summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-10-16tpm: work around bug in Broadcom BCM0102 chipsetValdis Kletnieks
Patch tpm-correct-tpm-timeouts-to-jiffies-conversion reveals a bug in the Broadcom BCM0102 TPM chipset used in the Dell Latitude D820 - although most of the timeouts are returned in usecs as per the spec, one is apparently returned in msecs, which results in a too-small value leading to a timeout when the code treats it as usecs. To prevent a regression, we check for the known too-short value and adjust it to a value that makes things work. Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Cc: Marcin Obara <marcin_obara@users.sourceforge.net> Cc: Marcel Selhorst <tpm@selhorst.net> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16tpm: correct tpm timeouts to jiffies conversionMarcin Obara
This patch fixes timeouts conversion to jiffies, by replacing msecs_to_jiffies() calls with usecs_to_jiffies(). According to TCG TPM Specification Version 1.2 Revision 103 (pages 166, 167) TPM timeouts and durations are returned in microseconds (usec) not in miliseconds (msec). This fixes a long hang while loading TPM driver, if TPM chip starts in "Idle" state instead of "Ready" state. Without this patch - 'modprobe' may hang for 30 seconds or more. Signed-off-by: Marcin Obara <marcin_obara@users.sourceforge.net> Cc: Marcel Selhorst <tpm@selhorst.net> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16parport: remove CVS keywordsAdrian Bunk
Remove CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16edac i5000: fix thermal issuesAristeu Rozanski
Make the Thermal messages (temperature got past Tmid) be displayed only once because: 1) it's the BIOS job to configure and handle the memory throttling 2) if the BIOS is broken or is aware about the condition, flooding the system logs won't help anything. 3) According to the specification update for Intel 5000 MCHs, all the revisions of this MCH have problems on the thermal sensors, making not automatic (a.k.a. intelligent thermal throttling) impossible. Signed-off-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16edac i5000: fix error messagesAristeu Rozanski
Update the i5000_edac messages, making everything pass through the EDAC (so the log controls will work) and being more specific about the errors. Also, it makes the miscellaneous errors optional and disabled by default. As I didn't found anywhere information about M23ERR-M26ERR (FERR_NF_THERMAL) on FERR_NF_FBD, I'm removing them. Signed-off-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16edac mpc85xx: add support for mpc8572Andrew Kilkenny
This adds support for the dual-core MPC8572 processor. We have to support making SPR changes on each core. Also, since we can have multiple memory controllers sharing an interrupt, flag the interrupts with IRQF_SHARED. Signed-off-by: Andrew Kilkenny <akilkenny@xes-inc.com> Signed-off-by: Nate Case <ncase@xes-inc.com> Acked-by: Dave Jiang <djiang@mvista.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16edac: make i82443bxgx_edac coexist with intel_agpVladislav Bogdanov
Fix 443BX/GX MCH suppport in a EDAC. It makes i82443bxgx_edac coexist with intel_agp using the same approach as several other EDAC drivers. Tested on Intel's L443GX with redhat's 2.6.18 with whole EDAC subsystem backported a while ago. [root@host ~]# dmesg|grep -iE '(AGP|EDAC)' Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 440GX Chipset. agpgart: AGP aperture is 64M @ 0xf8000000 EDAC MC: Ver: 2.1.0 Jun 27 2008 EDAC MC0: Giving out device to 'i82443bxgx_edac' 'I82443BXGX': DEV 0000:00:00.0 EDAC PCI0: Giving out device to module 'i82443bxgx_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED) Signed-off-by: Vladislav Bogdanov <slava@nsys.by> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16sysctl: simplify ->strategyAlexey Dobriyan
name and nlen parameters passed to ->strategy hook are unused, remove them. In general ->strategy hook should know what it's doing, and don't do something tricky for which, say, pointer to original userspace array may be needed (name). Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> [ networking bits ] Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: Matt Mackall <mpm@selenic.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16proc: move sysrq-trigger out of fs/proc/Alexey Dobriyan
Move it into sysrq.c, along with the rest of the sysrq implementation. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16firmware: use dev_printk when possibleBjorn Helgaas
Convert printks to use dev_printk(). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16char: moxa.c sparse annotationHarvey Harrison
The only use is to pass this to le16_to_cpu, declare as such drivers/char/moxa.c:548:11: warning: cast to restricted __le16. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16applicom.c: fix apparently-broken code in do_ac_read()Andrew Morton
The code scriblles over a local pointer whereas it appears to be trying to write to the memory at which that pointer points. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11397 Nobody we know can test this change. Reported-by: Zvonimir Rakamaric <zrakamar@cs.ubc.ca> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16Char: ds1286, eliminate busy waitingJiri Slaby
ds1286_get_time(); is not called from atomic context, sleep for 20 ms is better choice than a (home-made) busy waiting for such a situation. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16telephony: remove CVS keywordsAdrian Bunk
Remove CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16pnp: make the resource type an unsigned longRene Herman
PnP encodes the resource type directly as its struct resource->flags value which is an unsigned long. Make it so... Signed-off-by: Rene Herman <rene.herman@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16pnp: remove printk() with outdated versionAdrian Bunk
There's no point in printing some ancient version number forever. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Rene Herman <rene.herman@gmail.com> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Adam M Belay <abelay@MIT.EDU> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16fbcon_set_all_vcs: fix kernel crash when switching the rotated consolesOleg Nesterov
echo 3 >> /sys/class/graphics/fbcon/rotate_all, then switch to another console. Result: BUG: unable to handle kernel paging request at ffffc20005d00000 IP: [bitfill_aligned+149/265] bitfill_aligned+0x95/0x109 PGD 7e228067 PUD 7e229067 PMD 7bc1f067 PTE 0 Oops: 0002 [1] SMP CPU 1 Modules linked in: [...a lot...] Pid: 10, comm: events/1 Not tainted 2.6.26.5-45.fc9.x86_64 #1 RIP: 0010:[bitfill_aligned+149/265] [bitfill_aligned+149/265] bitfill_aligned+0x95/0x109 RSP: 0018:ffff81007d811bc8 EFLAGS: 00010216 RAX: ffffc20005d00000 RBX: 0000000000000000 RCX: 0000000000000400 RDX: 0000000000000000 RSI: ffffc20005d00000 RDI: ffffffffffffffff RBP: ffff81007d811be0 R08: 0000000000000400 R09: 0000000000000040 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000010000 R13: ffffffff811632f0 R14: 0000000000000006 R15: ffff81007cb85400 FS: 0000000000000000(0000) GS:ffff81007e004780(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: ffffc20005d00000 CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process events/1 (pid: 10, threadinfo ffff81007d810000, task ffff81007d808000) Stack: ffff81007c9d75a0 0000000000000000 0000000000000000 ffff81007d811c80 ffffffff81163a61 ffff810000000000 ffffffff8115f9c8 0000001000000000 0000000100aaaaaa 000000007cd0d4a0 fffffd8a00000800 0001000000000000 Call Trace: [cfb_fillrect+523/798] cfb_fillrect+0x20b/0x31e [soft_cursor+416/436] ? soft_cursor+0x1a0/0x1b4 [ccw_clear_margins+205/263] ccw_clear_margins+0xcd/0x107 [fbcon_clear_margins+59/61] fbcon_clear_margins+0x3b/0x3d [fbcon_switch+1291/1466] fbcon_switch+0x50b/0x5ba [redraw_screen+261/481] redraw_screen+0x105/0x1e1 [ccw_cursor+0/1869] ? ccw_cursor+0x0/0x74d [complete_change_console+48/190] complete_change_console+0x30/0xbe [change_console+115/120] change_console+0x73/0x78 [console_callback+0/292] ? console_callback+0x0/0x124 [console_callback+97/292] console_callback+0x61/0x124 [schedule_delayed_work+25/30] ? schedule_delayed_work+0x19/0x1e [run_workqueue+139/282] run_workqueue+0x8b/0x11a [worker_thread+221/238] worker_thread+0xdd/0xee [autoremove_wake_function+0/56] ? autoremove_wake_function+0x0/0x38 [worker_thread+0/238] ? worker_thread+0x0/0xee [kthread+73/118] kthread+0x49/0x76 [child_rip+10/18] child_rip+0xa/0x12 [kthread+0/118] ? kthread+0x0/0x76 [child_rip+0/18] ? child_rip+0x0/0x12 Because fbcon_set_all_vcs()->FBCON_SWAP() uses display->rotate == 0 instead of fbcon_ops->rotate, and vc_resize() has no effect because it is called with new_cols/rows == ->vc_cols/rows. Tested on 2.6.26.5-45.fc9.x86_64, but http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git seems to have the same problem. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: <stable@kernel.org> [2.6.27.x, 2.6.26.x, maybe 2.6.25.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16fbdev: add new TMIO framebuffer driverDmitry Baryshkov
Add driver for TMIO framebuffer cells as found e.g. in Toshiba TC6393XB chips. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Ian Molton <spyro@f2s.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16framebuffer: fix carminefb section mismatchRandy Dunlap
Make alloc_carmine_fb() __devinit. WARNING: drivers/video/carminefb.o(.text+0x81b): Section mismatch in reference from the function alloc_carmine_fb() to the variable .devinit.data:carminefb_fix The function alloc_carmine_fb() references the variable __devinitdata carminefb_fix. This is often because alloc_carmine_fb lacks a __devinitdata annotation or the annotation of carminefb_fix is wrong. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16matroxfb: support G200eV chipDarrick J. Wong
Support the Matrox G200eV chip, based on timings that I found in the X.org matrox driver. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Petr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16fbdev: allow more chip revisions in Epson s1d13... video driverKristoffer Ericson
The Epson s1d13xxx hardware is common in many handhelds, but our driver is currently locked to a single chip revision. This patch adds an array of known to work revisions (which can be extended). [akpm@linux-foundation.org: cleanups] Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Acked-by: Thibaut Varène <varenet@parisc-linux.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16fbdev: ignore VESA modes if framebuffer does not support themMichal Januszewski
Currently, it is possible to set a graphics VESA mode at boot time via the vga= parameter even when no framebuffer driver supporting this is configured. This could lead to the system booting with a black screen, without a usable console. Fix this problem by only allowing to set graphics modes at boot time if a supporting framebuffer driver is configured. Signed-off-by: Michal Januszewski <spock@gentoo.org> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16vgacon: vgacon_scrolldelta simplificationMarcin Slusarz
There's no point in checking diff == c->vc_rows, because it can be true only when count == 0, but we already checked that. Additionally move variables used only in one block to this block. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Antonino Daplas <adaplas@gmail.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16vgacon: optimize scrollingMarcin Slusarz
Join multiple scr_memcpyw into 1-3 calls (usually 2). (benchmarked average speedup: 1%) Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16fbmon: fix EDID parser to detect interlace modesJon Dufresne
The current EDID parser in the linux kernel ignores interlace modes. The patch looks for the edid interlace flag and adjusts the vertical resolution if it is found. Signed-off-by: Jon Dufresne <jon.dufresne@gmail.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16uvesafb: don't treat mode info retrieval failures as errorsMichal Januszewski
Some BIOSes return error codes when queried for information about modes from their own modelist. uvesafb treats this as an error case and bails out. Change this behavior so that broken modes do not prevent the driver from working. Only the failure to retrieve information about any usable video mode is considered to be an error case. Signed-off-by: Michal Januszewski <spock@gentoo.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16radeonfb: accelerate imageblit and other improvementsBenjamin Herrenschmidt
Implement support for HW color expansion of 1bpp images, along with some improvements to the FIFO handling and other accel operations. The offset fixup code is now unnecessary as the fbcon core will call our set_par upon switch back from KD_GRAPHICS before anything else happens. I removed it as it would slow down accel operations. The fifo wait has been improved to avoid hitting the HW register as often, and the various accel ops are now performing better caching of register values. Overall, this improve accel performances. The imageblit acceleration does result in a small overall regression in performances on some machines (on the order of 5% on some x86), probably becaus the SW path provides a better bus utilisation, but I decided to ingnore that as the performances is still very good, and on the other hand, some machines such as some sparc64 get a 3 fold performance improvement. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16radeonfb: misc cleanup of engine and dst cache handlingBenjamin Herrenschmidt
Fix a couple of incomplete tests of the chip families in the engine init/reset code and proper initialization of the destination cache mode. The result should better match what the latest X radeon driver does. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16efifb/imacfb consolidation + hardware supportPeter Jones
Remove imacfb entirely, merging its DMI table into the (otherwise very similar) efifb driver. This also adds hardware support for many of the newer Intel Apple hardware. This has been fairly well tested; we've been shipping it in Fedora for some time. Signed-off-by: Peter Jones <pjones@redhat.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16atmel_lcdfb: disallow setting larger resolution than the framebuffer memory ↵Stanislaw Gruszka
can handle Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16cirrusfb: do not change MCLK for Alpine chipsKrzysztof Helt
A memory clock value (MCLK) is changed to a minimum required by a current mode bandwidth. This usually lowers the MCLK to its minimum (50 MHz) thus decreasing the card performance. Just leave the MCLK value set by card BIOS. The CL-GD5446 Technical Reference Manual point 9.9.1.3 states that if a pixclock value is close (~1%) to the MCLK or MCLK/2 this may result in a jitter on the screen. A countermeasure is to use the MCLK as pixclock source instead of a VCLK. The patch implements this as well. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16cirrusfb: fix 16bpp modesKrzysztof Helt
The 16bpp mode did not work on the Cirrus cards as the visual type was set to DIRECTCOLOR instead of TRUECOLOR. The Alpine family used one incorrect register setting so this 16bpp modes generated wrong horizontal frequency. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16cirrusfb: add noaccel module parameterKrzysztof Helt
The noaccel parameter is already handled if the driver is not built as module. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16cirrusfb: drop clock fields from cirrusfb_regs structureKrzysztof Helt
Move call to pixclock calculation into the cirrusfb_set_par_foo(). It makes copy of clock registers redundant. Simplify clock calculations further. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16cirrusfb: eliminate CRT registers from global structureKrzysztof Helt
Move calculations of CRT register values into the cirrusfb_set_par_foo() where the values are used. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16cirrusfb: add __devinit attribute to probing functionsKrzysztof Helt
Add __devinit attribute to probing functions. This fixed section mismatch warning from my previous patch. Kill one redundant forward declaration. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16cirrusfb: use modedb and add mode_option parameterKrzysztof Helt
Use modedb for initial mode instead of table of few predefined modes. Add mode_option module parameter as a step toward unification of frame buffers' parameters. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16cirrusfb: drop device pointers from cirrusfb_infoKrzysztof Helt
The device pointer can be easily obtained from fb_info->device if needed. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16cirrusfb: remove 24 bpp modeKrzysztof Helt
The 24 bpp mode is not implemented. Disallow it in the cirrusfb_check_var() and remove it from checks. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16cirrusfb: simplify clock calculationKrzysztof Helt
Simplify clock calculation. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16cirrusfb: remove information about memory size during mode changeKrzysztof Helt
Remove information about memory size displayed twice each time a display mode change. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16intelfb: support 945GME (as used in ASUS Eee 901)Phil Endecott
Add support for Intel's 945GME graphics chip to the intelfb driver. I have assumed that the 945GME is identical to the already-supported 945GM apart from its PCI IDs; this is based on a quick look at the X driver for these chips which seems to treat them identically. The 945GME is used in the ASUS Eee 901, and I coded this in the hope that I'd be able to use it to get a console at the native 1024x600 resolution which is not known to the BIOS. I realised too late that the intelfb driver does not support mode changing on laptops, so it won't be any use for me. Signed-off-by: Phil Endecott <spam_from_intelfb@chezphil.org> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16tdfxfb: do not make changes to default tdfx_fixKrzysztof Helt
This was suggested by Geert Uytterhoeven to avoid overwriting of default values from the tdfx_fix. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16neofb: remove open_lock mutexKrzysztof Helt
Remove mutex from the fb_open/fb_release functions as these operations are mutexed at fb layer. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16vga16fb: remove open_lock mutexKrzysztof Helt
Remove mutex from the fb_open/fb_release functions as these operations are mutexed at fb layer. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16neofb: kill some redundant codeKrzysztof Helt
Move common code outside if/else or switch/case clauses. Drop checks done twice inside the neofb_check_var(). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16fbdev: kconfig updateKrzysztof Helt
Update Kconfig for Permedia 2, Trident and 3Dfx frame buffer drivers. [akpm@linux-foundation.org: fix Kconfig text] Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16viafb: via_utility.c, via_utility.h, vt1636.c, vt1636.hJoseph Chan
via_utility.c, via_utility.h: support user mode application with additional information vt1636.c, vt1636.h: setting for chip vt1636 Signed-off-by: Joseph Chan <josephchan@via.com.tw> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16viafb: via_i2c.c, via_i2c.h, viamode.c, viamode.hJoseph Chan
via_i2c.c, via_i2c.h: Implement i2c specification. viamode.c, viamode.c: all support modes information. Signed-off-by: Joseph Chan <josephchan@via.com.tw> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16viafb: viafbdev.c (update)Joseph Chan
Remove the macro MMIO_OUT32, and replace it with writel() function. And replace "u32" with "unsigned long" in writel() function (original MMIO_OUT32 marco) for avoiding warning message in 64bit OS. Signed-off-by: Joseph Chan <josephchan@via.com.tw> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 13:14:39 +0000