extra allocated are unused.
Fix it be registering only the required number of controllers.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Currently the first parameter of irq_domain_add_legacy is NULL.
irq_find_host function returns NULL when we do not populate the of_node
and hence irq_of_parse_and_map call fails whenever we want to request a
gpio irq. This fixes the request_irq failures for gpio interrupts.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|